Configuring Help Files

Hi everyone,
I would like to modify some of the help files that come out-of-the-box with Identity Manager.
The help files are contained within idm.jar. Is it best practice to go
into these files and change them directly? Or is there an alternative
way to do this? I believe you may be able to place them into
IDMDirectory/WEB-INF/classes directory and manipulate them from there - however, despite the changes made here being displayed on the screen, an exception is shown on stdout stating no help file is available for this page.
Has anyone done this before?

I tried to do this as you suggested, configuring a file and then placing it in the doc folder within the idm directory. I also tried placing the whole com directory but this didn't work.
Have you tried this previously? Any other suggestions?

Similar Messages

  • Where can I get PDF help files for Oracle9i?

    In Oracle8 and Oracle8i, there were PDF documentation files on the install CDs for Oracle8i Reference, Administrators Guide, SQL Reference, SQL*Plus, etc., etc. Are these available anywhere for Oracle9i? I didn't see any documentation option on the download site or on the CD (except for the smaller subset of configuration help files, but I am looking for the larger reference books mentioned before).
    Thanks!
    Chris

    Hi,
    Here's another link for Ps CS5 PDF help:
    http://help.adobe.com/en_US/photoshop/cs/using/photoshop_cs5_help.pdf
    And for Creative Suite with links to the CS5 point products:
    http://helpx.adobe.com/content/help/en/creative-suite/archive.html
    regards,
    steve

  • Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS

    Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
    Message was edited by: Hermann Koster
    Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
    Any suggestions or advice?
    Once again thank you very much for your reply.
    Cheers,

    The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS.  This is mainly because the RAM designed to fit with the customized Linux OS's size.
    You can connect to an external HDD via a  USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
    You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
    Hope that helps!!

  • How do I generate a Word document and a PDF from Help files?

    Hi,
    I am new to RoboHelp HTML, and am using version 8.  I updated some Help files, and now I want to generate output.  Here are my questions/ or the process I used:
    To compile the help, I clicked Generate Primary Layout.  Is this correct?  I noticed that the date stamp on the xpj file has not changed.  The date is still from many months ago.  (Why is that?  Should it show a recent update date?)  However, the files that I updated do reflect the dates when I made the updates.  These include art files, an hhp, and htm, js, ldb, pss, cpd files.
    To generate a pdf, I clicked Generate PDF.  I was not able to generate the PDF at first, but then, I enabled macros in Word 2007 (Trust Center Settings > Enable all macros...and clicked the checkbox, Trust access to the VBA project object model), and clicked Generate PDF.  At the end of the generation, I got this error in Word: Microsoft Office Word has encountered a problem and needs to close.  We are sorry for the inconvenience.  The info you were working on might be lost.  Word can try to recover it for you.  I closed the dialog and Word generated several blank documents.  Microsoft Office Diagnostics was run and found one problem and corrected it.  Despite the error message, a pdf was generated.  (If you could give me any insight on why I got the error messages, that could be helpful to know).
    How do I generate a Word document?
    Thank you!
    Erin

    Welcome to our community
    Note that RoboHelp is capable of creating a variety of layouts. WebHelp, FlashHelp, AIR Help, Microsoft HTML Help, JavaHelp, Oracle Help, ePub and more.
    Any of these layouts may be nominated as the Primary layout. So when you generate the Primary layout, you get whatever has been configured as the Primary layout.
    Only certain actions will result in a change to the .XPJ file. The actions are indicative of major changes to the project. So I wouldn't fret the fact that the date time stamp wasn't updated.
    Indeed the Printed Documentation Single Source Layout recipe is what you use to create PDF. Generally what happens is that RoboHelp creates a Microsoft Word document as an intermediate file type, then creates the PDF from that. As you might imagine, there are a host of things that can go wrong during the process. I might suggest that you first get a Word document to generate cleanly. Then once you do that, focus on PDF. I know that I typically gen a Word document and stop there. I just open Word and use Word to create the PDF.
    If you look at the properties for the Printed Documentation Single Source Layout recipe (View > Pods > Single Source Layouts then right-click the Printed Documentation layout and choose Properties) you will see that PDF, Word or both are options at the top of the dialog.
    Hopefully that gives you a nudge in the right direction.
    My fellow Adobe Community Expert Peter Grainge has excellent info on Printed Documentation on his site at Grainge.org. Click the link below for that.
    Click here to visit Peter's site
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcererStone Blog
    RoboHelp eBooks

  • Configuring the file server in KM and access,edit the documents from it

    Hi friends,
      My requirement is to configure the file server where u will have all the structured and unstructured data stored here. So users can share the documents and create, edit ,save the documents from the file server itself.
    In KM what kind of file servers are there apart from the one it supports by default.
    Can anybody pls provide the configuration steps regarding how to configure the file server i KM.
    To configure the file server is webDAV protocol required?
    Points would be assigned for the helpful answer.
    Thanks in advance.
    Regards
    Sireesha.

    Dear Sireesha,
    Well KM supports mostly all the File server however we have some restrictions with Novell FS and Sharepoint Server from Microsoft. Like versions and other meta data have some issues.
    Alsothough to configure a File Server you need to first create a FS repository Manager. Details can be found in the help guide:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm">FS Repository Manager</a>
    Yes WebDAV protocol is required here.
    You can create WebDav RM as well.
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm">WEBDAV</a>
    The above links will help answer your queries.
    Regards
    Anjali

  • MDT 0xc0000098 The windows boot configuration data file does not contain a valid OS entry

    hello,
    i installed WDS+MDT for OS deployment. all was working fine.
    Now i need our branch office to be able to deploy OS as well.
    I installed a new Win 2008R2 server, and installed the WDS service on it.
    When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
    when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
    after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
    Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
    1. insert your windows installation disk and restart your computer
    2. choose your language, and then click "Next"
    3. Click "Repair your computer"
    If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
    File: \Boot\BCD
    Status: 0xc0000098
    Info: The windows Boot Configuration Data file does not contain a valid OS entry.
    I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
    Now it's not working. I tried several computer, even new ones, and NADA.
    someone know the cause?
    I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
    thanks a lot for your help

    hello,
    i installed WDS+MDT for OS deployment. all was working fine.
    Now i need our branch office to be able to deploy OS as well.
    I installed a new Win 2008R2 server, and installed the WDS service on it.
    When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
    when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
    after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
    Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
    1. insert your windows installation disk and restart your computer
    2. choose your language, and then click "Next"
    3. Click "Repair your computer"
    If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
    File: \Boot\BCD
    Status: 0xc0000098
    Info: The windows Boot Configuration Data file does not contain a valid OS entry.
    I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
    Now it's not working. I tried several computer, even new ones, and NADA.
    someone know the cause?
    I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
    thanks a lot for your help
    For a branch solution I would use DFS(R) rather than linked deploymentshares.
    If there is infrastructure at the remote sites you could use the MDT environment at your main site, and  then at each other site use an existing server or build a new server (VM is available). Create a Deploymentshare on each sever
    and copy the contents of the MDT environment from the first site into this share.  Next you will have to add the WDS service to each site's server. For WDS add the boot image. Of course as Keith noted ensure that you
    have the same versions of MDT and the WAIK/ADK on all systems
    You can use DFS to replicate to all of the other sites, but you will still have to create a deploymentshare, and install WDS at each site. So each site talks to its own WDS server you can use the DefaultGateway parameter instead -
    [Settings]
    Priority=Default, DefaultGateway
    [Default]
    SkipBDDWelcome=YES
    [DefaultGateway]
    192.168.10.1=Bergen
    192.168.20.1=Oslo
    [Bergen]
    DeployRoot=\\MDT-Bergen\DeploymentShare$
    [Oslo]
    DeployRoot=\\MDT-Oslo\DeploymentShare$
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • No local help files for Photoshop CS6 extended

    Hi
    I wish to use local help files for Photoshop CS6 but only online support is available. Local files are not listed under the Adobe Help preferences. The option to search only local rather than online help is greyed out. I found and downloaded a PDF with of the help files but don't know where to install it or if this is possible. I have CS 5 Creative Suite and this works fine giving the option of local or online help when accessed.
    Is there a way to install and use local help files in photoshop CS6?
    Thank you.

    Hi and thanks for directing me to that article, it should have done the trick. I am using mac mountain lion 10.8.5.
    The help system has always operated oddly - I have Photoshop cs6 but also the cs5 master suite installed. CS5 works fine but Photoshop cs6 only gives the option for online help and then directs me to the CC site. There is no simple listing for just Photoshop help in the help menu - presumably as it is not seeing it installed
    I tried various configurations in the article, having to set up the folders they suggested. In my case, in a variety of alternative places as I have a boot up volume with the documents folder moved onto a RAID array so the Shared folder is not in the documents folder but in Users on the boot drive. So - confusing - but tried all the likely candidates and folder configurations/locations while following the instructions as closely as possible. Even tried an documents folder alias to redirect the program to the alternative path way.
    At least now I have the PDFs and can look through them outside the adobe interface. The problem with the community site being questions regarding photoshop alone, yield answers for all sort of other issues and programs.
    Thanks for your help though, which should have worked, appreciated.

  • HP Stream 7 The boot configuration data file is missing some required information

    I have an HP Stream 7 tablet.  When I open it up it shows a blue screen with the error "The boot configuration data file is missing some required information."  Can anyone help as I can't get into the tablet to solve the error!

    Hey @PaD2 ,
    Welcome to the HP forums.
    I understand you're unable to boot up your Stream 7 tablet.
    Try accessing the recovery partition by holding the volume down button and power button at the same time. Please excuse my ignorance, as exact information on accessing the recovery manager appears to be unavailable for this exact model. If the down button doesn't work, up should get you in.
    Once in the recovery manager you should be able to select Troubleshoot > Startup repair. 
    If the startup repair does not fix the issue I would suggest trying the full system recovery option, which you should find under Troubleshoot > Advanced.
    Thanks.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Flash CS3 doesn't find Help file

    If I'm looking at the actionscript in a .FLA file, and I
    press F1 with the mouse cursor over a word like 'trace', it takes
    me directly to the help page on the trace() function. Perfect.
    However, if I am looking at code in an external .as file and
    do the same thing, it doesn't work. I get a popup:
    Cannot find
    ...:/ProgramData/Adobe/Flash%20CS3/en/Configuration/HelpPanel/Help/ActionScriptLang...
    Make sure the path or Internet address is correct.
    How can I make this work?

    quote:
    Originally posted by:
    BWolfe [ADOBE]
    Hmmm. Can't repro on my side in XP. What OS are you running?
    I actually have 2 installs, one is on XP and one is on Vista.
    They both do the same thing.
    Is there a way to set the path to the help file that is
    accessed when the user presses F1? That would probably solve the
    problem.

  • Configure log file transfer to downstream capture daabase!

    Dear all,
    I am setting up bidirectional replication among 2 database server that are Linux based and oracle 11gR1 is the database.
    I am following the document Oracle Streams Administrator Guide, Have completed all the pre-configuration tasks but I have confusion with this step where we have to configure log file transfer to downstream capture database.
    I am unable to understand this from the documentation.
    I mean how do I configure Oracle Net so that the source database can communicate with each other in bi-directional replication?
    Configure authentication at both databases to support the transfer of redo data? How can I do this?
    Third thing is the paramter setting that obviously i can do
    Kindly help me through this step.
    Regards, Imran

    and what about this:
    Configure authentication at both databases to support the transfer of redo data?
    Thanks, ImranFor communication between the two databases, you create streams administrator at both the databases. The strmadmin talk to each other.
    Regards,
    S.K.

  • New Bee, Help File Adapter

    Hi ,
       I am new to XI , I have a basic question on file adapter.
        I have configured a file adapter to pick a file with name abc.txt and delete it. Assumes my total scenario takes 30 min to complete. If i get another file in the source folder after 5 min. Does XI process the second file also parallel. Or does it finish first file and then process the second file?
    Regards
    Monika Dietz

    Hi,
    >>>>Or does it finish first file and then process the second file?
    the file adapter will pick the file as soon as possible
    from the folder but you can set quality of service
    EOIO so it will wait until the first one will finish
    (and other parameters in the integration eigine
    so your flow will be processed by one queue only)
    but basically it will be processed in paralel
    (with standard config)
    reference:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
    Regards,
    michal

  • How to install BPC help file

    Can somebody point me in the right direction for installing the SAP help files for BPC.   I have installed BPC, it's configured and working, but a user says there's supposed to be help file and I can't find anything about them in the installations and master guide.

    As indicated above, help files do exist in MS version within the application.  Perhaps you're inquiring the NW version which does not have the help file within the application.  In that case, you need to go to help.sap.com and find the BPC help file for NW.
    The right navigation would be
    help.sap.com->SAP Business Objects->Business Planning and Consolidation->SAP BPC 7.0 version for SAP NetWeaver.
    You will also find the help file for other versions here as well.
    -Ken

  • How to install help files on BI 7.0 bex analyzer

    Hi All
    I have successfully installed the help files for my abap stack on BI 7.0, by configuring transaction SR13 to point to the help DVD on our file server.
    However, when I try to go to help in the new version of the analyzer, I get the following error:
    Help Type 5 is not valid for the platform NONE
    Exception 5 when calling IWB_HTML_HELP_URL_GET occurred.
    Does anybody have an idea how to fix this please.
    Thanks
    Sam

    Hi All
    I will e-mail all those that have asked for a screen dump. I will also include the instructions below:
    1. Copy the PlainHTMLFile and the HTMLHelpFile from the Help cd to a windows servers
    2. Goto transaction SR13
    For BEX Analyser Help
    1. To install the BEX help files, click on the PlainHTMLFile tab
    2. In the Platform Filed enter NONE
    3. In the Area Field enter IWBHELP (or you can select documentation from the drop down)
    4.In the PATH field enter the path of the PlainHTMLFiles that you copied to your server (i.e C:\Help\PlainHTML\BEXHELP\helpdata)
    5. In the Language field, enter EN
    6. Click on DEFAULT check box.
    7. Save your changes
    For Abap stack Help
    1. To install the Abap help files, click on the HTMLHelpFile tab
    2. In the Platform Filed enter WIN32
    3. In the Area Field enter IWBHELP (or you can select documentation from the drop down)
    4.In the PATH field enter the path of the HTMLHelpFile that you copied to your server (i.e C:\Help\HTMLHelpFile\helpdata)
    5. In the Language field, enter EN
    6. Click on DEFAULT check box.
    7. Save your changes
    Please let me know if anybody needs more assistance
    Thanks
    Sam

  • Error in configuring Windows File System Repository

    Hi All,
    While trying to configure Windows File system repository we are getting the following error
    1. Getting this error when we give
    <ip address>\<shared folder name>
    Startup Error:  The localroot does not exist:
    10.1.100.44\Shared_folder
    2. Getting this error when we give
    <ip address>
    Startup Error:  host is unkown in file path '
    10.1.100.44' - invalid network path:
    10.1.100.44
    Could any one help in solving this issue.
    Regards,
    Sravanthi

    Hi Chiluveru Sravanthi
    According to the documentation, there is a difference between the path syntax for the repository manager and the network path. Did you pay attention to this difference when doing your configurations?
    Network paths (Network Path)
    Specifies the path to the Windows remote server.
    The path consists of the IP address of the Windows remote server, and a path specification.
    For example,
    192.168.0.1share
    Alternatively, you can enter the UNC name and path of the server, for example,
    servershare.
    SAP recommends that you specify the IP address, since you can then check the availability of the server more easily, using the ping command.
    Note: It is not sufficient to enter the server name alone. Specifications in the form of c$ cannot be resolved either.
    http://help.sap.com/saphelp_nw70/helpdata/EN/63/7f283ac3d7c54b94964931fa1b4ed9/frameset.htm
    File System Repository Manager (Root Directory)
    This denotes the path to the root directory in the file system to which the repository manager is assigned.
    If you want to integrate documents from a Windows system, this can be a drive letter (followed by a colon) or directory path on the local server or a remote server share (for example, //myserver/myshare/somedir).
    If you are running your portal on UNIX and want to access the file system on another UNIX host, you must mount the required directory on the portal server.
    Example path when using a UNIX system:
    /usr/company/share
    The repository manager is responsible for the specified directory and all its subdirectories.
    Note that multiple repository manager configurations are not allowed to have the same subpath in their Localroot parameter.
    http://help.sap.com/saphelp_nw70/helpdata/EN/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
    Best regards,
    Martin Søgaard

  • Configuring help

    When pressing the help button, the browser still starts with an URL pointing to 4.7, but we are on ERP 2005. Where can i configure/change this so that the ERP 2005 help files are shown?

    ask ur basis person , he can link /Upload SAP  help.
    Regards
    Prabhu

Maybe you are looking for