Configuring Quick Search in Recruiter Work Center HCM_ERC_CI_2

Greetings,
I am trying to configure the quick search in the recruiter work center for business function HCM_ERC_CI_2. I don't seem to be picking up candidates, requisitions or postings correctly. For example, I search for "test". I know that I have requisitions and postings that contain the word "test" in the title but I don't get any of those in the search results. I've tried playing around with the V77RCF_SMG_NAVI settings and it doesn't seem to help.
This is how I have things configured as of right now:
V_T77RCF_SRCH_C   quicksearch, enable ranking , display max hits 50, display threshold 50.00
V77RCF_SMG_NAVI   quicksearch, 22, Fast Search
V_T77RCF_SMG_ASM   1,96, Fast Search
V_T77RCF_SM_ASME   no entries (all entries are related to candidate information?)
Can some please advise how the quick search should be configured?
Thanks,
Laura

I assume that I am missing a piece of key configuration in the search profile or search templates.
In V_T77RCF_SMASK, entry 96 Fast Search is of type Full Text and the search profile is INT_CAND. This leads me to believe that only candidate data is being searched. However, when I tried to change it to ERC_REQ I am still getting only candidates.
I have tried the various reports COM_SE_SEARCH_TEST, COM_SE_SEARCH_IIF_TEST, COM_SE_SEARCH_ATTRIBUTES and I don't understand how to interpret them.

Similar Messages

E72 - Contacts quick search doesn't work correctly

Hello!
I have over 1,500 contacts in Outlook and has successfully synchronized them with Nokia E72 (last firmware). But quick search in Contacts application simply doesn't work - I can find only few contacts - others just dissapear when I start typing correct letters.
I tried to kill the process of this app and restart Contacts. Voila, it works correctly! But then in 5 min. I tried again and got just the same problem.
Desktop quick search doesn't work too.
I've already tried to reload all the contacts in my phone - no results.
What would you advise to solve that problem?
Thanks in advance.

The E72 Is from the most point of views a complete and very good phone.
But this bug drives me crazy!
Zam72 is completely spot on: Pathetic, Killer Feature, frustrating.
I've done som more testing:
Started with a quick search from home screen, found the contact I was lookng for.
Made a Mail for exchange sync. Same search, no hits. (thought I found the issue...)
Reboot, speed search work again.
New Mfe sync, search still works, repeated a couple of times, still ok.
Two hours later: Search still works
New mfe sync, search once again goes blank!
Now i'm noticing that when I open the contacts, I can browse the contacts, but if i enter a letter it first appears, but directly disapears making search impossible.
I'M NOT ABLE TO USE THIS PHONES CONTACTS!!!!!!
I believe this is related to Mfe synchronizations, but it's a random issue.
Yes, I've tried a *#7370# with no luck.
I'm not using PC-suite sync at all (no conflicts)
I'm not running other programs simultaniously.
I feel like a Beta tester!

Solved: Quick search does not work with FF4

[https://docs.google.com/leaf?id=0B1WuaaPz4AKtMDk1MDA2ODktN2NlYy00NTg2LWJmOGUtNDI3ODdiYzQzODli&hl=en failed quick search example]
As you can see from the image above, I have a quick search defined for 'am' which is set as a 'keyword' for an Amazon.com search. When I type the keyword followed by a search term it it displays an error page with a path to some resource in a .jar file.
Note the save URL does not include a %s. It used the previously document behavior of having any text that followed the keyword appended to the keyword URL.
When I add the %s to the end of the saved quick search URL, the quick search works correctly. This change confused me for a while until I dug into it and now I need to check and update all of my quick searches. :-(

Hi qzy,
When you enable anonymous access in SharePoint, did you want the anonymous user have the permission
to access the site content such as library or just need them to be capable to search? You may need to check your configurations according to the document below based on your requirement.
http://technet.microsoft.com/en-us/library/cc263363.aspx
When you enable search for anonymous user for the site collection, is it a team site or publishing
site? By default team sites are designed for intranet site so search on Team Site with default value will be prompted for
credentials because “OSSSearchResults.aspx” page is configued to publish results based on “LayoutsPageBaseClass(Microsoft.SharePoint.WebControls)” class. The LayoutsPageBase Class Represents an application page (sometimes
called a "_layouts" page). If you want to do that in team site, you need to remove the “LayoutsPageBase Class(Microsoft.SharePoint.WebControls)” from “OSSSearchResults.aspx” page, which is not a recommended way.
Publising Sites are desinged for internet site so “Search/Results.aspx”
is configured in a way where it can deliver search results for
anonymous users. If in your scenario it’s for publishing site, you need to ensure that the content which should appear in the search result is visible for anonymous user. (Follow the “Enable anonymous access for individual lists”
part in the link above)
You can also create a search center to see if the user can get search result there. Regarding the
second issue, you need to check the crawl logs and ULS logs to find the clue.
For more information, please refer to:
http://blogs.devhorizon.com/reza/?p=498
Hope this helps.
Lu Zou

Account and contact person search in more Work Center pages

Hi All,
I have to face the following problem. Currently I am at customer and the customer wants to have four different work centers (broker, cedent, original insured). The work center pages should show the AB SEARCH. In those ABs the links Search Brokers, Search Broker Contacts; Serach Cedent, Search Cedent Contacts etc.)
I Use the Target IDs MD-BP-SR and MD-CONP-SR for all searches.
Everything went fine (I checked simultanously in WebUI). After I entered the third ORIGINAL INSURED the AB of all Work Center appeared the same. All had Cedent Accounts, Cedent Contact Person as links in the AB Create. When I make the Cedent links unvisible no Work Center has them in.
How can I solve this problem? I work on that since two days. Has anyone an idea? Even here in SDN I couldn´t find a solution for that.
The CRM is a brandnew one? Could it be that the search MD-BP-SR can only be used in one workcenter??
Thanks to all for your help,
Martin

Hi Pieter,
thx for your answer. AB=Assignment Block. This Search Block.
I would like to have 4 WC for Cedent, Broker, Original Insured an Prospect (XXX). These WC should have all an AB / Work Center Link Group that includes Search XXX Accounts and Search XXX Contacts. I have an developer here, that would add the role, so that we can search role specific (Roles: Broker Original Insured, Broker etc.). An better idea for that?
But my problem is, that the WC pages look all the same. Even if I go to WC Prospect, that should incl. the Work Center Linkgroup Create (Link will be Create Prospect) it doesn´t appear, because all work center pages look similar.
I entered all (LogLingID, WC Link Groups etc.) from scratch, but I compared with standard.
I would love to help, but it is not really clear to me what you are doing.
You mention you have 4 workcenters, all with an option to search for accounts and a search for contacts.
CORRECT.
How are you planning to differentiate between them all if you use the same target id's (MD-BP-SR and MD-CONP-SR)?
Is your issue that you changed the description of the links, and they appear the same?
You also mention 'AB'. What would that be?
Yes. The Links all have Search Cedent Accounts in every WC Link Group. But why?
Regards Martin
I would upload a screenshot or send it, but don´t know how...first time posting a thread.

E-recruitment: Work Center - Recruiter

Error: If an attachment type - Active queries are not getting refreshed immediately upon using the refresh option. ex - If a requisition is created and saved in draft mode. 'My Draft Requisition's is not getting updated immediately. Instead it gets updated on switching between queries.
Version - E-rec 604 support pack 5. Webdynpro Interface, seperate front end and back end - candidate Scenerios #3 as per Note 1017866.
Request e-rec Pro's to post the solution, if they have faced this issue in there e-rec implementation exp.
Thanks & Regards,
David.

Hi,
do you call the application from Portal? Refreshing POWLs after actions is implemented just when using Portal.
Best regards
Sebastian

Work Center sub items postition change

Hi ,
I am new to CRM. Got a requirement to change the positionof the Work Center sub items.
I could able to change the main work center positons (Using t.code crmc_ui_nblinks) .whereas for the sub items, i do not know where to go & change the positions. Appreciate anyone's help.
Thanks
Sekaran

Hi,
Each work center internally contains no of groups, each group contains no of logical links ( sub levels ).
First we need to give position for groups. ex. search, creates are groups -> we can enter positions for this in the same trx crmc_ui_nblinks .. click on the workcenter and search for ur work center and select it . Click on second level navigation and change the position.
For changing the position for logical link:
go to the Define Work Center Link Groups and search for your group id and click on the second level navigation. Here you can change the position for the logical link ( sub items ).
Hope it helps.
Regards,
Sandeep Kumar B

Cost Center and G/L account search help not working

Hi Gurus,
I am facing a problem with the search help button for cost assignment in Shop screen.
When I press the search button for cost center, there is no new screen coming up asking me the search criteria to be given as input. Same is the problem when I search for G/L accounts.
I have defined the backend RFC user as dialog user and also defined the RFC(dialog) in the SRM system for the backend RFC.
My user id has authorization object M_BBP_SHLP in my profile.
What may be the reason for this issue?
Note: I am currently using SRM5.0 system with backend R/3 4.7 version. This SRM system is already connected to another backend system ECC6.0, and the search help is working fine for those users.
Pls. guide me on how to resolve this issue.
Regds,
Ancy

Hi Ancy,
Don't give wild search. Give some words following with * like "UK*" lists all the UK Cost centers. For the G/L accounts: G/L Accounts will get updated in the SC automatically depend upon the product category what you have selected.
Check the configuration Cross Application Basic settings->Account Assignment ->Define G/L Account for the product category.
If you have maintained the configuration for the paritcular G/L Account and Product cateogyr then when G/L Account is updated automatically in the SC (Depend upon this configuration)
Kind Regards
Sameer

Assigned To column not working in the quick search of a list

Hi, I have a list where we have a column called Assigned To, but it is a single line of text column type. Search is working since I am able to find other values in the list.
Now, when using the quick search, it is not working or showing results in this column.
Could this be related that this column is a manage metadata column type as default in SharePoint?
I have created a new list with this value but, as person column type and it is not working either.
Any ideas?

Hi Javi,
Please check and make sure your custom "Managed Property" map to the crowed property generated by managed metadata column, and set the manged property as "Searchable" then start an incremental crawl or full crawl.
For "Assigned To" column(e.g. crawled property should be "ows_Assigned_x0020_To"), I enabled the "Searchable" option for the manged property, then start an incremental crawl, and then search the
user in "Find an item" and it worked, you can try.
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

What is formula key in work center, how to configure it urgent plzzzzzzzzzz

iam trying to create work center. in costing tab of work center it is asking me to enter formula key. what is formula key. how to configure it. plz explain me
thanks,
monica

Hi,
Formula key is used for calculating the execution time of an activity or for calculating capacity requirements or for calculating costs of a work center's activity type. It can be configured in transaction code OP54.
What is the activity type description you are using?
Thanks
Murali.

Configuring Acrobat 7.x to work with the Document Center

This post is in response to a request that one of the forum members made directly to get additional information about how to configure Acrobat 7.x to use the Document Center. The detailed configuration instructions are available in the Desktop Configuration section of the Adobe Document Center Help. Below are the steps:
To configure Acrobat 7.x to use the Document Center follow the steps below:
1. Click
https://dc.adobe.com/adc/fdf/ConfigureAcrobat.fdf to download the file and begin the configuration process.
2. You may be required to login to the Adobe Document Center before you can download the file.
3. After the file has downloaded, Acrobat will automatically launch and the Data Exchange File - Import dialog box for Adobe Policy Server appears.
Note: If you do not see this dialog box , make sure that it is not hidden behind other open windows on your screen.
4. Click Log In, and then type your Adobe ID and Password.
5. Click Import.
6. Follow the instructions in the dialog boxes to confirm the configuration for the Adobe Document Center.
Once the configuration workflow completes you can apply policies defined in the Adobe Document Center to PDF files using Acrobat 7.x.
If you have any question please do not hesitate to contact us.
-- Adobe Document Center Team

Thanks for post
h
e
l
l
o

Regarding work center configuration.

Hi PP Gurus,
We need to take an account to Rated Line Speed (Bottles per minute) (i.e. It should be the current capacity of the bottling line operating at the full rated speed, irrespective of the bottling format).
We're using Discrete Manufacturing scenario and work center (CR01). How could it be taken into account.
Is there any alternte way to put an additional fiueld in work center create (CR01)/work center change (CR02) transaction code?
Thanks & Regards,
Abu Arbab
Edited by: abu arbaba on Jan 30, 2009 9:46 AM

hi,
What I mentioned is , create a reference operation set of one operation with that particular work center and maintain operation times as the speed of that line ( 100 bottles for minute should be entered as base qty as 100 and time as 1 min). Call this reference operation set in any routings that uses this line.
If you do this, you don't need additional field in work center and so don't get confused with it.
cheers
Rav

Message no. IW056 Work center change -- default data redefined

Hi,
After EHP5 Upgrade. I am getting Message no. IW056 Work center change --> default data redefined during Maintenance Order Change (IW32). Please suggest me Is their any SAP Note or any Configuration setting to fix it.
Regards
Maheboob
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics
Edited by: Paul Meehan on Oct 25, 2011 11:56 AM

Hi Maheboob
Im glad the note worked -
To find the note , you could do a note search on the message IW056 you received and the support pack level you are on ..
For EHP5 the note is valid up to SAPKH60504.
The IW056 is listed as a keyword so if you search on it the note should be returned.
Thanks-
Enda.

Search Help for Cost center

Hi All,
I have 2 questions
1) we dont have any default cost center maintained any where in the org-structure (PPOMA_BBP), howeverwhenever I go for shopping I can see a cost center along with GL account, ( I know GL acct is coming from "determine GL account for prod-cat" settings in IMG), but what about cost center where is it coming from ??
2) second, when we do search help for cost center's in shopping application, we are able to see all cost centers from the back end which I guess is good, but we can see even those cost centers which are blocked!!!, why is this happening ??,
Thanks.

Hello,
For First::
In general the CO Area (here: cost center) is derived from R/3 Backend Enterprise
Structure and should be re-determined if another acc. objects is
entered that belongs to a different CO Area. Please also check the
settings in R/3 Backend IMG, path:
->Enterprise Structure ->Assignment ->Controlling
->Assign company code to controlling area
The company code is assigned to the CO Area through the following
assignment:
->Materials Management
->Assign purchasing organization to company code
The CO Area is in general the organizational object in
highest (CO) level. Assignments to other MM/CO objects are located
in lower Enterprise hierarchy level. Hence, the CO Area does not
change if a different CO object of a lower level (here: cost center)
is assigned to a SRM document.
For Second::
The only possibility I see is to set the message to error message in
the customizing in the backend. The message number is KI 170. When you
look at the long text of this message in transaction SE91 in the
backend, you will find the description where to look in the customizing.
When you have set this message to ERROR, then no purchase order will be
created in the backend. Instead the shopping basket gets the status
'ERROR' and the administrator will recieve a work item in his inbox.
Then he can check the backend and either post the purchase orders again
after solving the problem, or he can delete the shopping baskets.
Please check the note for more infos or the documentation.
Setting the message KI 170 to error message will solve your problem.
See note 333136. I would think that if you create
a PO directly in the backend if you do not have the message configured
as and error you will be able to create the PO.
I hope this information helps.
Kind regards,
Gaurav

Fields for Super BOM, Work Center & Super Routing for Variant Config

hi! gurus,
Please can you give me mandatory fields & values for Super BOM, Work Center & Super Routing for Variant Config
thank you

Hi,
In the Super BOM you need to maintain the object dependencies.
Workcenter fields are as usual for other production processes.
Also you can use search option in the forum to view the threads posted in the past. There are many posts related to variant configuration.
Regards,
Senthilkumar

Candidate search in recruiter link (E-Recruitment)

Dear friends,
i have a issue in E-Recruitment that when the recruiter goes for search for a candidate to assign it to the requisition, there is no records in the result.
candidate search is not working Kindly help me out . is there anything needs to be configured
Regards
Narayanan

Hi,
Kindly check for this setting in table : V77RCF_SPT_AATYP
Assign Attachment Types to a Search Profile Type
Use
In this IMG activity, you determine for each search profile type which attachment types should be taken into account during the full text search. The full text search is only meaningful for attachment types that have already been assigned to the object type of the search profile type.
Requirements
You have defined the attachment types in which you want to perform the full text search.
You have defined search profile types and assigned them to object types.
In the IMG activity Define Use of Attachment Types, you have assigned attachment types to the object types that are assigned to the search profile types.
If this resolves your querie, then award with points.
All the best,
Santosh

Configuring Quick Search in Recruiter Work Center HCM_ERC_CI_2

Similar Messages

Maybe you are looking for