Configuring JMS Sender

Dear All
We have to use a third party JMS queue (JCAPS) as a sender in our scenario for PI 7.1. We are using Acess JMS provider with JNDI protocol. We have got the required necessary JAR files from the JMS Queue provider and the same has been deployed.
Apart from this what are the configurations from the Basis side that needs to be completed in order to use the JMS queue?
Regards
Sourabh
Edited by: Sourabh Nirmal on Oct 27, 2009 9:22 AM

Hi SDN,
This is very important for me. Can anybody resolve the problem.
The scenario is MQ --> SAP. I have configured sender JMS adapter like this.
Transport protocol : WebsphereMQ(nonJms)
QueueConnectionFactory Java Class : com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class: com.ibm.mq.jms.MQQueue
IP Address or Server Name: XXXXXXX
Server port: 1421
Queue Manager Name: TestAPI
Channel name : TestAPI
JMS Queue: TestQ
XI settings:
mapping of message: Message payload= JMS payload
Please let meknow if you need any more details.
Regards,
Mansoor

Similar Messages

JMS sender error in case MQ websphere---Please help

Hi SDN,
I am stuck in configuring JMS sender adapter for MQ series.After creating all objects
I have activated the scenario.I got an exception message in the sender JMS channel.It is :
XI inbound processing failed for message at 2007-05-08|13:30:21.009+0300. JMS and XI identifiers for the message are ID:414d512046494b594d5a2020202020204614d148001e50e2 and 1f7c5fd0-fd4f-11db-ab43-aabfb000d002 respectively. The JMS adapter will rollback the database and JMS session transactions. If the session is transacted, the message is not lost and will be retried later. The exception stack trace is java.lang.Exception: Exception thrown in method process. The transaction is marked for rollback.
at com.sap.aii.af.service.jms.WorkerJMSReceiver.onMessage(WorkerJMSReceiver.java(Compiled Code))
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java(Compiled Code))
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java(Compiled Code))
Please help. The scenario is MQ ---> SAP.
Regards,
Mansoor

Hi SDN,
This is very important for me. Can anybody resolve the problem.
The scenario is MQ --> SAP. I have configured sender JMS adapter like this.
Transport protocol : WebsphereMQ(nonJms)
QueueConnectionFactory Java Class : com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class: com.ibm.mq.jms.MQQueue
IP Address or Server Name: XXXXXXX
Server port: 1421
Queue Manager Name: TestAPI
Channel name : TestAPI
JMS Queue: TestQ
XI settings:
mapping of message: Message payload= JMS payload
Please let meknow if you need any more details.
Regards,
Mansoor

JMS Sender adapter configuration

Hi,
I have a problem in configuring my JMS sender adapter. My source structure is in the form of a FIXED lenght file.
Its structure is as follows:
Rec ID Required Loop repeat
SHC R 1
SCO R 1
SAM O n
SCD R 1
SCP O n
LTX O n
SCC O n
SUM R 1
where R indicates Required record type
 O indicates Optional record type
1 indicates the record type occurs only ONCE in a record
n indicates the record may occur 0 to unbounded times in the record.
This is how I have defined my record set structure in the Module tab of the JMS adapter configuration.
SHC,1,SCO,1,SAM,,SCD,,SCP,,LTX,,SCC,*,SUM,1
The problem with this configuration is that the adapter expects the input file in this format
SHC
SCO
SAM
SAM.
SAM
SAM
SCD
SCD
SCD
SCD
SCP
SCP
SCP
SCP
LTX
LTX
LTX
LTX
SCC
SCC
SCC
SCC
SUM
Whereas my input file format has the following structure
SHC
SCO
SAM
SAM
SCD
SCP
SCC
SCD
SCP
SCPSCC
SCC
SCD
SCP
SCC
SCC
Could please tell me how I can handle this in my adapter config. I have gone through the following How To guide "How to ...Use the Content Conversion Module within the XI 3.0 J2EE JMS Adapter" but dont find how I can do this.
Cheers.

HI,
Please see the below content conversion parameters
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla

Doubts in JMS Sender adapter configuration (SonicMQ JMS Provider)

Hi All,
I am doing a TIBCO--> XI integration using JMS sender adapter. Adapter status is as follows..
"Sender channel. Details: (No detail information set.)".
XML Msg in TIBCO-ems queue which JMS adapter access is as follows.....
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Studdetails xmlns:ns0="http://abc.com/xi101/XSLTmap">
 <Records>
 <student_ID>
 <fname>abc</fname>
 <lname>efg</lname>
 <DOB>11/09/1980</DOB>
 <marks>
 <science>90</science>
 <maths>78</maths>
 <lang>80</lang>
 </marks>
 </student_ID>
 </Records>
</ns0:MT_Studdetails>
My Queries...
what will be the Msg selector entry for my JMS sender Adapter? Is it MT_Studdetails???
My sender adapter is green in RWB Adapter Monitor, but I am not able see my msg in SXMB_MONI. why it is so??
regards,
Raks

Hi,
Did you follow the how-to guide available at SAP Marketplace to deploy the JMS Adapter. If so, i believe the information given in that guide is incomplete.
Once you have installed the JMS Driver, you must deploy the Java libraries on the J2EE server so that the JMS adapter can access the required Java classes at runtime.
If you use MQSeries 53x.xxx, you must enter the following JAR files in aii_af_jmsproviderlib.sda.
com.ibm.mq.jar
com.ibm.mqbind.jar
com.ibm.mqjms.jar
connector.jar (use the JAR file from the J2EE client directory)
and if ur question is, "Where do I get the Java Library from "
The required Java libraries are product-specific and can be obtained from either the product vendor or other providers.
And i guess the 4 jar files should be enough. Just remember to add these 4 jar files to 'provider.xml' file inbetween the <jars>..</jars> tag.
Follow the instructions as per the guide,
https://websmp205.sap-ag.de/~sapdownload/011000358700003994312004E/HowTo_ConfigExtAdapters.pdf
But just remember to have all the 4 jar files in aii_af_jmsproviderlib.sda
Regards,
Abhy

JMS Send Transaction Failing, due to resources could not be assigned

I am trying to get a transaction of a JMS send to work where the origination of the send occurs in domain A and the message queue is hosted in domain B. I have been able to get this to work; however, this issue has shown up in recent tests. I haven't changed anything other than the version of the Oracle database client that is being used. I don't see any relationship between that and the persistent store.
Both domains are hosted on the same computer and both domains are simple development domains. Trust is established between the domains using 'global trust'.
I'm running Weblogic Server 10.3.4..
I'm not sure how to get around this issue. I can't find any documentation...
My suspicion is that there needs to be some special configuration for the transaction, since I'm using the default persistence store. The warnings seem to indicate the problem. The AdminServer is hosted on domain A and the AuditAdminServer on domain B...
Any assistance will be greatly appreciated!
Thanks in advance...
Here is the stacktrace:
<Apr 11, 2013 11:17:05 AM MDT> <Warning> <JTA> <BEA-110405> <Resource WLStore_audit_domain__WLS_AuditAdminServer was not assigned to any of these servers: AdminServer AuditAdminServer >
<Apr 11, 2013 11:17:25 AM MDT> <Warning> <JTA> <BEA-110405> <Resource WLStore_audit_domain__WLS_AuditAdminServer was not assigned to any of these servers: AdminServer AuditAdminServer >
<Apr 11, 2013 11:19:47 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Name=[EJB gov.va.med.datasharing.core.ServiceBusImpl.processInbound(java.lang.String,java.lang.Object)],Xid=BEA1-003FA101855115C0DB45(13340960),Status=Rolling Back. [Reason=javax.transaction.SystemException: Aborting prepare because the following resources could not be assigned: WLStore_audit_domain__WLS_AuditAdminServer],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=183,seconds left=22,XAServerResourceInfo[DefaultXADataSource_vhie_domain]=(ServerResourceInfo[DefaultXADataSource_vhie_domain]=(state=rolledback,assigned=AdminServer),xar=DefaultXADataSource,re-Registered = false),XAServerResourceInfo[WLStore_audit_domain__WLS_AuditAdminServer]=(ServerResourceInfo[WLStore_audit_domain__WLS_AuditAdminServer]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_vhie_domain_VhieFileStore]=(ServerResourceInfo[WLStore_vhie_domain_VhieFileStore]=(state=rolledback,assigned=AdminServer),xar=WLStore_vhie_domain_VhieFileStore1316539,re-Registered = false),SCInfo[vhie_domain+AdminServer]=(state=rolledback),SCInfo[audit_domain+AuditAdminServer]=(state=rolling-back),properties=({weblogic.transaction.name=[EJB gov.va.med.datasharing.core.ServiceBusImpl.processInbound(java.lang.String,java.lang.Object)]}),local properties=({weblogic.jdbc.jta.DefaultXADataSource=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=AdminServer+192.168.1.120:7001+vhie_domain+t3+, XAResources={WLStore_vhie_domain_VhieFileStore, SDSDataSource_vhie_domain, DefaultXADataSource_vhie_domain, eis/jms/WLSConnectionFactoryJNDIXA, WSATGatewayRM_AdminServer_vhie_domain},NonXAResources={})],CoordinatorURL=AdminServer+192.168.1.120:7001+vhie_domain+t3+): weblogic.transaction.RollbackException: Aborting prepare because the following resources could not be assigned: WLStore_audit_domain__WLS_AuditAdminServer
 at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1881)
 at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:345)
 at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
 at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:625)
 at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:49)
 at weblogic.ejb.container.internal.BaseRemoteObject.__WL_postInvokeTxRetry(BaseRemoteObject.java:444)
 at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:53)
 at gov.va.med.datasharing.core.ServiceBus_r6xnti_ServiceBusImpl.processInbound(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
 at $Proxy89.processInbound(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:317)
 at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
 at $Proxy91.processInbound(Unknown Source)
 at gov.va.med.datasharing.web.ServiceBusDelegate.processInbound(ServiceBusDelegate.java:43)
 at gov.va.med.datasharing.web.adc.PatientServiceImpl.changeADCStatus(PatientServiceImpl.java:58)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.springframework.expression.spel.support.ReflectiveMethodExecutor.execute(ReflectiveMethodExecutor.java:69)
 at org.springframework.expression.spel.ast.MethodReference$MethodValueRef.getValue(MethodReference.java:97)
 at org.springframework.expression.spel.ast.CompoundExpression.getValueInternal(CompoundExpression.java:81)
 at org.springframework.expression.spel.ast.SpelNodeImpl.getTypedValue(SpelNodeImpl.java:102)
 at org.springframework.expression.spel.standard.SpelExpression.getValue(SpelExpression.java:98)
 at org.springframework.binding.expression.spel.SpringELExpression.getValue(SpringELExpression.java:84)
 at org.springframework.webflow.action.EvaluateAction.doExecute(EvaluateAction.java:75)
 at org.springframework.webflow.action.AbstractAction.execute(AbstractAction.java:188)
 at org.springframework.webflow.execution.AnnotatedAction.execute(AnnotatedAction.java:145)
 at org.springframework.webflow.execution.ActionExecutor.execute(ActionExecutor.java:51)
 at org.springframework.webflow.engine.support.ActionTransitionCriteria.test(ActionTransitionCriteria.java:82)
 at org.springframework.webflow.engine.support.TransitionCriteriaChain.test(TransitionCriteriaChain.java:71)
 at org.springframework.webflow.engine.Transition.canExecute(Transition.java:195)
 at org.springframework.webflow.engine.Transition.execute(Transition.java:211)
 at org.springframework.webflow.engine.impl.FlowExecutionImpl.execute(FlowExecutionImpl.java:393)
 at org.springframework.webflow.engine.impl.RequestControlContextImpl.execute(RequestControlContextImpl.java:214)
 at org.springframework.webflow.engine.TransitionableState.handleEvent(TransitionableState.java:119)
 at org.springframework.webflow.engine.Flow.handleEvent(Flow.java:555)
 at org.springframework.webflow.engine.impl.FlowExecutionImpl.handleEvent(FlowExecutionImpl.java:388)
 at org.springframework.webflow.engine.impl.RequestControlContextImpl.handleEvent(RequestControlContextImpl.java:210)
 at org.springframework.webflow.engine.ViewState.handleEvent(ViewState.java:232)
 at org.springframework.webflow.engine.ViewState.resume(ViewState.java:196)
 at org.springframework.webflow.engine.Flow.resume(Flow.java:545)
 at org.springframework.webflow.engine.impl.FlowExecutionImpl.resume(FlowExecutionImpl.java:258)
 at org.springframework.webflow.executor.FlowExecutorImpl.resumeExecution(FlowExecutorImpl.java:169)
 at org.springframework.webflow.mvc.servlet.FlowHandlerAdapter.handle(FlowHandlerAdapter.java:183)
 at org.springframework.webflow.mvc.servlet.FlowController.handleRequest(FlowController.java:174)
 at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:48)
 at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:925)
 at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:856)
 at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:915)
 at org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:822)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
 at org.springframework.web.servlet.FrameworkServlet.service(FrameworkServlet.java:796)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
 at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at org.springframework.orm.jpa.support.OpenEntityManagerInViewFilter.doFilterInternal(OpenEntityManagerInViewFilter.java:180)
 at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:107)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
 at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
 at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
 at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: javax.transaction.SystemException: Aborting prepare because the following resources could not be assigned: WLStore_audit_domain__WLS_AuditAdminServer
 at weblogic.transaction.internal.TransactionImpl.abort(TransactionImpl.java:1153)
 at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(ServerTransactionImpl.java:2200)
 at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:279)
 ... 77 more
.>

It turns out that those packages are, indeed, in extra.
I didn't think to look there, since I assumed that everything needed by base would be in [core].
I assumed wrong.

Need help about setting up a JMS sender channel

I just started to play with PI for a few weeks and I'm trying to setup a simple JMS sender channel to read stuff from a WebSphere MQ.
I've someone installed JMS adaptor for me, but we never know it is correctly installed or not. First question is "Is there any way we can verify JMS adapter is correctly installed or not?"
In the Design: integration builder, I've a very defined a very simple data type(src_dt) which is a string and a message type(src_mt) which uses resp_dt. Finally I created a message interface (test_mia_out) that contains src_mt. At this point of time, I don't need message mapping so I didn't configurate this section.
Then I went to Configuration: Integration builder and created a new communcation channel with the following setting:
Parameter section:
Adapter Type: JMS
Transport Protocol: WebSphereMQ (Non-JMS) <- if i don't use this option, i can't enter MQ connection detail in the Source section.
Message Protocol: JMS 1.x
Adapter Engine: Integration Server
Source section:
QueueConnectionFactory Java Class: com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class: com.ibm.mq.jms.MQQueue
...MQ connection detail...(IP, Port, Queue Manager, Channel and Queue Name )
Transport Protocol: TCP/IP <- this is consists to server side setting
JMS-Compliant: JMS-Compliant
Since I only want a very simple working sample, again I didn't change the content in receiver determination, interface determaintion and sender agreement.
Now when I active this change and I saw the following error in the channel monitor:
Short Log - Channel has internal error
Admin Info - Exception: Channel with Status Unknown or Not Registered
I did stop and start the service, refresh CPA cache and even restart the entire PI server, I always see this message and cannot find any more detail description about what is causing this problem.
My PI Server version is 7.0 and MQ version is 5.3
There's very limited resource about how to setup to read MQ message in PI and I'm stuck now. Therefore, I need a help from some experienced people to tell me if I have did something wrong or missed some steps?
And if possible, could people mind to post a step by step go through how you setup it up?
Edited by: Robert Fu on Jan 10, 2008 6:51 AM

Before you use the JMS, you need to deploy some drivers related to specific MQseries, Kindly ensure that proper driver are deployed....
If you use MQSeries 53x.xxx, you must enter the following JAR files in aii_af_jmsproviderlib.sda.
com.ibm.mq.jar, com.ibm.mqbind.jar, com.ibm.mqjms.jar, connector.jar (use the JAR file from the J2EE client directory)
check this link it will give you more inofmration
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
check this to get the condifuration the JMS
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Ref How To Use the Content Conversion Module in JMS Adapter - https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000582377&

JMS sender communication channel content conversion

Hi,
I struck with the content conversion in the JMS Sender communication channel.
I have configured the communication channel with the filed fixed lengths. (Simple type)
The field fixed lengths i have given are 10,2,3,11
The contents in the file 1000000072 230 111
but, in the input xml after conversion iam getting 100000007 in the first field and 2 in the second field 23 in the third field.
I have configured the sender communication channel as in the document in SDN.
Even, i configured several communication channels. I didn't get this strange error any time.
I have gone through SDN to fix this issue, but i didn't get solution.
If anyone got rectified this kind of error, please answer your solution to me
Thanking you,
Regards,
Krishnaraju.

Hi,
Thanks for all your support. The issue got resolved.
The issue is due to the file, In the file the special characters are appearing. We are not able to see these characters in the notepad, wordpad, text editor.
But, these characters are appearing in th syn text editor. So, we removed those characters and processessed the file. Now, it is successfull.
Regards,
Krishnaraju.

Problem in JMS Sender Adapter

Hi All,
I am trying to Pick two different XML types of Messages from a Single Queue.
For Example :- Despatch Advice and Replishment Proposal.
Queue Name is : - JMS_XI_Sender
SAP XI is not allowing me to create two different sender agreements for the same communication channel.
Service :- BS_JMS
Interface : - Despatch_Advice_OB
CC :- JMS_SENDER
and
Service :- BS_JMS
Interface : - Replishment_Proposal_OB
CC :- JMS_SENDER
Can any one tell how can SAP XI will differentiate these two messages and sends to two different receivers.

Hi Rama,
I am using XML Despatch Advice and Replishment Proposal types .
Basically I do have one sender which will post Two types of XML messages in to one single MQ Queue.
SAP XI/PI has to pick that message and then needs to check what is the Value in the "Message Type" Tag .
I do also have two different Interfaces and Mappings and Two different Receivers.
Depending on the value in Message Type SAP XI/PI has to check for the Particular Interface and Mapping, finally needs post the message to Particular Receiver
You need to have defined two different sender agreements with two different Communication channels.
In the JMS adapter Sender configuration you can mention the Queue name to pick the message . After picking the message the JMS sender adapter need to map it to the correct message type - it is defined by message interface defined in the sender agreement .
Please let us know if you need any further calrification.
Regards,
kishore

JMS sender adapter is not picking up message from MQ

Hi Experts,
I have configured the JMS sender adapter for getting message from Websphere MQ. In RWB the adapter and the communicaiton channel all looking good. The trace file tells me the connection to the queue has been established.
But the problem is this JMS sender adapter is not picking up message from the Queue defined on the MQ site.
Any Idea what could be wrong?
Thanks!
Jason
Jason

Hi,
1) Can you activate the JMS adapter again ( edit save and activate it )
2) Check whether the right Queue is addressed.
Regards
Agasthuri Doss

Content conversion at JMS sender communication channel

Hi friends,
I have to convert fixed length flat structure to xml message.Therefor i have to do content conversion at the JMS sender comm channel.Can someone please explainthe procedure?
data in the queue would be like as follows.
9999000000124646q12233appej500rc11147822zord

Hi Manikandan,
The structure conversion can handle files containing rows with different structures. In
each row there is a key field to identify the structure. The rows with identical key fields of
course have identical structures.
Let us assume that we have a sample file with four rows. Each row has a two-byte key
field; the first row has a second field with ten bytes; the structure of the second and third
rows is the same and comprises two additional fields with three bytes each; the last row
has a second field with five bytes:
AA1234567890
BBABCABC
BBXYZXYZ
CC12345
The configuration for the conversion could look like this:
Module Configuration
Module Key Parameter Name Parameter Value
Plain2XML Transform.Class com.sap.aii.messaging.adapter.Conversion
Plain2XML Transform.ContentType text/xml;charset=utf-8
Plain2XML xml.conversionType StructPlain2XML
Plain2XML xml.processFieldNames fromConfiguration
Plain2XML xml.documentName MyDocument
Plain2XML xml.documentNamespace http://xi.com/test
Plain2XML xml.recordsetName MyRecordset
Plain2XML xml.recordsetStructure NameA,1,NameB,*,NameC,1
Plain2XML xml.keyFieldName MyKey
Plain2XML xml.keyFieldType CaseSensitiveString
Plain2XML xml.NameA.fieldNames MyKey,field-nameA
Plain2XML xml.NameA.fieldFixedLengths 2,10
Plain2XML xml.NameA.keyFieldValue AA
Plain2XML xml.NameB.fieldNames MyKey,field-nameB1,field-nameB2
Plain2XML xml.NameB.fieldFixedLengths 2,3,3
Plain2XML xml.NameB.keyFieldValue BB
Plain2XML xml.NameC.fieldNames MyKey,field-nameC
Plain2XML xml.NameC.fieldFixedLengths 2,5
Plain2XML xml.NameC.keyFieldValue CC
In xml.recordsetStructure, you add a name for each different structure followed by the
number of occurrences or an asterisk for unbounded occurrences. For each structure
name, you configure the structure separately in a separate namespace such as
xml.NameA.fieldNames and so on.
If your source file is a CSV file, replace each xml.XXX.fieldFixedLengths with
xml.XXX.fieldSeparator.
the result of this conversion looks like this:
<ns:MyDocument xmlns:ns="http://xi.com/test">
<MyRecordset>
<NameA>
<MyKey>AA</MyKey>
<field-nameA>1234567890</field-nameA>
</NameA>
<NameB>
<MyKey>BB</MyKey>
<field-nameB1>ABC</field-nameB1>
<field-nameB2>ABC</field-nameB2>
</NameB>
<NameB>
<MyKey>BB</MyKey>
<field-nameB1>XYZ</field-nameB1>
<field-nameB2>XYZ</field-nameB2>
</NameB>
<NameC>
<MyKey>CC</MyKey>
<field-nameC>12345</field-nameC>
</NameC>
</MyRecordset>
</ns:MyDocument>
Regards,
Vinod.

Error in JMS Sender Adpater

Hi
I am doing Weblogic-PI-File scenario
when i try to pick the XML file from Weblogic JMS queues its giving the follwing error
Error occurred while processing message: 552eec87-b6c3-4035-2675-cc3cd57b5487. Detailed error (if any): com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in converting Binary message <?xml version="1.0" encoding="UTF-8"?> <ns0:MT_File_Sender xmlns:ns0="urn:XXXXXXXX.com:JMSReciever"><SalesOrderDetails><MRNNumber>1234</MRNNumber><FirstName>ABC</FirstName><LastName>CDE</LastName><SocialSecurity>1234567890</SocialSecurity></SalesOrderDetails></ns0:MT_File_Sender> to XI message for message: 552eec87-b6c3-4035-2675-cc3cd57b5487: TransportException: No MIME header found
Edited by: S V on Jan 27, 2009 1:08 AM

Hi I am using Weblogic JMS Queues ..
and the connection parameters i am using :
JNDI LOOKUP NAME FOR QUEUE CONNECTION FACTORY:
mm.jms.VendorConnectionFactory
JNDI LOOKUP NAME OF JMS QUEUE: mm.jms.PIOutboundTestQueue
NAME OF JNDI INITIAL CONTEXT: weblogic.jndi.WLInitialContextFactory
JNDI SERVER ADDRESS : t3://vendor.xxx.xxxxxxx.com:6107
JNDI LOGON USER : xxxxxx
JNDI LOGON PWD : XXXXXX
did i miss anything ... or do i have configure anything on JMS sender adpater so that it will convert the text message into Binary

Problem in configuring JMS adapter

Hello,
My purpose is to send xml data from MQSeries to BW using XI. MQSereies is installed in XI server. For thah I am trying to configure JMS adpter for MQSeries in XI. I have successfully deployed the necessary external drivers using SDM. I have configured the sender channel with the following parameters.
Adapter type: JMS
Transport Protocol :WEBsphereMQ(non-JMS)
Message protocol :JMS1.x
Queue connection factory java class:com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class: com.ibm.mq.jms.MQQueue
IP address: IP address of XI system.
Port: 1414
Queue manager name : MQ-manager-name_XI-system-name
Channel Name : reciever-channel-name_XI-system-name
JMS queue: postcard
Charecter set ID:
Transport/networkprotocol: TCP/IP
JMS-Compliant : WebsphereMQ(non-JMS)
But when I check it in adapter monitor JMS is shown as red.
When I go to Visual Administrator
"cluster->server->services->monitoring->runtime->monitor tree->services->Connector Service" is white instead of green.
Can any one tell what could be the problem.
Regards,
Amith

Hi Vijaya,
In VA there is only option to stop or start JMS XI adapter.
I dont know where to activate JMS adapter in VA. It is already started in VA.
Regards,
Amith

JMS sender with MessageTransformBean and xml.additionalLastFields

Hi all,
I have a JMS sender adapter (generic JMS) which I use for this scenario
MQ (JMS) --> PI (7.4 AEX) --> ERP (IDoc)
I am following this page for setting up content conversion for the adapter:
Adapter Engine (Java SE) - SAP Library
If i specify the following parameters...
xml.missingLastFields = Error
xml.additionalLastFields = Error
... the channel goes to error state when it tries to process a shorter / longer message then the configured one.
This of course is expected / wanted behavior. What is not wanted is that the channel does not pick up the message from the JMS queue and then putting it on error state within PI. Instead the message stays in the queue and the channel tries to pick up the message every second or so.
So my question is:
Is there any way to have the channel pick up the message from the queue, then fail on PI and put the message in (system) error state?
(I already tried Transform.PermanentErrors = true but no luck, maybe this only applies to file adapter?)
Thanks and kind regards
Jens

Hi Jens,
AFAIK - there is no standard way in adapter engine to perform this. But you can pick the message a throw the error in transformation step (using mapping).
regards,
Harish

JMS sender adapter setting. Please help!

Hi Experts,
I want to receive 4B2 PIP from BizTalk in PI. Therefore I am configuring Sender JMS communication channel.
I am having couple of doubts here.
1. What happens if "Transactional JMS Session" is checked or selected in processing tab? What happens if it is unchecked?
2. In BizTalk messages are getting queued if there was error in the first message. Actually the error is in the adapter engine because BizTalk has sent a message with wrong schema. So any subsequent message with correct schema is getting queued in BizTalk. What should be done so that correct messages are received in PI? Do I need to change anything in sender JMS communication channel?
Please help!
Thanks
Gopal

Hi Gopal,
1)notes for JMS adapter
Go thru these notes 790963,747601,746393,856346,802754,
837501 and 790224.
2)information regarding use of JMS Adapters,Go thru these links of help.sap.com
JMS Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
Configuring the Sender JMS Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
Configuring the Receiver JMS Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
JMS-Provider-Specific Settings:
http://help.sap.com/saphelp_nw04/helpdata/en/c1/739c4186c2a409e10000000a155106/content.htm
And to deploy the jars which are given in the JMS Adapter link go thru this article "How To Install and Configure External Drivers for JDBC and JMS Adapters"
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.doc
http://wiki.sdn.sap.com/wiki/display/XI/FAQ+J2EEJMS+Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/frameset.htm
/people/kan.th/blog/2007/02/05/exploring-jms-and-sap-xi-jms-adaper
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/frameset.htm
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D44%26threadID%3D52011%26messageID%3D535575%23535575
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D44%26threadID%3D46150%26messageID%3D466488%23466488
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Thanks
Ravi

JMS Sender adapter Problem

Hi All,
I have posted this question earlier too. But did not get a proper answer.
I am using JMS adapter to fetch data from MQ.
My input data is: AA123BB45678AA345BB78564.
It is just reading the first segment i.e.AA123 and not reading the remaining.
How can I configure my JMS adapter to pick this pattern of data? It works fine if I have line break after each record that is if the input is as below.
AA123
BB45678
AA345
BB78564
In the above there is a Line break after each segment. So JMS adapter picks it fine.
I have also tried using xml.A.endSeparator equals to blank in the module configuration. But it does not work either.
Can anyone throw some light to this?
Thanks
Abinash

Ok If I had to configure the sender File adapter to read the above mentioned input data how can I do it.
AA123BB45678AA345BB78564.
I don't have any line breaks between segments.
I want it to read it as following
<Src_MT>
<SRC>
<A>
<A1>AA</A1>
<A2>123</A2>
</A>

<B1>BB</B1>
<B2>45678</B2>

</SRC>
So on.
What value should I have in xml.A.endSepartor and xml.endSeparator to make the above case work?
Thanks
Abinash

Configuring JMS Sender

Similar Messages

Maybe you are looking for