Need help about setting up a JMS sender channel

I just started to play with PI for a few weeks and I'm trying to setup a simple JMS sender channel to read stuff from a WebSphere MQ.
I've someone installed JMS adaptor for me, but we never know it is correctly installed or not. First question is "Is there any way we can verify JMS adapter is correctly installed or not?"
In the Design: integration builder, I've a very defined a very simple data type(src_dt) which is a string and a message type(src_mt) which uses resp_dt. Finally I created a message interface (test_mia_out) that contains src_mt. At this point of time, I don't need message mapping so I didn't configurate this section.
Then I went to Configuration: Integration builder and created a new communcation channel with the following setting:
Parameter section:
Adapter Type: JMS
Transport Protocol: WebSphereMQ (Non-JMS) <- if i don't use this option, i can't enter MQ connection detail in the Source section.
Message Protocol: JMS 1.x
Adapter Engine: Integration Server
Source section:
QueueConnectionFactory Java Class: com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class: com.ibm.mq.jms.MQQueue
...MQ connection detail...(IP, Port, Queue Manager, Channel and Queue Name )
Transport Protocol: TCP/IP <- this is consists to server side setting
JMS-Compliant: JMS-Compliant
Since I only want a very simple working sample, again I didn't change the content in receiver determination, interface determaintion and sender agreement.
Now when I active this change and I saw the following error in the channel monitor:
Short Log - Channel has internal error
Admin Info - Exception: Channel with Status Unknown or Not Registered
I did stop and start the service, refresh CPA cache and even restart the entire PI server, I always see this message and cannot find any more detail description about what is causing this problem.
My PI Server version is 7.0 and MQ version is 5.3
There's very limited resource about how to setup to read MQ message in PI and I'm stuck now. Therefore, I need a help from some experienced people to tell me if I have did something wrong or missed some steps?
And if possible, could people mind to post a step by step go through how you setup it up?
Edited by: Robert Fu on Jan 10, 2008 6:51 AM

Before you use the JMS, you need to deploy some drivers related to specific MQseries, Kindly ensure that proper driver are deployed....
If you use MQSeries 53x.xxx, you must enter the following JAR files in aii_af_jmsproviderlib.sda.
com.ibm.mq.jar, com.ibm.mqbind.jar, com.ibm.mqjms.jar, connector.jar (use the JAR file from the J2EE client directory)
check this link it will give you more inofmration
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
check this to get the condifuration the JMS
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Ref How To Use the Content Conversion Module in JMS Adapter - https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000582377&

Similar Messages

Need help about setting timeout webservice client.

Hi,
I trying to set timeout before make call to the webservices, my target webservice is deployed on WebLgic server 8.14 (service pack 4). Nothing just Thread.sleep for 1 min. then return some string. Here is my client code. I use the proxy generated by the workshop testing browser, "Java proxy" button.
public static void main(String a[]) {
try {
EjbTimeout_Impl proxy = new EjbTimeout_Impl();
EjbTimeoutSoap_Stub myStub = (EjbTimeoutSoap_Stub)proxy.getEjbTimeoutSoap();
BindingInfo bInfo = (BindingInfo)myStub._getProperty("weblogic.webservice.bindinginfo");
System.out.println(bInfo.getTimeout()); // print out '-1' no timeout I guess
bInfo.setTimeout(5); //secs
System.out.println(bInfo.getTimeout()); // print out '5', value change accepted
myStub._setProperty("weblogic.webservice.rpc.timeoutsecs", "5");
System.out.println(myStub._getProperty
("weblogic.webservice.rpc.timeoutsecs")); // also print '5'
String ss = myStub.sayHello("WEBLOGIC");
System.out.println(ss);
} catch (Exception e) {
System.out.println(e.toString());
As you see the timeout value is changed but when I call webservice from this client everything is fine. The output string ruturn from webservice is printed out after Thread.sleep(60000).
Are there any missing things about this client code, my webservice code is quite simple, or if there is some way else to achieve this ???
Many thanks.

Before you use the JMS, you need to deploy some drivers related to specific MQseries, Kindly ensure that proper driver are deployed....
If you use MQSeries 53x.xxx, you must enter the following JAR files in aii_af_jmsproviderlib.sda.
com.ibm.mq.jar, com.ibm.mqbind.jar, com.ibm.mqjms.jar, connector.jar (use the JAR file from the J2EE client directory)
check this link it will give you more inofmration
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
check this to get the condifuration the JMS
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Ref How To Use the Content Conversion Module in JMS Adapter - https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000582377&

Need help w/ setting up ports to run a server for America's Army

Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
Q: How do I run my own server?
A: Quick and dirty server info:
1. Edit RunServer.bat to change the map.
2. Run RunServer.bat
Or:
server.exe LAN MAPNAME.aao (Host a LAN game)
server.exe global MAPNAME.aao (Host a Public game)
Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
[Engine.GameEngine]
ServerActors=Andromeda.AndromedaMBS
[Andromeda.Andromeda]
GameServerIp=
Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
[Andromeda.AndromedaMBS]
QueryPort=20025
Punkbuster user fix correction.
If [Engine.GameEngine] block has been changed to read as below:
[Engine.GameEngine]
ServerActors=IPDrv.AndromedaMBS
Please add the following block to your INI file:
[IpDrv.AndromedaMBS]
QueryPort=20025
(Last Updated: 2006-04-20)

Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

I need help in setting up a wireless connection

I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMay

NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99

Need help about Hidden Markov Model model

I want to make classification for EEG signal using Hidden Markov Model
algorithm based on neural network.
plz need help about how to implement this algorithm using LABVIEW.
if not I want another thing to make classification.
any one know information about this topic, send me a reply
thanks

Have you derrived the HMM that you want to implement?
If so, post the algorithm and we can provide comments on how to implement it using LabVIEW.
Message Edited by Ray.R on 04-12-2010 12:54 PM

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with my Ipad,

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with Ipad, and Iphone as well
I think my wireless rooter's setting has some problem but cannot found anything to solve,
I can watch if there is another wireless network , I tried this option in another place who has wireless network and I can watch.
Do you have any idea to do these setting , I dont have any problem when Ipad has 6.1.3 IOS,
need help
thanks

Thanks
I will and share the result.

Will someone please help me set-up Acrobat to send a PDF via webmail? Acrobat returns a message "Server Connection Error .... Port 143 unavailable"

Will someone please help me set-up Acrobat to send a PDF via webmail? Acrobat returns a message "Server Connection Error .... Port 143 unavailable"

Are you using a Microsoft or Apache web server? If so, you can submit to a server-side script, which will bypass web mail and client-side email software such as OUTLOOK.
For examples:
http://www.nk-inc.com/software/pdfemail.net/examples/

Downloaded Epsom printer app need help to set printer up on iPad 3

Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

It's Epson, not epsom. Epsom refers to epsom salt (magnesium sulfate).
... Anyway, iPads don't have printers directly set up. You might interface with a printer over a WiFi. That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

Need help about ref cursor using like table

Hi Guys...
I am devloping package function And i need help about cursor
One of my function return sys_refcursor. And the return cursor need to be
join another table in database . I don't have to fetch all rows in cursor
All i need to join ref cursor and another table in sql clause
like below
select a.aa , b.cc form ( ref_cursor ) A, table B
where A.dd = B.dd
I appeciate it in advance

My understanding is that you have a function that returns a refcursor and is called by a java app.
Because this is a commonly used bit of code, you also want to reuse this cursor in other bits of sql and so you want to include it like table in a bit of sql and join that refcursor to other tables.
It's not as easy as you might hope but you can probably achieve this with pipelined functions.
Is it a direction that code should be going down? yes, eventually. I like the idea of pulling commonly used bits of code into a SQL statement especially into the WITH section, provided it could be used efficiently by the CBO.
Is it worth the effort given what you have to do currently to implement it? possibly not.
what else could you do? construct the sql statement independently of the thing that used it and reuse that sql statement rather than the refcursor it returns?
Message was edited by:
dombrooks

Need help about boot SUNFIRE V120

Hi all....
I need help about how to change boot from boot net to boot disk....
after i installed sun solaris 10 at my sunfire v120, then reboot the machine ... this sunfire still boot from net not from disk...
can i change it?
please i really need help ....
thanks

If its booted, try "eeprom boot-device=disk"
If your at the OBP, "setenv boot-device disk".
If that doesnt work check the value of "diag-switch?".
It could be booting off the the diag-device instead

Need Help about 3D and revolving in illustrator

I really need help about 3D, Please tell me that How i create 3D in illustrator
i want to revolve text or shape around any object like this, any plugin? or other software required for this?
if somebody know this it will be really help full
   http://rcgrafix.fizwig.com/1452732-large.jpg
   http://rcgrafix.fizwig.com/1384370-large.jpg
   http://rcgrafix.fizwig.com/1062180-large.jpg
Thanks
Arsi

if links are not working try Copy and paste it in to your browser address bar
thank you

Need help about the SHA Message Digest ? & what is use of Message Diagest ?

need help about the SHA Message Digest ? & what is use of Message Diagest ?
1>i have one program of making message digest
2>which requires two files name
3>one for input like txt
4> second is out put file of message digest
can any one tell what is the use of second generated file .

MessageDigest md = MessageDigest.getInstance("SHA");
FileInputStream fis = new FileInputStream(args[0]);
byte[] b = new byte[1024];
int readed = -1;
while((readed = fis.read(b)) > 0)
     md.update(b, 0, readed);
fis.close();
FileOutputStream fos = new FileOutputStream(args[1]);
byte[] d = md.digest();
StringBuffer sb = new StringBuffer();
for(int i = 0; i < d.length; i++) {
     String str = Integer.toHexString(d[i] & 0xff);
     sb.append(str.length() < 2 ? "0" + str : str);
fos.write(sb.toString().getBytes());
fos.close();

Need help about 1015

need help about 1015 it says connect iphone to itunes on screen i did it but it doesnt work and says unexpected 1015

Try restoring it: Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
If you have backed up the iPhone in the past, select the device in iTunes and choose "restore from backup".

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

Need help to set up my exsisting paypal account

need help to set up my exsisting paypal account

Did you have a look at the document listed here
http://forums.adobe.com/community/formscentral/payments?view=documents
Gen

Need help about setting up a JMS sender channel

Similar Messages

Maybe you are looking for