Configuring EM for database
Hi,
I have upgraded a 9.2.0.5 database to a 10.2.0.1 home. The upgrade was successfull. I also changed the listener port number since there was a default listener running on 1521. The new listener is now a namd listener on a different port. I now want to configure the EM agent so that I could use the web browser to keep track of the database.
I'm using emca as per the instructions given in after upgrading the database. But everything I have tried come back with the help menu displayed and I do not know how to proceed. Any help would be greatly appreciated.
I also tried the emctl but I get the message EM configuration issues: hostname_SID directory does not exist. I checked to see and the directory was never created.
How should I configure the EM?
Thanks,
Mamata
Hi,
emca command has changed its syntax for Release 2 and now a lot options.
emca -config dbcontrol db -repos create is the basic command , it creates some directories, populates configuration files with informations of your machine and the database you want to monitor, at the end it creates the repository owner (SYSMAN) and all necessary objects. If you create (not update) a new 10g database, normally this command is executed as one of the last steps by DBCA (if you chose you want to use dbconsole).
Regards Werner
Similar Messages
-
Hello , I think the below event alert 4113 is very common and is due to that only one database copy is present in DAG but is there any way we can stop this alert for the
specific database.
The message tells that there is only one copy of the database - create another copy and the warning message will go away but
we do not want to create another copy. So is there any way we can stop this event getting generated.
Database redundancy health check failed.
Database copy: DB-1
Redundancy count: 1
Error: The number of configured copies for database 'DB-1' (1) is less than the required redundancy count (2).
Name Status RealCopyQueu InspectorQue ReplayQueue CIState
e
ue
DB-1\ Mounted 0 0 0
Healthy
MAILSRV2
===============
Full Status
===============
Identity : DB-1\MAILSRV2
Name : DB-1\MAILSRV2
DatabaseName : DB-1
Status : Mounted
MailboxServer : MAILSRV2
ActiveDatabaseCopy : MAILSRV2
ActivationSuspended : False
ActionInitiator : Unknown
ErrorMessage :
ErrorEventId :
ExtendedErrorInfo :
SuspendComment :
SinglePageRestore : 0
ContentIndexState : Healthy
ContentIndexErrorMessage :
CopyQueueLength : 0
ReplayQueueLength : 0
LatestAvailableLogTime :
LastCopyNotificationedLogTime :
LastCopiedLogTime :
LastInspectedLogTime :
LastReplayedLogTime :
LastLogGenerated : 0
LastLogCopyNotified : 0
LastLogCopied : 0
LastLogInspected : 0
LastLogReplayed : 0
LogsReplayedSinceInstanceStart : 0
LogsCopiedSinceInstanceStart : 0
LatestFullBackupTime :
LatestIncrementalBackupTime :
LatestDifferentialBackupTime :
LatestCopyBackupTime :
SnapshotBackup :
SnapshotLatestFullBackup :
SnapshotLatestIncrementalBackup :
SnapshotLatestDifferentialBackup :
SnapshotLatestCopyBackup :
LogReplayQueueIncreasing : False
LogCopyQueueIncreasing : False
OutstandingDumpsterRequests : {}
OutgoingConnections :
IncomingLogCopyingNetwork :
SeedingNetwork :
ActiveCopy : True
ThanksThat regex looks odd to me. I assume you have databases with names like "Mailbox Database <ten digit number>" (standard Exchange default name, in other words), "ABC-DB" and "HOME-DB". If this is the case, wouldn't
you want "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"? THis works if I run it from a prompt:
[PS] C:\Scripts>"Mailbox Database 0123456789" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
True
[PS] C:\Scripts>"Mailbox Database 123456789" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
[PS] C:\Scripts>"Mailbox Database 12345678910" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
[PS] C:\Scripts>"HOME-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
True
[PS] C:\Scripts>"ABC-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
True
[PS] C:\Scripts>"ABCD-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
[PS] C:\Scripts>"HOM-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
I find it's easiest to test RegEx's from the prompt this way. If the above isn't your goal, let us know, and we'll see if we can come up with something better. -
Hardware configuration recommendations for database and VM work
I'm looking for advice on system configuration for a computer to use at work for database, VM, and number-crunching applications. The database work will involve complex SQL queries against MySQL databases in the 5–50 GB range. I'll be using the computer for a variety of projects, and I'd like to configure and run Linux VMs on a per-project basis. The number-crunching will involve engineering applications, most of which will likely run in Linux. The database tables might be accessed from OS X or a Linux VM; I'm not sure at this point.
Advice or recommended reading on internal RAID, SAS, Fibre Channel, and the like would be appreciated. Would it make sense to have a large SATA boot drive that stores the VM and a second high-throughput drive array for the database tables? If so, what are some good options for configuring the latter? Staying in the $5k–$7k range would be nice.
Thanks,
AndreasFileMaker is the best option if you want a good GUI front end. It's not free like MySQL but the price is worth it.
-
Howto configure Timeout for database link
Hi,
how can I configure the expected timeout for a db link connection?
My problem is, that I've to get data from a far distance database and the network connection is not very good.
Sometimes it works pretty good, but often I get a not reachable error. Monitoring the server with ping shows, that the server is always alive, but the roundtrip time is high ( >200 ms).
System: Oracle 9.2.0.5
Linux (RedHat)
Thanks for help
StephanWell since db links just use the underlying SQL*Net configuration, what you're actually looking for is timeout settings for SQL*Net, there are two:
In the listener.ora file on the server:
INBOUND_CONNECT_TIMEOUT_<listener_name> = n seconds
Determines the limit the database listener will wait for a client connection to complete after the connection is made.
In the sqlnet.ora file on the server:
SQLNET.EXPIRE_TIME = n minutes
Determines the limit for the frequency of active connection verification of a client connection.
If the problem is you're getting disconnected because of network timeouts, it could be here or something in your LAN network settings. -
Configuring emails for database backup
I have the query as to where to configure the emails for backup completion in Oracle 11g. The detailed steps would help.
I hope my question is clear as to how to configure the email notification for backup completion in Oracle 11g.
Please revert with the reply to my query.
Regards972145 wrote:
I have the query as to where to configure the emails for backup completion in Oracle 11g. The detailed steps would help.
I hope my question is clear as to how to configure the email notification for backup completion in Oracle 11g.
Please revert with the reply to my query.
RegardsThere is about emailing that is specific to backups. It is simply an OS utility. Google 'sendmail' and 'mailx'. Have your backup job (or any other job) create a log file, then use the OS mail utility to email that log file. -
Configuring RMAN for dataguard.
Hi all,
Here we have a dataguard environment with db1(db_unique_name) as primary and db2(db_unique_name) as physical standby database. For both primary and secondary the ORACLE_SID is 'oracledb'.We configured dataguard in 10g environments and we are not using grid control. And now we want to configure rman for incremental backups. We are using a third catalog database to which we registered from primary db successfully. During primary rman configuration it is showing conflicts. Even the changes made in primary RMAN configuration are applied on to the standby too which i think shouldn't happen in this scenario. How to resolve this issue? Is this happening because of the same ORACLE_SID for both primary and secondary? I'm attaching the link of the doc that we followed also the errors and configuration in rman. Can anyone help?
http://docs.oracle.com/cd/B28359_01/server.111/b28294/rman.htm#BAJFBBBB
RMAN> CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
new RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN-08591: WARNING: invalid archivelog deletion policy
RMAN> CONFIGURE DB_UNIQUE_NAME db1 CONNECT IDENTIFIER 'db1';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "db_unique_name": expecting one of: "archivelog, auxiliary, auxname, backup, channel, controlfile, clonename, compatible, datafile, device, default, exclude, encryption, maxsetsize, retention, snapshot"
RMAN-01007: at line 1 column 11 file: standard input
RMAN> show all;
starting full resync of recovery catalog
full resync complete
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10.2.0/db_1/dbs/snapcf_NIOS.f'; # default
Thanks.RMAN> show db_unique_name;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "db_unique_name": expecting one of: "all, archivelog, auxiliary, auxname, backup, channel, controlfile, datafile, device, default, exclude, encryption, maxsetsize, retention, snapshot"
RMAN-01007: at line 1 column 7 file: standard input
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, configure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, renormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
RMAN-01007: at line 1 column 21 file: standard input
But on this i'm getting response
SQL> select db_unique_name from v$database;
DB_UNIQUE_NAME
db1
same and db2 as db_unique_name for standby....
Edited by: 954758 on Sep 3, 2012 3:41 AM -
How to configure email Alerts in OEM Cloud 12c for Database Servers up/down
Hi everybody,
How to configure email Alerts in OEM Cloud 12c for Database Servers up/down status?
Regards,
Miguel VegaHi Miguel Vega,
Information regarding the notifications:
==============================
Configuring notification rules in 12c is different from earlier releases.
The concept and function of notification rules has been replaced with a two-tier system consisting of Incident Rules and Incident Rule Sets :
1. Incident Rules: Operate at the lowest level granularity (on discrete events) and performs the same role as notification rules from earlier releases.
By using incident rules, you can automate the response to incoming incidents and their updates.
A rule contains a set of automated actions to be taken on specific events, incidents or problems.
The actions taken are for example : sending e-mails, creating incidents, updating incidents, and creating tickets.
2. Incident Rule Set: A rule set is a collection of rules that applies to a common set of objects, for example, targets, jobs, and templates.
To help you to achieve the Notification Rules configuration, refer those notes :
How To Configure Notification Rules in 12C Enterprise Manager Cloud Control ? Doc ID 1368036.1
EM12c How to Add and Configure Email Addresses to EM Administrators and Update the Notification Schedule ?Doc ID 1368262.1
EM12c How to Subscribe or Unsubscribe for Email Notification for an Incident Rule Set ?Doc ID 1389460.1
EM 12c How to Configure Notifications for Job Executions ? Doc ID 1386816.1
Best Regards,
Venkat -
How to configure ActiveSync for a database table in IdM 7.0
Hi All,
Please suggest me the steps to configure ActiveSync in IdM 7.0.
when i try it by resource-->activeSync wizard it gives
"The ActiveSync Wizard has been deprecated in Identity Manager 7.0 in favor of using MetaView and the resource action "Edit Synchronization Policy". "
how to configure ActiveSync for a database table.
Thanx
ShantHi,
You need to a script and run it on os level. Here is an example:-
emcli relocate_targets -src_agent=agentmachine1.domain:3872
-dest_agent=agentmachine2.domain:3872 -target_name=RACDB
-target_type=oracle_database -copy_from_src -force=yes
-changed_param=MachineName:agentmachine2.domain
Regards
Jomon
Edited by: JohnJomon on Nov 17, 2011 2:27 PM -
Configure logshipping for report server database
Hi All,
Could some one please let me know the steps to be followed to configure logshipping for report server databases.
Thanks in Advance,
Regards, KranthiHi Kranthi,
Based on my understanding, you want to know how to change the roles between primary server and secondary server when primary server goes down. Also you want to know when you should install reporting service on secondary to make sure reporting service could
be used by application team.
When primary server goes down, you should manually fail over to the secondary server and make it your new primary server. Before changing roles between primary server and secondary server, you should initial role change. For more information, please refer
to this link: http://msdn.microsoft.com/en-us/library/ms178117.aspx.
Besides, considering lots of time of reporting service installation and downtime during failover, I recommend you to install reporting service on secondary before configuring log shipping. When application team want to use reporting service with reportserver
database after you performing fail over to the secondary server, you can follow bellow steps to reset the database which will be used by reporting service:
Open Reporting Services Configuration Manager\Database.
Click Change database in the Current Report Server Database section.
On Action page, check Choose an existing report server database box. Click Next.
On Database Server page, type the secondary sever name then connect to it. Click Next.
On Database page, select the reportserver database from the drop-down menu of Report Server Database. Click Next.
Set the credentials, then click Finish on Progress and Finish page.
If you have any questions, please feel free to ask.
Best regards,
Qiuyun Yu -
Configure RAC for SAP on Oracle database
My client has SAP installed on oracle 10g database, they want me to configure RAC so that 4 other servers will share the same database as the the production database.
can anyone guide me on how to go about it
I have already installed SAP on the 4 other servers and exported the database into the new server. can anyone guide me on how to configure RAC for oracle 10g database?Hi,
You can find the related information, under the link below;
SAP on Oracle Real Application Clusters (RAC) [original link is broken]
I recommend you to read the document, Oracle 10g RAC on SAP Netweaver;
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d149ec34-0d01-0010-4791-db4f1d864576?quicklink=index&overridelayout=true
Best regards,
Orkun Gedik -
Cannot execute Install for database ORACLE_HOME
Dear ALl,
EBS 11.5.9 with Windows 2003, during multi-node installation error.
log file
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 11.5.9.21
>> Install session started : Fri Jul 25 17:41:05 GST 2008
>> Rapid Wizard source location : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
>> Command Line arguments for this execution :
=================================================================
Install Session Information
Host Name : sysd.apps.com
Host Operating System : Windows 2000
User running Install : applmgr
=================================================================
InstUpgPanel - User chooses to Install Oracle Applications
NumNodesPanel - Multi-node Selected
SIDSeedPanel - The PROD database is set to PROD fresh install database
ProductPanel - The following are the selected Product Groups for instance PROD
Basic
E-Business Intelligence
Marketing
TeleSales
Field Sales
Order Management
Inventory Management
Purchasing
Discrete Manufacturing
Process Manufacturing
TeleService
Service Contracts
Project Costing
Project Billing
Financials
Human Resources
ProductPanel - The following are the selected Product for instance PROD
0
160
190
265
601
174
175
690
874
709
454
452
450
558
451
530
517
520
549
670
691
882
521
676
880
696
697
660
522
544
869
676
279
697
660
702
401
665
673
401
665
201
202
250
401
702
703
704
705
706
712
550
551
552
553
554
555
556
557
514
511
542
862
696
872
170
866
518
515
510
870
524
542
275
275
101
140
200
222
240
260
600
8400
8401
8450
8901
231
673
800
804
8301
8302
TerritoryPanel - The following are the selected settings for instance PROD
LanguagePanel - The following are the selections from the Language Panel:
US - American_English
US - American_English
US7ASCII
US7ASCII
AMERICA
MultiNodePanel - Selected nodes:
[Ljava.lang.String;@eddac
[Ljava.lang.String;@7b7565
[[Z@583cf4
QuickPanel - Empty Fields were encountered. Number of empty Fields:1
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME created:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory created:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.apps.com
Ping request could not find host sysm.apps.com. Please check the name and try again.
Error - host.domain ping has returned an error: 1
System variable PATH set to:
C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password appsa.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
appsa.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME available:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory available:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.appsa.com
Pinging sysm.appsa.com [208.87.33.150] with 32 bytes of data:
Reply from 208.87.33.150: bytes=32 time=295ms TTL=48
Ping statistics for 208.87.33.150:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 295ms, Maximum = 295ms, Average = 295ms
host.domain ping has suceeded
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
Install Oracle 9i technology stack for PROD.
Install Oracle Applications Database Seed for PROD.
DoInstallPanel - User continued install at warning dialog.
DoInstallPanel - Beginning install for all users.
Starting from Rapid Install Full Stage area D:\Stage_area_11.5.9\oraDB\Disk1
RapidWiz location: D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
Install Media location: D:\Stage_area_11.5.9\startCD\Disk1
APPL_TOP location: e:\oracle\prodappl
Database ORACLE_HOME: e:\oracle\proddb\9.2.0
Database SID: PROD
Database Context Name : PROD_sysd
Creating 9.2.0 DB Context from D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp to e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Total number of processes in Current Install 3
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
Creation of Directory - E:\oracle\proddb\9.2.0\temp\PROD_sysd Succeeded.
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun8i.cmd 115.24 2003/07/17 00:44:02 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM Print out the program name and start time
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 8i will only happen, if database is "db817"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db817" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>goto :SCRIPTEND
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set date=Fri 07/25/2008 )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set time=05:49 PM )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Database ORACLE_HOME installation succeeded"
"Database ORACLE_HOME installation succeeded"
e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS has suceeded
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Please guide.Hi,
Thank you for reply, i have changed the stage directory name but error is this one appearing, you can check above log file.
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
------------------------------------------ -
Configuring Maven for a new Project
Could anyone provide inputs on how to configure Maven for a new project?
I am referring to links
http://maven.apache.org/guides/getting-started/index.html#How%20do%20I%20setup%20Maven?
http://maven.apache.org/guides/mini/guide-creating-archetypes.html
Rgds,
seeteshWe are introducing a new feature in Flex 2.0.1 that's due out
early next year. The feature is called "Modules" and it was
discussed at this year's MAX 2006. You can read more about it on
Roger Gonzalez's blog:
http://blogs.adobe.com/rgonzalez/
- check the "Modular Applications" articles. I think this will go a
long way to making the reusable parts you are talking about.
Flex does not build things from instructions unless they are
written in ActionScript. We have customers that do create dynamic
interfaces based on data loaded from a database, so it is possible.
But if you have pre-built templates and all you need to do is
change certain aspects at runtime, it should be pretty easy with
Flex. Take a look at the Flex documentation, especially the part
about the Flex framework and how Flex sources are compiled into
SWFs.
You style Flex components using style sheets (CSS files).
This also includes specifying skins for components if you decide to
give something a whole new look.
I'm a bit biased here, but I think using ColdFusion (version
7.0.2) with Flex 2 is very easy. But it depends on your needs,
budget, deployment, etc. WIth CF 7.0.2 and Flex Builder 2 you get
wizards to be build both CFC (ColdFusion components) and matching
ActionScript objects so that you exchange objects, not just data,
between Flex and CF.
WebServices can also be used (with CF, too). This gives you
more choices to the backend. If you have a large amount of data or
it is complex, consider Flex Data Services as that has data
management capabilities.
Flex 2 has localization capabilties. You create a 'resource
bundle' in various languages and build SWFs for each one. When the
end user choses their preference, take them to the page that loads
the appropriate SWF.
HTH -
Best practices to reduce downtime for Database releases(rolling changes)
Hi,
What are best practices to reduce downtime for database releases on 10.2.0.3? What DB changes can be rolling and what can't?
Thanks in advance.
Regards,
RJiv.I would be very dubious about any sort of universal "best practices" here. Realistically, your practices need to be tailored to the application and the environment.
You can invest a lot of time, energy, and resources into minimizing downtime if that is the only goal. But you'll generally pay for that goal in terms of developer and admin time and effort, environmental complexity, etc. And you generally need to architect your application with rolling upgrades in mind, which necessitates potentially large amounts of redesign to existing applications. It may be perfectly acceptable to go full-bore into minimizing downtime if you are running Amazon.com and any downtime is unacceptable. Most organizations, however, need to balance downtime against other needs.
For example, you could radically minimize downtime by having a second active database, configuring Streams to replicate changes between the two master databases, and configure the middle tier environment so that you can point different middle tier servers against one or the other database. When you want to upgrade, you point all the middle tier servers against database A other than 1 that lives on a special URL. You upgrade database B (making sure to deal with the Streams replication environment properly depending on requirements) and do the smoke test against the special URL. When you determine that everything works, you configure all the app servers to point at B and have Streams replication process configured to replicate changes from the old data model to the new data model), upgrade B, repeat the smoke test, and then return the middle tier environment to the normal state of balancing between databases.
This lets you upgrade with 0 downtime. But you've got to license another primary database. And configure Streams. And write the replication code to propagate the changes on B during the time you're smoke testing A. And you need the middle tier infrastructure in place. And you're obviously going to be involving more admins than you would for a simpler deploy where you take things down, reboot, and bring things up. The test plan becomes more complicated as well since you need to practice this sort of thing in lower environments.
Justin -
Standby database not configure while keep database files in different place
Dear Friends ,
I have to successfully configured "PHYSICAL STANDBY DATABASE" within the TWO databases ("PRIM" and "STAN" Database) when I kept datafile, controlfile and redolog files in the same location (like, "/u01/app/oracle/oradata/prim" location .
In this successful configuration , I have to add the below two lines into the initprim.ora and initstan.ora both server respectively ...
initprim.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/stan','/u01/app/oracle/oradata/prim'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/stan','/u01/app/oracle/flash_recovery_area/prim'
initstan.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/prim','/u01/app/oracle/oradata/stan'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/prim','/u01/app/oracle/flash_recovery_area/stan'Now , in second scenario , I have to change Primary database server's datafile, controlfile and redolog file in the below folder :
controlfile --> "/u01/app/oracle/oradata/prim/ctrlfile"
redologfile --> "/u01/app/oracle/oradata/prim/redofile"
datafile --> "/u01/app/oracle/oradata/prim/datafile"
Similarly I have to create same folder in my STAN database server accordingly . and also add the above lines in same way :
initprim.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/stan','/u01/app/oracle/oradata/prim'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/stan','/u01/app/oracle/flash_recovery_area/prim'
initstan.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/prim','/u01/app/oracle/oradata/stan'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/prim','/u01/app/oracle/flash_recovery_area/stan'Keeping the above situation when I run the below command in STAN database server :
[oracle@test ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 15 23:15:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup mount
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1220772 bytes
Variable Size 163581788 bytes
Database Buffers 427819008 bytes
Redo Buffers 7163904 bytes
Database mounted.
SQL> alter database recover managed standby database disconnect from session;
Database altered.
The Command execute successfully but in the alert log of the STAN database server ,I get the below error :
Completed: alter database recover managed standby database disconnect from session
Mon Nov 15 22:46:52 2010
Clearing online redo logfile 1 complete
Mon Nov 15 22:46:52 2010
Errors in file /u01/app/oracle/admin/stan/bdump/stan_mrp0_3695.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/prim/redofile/redo02.log'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Nov 15 22:46:52 2010
Errors in file /u01/app/oracle/admin/stan/bdump/stan_mrp0_3695.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/prim/redofile/redo02.log'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3But I already created the above mention folder "'/u01/app/oracle/oradata/prim/redofile" successfully and the redo log files are also created there successfully , but I cannot understand why this error is showed ? And also no archivelogs are shifted from PRIM database server to STAN database server .
Would u plz suggest me , why I cannot configure Physical Standby Database when I keep my database fles in the separate location ?
help me plz ... ...Hi,
I'm missing the steps you took renaming/moving the files on the primary.
Since the location of datafiles is stored in the control file the controlfile of the standby might not know the new location yet.
I suggest you read this http://www.cs.bris.ac.uk/maintain/OracleDocs/server.816/a76995/standby.htm#23603 and see if that helps
Success,
FJFranken -
The transaction log for database 'SharePoint_Config' is full
Hi all ,
I am very new to sharepoint. when i tried to remove a wsp file from central administration i got the message like
The transaction log for database 'SharePoint_Config' is full. To find out why space in the log cannot
be reused, see the log_reuse_wait_desc column in sys.databases.
Can anybody help me to solve this please. I saw one solution in net like this but i don't know how to do this. Can anybody help me how to do these steps please.
1.
Take the configuration database offline and detach it
2.
Copy the current MDF to a new location (to be used as a way of recovering the database if needed)
3.
Put the database back on-line, reattach it and then put it within simple mode (from full), with an aim of this stopping the database from
increasing in size
4.
Shrink the database and recover log space
5.
Should the shrinking fail, we'd look at detaching the database, making a sideways copy of the log file to another database
6.
We would then reattach the database, which should generate a new log file
Thank youHi Soumya,
I don't have any dba resource. And it is not a lab environment. It's Corporate environment.
Thanks alot for ur quick reply.
I normally don't just come onto the threads and tell people that they need a consultant, but you might want to look at getting a consultant to help make sure that your SharePoint environment is health and can be restored in the event of a server failure.
Based on the problem that you have described it might not be recoverable, or at least it might not be as recoverable as you want it to be.
At the very least you'll want to watch this video of my session at TechEd 2014 which talks about backups and how to set them up.
http://channel9.msdn.com/events/TechEd/NorthAmerica/2014/DBI-B214#fbid=
Thank You,
Denny Cherry
Maybe you are looking for
-
How do i connect a led cinema display 27" to notebook with hdmi port
how do i connect a led cinema display 27" to notebook with hdmi port
-
How do I remove my apple id from my sons ipod and give him his own??
How do i remove my appl id from my sons ipod and give him his own
-
Issue ith Long text in Quality Notification.
Hi All, I have an Issue with Quality Notification long text change functionality.User reported that he can only append the additional text and can't edit the alaready entered screen. When I verified the config for the notification type it shows that
-
IMac shut down playing radio over itunes
An iMac from 2009. It was left alone over an hour playing a radio station over itunes. When came back the computer had shut down, & can be turned back on. Touching the keyboard didn't wake it up. Tried option, command, escape. Pressed on switch in ba
-
Continuous "Do Not Disconnect" sign.
Hey, I hope you can help. Whenever I connect the cable to the iPod a "do not disconnect" sign appears. It goes on for hours. I'm using Windows Media Player to sync songs because iTunes wouldn't connect with my iPod since it told me to reinstall it an