Configuring Actions for GenericAbapConnector Items

Hi all,
we hav created an UWL configuration for use GenericAbapConnector. These items are successfully provided into the UWL, but I' still not able to configure any action for this items.
My Item configuration looks like following:
<ItemType name="uwl.task.reminder.ceac_reminder"
              connector="GenericAbapConnector"
              defaultView="CEACView"
              defaultAction="DisplayReminderView">
      <ItemTypeCriteria systemId="SAP_CRM" externalType="ceac_reminder" connector="GenericAbapConnector"></ItemTypeCriteria>
      <CustomAttributes>
        <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="session">
          <Attribute name="StatusText" type="string" displayName="Status"></Attribute>
          <Attribute name="Value" type="string" displayName="Value"></Attribute>
          <Attribute name="subject" type="string" displayName="subject"></Attribute>
          <Attribute name="AUDIT_GUID" type="string" displayName="AuditGuid"></Attribute>
        </CustomAttributeSource>
      </CustomAttributes>
      <Actions>
          <Action name="launchBSP"
                  referenceBundle="com.kpmg.ceac.DisplayReminderView"
               handler="SAPBSPLauncher" returnToDetailViewAllowed="yes"
               launchInNewWindow="yes" launchNewWindowFeatures="toolbar=no,menubar=no">
         <Properties>
             <Property name="Application" value="crm_bsp_frame"></Property>
             <Property name="Namespace" value="sap"></Property>
             <Property name="PageId" value="entrypoint.do"></Property>
             <Property name="appl" value="/kpmgde/ceac_audit"></Property>
             <Property name="crm_object_id" value="${item.AUDIT_GUID}"></Property>
         </Properties>
         </Action>
         <Action name="DisplayReminderView" referenceBundle="com.kpmg.ceac.DisplayReminderView"
                handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="toolbar=no,menubar=no">
            <Properties>
              <Property name="WebDynproApplication" value="wd_ceac_reinder"></Property>
               <Property name="WebDynproNamespace" value="kpmgde"></Property>
                <Property name="REMINDERID=" value="${item.externalId}"></Property>
     </Properties>
         </Action>
      </Actions>
Any Ideas ? clicking on such item just opens the detail View but no actions are available.
Thanks for any help,
Regards
André

Hi André
As your configuration looks correct buttons "launchBSP" and "DisplayReminderView" should be displayed in the preview area. If you are running NW 7.10 and above the actions will not be displayed as buttons but included in context menu. After fix described in note 1537122 the access to context menu entries is changed to right click on the menu item.
Best regards,
Valeri

Similar Messages

How to set command action for each item in the popupmenuimage

Hi all,
In my canvas application,i used images for popupmenu.Now i have to set command action for each item in that popupmenuimage.I dont know whether it is possible in canvas or not.Can anyone tell me the solution for this .
Thanks,
sourab

Buttons is typical of a c/s application, or, in case of Web Forms, a Java applet. Instead of buttons, you have to use hyperlinks.
See:
http://otn.oracle.com/products/reports/htdocs/faq/faq_migration.htm#346
The hyperlink wil have to be to a URL that does the insert in the table. This can be a mod_plsql procedure, for instance.

Hi all anybody can contribute on how to configure Freegood for 3 items

HI all,
Can anybody share how to configure 1 free good for 3 items.Ex: When we purchase A,B&C items system should give D as a free good.
Thanks in advance,
Ram

hi
there are constraints for free godds scenario
1> Free goods are currently not supported with material structures like product selection, BOM, variants with Bom selection.
2>only supported on a 1:1 basis
3>only supported with sales orders with document category "c" not for quotation etc
4>are not currently supported for deliveries without reference to sales orders
5>are not supported for make to order production, third party scenario,and scheduling agreements
regards

Ability to modify Account Assignment Category for Service Item Categories

Dear experts,
Our customer has a requirement to modify the account assignment category when the item category is set to "D" services on a PR and PO line item. This scenario is specific to indirect procurement scenarios in SAP ECC 6.0 MM.
End users may potentially create a PR against a service item category with an incorrect account assignment category. These PRs are created using free form text. No service master exists in these scenarios. During the approval process or during PO creation, an approver or the buyer may need to correct the account assignment category. The account assignment category is "display" only and cannot be modified when the item category is set to "D". The user must delete the line item and create a new line item with the correct account assignment category. The copy function cannot be used because the account assignment copies from the existing line and cannot be modified.
Any recommendations to this issue using standard SAP configuration solutions?
Thanks,
Jennifer

Item Category to Account Assignment Category combination is already configured. For Service Item Category, we have three account assignment categories configured. All three categories are valid in different scenarios. Sometimes the user selects the incorrect account assignment category (out of the three available) depending on the business scenario. PT9F configuration is already set to Account Assignment category "optional". However, the account assignment category still cannot be modified on the PR when the item category is "D" service.
Any other recommendations?

Actions for Fax

Hi Gurus
How to maintain Actions for Fax
Please guide how to configure Actions for Fax and what are the Parameters I have to maintain
How to do campaign with using communication channel as Fax what are the Configurations we require for this campaign
So please guide me
Thanks in Advance
Rai

Hello,
Please check the output format for SAPScript/Smartforms. Please change
this to PS (Postscript).
This can be done in SCOT -> Node "FAX100" -> Button Fax "Set" -> SAPScript/Smartforms.
There is one more thing I would like to check
- go to SPRO: CRM -> Basic Functions -> Actions -> Actions in Transaction -> Change Actions and conditions -> Define Conditions
Thanks & Regards
Raja
CRM Marketing forum Moderator

This action is not valid for this item

Hi all,
I am facing with "This action is not valid for this item" error, if I submit the items by using "Submit Decisions" button on UWL. Please find the uwl, below;
    <ItemType name="uwl.task.webflow.decision.TS90100027" connector="WebFlowConnector" defaultView="DevamDevamsizlik" defaultAction="viewDetail" executionMode="pessimistic">
      <ItemTypeCriteria externalType="TS90100027" connector="WebFlowConnector"/>
      <CustomAttributes>
        <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="session">
          <Attribute name="Personel" type="string" displayName="Personel Adı"/>
          <Attribute name="AttAbsText" type="string" displayName="Devam/Devamsızlık Tipi"/>
          <Attribute name="BaslangicTarihi" type="date" displayName="Başlangıç Tarihi"/>
          <Attribute name="BaslangicSaati" type="time" displayName="Başlangıç Saati"/>
          <Attribute name="BitisSaati" type="time" displayName="Bitiş Saati"/>
          <Attribute name="BitisTarihi" type="date" displayName="Bitiş Tarihi"/>
        </CustomAttributeSource>
      </CustomAttributes>
      <Actions>
        <Action name="Onayla" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="decisionKey" value="0001"/>
            <Property name="UserDecisionTitle" value="Onayla"/>
          </Properties>
          <Descriptions default="Onayla"/>
        </Action>
        <Action name="Reddet" groupAction="" handler="SAPBSPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="decisionKey" value="0002"/>
            <Property name="UserDecisionTitle" value="Reddet"/>
            <Property name="Application" value="zh12j010"/>
            <Property name="PageId" value="rejectreason.htm"/>
            <Property name="workitemId" value="${item.externalId}"/>
          </Properties>
          <Descriptions default="Reddet"/>
        </Action>
        <Action name="Detay" groupAction="" handler="SAPBSPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="Application" value="zh12j010"/>
            <Property name="PageId" value="detail.htm"/>
          </Properties>
          <Descriptions default="Detay"/>
        </Action>
        <Action name="Yazdir" groupAction="" handler="SAPBSPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="Application" value="zh12j010"/>
            <Property name="PageId" value="print.htm"/>
          </Properties>
          <Descriptions default="Yazdır"/>
        </Action>
        <Action name="submitUserDecisions" groupAction="yes" handler="UIActionHandler" referenceBundle="submit" returnToDetailViewAllowed="no" launchInNewWindow="no"/>
      </Actions>
    </ItemType>
    <View name="DevamDevamsizlik" selectionMode="MULTISELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.TS90100027" columnOrder="createdDate, Personel, AttAbsText, BaslangicTarihi, BitisTarihi, BaslangicSaati, BitisSaati, redCol, onayCol" sortby="createdDate" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" refresh="-1" dueDateSevere="0" dueDateWarning="0" emphasizedItems="new" displayOnlyDefinedAttributes="no" dynamicCreationAllowed="yes" actionPosition="bottom">
      <Descriptions default="Devam/Devamsızlık Talepleri">
        <ShortDescriptions>
          <Description Language="en" Description="Devam/Devamsızlık Talebi Onay"/>
        </ShortDescriptions>
      </Descriptions>
      <DisplayAttributes>
        <DisplayAttribute name="onayCol" type="checkbox" width="" sortable="no" format="default" actionRef="0001" hAlign="CENTER" vAlign="TOP" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Onayla">
            <ShortDescriptions>
              <Description Language="en" Description="Onayla"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="Personel" type="string" width="30" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Personel"/>
        </DisplayAttribute>
        <DisplayAttribute name="AttAbsText" type="string" width="15" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Devam/Devamsızlık Tipi"/>
        </DisplayAttribute>
        <DisplayAttribute name="BaslangicTarihi" type="date" width="" sortable="yes" format="medium" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Başlangıç Tarihi"/>
        </DisplayAttribute>
        <DisplayAttribute name="BaslangicSaati" type="time" width="" sortable="no" format="medium" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Başlangıç Saati"/>
        </DisplayAttribute>
        <DisplayAttribute name="redCol" type="link" width="20" sortable="no" format="default" actionRef="Reddet" hAlign="CENTER" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Reddet">
            <ShortDescriptions>
              <Description Language="en" Description="Reddet"/>
            </ShortDescriptions>
          </Descriptions>
        </DisplayAttribute>
        <DisplayAttribute name="BitisSaati" type="time" width="" sortable="no" format="medium" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Bitiş Saati"/>
        </DisplayAttribute>
        <DisplayAttribute name="BitisTarihi" type="date" width="" sortable="yes" format="medium" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
          <Descriptions default="Bitiş Tarihi"/>
        </DisplayAttribute>
      </DisplayAttributes>
      <Actions>
        <Action reference="submitUserDecisions"/>
        <Action reference="refresh"/>
        <Action reference="forward"/>
      </Actions>
    </View>
Can anyone give a suggestion about it?
Thank you

Hi all,
I had the exact same error using a user decision configuration. Issue was that I was using a VIEW that did not exist:
ItemType name="uwl.task.webflow.TS90300005" connector="WebFlowConnector" defaultView="DefaultApprovalView">
DefaultApprovalView was not defined as a custom view.
SOLUTION: changed it to standard SAP com.sap.pct.erp.srvconfig.approvaloverview view and it worked!
ItemType name="uwl.task.webflow.TS90300005" connector="WebFlowConnector" defaultView="com.sap.pct.erp.srvconfig.approvaloverview">
This is normally by default defined in a standard portal system.
Edited by: David Pierre on Jan 13, 2010 3:15 PM
Edited by: David Pierre on Jan 13, 2010 3:16 PM
Edited by: David Pierre on Jan 13, 2010 3:19 PM

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

OAAM 11g R2: Unable to load java class for custom configurable action

Need to configure a Configurable Action to get triggered for a particular action at a given checkpoint.
Steps Followed:
1. Created a java class implementing com.bharosa.vcrypt.tracker.dynamicactions.intf.DynamicAction, getParameters() and execute() methods were implemented in that java class.
2. Added necessary jars from $ORACLE_IDM_HOME\oaam\cli\lib to the build classpath.
3. Compiled and created a jar with it.
4. Extracted the oracle.oaam.extensions.war file into a working folder.
5. Added the Custom Jar created in step 3 into <working folder>/WEB-INF/lib/
6. Changed the following in MANIFEST.MF in <working folder>/META-INF/:
Specification-Version:11.1.2.0.1
Implementation-Version:11.1.2.0.1
7. Rejar-ed the oracle.oaam.extensions.war from the working folder using following command:
jar -cvfm oracle.oaam.extensions.war <working folder>\META-INF\MANIFEST.MF -C <working folder>/ .
8. Stopped the oaam_admin_server1, oaam_offline_server1 and oaam_server_server1.
9. Deleted the oracle.oaam.extensions deployment from the weblogic.
10. Deployed the newly created oracle.oaam.extensions as a shared library for oaam_admin_server1 and oaam_server_server1.
11. Started all managed servers.
But when I tried to create an action template with the java class I just created, it was throwing following error
+java.lang.ClassNotFoundException: *+
Unable to load configurable action class *. Ensure the class is made available in the class path.
Referred following documents:
1.      http://docs.oracle.com/cd/E27559_01/admin.1112/e27207/cfgactions.htm
2.     http://docs.oracle.com/cd/E27559_01/dev.1112/e27206/cfg-action.htm
3.     http://docs.oracle.com/cd/E27559_01/dev.1112/e27206/extend.htm
Kindly help me. Thanks in advance.
Edited by: 917717 on Dec 12, 2012 7:16 PM

This thread is a bit stale but I thought it might help to clarify one point about custom jar files on UCCX.
To properly load a custom jar:
Upload it into the classpath directory in the document repository.
Select it under System | Custom Classes Configuration
Finally you need to restart the CCX Engine and the CCX Administration services. If you have HA you need to restart them on both servers.
Other notes:
When referencing your class in the CCX Editor, use the fully qualified name of the class. Lots of other classes use things like Element or Document so you need to be explicit. The editor only knows about the 20 native classes by their object names. If you create a Document object in the editor you are really creating a com.cisco.doc.Document object. If you loaded jdom.jar and you wanted a jdom document then you need to create an object of type org.jdom.Document.
When compiling your custom jar files, be sure to compile for the version of Java that the CCX Engine runs. In general UCCX 7.X and older use Java 1.4. UCCX 8.X and higher use Java 1.6. Several of the core Java classes had significant changes between 1.4 and 1.6. If you ran your code on UCCX 7 or earlier and now it fails in UCCX 8.X or higher, recomplile for Java 1.6 and you classes will likely work again.
Finally, check for security violations in UCCX 8.X or higher. Cisco has restricted some of the things you can do. These URL's have more information:
http://docwiki.cisco.com/wiki/Engine
http://docwiki.cisco.com/wiki/Troubleshooting_Tips_for_Unified_CCX_8.0
-Steven
Please help us make the communities better. Rate helpful posts!

"Ask for Finder Items" Automator action broken?

OK, I'm pulling my hair out on Automator (again). I'm on OS X Lion 10.7.1.
Here's what I want to do: I have image files named "something-something (S1).png" and I want to create a copy of each file named "something-something (S2).png" then resize that copy to 50% the size of the original. A perfect choice for Automator, I would have thought.
So here's the workflow I came up with:
1. Ask for Finder Items: Type set to Files and Allow Multiple Selection checked.
2. Duplicate Finder Items: To create a copy, hopefully named "something-something (S1) copy.png".
3. Rename Finder Items: Set to Replace Text, with Find set to "(S1) copy" and Replace set to "(S2)" (in basename only).
4. Scale Images: Set to By Percentage 50.
I would have thought that would have worked. Trouble is, it doesnt even get to first base. When I run the workflow I see the expected choose file dialog, and I choose a test PNG file. Then Automator happily announces that "Ask for Finder Items completed" in the log, and proceeds to sit .. and sit ... and sit. It says it's running, but nothing is happening. No duplicate file action happens, no rename .. nothing. Oh, and yes, I do see the selected filename in the "Results" area for the Ask for Finder Items action.
What's going on? Any ideas? For a supposedly intuitive tool I find automator inscrutable (and I'm a 30 year seasoned operating system oftware developer).
TIA,
--Tim

FWIW, if you've found a bug, please contact Apple Support folks or (if you have access) use the BugReport tool.
(This is a user forum, and the Apple Engineering folks may or may not see any reports that are posted here.)

How to set "Configuration Variant" for a sales order item using function

Hello All,
I use function module 'SD_SALES_DOCU_MAINTAIN' to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
Is their any idea or sample code?

Hi Zhijun zhang,
<u>http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm</u>
<u>http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm</u>
A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
The first link will guide you by screen shot wise.
Award points if it adds information.
Thanks
Mohan

Configuration guide for Action Control Matrix

Hi, Does anyone configuration guide for action control and status matrix for VMS for Equipment master, General Object creation, Master warranty creation and assignement for the object VELO.

I have seen this as well as the SAP best practices configuration guide, they do not talk about the status for CREQ. We have defined it as secondary action and executed the action but it does not create the equiment. The CS/Plant maintenance does not seem to recognise objects created from VELO. Although the documentation talks of VELO as equipment categry along with the standard equipement category EQ, we are not sure if we have to add VELO as equipment category (add how to add as well) so that the vehicle master details can be carried from VELO into equipment for warranty processing.
Thanks

VMM 2012: How to Configure Automatic Start and Stop Actions for a Virtual Machine?

Does somebody know how to confgure Automatic Start and Stop Actions for a Virtual Machine in VMM 2012?
I miss that option.

Automatic Start or Automatic Restart actions are available for virtual machines running on a Hyper-V cluster from within Virtual Machine Manager.
From within Virtual Machine Manager, bring up the Virtual Machine's properties:
Click "Hardware Configuration"
Click "Availability"
Click "High", "Medium", or "Low" to enable automatic start/restart or
Click "Do not restart automatically" to disable automatic start/restart
Screenshot from VMM 2012 for a VM running in a Server 2012 R2 Hyper-V cluster:
VMs running on a cluster have to be marked "Highly Available" and logically, Microsoft assumes that you'll want these VMs to be running all the time when this setting is selected. If the cluster fails or needs to be restarted, you can set the priority
by which a VM restarts, or you can set the VM to not restart at all when cluster services are restored by using the settings above.

"Run Workflow" action in Automator does not "Ask for Finder Items"

So I have a workflow called step_1 that does a bunch of stuff . . . in essence, it "Asks for a Finder Item" and then runs some Python shells and then outputs an Applescript format list {'item_1','item_2','item_3'}
I'm trying to use this workflow in another workflow so I selected "Run Workflow" in Automator and located my original workflow step_1 but when I run it, the process goes straight through the workflow and doesn't "Ask for Finder Items" so i'm sure it doesn't do anything else in the workflow either. It doesn't give me an error, it just pretty much bypasses everything within the workflow and it's pretty annoying.
Any idea on how to get my workflow to work using "Run Workflow" ?

Never tired Run Workflow before so as as a test I rn these two
and the Ask for Finder items in the called workflow ran OK.
Note this was run from Automator. One thing I did see was that the Ask for finder items window did not come to the front and I had to look under my open windows to see it.

UWL action for SAPWebDynproLauncher gives NullPointerException

Hello,
I have create a action for call a WebDynpro Application. But it gives a exception. The error comes before my WD Application was calling.
java.lang.NullPointerException
    at com.sap.netweaver.bc.uwl.ui.control.UWLActionControl.handleActionFromTable(UWLActionControl.java:642)
    at com.sap.netweaver.bc.uwl.ui.UWLMainView.onActionUWLActions(UWLMainView.java:607)
    at com.sap.netweaver.bc.uwl.ui.wdp.InternalUWLMainView.wdInvokeEventHandler(InternalUWLMainView.java:469)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    ... 27 more
I use the transaction SWFVISU. I have re-registered the System and the item. I customized my own view in configuration file with <DisplayAttribute name="detailIcon" actionRef="launchWebDynPro"/> . With sap standard action i have no problem but with my own.
Can anybody help me.
best regards
karsten

Karsten,
Can you post two things to help us resolve your problem:
1. The section of the UWL XML file which configures launching the Web Dynpro
2. The URL of the Web Dynpro application when you launch it in "preview" mode
Here's a sample which worked for me on a previous project:
<ItemTypes>
    <ItemType name="uwl.task.webflow.TS90000001" connector="WebFlowConnector" defaultView="ESCRView" defaultAction="launchWebDynPro" executionMode="pessimistic">
      <ItemTypeCriteria externalType="TS90000001" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="WebDynproApplication" value="UWLChoiceList"/>
            <Property name="WebDynproDeployableObject" value="local/ESCR01"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default="Launch Choice List">
          </Descriptions>
        </Action>
      </Actions>
      <Menu>
        <MenuItem name="launchWebDynPro" actionRef="launchWebDynPro"/>
      </Menu>
    </ItemType>
Regards,
Darren

Fixed quantity not supported for alternative items

Hi dears,
I was trying to configure in a Bill of Material a group of components marked together as "Alternative item", having the Fixed quantity indicator set (so the quantity is not in proportioned with the order quantity).
However, when I do this action I have the error message no. 29485 "Fixed quantity not supported for alternative items", because a fixed quantity is not allowed for alternative items.
Leaving out the fact that I don't understand for which kind of logic this should be done, do you know if there is any solution to achive the same result (use alternative item and each of them should be with fixed quantity despite th eorder quantity)?
Thanks and regards,
Giovanni

Daily structure relationship step: remove relation
CLOSING

Configuring Actions for GenericAbapConnector Items

Similar Messages

Maybe you are looking for