How do I mark complete based on slide views only and not report a score

I am having a problem with the e-learning modules that I am producing in Captivate 4 (and previously 3). The modules do not contain any quiz and I am only interested in having them report a complete/incomplete based on if the user have viewed 80% of the slide. I am not really interested in reporting any score since I am not using a quiz.
Currently the courses gets marked as complete but with a score of 0%, which obiously some users find strange..
Since I only have the option to change the score reporting to be based on score or percenatge I am trying to find where I can change the imsmanifest to send the score - BLANK or NULL instead of 0. I have been looking through the imsmanifest it self and the files in the scorm support folder - but cannot figure where I would do this change.
Any suggestions?

Hi Andrew,
I tried this with a slight change in the code (I think there where a / when commenting out the second line of the code):
} else if ( strFSCmd == "LMSSetValue" || strFSCmd=="SetValue") {
// AEC: OVERRIDE BEHAVIOR
if(strFSArg1.indexOf("raw") > -1)
strErr = "";
} else if (strFSArg1.indexOf("max") > -1) {
strErr = "";
} else if (strFSArg1.indexOf("min") > -1) {
strErr = "";
} else {
strErr = eval('g_objAPI.' + strFSCmd + '(\"' + strFSArg1 + '\",\"' + strFSArg2 + '\");');
// AEC: END OVERRIDE BEHAVIOR
CaptivateObj.SetVariable(strFSArg3, strErr);
However for some reason my LMS still report a score (this time 100% which is much better than 0...) on the course that I tested this on. I was expecting no score to be sent. Can this be due to how the LMS is interpreting what is being sent or is there something that I am missing?
One more question - in which folder do I find the SCORM.htm template file? I thought it was a great idea to create a custom on and was looking for it in the progam file on my compter - but couldn't find it...

Similar Messages

How can I email a photo as an attachment only and not as a photo in the body of the email?in the message

How can I send a photo as an attachment only and not in the body of the email?

Just drop it into the message. It goes as an attachment. Or select the image, CTRL- or RIGHT-click and select Compress .... from the context menu. Then attach the archive.

Slide views only to be reported, but grade is reporting to lms as 0 instead of n/a

My client has a number of quiz questions throughout their course. They asked that the quiz be set up to allow infinite attempts until the learner gets the answer right, and that there are no points or grade associated with the quiz. I've set up each question as a quiz question, but set the grade to be 0. I did it as a quiz question as there are matching type questions, multiple choice, etc. and I found it valuable to have the structure in place to add in the content. The reporting preferences are set up as to report back slide views only, but when this file communicates with the LMS, it is reporting back a pass/complete but giving a grade of 0. I'd like it to show up as n/a under the grade rather than 0.
Also, this course isn't booking marking and learners aren't happy because when they go back in their answers aren't saving. As well, the client wanted backward movement to be allowed but when the learner clicks the back button to go back through the slides, it automatically resets the question slides and they have to re-answer them to continue. Is there a way to change a setting so that the answers will stay in place?
And my last question (promise, sorry for so many) under the quiz settings and then required there are 4 options. I'm just wondering if anyone can explain these 4 options and what each do, so that I can make sure I'm selecting the best one. Up until now it's been a trial/error type of thing, but it would be great if anyone can share some additional info.

Thanks so much! I'm the only one working in Captivate, and so I can't even tell you how helpful it is to have replies and people that understand what I'm asking.
I looked into the manifest file, but I couldn't seem to find the masteryscore text. Here's a copy and paste of my manifest file. Am I missing something?
<?xml version="1.0" encoding="UTF-8" ?>
<manifest identifier="captivate client and family centred care_ID" version="1.3" xmlns="http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:imscp="http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:adlcp="http://www.adlnet.org/xsd/adlcp_v1p3"
xmlns:imsss="http://www.imsglobal.org/xsd/imsss"
xsi:schemaLocation="http://www.imsglobal.org/xsd/imscp_v1p1 imscp_v1p1.xsd
      http://www.adlnet.org/xsd/adlcp_v1p3 adlcp_v1p3.xsd
      http://www.imsglobal.org/xsd/imsss imsss_v1p0.xsd
      http://ltsc.ieee.org/xsd/LOM lomStrict.xsd">
<metadata>
<schema>ADL SCORM</schema>
<schemaversion>CAM 1.3</schemaversion>
<lom xmlns="http://ltsc.ieee.org/xsd/LOM">
   <general>
    <identifier>
     <catalog>Adobe Captivate Course</catalog>
     <entry>captivate client and family centred care_ID</entry>
    </identifier>
    <title>
     <string language="x-none">captivate client and family centred care_Course_Title</string>
    </title>
    <description>
     <string language="x-none"></string>
    </description>
    <keyword>
     <string language="x-none"></string>
    </keyword>
   </general>
   <lifeCycle>
    <version>
     <string language="x-none">1.0</string>
    </version>
    <status>
     <source>LOMv1.0</source>
     <value>final</value>
    </status>
   </lifeCycle>
   <metaMetadata>
    <identifier>
     <catalog>test</catalog>
     <entry>test 1000</entry>
    </identifier>
    <metadataSchema>LOMv1.0</metadataSchema>
    <metadataSchema>SCORM_CAM_v1.3</metadataSchema>
   </metaMetadata>
   <technical>
    <format>text/html</format>
    <location>.</location>
   </technical>
   <educational>
    <typicalLearningTime>
     <duration>PT0H0M</duration>
     <description>
      <string language="x-none">Average length of time to experience this Adobe Captivate Project.</string>
     </description>
    </typicalLearningTime>
   </educational>
   <rights>
    <cost>
     <source>LOMv1.0</source>
     <value>no</value>
    </cost>
    <copyrightAndOtherRestrictions>
     <source>LOMv1.0</source>
     <value>no</value>
    </copyrightAndOtherRestrictions>
   </rights>
   <classification>
    <purpose>
     <source>LOMv1.0</source>
     <value>idea</value>
    </purpose>
    <description>
     <string language="x-none"></string>
    </description>
    <keyword>
     <string language="x-none">Adobe Captivate</string>
     <string language="x-none"></string>
    </keyword>
   </classification>
</lom>
</metadata>
<organizations default="captivate client and family centred care_ID_ORG">
<organization identifier="captivate client and family centred care_ID_ORG">
   <title>captivate client and family centred care_Course_Title</title>
   <item identifier="captivate client and family centred care_ID_SCO" isvisible="true" identifierref="captivate client and family centred care_ID_SCO_RES">
    <title>captivate client and family centred care_SCO_Title</title>
    <imsss:sequencing>
     <imsss:objectives>
      <imsss:primaryObjective objectiveID="PRIMARYOBJ" satisfiedByMeasure="false">
      </imsss:primaryObjective>
     </imsss:objectives>
     
     <imsss:deliveryControls completionSetByContent="true" objectiveSetByContent="true"/>
    </imsss:sequencing>
    <adlcp:dataFromLMS>.</adlcp:dataFromLMS>
    <adlcp:timeLimitAction>exit,message</adlcp:timeLimitAction>
   </item>
</organization>
</organizations>
<resources>
<resource adlcp:scormType="sco" identifier="captivate client and family centred care_ID_SCO_RES" type="webcontent" href="captivate client and family centred care.htm">
   <file href="captivate client and family centred care.swf"></file>
   <file href="captivate client and family centred care.htm"></file>
            <file href="SCORM_support/scorm_support.htm"/>
            <file href="SCORM_support/scorm_support.js"/>
            <file href="SCORM_support/scorm_support.swf"/>
</resource>
</resources>
</manifest>

How to get planned % complete based on number of days

Hello:
I a trying to figure out a way(best way) to determine a "planned % complete" simply based on the number of days in a task.
For example:
Task Start Date = 3/1/15
Task Finish Date = 3/20/15
So the task is 20 days long
Today is 3/10/15 so "planned % complete" should be 50%
(Today-Start) / (Finish-Start)
=
((3/10/15)-(3/1/15)) / ((3/20/15)-(3/1/15))
=
(10) / (20)
=
50%
Do I just enter this into a custom field as a formula or is there a better way of doing this?
Also, when I tried to do this with a formula, it did not apply to the roll up tasks. So, the bolded tasks were blank.
I am trying to get to a calculated number of the % I should be completed based on the current date and length of the task. I realize this might not be the best way so any
suggestions are greatly appreciated.
I would like to be able to look at my project and see that I am 35% complete, but I should be 50%.
Any guidance is greatly appreciated.
I am using MS Project 2010.
Thanks
kp

Hi kp,
You are typically asking for Earned Value indicators. You could of course use the kind of formula you are refering to, but have in mind that MS Project proposes by default a large number of EV fields, such as CPI, SPI and all variance fields. Although it
requires a certain maturity in scheduling (cost, baselines, status date, tracking), it will provide you a large set of EV indicators out of the box.
See an excellent article
here.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Why is the folder strukture based on the import date, and not on the Creation date? How can i setting this?

Why is the folder strukture based on the import date, and not on the Creation date? How can i setting this?

What folder structure?
If you're referring to how Aperture stores the originals in a managed library then the answer is you can't change it.
If having the originals stored in a specific file structure is important to you you will need to switch to a referenced original setup.

Reporting slide views only

Using Captivate 5 and my courses will be published to an SAP LMS and I'd like to give a passing mark when the student has viewed the entire course instead of requiring them to get the quiz questions correct.
Initially, I was making the last forward navigation part of the score, but I am wondering if Slide Views Only will work. If I have 20 slides in my lesson and set that to 20, can that be used to impart a complete or pass mark?

Hello Darren,
I'm using another LMS, so not sure that this works for all! And moreover, I'm not sure that a slide is considered as viewed if its total timeline has not played. That happens often in a CP-file, just an example: if you insert a button, with as Success action 'Go to Next Slide', the part of the timeline after the pausing point will not be played, thus the slide will not be considered as totally viewed.
Is this a linear course or do you allow to go Back? I have proposed a solution somewhere in a thread, by creating a user variable as a counter, that will be incremented whenever a slide is visited for the first time (on Enter event, because that will always be executed, which is not the case for On Exit). And activate a button on the last slide with a score that will be only made visible when the counter has reached the total amount of slides. If this score is set as passing score, this should work with any SCORM-compliant LMS.
Lilybiri

How can i get my items to stay in place and not cross over each other when readjusting the browser s

How can i get my items to stay in place and not cross over each other when readjusting the browser size.
Basically on my site when i go from a small screen to a big screen everything doesn't adjust to the screen size. I don't know what im missing
Here's the link to the page all the pages & they all do it
http://theatricalworkslive.com/
Thanks in advance

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

How to get anonymous guest link "View Only" and "Edit" URL using JSOM or Search API ?

Hi,
I need to get list item anonymous guest link View Only and
Edit URLs (as shown in image below) using JSOM or SharePoint 2013
Search API.
the URL will be like this - https://<site URL>/_layouts/15/guestaccess.aspx?guestaccesstoken=yRaYGmE9n
Any one has any idea how to do achieve this?
Thanks
Shakir

Hi Shakir,
To get the anonymous guest link “View Only”, we can use SP.ObjectSharingInformation.anonymousViewLink property in sp.js.
https://msdn.microsoft.com/en-us/library/office/jj246826.aspx
To get the anonymous guest link “Edit”, we can use SP.ObjectSharingInformation.anonymousEditLink property in sp.js.
https://msdn.microsoft.com/en-us/library/office/jj246468.aspx
We can also use REST API to get the guests links:
_api/web/Lists/getbytitle('library name')/items(item id)/GetObjectSharingInformation?$expand=SharedWithUsersCollection&retrieveAnonymousLinks=true
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to get my images always order by file name, and not by time of captur, in all the folders in the library?

How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
Sorry for the poor english, but im portugues.
In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
It ´s possible?
And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in the other direction?

The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

How do I save my itunes libabry on my computer and not on an exteernal hard drive, how do I save my itunes libabry on my computer and not on an exteernal hard drive

how do I save my itunes libabry on my computer and not on an exteernal hard drive, how do I save my itunes libabry on my computer and not on an exteernal hard drive

It is on the internal boot drive by default.
How/why did you change it?
It is on the internal boot drive by default.
How/why did you change it?

Every time I try to download a free or paid app or in iTunes it asks me for a credit card. (Which i don't have one) How can i download free apps without a credit card and not reset my apple ID? I already put in 20$!!!!!

Every time I try to download a free or paid app or in iTunes
it asks me for a credit card. (Which i don't have one)
How can i download free apps without a credit card and not reset my apple ID?
I already put in 20$!!!!!

How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
If None is not available - On your computer launch iTunes and click "iTunes Store" in the left navigation pane. Click the "down arrow" next to your name at the top right side of the page and click "Account." Enter your username and password and click "View Account" to log into your account information. Next to your Payment Type, click "Edit." Select the "None" button and click "Done." Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
 Cheers, Tom

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

How do I send an email with a group address and not show the addresses/names of the recipients?

How do I send an email with a group address and not show the addresses/names of the recipients?

Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.

How do i finish a download that was already started and not finished because the library closed befo

how do i finish a download that was already started and not finished because the library closed before it done

What are you trying to download and how were you downloading it?

How do I mark complete based on slide views only and not report a score

Similar Messages

Maybe you are looking for