Configuring script for lt42

Hi,
I am able to print pickslips for single TO's by configuring a customized script in OMLV for warehouse which is compatible with standard print program RLVSDR40.
But when i try printing multiple TO's from LT42 which uses standard print program RLKOMM40 it doesnot pick the form configured in omlv for the warehouse rather it takes up the standard Print layout.
Can anyone tell me how do I configure the customized script for LT42??

Hi,
Try to configure Script in OMNU transaction code..i am not sure it is working or not...But OMNU also using to configure Scripts and Print programs for TO's.

Similar Messages

Need help with configure script for audacious plugin

Hello. I have written a small plugin for audacious, that uses an Amarok script to retrieve song lyrics and displays them in a window. I'd like to make an AUR package of it, but I don't even know how to write a configure script. I used to compile it with audacious-plugins, but I suppose a package with all audacious plugins plus my own would be sort of a duplicate of the vanilla audacious-plugins.
Can anyone help me?

btn1.addEventListener(MouseEvent.CLICK,f1):
function f1(e:MouseEvent){
nextFrame();
btn2.addEventListener(MouseEvent.CLICK,f2):
function f2(e:MouseEvent){
prevFrame();

Help me making a deamon script for a specific eth0 configuration

hi
my idea is to have a daemon script for configuring my eth0 device with specific settings to connect to my xbox.
i"ve got no idea on how to wirite a daemon script, so i hope to get some help from the community
eth0 sould have:
192.168.1.33 as ip
255.255.255.0 as netmask
192.168.1.1.55 as gateway

kriz wrote:
i k'no its possible with network deamon, but its a great investement to uncomment everytime my rc.conf, then /etc/rc.d/network start...
i"m using by default my wireless to connect to internet
don't want to use netcfg. want something like wpa_auto does for wireless conectons, just for eth0 specific settings
You need to uncomment it once and set the correct values. That's it.

Configuration of zprintprogram and z script for F-58

hi
i have created zprintprogram and z script for F-58
then how i can configure this
regards

Hi ,
check in SPRO
search for Payment method in SPRO , or check table T042Z
regards
Prabhu

Here are scripts for getting OAS302 working on RedHat 6.0

People have said this doesn't work. It works. It's just the
owsctl that doesn't work. I'm not saying that oas302 on RedHat 6
is the best solution anyone could come up with, but it does work,
and if you want to do it, here are some scripts that you can feel
free to modify and use as you wish. Various variables should be
updated with however you system is configured. Remember to start
the wrb (i.e. the second script) before you start any listeners.
Linux has a tendency to crash if you don't kill -KILL all the wrb
processes at the same time (i.e. the kernel gets an uncaught
exception and dies).
Erik
<disclaimer>
I do not guarantee these will work. I do not guarantee that
they will not destroy something important. I assume no liability
for what these scripts may or may not do. Use them at your own
risk. There is no expressed or implied waranty.
</disclaimer>
#!/bin/ksh
# Script to start the oraweb http servers to listen for requests
# because owsctl is kind of unpredictable under RedHat 6.0
# set this variable to be the directory that the webserver
# configuration drivetoryies are under (i.e.
# /db/app/oracle/admin/ows/web/httpd_my.host.com)
WEB_HOME=/db/app/oracle/admin/ows/web/httpd_my.host.com
LISTENER="$2"
if [[ -z "$LISTENER" ]]
then
echo "No listener name to start."
echo "Usage: listen {start|stop} listener"
echo "e.g.:"
echo " listen start admin"
exit 1
fi
case "$1" in
start)
OMN_ADDR=UDP:worf.gcg.com:2649
OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
OWS_ORAWEB_FREEDOMX=1
export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FEEDOMX
CFG_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.cfg
if [[ -f "$CFG_FILE" ]]
then
oraweb -C $CFG_FILE
else
echo "Could not find config file for $LISTENER:"
echo " $CFG_FILE"
exit 1
fi
stop)
PID_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.pid
if [[ -f $PID_FILE ]]
then
kill `cat $PID_FILE`
if [[ $? -ne 0 ]]
then
echo "Could not stop oraweb $LISTENER process."
exit 1
fi
else
echo "Could not find oraweb $LISTENER PID file:"
echo " $PID_FILE"
exit 1
fi
echo "Usage: listen {start|stop} listener"
echo "e.g.:"
echo " listen start admin"
exit 1
esac
#!/bin/ksh
# Script to start up the Oracle Web Request Broker (wrb)
# processes manually because owsctl doesn't work on RedHat
# Linux 6.0
TMP_FILE=/tmp/wrb.pids
case "$1" in
start)
SLEEP=3
if [[ -f "$TMP_FILE" ]]
then
echo "$TMP_FILE exits. Make sure the wrb is not
already"
echo "running, remove $TMP_FILE, and run this script
again."
exit 1
fi
if [[ -z "$ORAWEB_HOME" ]]
then
echo "ORAWEB_HOME is not set. This environment variable"
echo "should be set to the directory where the oracle was"
echo "lives, i.e. /app/oracle/product/8.0.5/ows/3.0"
exit 1
fi
OMN_ADDR=UDP:my.host.com:2649
OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
OWS_ORAWEB_FEEDOMX=1 # I have no idea what this does; I read
# about it in a newsgroup. Supposedly
# it makes the oas run faster
export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FREEDOMX
PATH=$ORAWEB_HOME/bin:$PATH
mnaddrsrv -D &
echo -n "$! " > $TMP_FILE
sleep $SLEEP
mnrpcnmsrv &
echo -n "$! " >> $TMP_FILE
mnorbsrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbcfg &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrblog &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbasrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbahsrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbroker &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbvpm &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbfac &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbdm &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
stop)
kill -KILL `cat $TMP_FILE`
if [[ $? -ne 0 ]]
then
echo "Could not stop wrb processes. The PIDs are in"
echo "$TMP_FILE. If these are running, please"
echo "stop them manually."
else
rm -rf $TMP_FILE
fi
echo "Usage: wrb {start|stop}"
exit 1
esac
null

Hi Erick,
Your scripts for running the OAS302 on 6.0 linux had been very
helpful.
In fact, I dont know what would I have done without them.
Now I am able to run the listeners and even able to create the
packages and users in the database via the OAS 3.0.2 but the
problem starts when accessing a procedure in the database using
the pl/sql agent. By the way i am using Oracle 8.0.5.1 RDBMS and
its home is different than the webserver home.
The browser just does nothing and even does not log any error
message ,I have to stop it after a while but all my other
catridges are working.
any insight will be appreciated.
thanks,
Vikram ( Ironically enough I work for Oracle).
Erik Nielsen (guest) wrote:
: People have said this doesn't work. It works. It's just the
: owsctl that doesn't work. I'm not saying that oas302 on RedHat
6
: is the best solution anyone could come up with, but it does
work,
: and if you want to do it, here are some scripts that you can
feel
: free to modify and use as you wish. Various variables should
be
: updated with however you system is configured. Remember to
start
: the wrb (i.e. the second script) before you start any
listeners.
: Linux has a tendency to crash if you don't kill -KILL all the
wrb
: processes at the same time (i.e. the kernel gets an uncaught
: exception and dies).
: Erik
: <disclaimer>
: I do not guarantee these will work. I do not guarantee that
: they will not destroy something important. I assume no
liability
: for what these scripts may or may not do. Use them at your own
: risk. There is no expressed or implied waranty.
: </disclaimer>
: #!/bin/ksh
: # Script to start the oraweb http servers to listen for
requests
: # because owsctl is kind of unpredictable under RedHat 6.0
: # set this variable to be the directory that the webserver
: # configuration drivetoryies are under (i.e.
: # /db/app/oracle/admin/ows/web/httpd_my.host.com)
: WEB_HOME=/db/app/oracle/admin/ows/web/httpd_my.host.com
: LISTENER="$2"
: if [[ -z "$LISTENER" ]]
: then
: echo "No listener name to start."
: echo "Usage: listen {start|stop} listener"
: echo "e.g.:"
: echo " listen start admin"
: exit 1
: fi
: case "$1" in
: start)
: OMN_ADDR=UDP:worf.gcg.com:2649
: OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
: OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
: OWS_ORAWEB_FREEDOMX=1
: export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FEEDOMX
: CFG_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.cfg
: if [[ -f "$CFG_FILE" ]]
: then
: oraweb -C $CFG_FILE
: else
: echo "Could not find config file for $LISTENER:"
: echo " $CFG_FILE"
: exit 1
: fi
: stop)
: PID_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.pid
: if [[ -f $PID_FILE ]]
: then
: kill `cat $PID_FILE`
: if [[ $? -ne 0 ]]
: then
: echo "Could not stop oraweb $LISTENER process."
: exit 1
: fi
: else
: echo "Could not find oraweb $LISTENER PID file:"
: echo " $PID_FILE"
: exit 1
: fi
: echo "Usage: listen {start|stop} listener"
: echo "e.g.:"
: echo " listen start admin"
: exit 1
: esac
: #!/bin/ksh
: # Script to start up the Oracle Web Request Broker (wrb)
: # processes manually because owsctl doesn't work on RedHat
: # Linux 6.0
: TMP_FILE=/tmp/wrb.pids
: case "$1" in
: start)
: SLEEP=3
: if [[ -f "$TMP_FILE" ]]
: then
: echo "$TMP_FILE exits. Make sure the wrb is not
: already"
: echo "running, remove $TMP_FILE, and run this script
: again."
: exit 1
: fi
: if [[ -z "$ORAWEB_HOME" ]]
: then
: echo "ORAWEB_HOME is not set. This environment variable"
: echo "should be set to the directory where the oracle
was"
: echo "lives, i.e. /app/oracle/product/8.0.5/ows/3.0"
: exit 1
: fi
: OMN_ADDR=UDP:my.host.com:2649
: OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
: OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
: OWS_ORAWEB_FEEDOMX=1 # I have no idea what this does; I read
: # about it in a newsgroup. Supposedly
: # it makes the oas run faster
: export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FREEDOMX
: PATH=$ORAWEB_HOME/bin:$PATH
: mnaddrsrv -D &
: echo -n "$! " > $TMP_FILE
: sleep $SLEEP
: mnrpcnmsrv &
: echo -n "$! " >> $TMP_FILE
: mnorbsrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbcfg &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrblog &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbasrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbahsrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbroker &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbvpm &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbfac &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbdm &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: stop)
: kill -KILL `cat $TMP_FILE`
: if [[ $? -ne 0 ]]
: then
: echo "Could not stop wrb processes. The PIDs are in"
: echo "$TMP_FILE. If these are running, please"
: echo "stop them manually."
: else
: rm -rf $TMP_FILE
: fi
: echo "Usage: wrb {start|stop}"
: exit 1
: esac
null

Errror while configuring appserver for PS 8.49

Hi nicolas,
My configuration
1. 2003 windows server
2. oracle 10g
3. weblogic 9.2 installed
4. people tool 8.49
5. peoplesoft hrms and campus solution
DATABASE is PSDEMO....
database created as per given on ur blog part I, part II , part III
below ERROR i got it while booting the app server
PSADMIN.2480 (0) [06/10/09 16:50:10](0) Begin boot attempt on domain PSDEMO
PSWATCHSRV.4016 (0) [06/10/09 16:50:18] Checking process status every 120 seconds
PSWATCHSRV.4016 (0) [06/10/09 16:50:18] Server started
PSAPPSRV.2380 (0) [06/10/09 16:50:19](0) PeopleTools Release 8.49 (WinX86) starting
PSAPPSRV.2380 (0) [06/10/09 16:50:19](0) Cache Directory being used: C:\PTv849\appserv\PSDEMO\CACHE\PSAPPSRV_2\
PSAPPSRV.2380 (0) [06/10/09 16:50:19](1) GenMessageBox(200, 0, M): PS General SQ
L Routines: Missing or invalid version of SQL library PSORA (200,0)
PSAPPSRV.2380 (0) [06/10/09 16:50:19](1) GenMessageBox(0, 0, M): Database Signon
*: Could not sign on to database PSDEMO with user PS.*
PSAPPSRV.2380 (0) [06/10/09 16:50:19](0) Server failed to start
PSWATCHSRV.4016 (0) [06/10/09 16:50:20] Shutting down
PSADMIN.2480 (0) [06/10/09 16:50:26](0) End boot attempt on domain PSDEMO
but let me clear me one thing on DB creation part II [ upgrade part ]
FOR steps 5 , 6 , 7 u have given like this " => Don't build it ! "
if we not going to bulid then how it is possible to run STEP 8 to get SQL script from that PPLTLS84CUR.SQL
but here i have run this all steps serially 5, 6, 7, 8, 9, 10, 11, 12 till here it was successful....*[DB PART II ]*
as step 13 is for multilanguage so not required to run
but when running step 14 by USER PS
pt849tlsfra.dms --> not req [if french db, here i install english]
then we are running msgtleng.dms, ptstreng.dms, $PS_HOME/src/cbl/base/storept.dms, ptdefnsec.dms scripts
for above 3 i get errorthe script are msgtleng.dms,$PS_HOME/src/cbl/base/storept.dms, ptdefnsec.dms
AS msgtleng.dms contains
UPDATE PSMSGSETDEFN set VERSION=1;
UPDATE PSVERSION SET VERSION = VERSION 1 WHERE OBJECTTYPENAME = 'PPC';+
UPDATE PSLOCK SET VERSION = VERSION 1 WHERE OBJECTTYPENAME = 'PPC';+
UPDATE PSSTATUS SET LASTREFRESHDTTM=%CURRENTDATETIMEIN;
so table PSVERSION , PSLOCK ,PSSTATUS NOT FOUND FOR PS USER ........
AS in PS user their it did not found table named PSVERSION so gave error
please i am confused for step 14 and 15 of DB creation part II......upgrade onces
and if people tool version 8.48 or later so STEPS like 16 to 19 are not required directly 20 ....
FOR PART III DB CREATION
*$PS_HOME/bin/client/winx86:* psae -CD DMOHRMS9 -CT ORACLE -CO PS -CP PS -R INSTALL -AI VERSION
THIS WAS RUN SUCCESSFULLY...
select count(*), object_type from user_objects group by object_type;
COUNT(*) OBJECT_TYPE
2999 LOB
13 TRIGGER
28268 TABLE
28819 INDEX
18115 VIEW
THE COUNT WAS NOT MATCH AS PER U GAVE.....
Edited by: user11084225 on Jun 10, 2009 5:15 AM

HI NICOLAS
as app server is started but i am not able to configure it in the configuration window tab profile
i have done by entering values like
on profile tab
select radio button application server
ip address + port 7000
but when i use to signon using application designer for PS user its is giving error like
IP = the machine ip where i installed and run the app server
ERROR is
Could not connect to application server PSDEMO (//xx.xx.xx.xxx:7000). Possible causes are: the server name/IP address and port for the application server alias are incorrect, the application server is not booted, or the network is unreachable. Contact your system administrator or check the Tuxedo log for more information.
does i need to set any other things here..or start weblogic server
Edited by: user11084225 on Jun 10, 2009 6:53 AM

Does anybody have a WLST script for step-by-step cluster restart?

Does anybody have a WLST script for step-by-step "smart" cluster restart?

Dear SAM,
are you looking for exchange 2013 installation. Please follow below link. I have done the same scenario as yours
1. install first VM - 2012
2. Static IP / loopback as primary DNS
3. install ADDS /DNS (forwarder to ISP)
4. install second VM - Static IP again
5. DNS of second VM to be the IP of first VM
6. this will join the domain
7. installation of exchange will be simple, configuration from this link : http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

How to configure ActiveSync for a database table in IdM 7.0

Hi All,
Please suggest me the steps to configure ActiveSync in IdM 7.0.
when i try it by resource-->activeSync wizard it gives
"The ActiveSync Wizard has been deprecated in Identity Manager 7.0 in favor of using MetaView and the resource action "Edit Synchronization Policy". "
how to configure ActiveSync for a database table.
Thanx
Shant

Hi,
You need to a script and run it on os level. Here is an example:-
emcli relocate_targets -src_agent=agentmachine1.domain:3872
-dest_agent=agentmachine2.domain:3872 -target_name=RACDB
-target_type=oracle_database -copy_from_src -force=yes
-changed_param=MachineName:agentmachine2.domain
Regards
Jomon
Edited by: JohnJomon on Nov 17, 2011 2:27 PM

Configuring rman for dataguard environment.

Hi all,
Here we have a dataguard environment with db1 as primary and db2 as physical standby database. We configured dataguard in 10g environments and we are not using grid control. Can anyone provide the steps for configuring rman for incremental backups in this environment? We want to schedule the backups to be taken in standby db, (that is applicable in case of swithover too). In the case of swithover to db2 what all do we need to do in rman manually to resume backups in db1?
Thanks

Hello;
A Standby database is a copy of the Primary so if you try to register it RMAN will probably tell you its already registered. I would start with this :
Standby based backup
1. Enable auto backup of the control file and server parameter file. CONFIGURE CONTROLFILE AUTOBACKUP ON.
2. Skip backups on datafiles already backup. CONFIGURE BACKUP OPTIMIZATION.
3. Set the archive deletion policy. CONFIGURE DELETION POLICY TO NONE.
You have to decide on the exact RMAN script you want to use, but since the database is registered you can perform backup on either the Primary or the Standby as the need arises.
See "Using RMAN to Back Up and Restore Files" in "Data Guard Concepts and Administration 10g Release 2 (10.2) B14239-05"
http://docs.oracle.com/cd/B19306_01/server.102/b14239/rman.htm
Example in this post
How to manage primary and standby database backups using rman catalog
How to use standby backup to restore primary db
http://alexzeng.wordpress.com/2008/09/13/how-to-use-standby-backup-to-restore-primary-db/
Best Regards
mseberg

Rman dataguard script for oracle10g

Dear Friends ,
I am going to configure oracle10g dataguard on oracle wnterprise linux 5.0 . I am trying to do this configuration
using RMAN .
After succesfully configuration of the PRIMARY End as well as I am going to configure standby end .
n the standby end I have to run the below rman script and got the syntax error :
[oracle@server dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sun Apr 29 12:59:01 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup nomount pfile=initstan.ora
ORACLE instance started.
Total System Global Area 217157632 bytes
Fixed Size                  2211928 bytes
Variable Size             159387560 bytes
Database Buffers           50331648 bytes
Redo Buffers                5226496 bytes
SQL>
6) Run RMAN and connect to the Standby database and make an auxiliary connection to the Primary database like below :
bash-3.2$ rman target sys@prim
Recovery Manager: Release 11.2.0.3.0 - Production on Fri Mar 24 10:54:37 2000
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database:PRIM (DBID=1247570709)
RMAN> connect auxiliary sys/sys123@stan
connected to auxiliary database: STAN (not mounted)
RMAN
run {
      allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
        allocate channel prmy5 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'prim','stan'
set db_unique_name='prim'
set db_file_name_convert='/u01/app/oracle/oradata/prim/','/u01/app/oracle/oradata/stan/'
set log_file_name_convert='/u01/app/oracle/oradata/prim/','/u01/app/oracle/oradata/stan/'
set control_files='/u01/app/oracle/oradata/stan/control01.ctl','/u01/app/oracle/oradata/stan/control02.ctl','/u01/app/oracle/oradata/stan/control03.ctl'
set log_archive_max_processes='5'
set fal_client='stan'
set fal_server='prim'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(prim,stan)'
set log_archive_dest_2='service=prim ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=prim'
NOFILENAMECHECK
Each and every time when I run the above script got the below error :
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "from": expecting one of: "dorecover, db_file_name_convert, nofilenamecheck, ;"
RMAN-01007: at line 9 column 39 file: standard input
RMAN>
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "identifier": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, configure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, renormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
RMAN-01008: the bad identifier was: parameter_value_convert
RMAN-01007: at line 2 column 1 file: standard input
Does anybody please correct the above script for 10g or if there any document for configuring oracle10g dataguard
using RMAN , then please help me .
Thx in advance .. ..

shipon_97 wrote:
Dear Friends ,
I am going to configure oracle10g dataguard on oracle wnterprise linux 5.0 . I am trying to do this configuration
using RMAN .
After succesfully configuration of the PRIMARY End as well as I am going to configure standby end .
n the standby end I have to run the below rman script and got the syntax error :
You cannot use FROM ACTIVE DATABASE - option, If your database version is 10g .
Regards
Mahir M. Quluzade

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

Script for cold backup using RMAN

Dear all,
db_version:-10.2.0.4
os_version:- Windows 2003 server
I wish to schedule a script that will take cold backup of my database using RMAN.
Any help is appreciated ..
Edited by: user12000301 on May 18, 2011 5:02 AM

Dear All,
Thanks a lot for your valuable time :
However i have managed to do it as follows :
1. First i have configure the parameter of RMAN ( Since it is my UAT in Noarchive log mode), I have never tried RMAN cold backup on the same.
Following is the out put of SHOW ALL;
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'D:\DB\RMAN_BKP\BACKUPS%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'D:\DB\RMAN_BKP\BACKUPS\DB_%U.%r';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'D:\DB\RMAN_BKP\BACKUPS\SNCFDB.ORA';
2. I have created a rman_cold_bkp.bat file which has following entry :
cd c:\oracle10g\bin
set oracle_sid=DB
rman target system/*** @D:\DB\RMAN_BKP\SCRIPT\rman_cold_bkp.rcv log=D:\DB\RMAN_BKP\SCRIPT\rman_cold_bkp.log
exit
3. Whereas rman_cold_bkp.rcv file contains following contents:
run
allocate channel C1 device type disk;
shutdown immediate;
startup mount;
backup database;
alter database open;
release channel C1;
exit
I did checked it and it;s working fine for me :-)
Regards,
Girish

Problem : tcl script for filter IPSec cosmetic log

Hi all, I would like some advice from anyone who ever see this case. I applied tcl script for filter ipsec error log that log is cosmetic. But my site want to don't see this log from router log. I already create tcl script for filter it out. Ok script can work fine but it more work. It filter other message not just ipsec log out. I check cisco device that support script. How can I fix this problem.
See my detail of script and ios version of router :
script :
# VPN_Error.tcl This script deletes all log messages about VPN error messages
# The script will filter by combination between facility-serverity and mnemonic
# Created on 05-Oct-2012.
set msgs [list {CRYPTO-4-RECVD_PKT_MAC_ERR} {VPN_HW-1-PACKET_ERROR} {CRYPTO-4-RECVD_PKT_NOT_IPSEC} {CRYPTO-4-PKT_REPLAY_ERR}]
set fac_sev_mnem "${::facility}-${::severity}-${::mnemonic}"
foreach msg $msgs {
    if { $msg == $fac_sev_mnem } {
    return ""
return $::orig_msg
ios router version :
: c2800nm-adventerprisek9-mz.124-25f.bin
: c2800nm-adventerprisek9-mz.124-7b.bin
log information and configuration
When I applied command:
logging filter flash:VPN_Filter2.tcl
logging buffered filtered 4096 debugging
show log file:
router#sh logg
Syslog logging: enabled (11 messages dropped, 1 messages rate-limited,
                0 flushes, 0 overruns, xml disabled, filtering enabled)
    Console logging: level debugging, 18145 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level debugging, 428 messages logged, xml disabled,
                     filtering disabled
        Logging to: vty322(2)
    Buffer logging: level debugging, 0 messages logged, xml disabled,
                    filtering enabled (0 messages logged)
    Logging Exception size (4096 bytes)
    Count and timestamp logging messages: disabled
Filter modules:
    flash:VPN_Filter2.tcl
    Trap logging: level informational, 47011 message lines logged
        Logging to 10.145.0.25 (udp port 514, audit disabled, link up), 47011 message lines logged, xml disabled,
               filtering disabled
        Logging to 10.247.17.41 (udp port 514, audit disabled, link up), 47011 message lines logged, xml disabled,
               filtering disabled
        Logging to 10.247.17.45 (udp port 514, audit disabled, link up), 47011 message lines logged, xml disabled,
               filtering disabled
--More--
Log Buffer (4096 bytes):
router#
If you have some more information. Please tell me.
Thank you for your advice

It looks like your script has an error. You have an extra '}'. It should be:
# VPN_Error.tcl This script deletes all log messages about VPN error messages# The script will filter by combination between facility-serverity and mnemonic       # Created on 05-Oct-2012.#set msgs [list {CRYPTO-4-RECVD_PKT_MAC_ERR} {VPN_HW-1-PACKET_ERROR} {CRYPTO-4-RECVD_PKT_NOT_IPSEC} {CRYPTO-4-PKT_REPLAY_ERR}]set fac_sev_mnem "${::facility}-${::severity}-${::mnemonic}"foreach msg $msgs {    if { $msg == $fac_sev_mnem } {        return ""    } } return $::orig_msg

Does anyone have access to the Roadrunner dial up script for Mac?

Hello,
I'm getting authentication error when connecting to Roadrunner through their dial up service. I'm told I need a dial up script. The URL they provided leads to a file not found error.
I would also appreciate knowing where I would put this script once I get it.
Thank you in advance,
Mark

There is no dial-up script for RR. There's a dial-up script for the modem you are using, and that's selected in the modem configuration through Network preferences.
Authentication errors occur when the userid and/or password provided for the dial-up account are not correct. They are not caused by the dial-up script itself unless RR uses some sort of non-standard authentication dialog. It's been a long time since I ever used their dial-up, but I don't recall they used a non-standard dialog at the time.
In earlier versions of OS X it was possible to open the dial-up terminal manually so you could observe the remote dialog and enter responses to the dial-in procedure. You could then save the resulting dialog into a login script that would be used once the dial-up connection was made. Unfortunately, I haven't used dial-up in several years, so I'm afraid I'm not much help in this regard. You could do some exploring in Mac Help from the Finder's Help menu to see if you find a help article.

Test Script for Billing

Hello Experts,
I would like create test script for Billing.Since i have no clue about test script coz in my previous organization we have not made any script for testing.Now i would like to create testing for Billing.
Could you all explain me what are the pre - requisites for testing only for Billing.
What are the different ways for testing to perform since i have never worked on testing on documentations.
Your reply would appreciate.
Thanks
Shri...

Test script is nothing but unit testing through which you list down the steps that are needed to execute a test case and record the results.
In your case, since you wanted a test script for billing, first you need to identify the different types of billing documents configured in production client. For each and every billing document type, you need to create a test document and record in the following format
Test Scenario No.
Scenario:::Billing
No.::TCode:::Description:::Input Data:::Output Data:::Remarks (OK/Error)
We call this process as ASAP Methodology. The prescribed format you can get in service market place.
thanks
G. Lakshmipathi

Configuring script for lt42

Similar Messages

Maybe you are looking for