Configuring Automatic Updates using Powershell for Server 2012: wsuaserv service invalid

This server is configured as a core server (no gui).
In the following article, to enable automatic updates, one method is to configure the wsuaserv service:
http://technet.microsoft.com/en-us/library/jj574100.aspx
Doing the first step, I get the following:
c:\windows>net stop wsuaserv
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
Why do I get this and how can I fix it?
Thanks
-- aeoril
Scott Sanbar, Chief Engineer, Sanbar Computing http://www.sanbarcomputing.com

Uh, he meant the command at the bottom on the referenced web page, not the net helpmsg.
If you look at the original post, the name of the service IS incorrect, just as you specified it incorrectly. The service name is 'wuauserv'. So it is not Microsoft has renamed the service; you have tried to rename the service. <wink>
. : | : . : | : . tim

Similar Messages

WSUS and GPO - Configure Automatic Updates

if Configure Automatic Updates is disabled for all of my domain, can I still use WSUS to update my clients?

Hi,
In brief, no.
If we change Configure Automatic Updates to Disabled, any client updates that are available from the public Windows Update service must be manually downloaded from the Internet and installed.
For detailed information, please refer to the link below,
http://technet.microsoft.com/en-us/library/dn595129.aspx#BKMK_Comp5
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Group Policy Configure Automatic Updates to DISABLED

Single Primary Site running SCCM 2012 R2. SUP configured using port 8530/8531.
Group Policy Configure Automatic Updates to DISABLED. is in place.
Do we need to disable the group policy for SCCM to deploy updates?
if it stays then how do we distribute an updated WUA using software distribution in ConfigMgr?
http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/

It used to be possible by using the links provided in the cab file mentioned in this article:
http://msdn.microsoft.com/en-us/library/windows/desktop/aa387285(v=vs.85).aspx
I have to admit that I did not do that recently..
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Error During install Exchange 2013 through Powershell on Server 2012 "Mailbox role: Client Access service"

Dear all
During install Exchange 2013 through Powershell on Server 2012 I got this error in Mailbox role: Client Access service :
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "An error occurred while creating the IIS virtual directory 'IIS://MONAMBX2.mona.local/W3SVC/2/ROOT/o
wa' on 'MONAMBX2'.".
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "The operation couldn't be performed because object 'MONAMBX2\OWA (Exchange Back End)' couldn't be fo
und on 'MonaDc1.mona.local'.".
Any advice please !!

I can't answer your question but I had a similar issue when I was trying to move our mailbox database off the C: drive. Our environment still has an Exchange 2007 server in it and when I was trying to move the database on the 2013 server, I would get
error messages saying the database does not exist. It seemed like it was trying to move the database on the 2007 server from the similar error messages that I was getting. To get around it, I deleted the database and created a new one on the drive
where we wanted it.
I discovered this when I was configuring the Antispam settings. I deleted our 2007 settings, added them to the 2013 shell, the settings appeared on our 2007 server. The shell on 2013 was making changes to 2007.
I'm not sure if there is a "Get|Set or New" command that I/we should be using when this happens. Or maybe my issues will be fixed if I just remove the Exchange 2007 server? I'm not ready to do that yet because I can't configure the spam filtering
on 2013 yet with its shell not being able to make the changes that we need.
I don't know if your environment is in coexistence mode like mine.
Hopefully someone else out there has an answer or can tell us when/how the shell can make the appropriate changes to the 2013 server. Does this happen after the 2007 server is removed?

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005 Description: "Internal error: An une

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005
Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
I'm using OLE DB provider for connecting to cube.
I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???

You are probably missing an update.
I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
Arthur My Blog

SAP NetWeaver BI with Microsoft SQL Server 2012 Reporting Services using XMLA

I am currently implementing SAP BW and am trying to connect the Microsoft SQL Server 2012 Reporting Services product. I am able to connect to SAP BW but there is one problem when i click on Query Designer after adding a DataSet the screen just displays the dialog prompt saying '' NO CUBES WERE FOUND. VERIFY THAT YOU HAVE SELECTED A VALID CATALOG''.
The advanced information depicts the following:

Hi Raunak T,
Just a very basic question from my end:
I believe that "Microsoft SQL server Report Builder" is the 3rd party which uses MDX as interface.
Have you set the property using OLE DB for OLAP in your queries?
BR
Prabhith

Microsoft OLE DB Provider for SQL Server 2012 Analysis Services Error Code = 0x80040E05

I've been running a package for 6 months without any issues that pulls data from a cube via MDX and moves it to a database.
We've recently moved to a new server x64 and the connections all succeed but at runtime (in 64 = T&F) I get the following error:
[SRC AdExchange [87]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
[SSIS.Pipeline] Error: SRC AdExchange failed the pre-execute phase and returned error code 0xC0202009.
I've installed SQL_AS_OLEDB, SQL_AS_ADOMD from Microsoft® SQL Server® 2012 SP1 Feature Pack
Why is my connection failing?

The server has a 10Gbps network connection.
I've installed CU6 for SQL Server 2012 SP1
http://support.microsoft.com/kb/2874879/en-us#hfi
I'm still getting the same error at runtime in BIDS:
[SRC AdExchange [87]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
[SSIS.Pipeline] Error: SRC AdExchange failed the pre-execute phase and returned error code 0xC0202009.
Looking at the errorlog, everything looks normal until:
Launched startup procedure 'sp_ssis_startup'.
Attempting to load library 'xpsqlbot.dll' into memory. This is an informational message only. No user action is required.
Using 'xpsqlbot.dll' version '2011.110.2100' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Using 'xplog70.dll' version '2011.110.2100' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
AppDomain 2 (SSISDB.dbo[runtime].1) created.
Unsafe assembly 'microsoft.sqlserver.integrationservices.server, version=11.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil' loaded into appdomain 2 (SSISDB.dbo[runtime].1).
Unsafe assembly 'microsoft.sqlserver.integrationservices.server, version=11.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil' loaded into appdomain 2 (SSISDB.dbo[runtime].1).
AppDomain 3 (master.sys[runtime].2) created.
Software Usage Metrics is enabled.
SQL Server is terminating because of a system shutdown. This is an informational message only. No user action is required.
Service Broker manager has shut down.
Error: 17054, Severity: 16, State: 1.
The current event was not reported to the Windows Events log. Operating system error = (null). You may need to clear the Windows Events log if it is full.
.NET Framework runtime has been stopped.
SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ MSSQLSvc/XXXXXXXXXX.com ] for the SQL Server service. Error: 0xffffffff, state: 63. Administrator should deregister this SPN manually to avoid client authentication
errors.
The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ MSSQLSvc/XXXXXXXXXX.com:1433 ] for the SQL Server service. Error: 0xffffffff, state: 63. Administrator should deregister this SPN manually to avoid client authentication
errors.
Wondering about the unsafe assembly in SSIS and deregistering the SPN..
Anyone have any ideas on how to resolve this?
Thanks!

How to create sharepoint Group with read only permissions using powershell for entire site ?

How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)

Hi
using (SPSite site = new SPSite(url))
using (SPWeb web = site.OpenWeb())
SPUserCollection users = Web.AllUsers;
SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
SPGroupCollection groups = Web.SiteGroups;
string GroupName = “Super Exclusive”;//your group name
string GroupDescription = “Super exclusive group description.”;
groups.Add(GroupName, owner, member, GroupDescription);
SPGroup NewSPGroup = groups[GroupName];
SPRoleDefinition role = Web.RoleDefinitions["Read"];
SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
roleAssignment.RoleDefinitionBindings.Add(role);
Web.RoleAssignments.Add(roleAssignment);
Web.Update();
Please 'propose
as answer' if it helped you, also 'vote
helpful' if you like this reply.

HP Officejet Pro 6830 Scanner drivers for Server 2012

Printer: HP Officejet Pro 6830 e-All-in-One Printer
Serial Number: [edited Serial Number by Moderator]
Product Number: E3E02A
Email Address: [edited email by moderator]
Operating System: Windows Server 2012
I have an issue when trying to install the printer and scanner driver on Server 2012. The driver on the website for Server 2012 is 32Bit link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4138&lc=en&cc=za&dlc=en&sw_lang=&product=5390...
And the drivers that came with the printer give the following error: "This computer does not meet the following system requirement(s): The Operating System of this computer is not supported."
Have phoned HP on the support line all they do is give me a different phone number to phone.
Please someone help.

Hi @Mark-active
Although my area of expertise is with consumer products and software, not commerical products such as servers, I do have something that might be helpful; Setting Up the Printer on Windows Server 2003, 2008, or 2012 for HP Officejet Printers.
If the issue you are experiencing persists, I suggest giving us a call. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to configure automatic printing of picklist for an OBD?

Hi Experts,
Can you pleae let me know how to configure automatic printing of picklist for an OBD?
Thanks,
Shetty

1. To see whether picking list (EK00) is generated:
VL02n open the delivery -> menu bar -> extrax -> picking output .
Is EK00 there? If not, it means that EK00 is not generated for this delivery.
If EK00 is green -> it means that it has been printed.
If it's yellow -> it means that it hasn't been printed yet. Now you have to goto VL70 to print it.
2. To generate a picking output for one delivery, you have to do:
[1] In customizing of shipping point, (img -> enterprise structure -> defination -> logistics execution ->shipping point), you have to set picking output (TVST-KSCHL).
[2] Item is relevant for picking, and plant/storage location is not assigned to a warehouse.
[3] Set default print parameter in customizing. (IMG -> Logistics Execution -> Shipping -> basic function -> output control ->define print parameter -> V4 -> for you picking output type -> assign default print parameter to shipping point ).
Edited by: Harry Wu on Jul 23, 2010 3:07 AM

Coldfusion support for Server 2012

When are installers going to be made avaliable for Server 2012 for Cold Fusion?.
Adobe have offically said that installers for windows 8 are 3-5 months away as of September 22nd, 2012 but we havent heard anything about Server 2012?
Server 2012 was released to MSDN on the 4th of Sepetember. 4 Months seems a long time to wait with no word on installers or support for CF on Server 2012. Are you telling me Adobe doesnt have a MSDN account and only got access to Server 2012 at the same time as the generaly public?

Unfortunately we are all paying the price for Oracle deferring the end of life of Java 6 from November to Feb. It sounded like Adobe were going roll all this stuff into their patch to add Java 7 support to CF9 and CF10, which they would have needed to get done by Nov. However now it seems they've slacked off and have left it to the last minute. I guess the good news is that this should all be done within the next month or so. The bad news is... it won't give us much chance to test the new release between when Adobe patch CF and before the Java 6 EOL.
Adam

MS Security Essentials for Server 2012 R2

I've had MS Security Essentials installed on my Server 2008 R2 Foundation, but now that I've upgraded to 2012 R2 Foundation, MS Security Essentials won't install. It gives an error message saying that it won't run on this computer.
I've searched for a replacement, but my searches yield ONLY results for Server 2012 R2 Essentials, and NOT Security Essentials. Is there a replacement for MS Security Essentials, and if so, how/where can I find it???
Capt. Dinosaur

Hi,
I agree with Ed that Microsoft Security Essentials is designed for client machines.
I have seen forum threads that indicating it is running well on Windows 2008 machines, still, it is not supported.
Here are some references below for you:
Microsoft Security Essentials, but for Windows Server 2008?
https://social.technet.microsoft.com/Forums/windowsserver/en-US/13a80a5d-825d-48b3-9aa8-8a03ae6de249/microsoft-security-essentials-but-for-windows-server-2008
Windows Security Essentials on Windows 2008 R2
https://social.technet.microsoft.com/Forums/windowsserver/en-US/c9290ed2-0423-4822-9db9-490c18c3178e/windows-security-essentials-on-windows-2008-r2?forum=winserversecurity
Best Regards,
Amy

Need free anti virus for Server 2012 Standard Edition.

I am taking online course for Server 2012 Standard and need to find a free anti-malware solution. Can anyone please help me ?
Thank you in advance.
Pedro Rivero

Dear Friend,
See the following link.
http://www.win2012workstation.com/tag/antivirus/
U can also following all are i tested and working fine !!!!
Unthreat Antivirus ( http://www.unthreat.com/ )
Immunet 3.0 ( http://www.immunet.com/main/index.html )
And dont forgot to mark it as answer if you find usefull to you !!!

SQL Server 2012 Reporting services Report Builder ClickOnce in SharePoint integrated mode

Hi
I've installed SSRS 2012 in Integrated Mode with SharePoint 2013.
I've created RS Application, I have the Content types for Report Builder Report but when I try to create a new Report Builder Report from a document library (using ribbon) it try to lauch the following url
http://sp2013/bi/_layouts/15/ReportServer/RSAction.aspx?RSAction=ReportBuilder&FileUrl=http://sp2013/_layouts/15/ReportServer/rs.rsapplication&SaveLocation=http%3A%2F%2Fsp2013%2Fbi%2FDocuments&Source=http%3A%2F%2Fsp2013%2Fbi%2FDocuments%2FForms%2FAllItems%2Easpx
which gives an 404 Not found error
I've installed Report Builder 3.0 as standalone because from SQL installation I didn't get an Report Builder
What else should I do ?
I've noticed that ReportBuilder_3.....application is in webservices folder of sharepoint
Please help
Sorin Sandu

Hi Sorin,
SQL Server 2012 Reporting Services (SSRS) includes stand-alone and ClickOnce versions of Report Builder. The ClickOnce version can be used with Reporting Services installed in native or SharePoint integrated mode. For more information about how to start
Report Builder, please see:
http://msdn.microsoft.com/en-us/library/ms159221(v=sql.110).aspx
Reference:
SharePoint 2010 – SQL 2012 Reporting Services
SharePoint 2010 - SQL 2012 Reporting Services Part 2
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Share Data Source between multiple report projects in Microsoft SQL Server 2012 Reporting Services

I have a reports solution in 2012 which contains multiple report projects one each for target deployment folder and we use TFS 2012 for report deployment.
We have a template project which has a bunch of template reports and all the datasources used in different reports.
When I develop a report, I cannot "Preview" in TFS but, for deploy this used to work fine util the reports solution was in TFS 2010 & Visual Studio 2008 R2. Since we moved to TFS 2012 & SSRS 2012 not being able to deploy till I create all
the necessary datasources for each project and now all the developers complaining that they cannot develop reports in TFS itself as they cannot preview (this problem was existing previously) and now not being able to deploy as it errors for each report "Could
not find specified rds file". I tried messing around with the .rptproj file DataSources tag that did not help either by modifying it like below.
<DataSources>
<ProjectItem>
<Name>DB.rds</Name>
<FullPath>Template\Data Source\DB.rds</FullPath>
</ProjectItem>
</DataSources>
Is there a way I could share a Data Source between multiple projects in Microsoft SQL Server 2012 Reporting Services?
Thanks in advance.............
Ione

Hi ione721,
According to your description, you want to create a shared data source which works for multiple projects. Right?
In Reporting Services, A shared data source is a set of data source connection properties that can be referenced by multiple reports, models, and data-driven subscriptions that run on a Reporting Services report server. It must be within one project.
We can't specify one data source working for multple projects. In this scenario, we suggest you put those reports into one project. Otherwise you can only create one data source for each project.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Configuring Automatic Updates using Powershell for Server 2012: wsuaserv service invalid

Similar Messages

Maybe you are looking for