Configuring SSD as a boot drive

Hi!
I've finally ordered a six cores Mac Pro and I'm waiting for a SSD from OWC.
I intend to use the SSD as a boot drive so I plan to copy the content of the Mac Pro boot drive with SuperDuper when I'll receive it and restore it to the SSD.
I've read few comments here from users who says that could be a risky operation doing so due to the fact that a SSD doesn't behave as a regular hard disk. I'm a bit skeptical because it is a very common operation to backup and restore a boot drive.
Anyone has used SuperDuper with an SSD ?
Thanks!

Tom Nelson1 wrote:
I don;t see why it would be a problem. But then again I'd be more inclined to just re-install using the DVDs that come with your new Mac Pro. After all you have no data to save at this point, so doing a fresh install is just a nice simple process.
Tom
I'm not familiar with the Mac Pro and the supplied DVD. There is no special driver or configuration specific to the Mac Pro already installed on the HD ? The regular install DVD would do the job ? If so, you're right. It is a lot easier just to reinstall from the DVD.
Many thanks.

Similar Messages

  • Configure SSD as window boot drive

    Hello HP support Forum.
    I have a Pavillion p7 - 1240 desktop. I installed 120gb SSD drive. Window 7 recogizes SSD drive as regular active drive, but not as a boot drive. I want to configure 120 GB SSD as boot drive and 1.0 terabyte HDD as storage. How do I go configure Window 7.0 Home Edition  to boot from SSD ?
    Please Help? 
    thank you

    Hello  Lasvegaswireman and thank you for responding and helping with installation of 120 Gb bytes SSd.
    I did a clean installation of bare bone Window 7 Home edition - on SSD drive. window was able to boot up successfully without any error messages.
    However, window 7 does not recongnize or detect  external  1 terabyte backup usb drive when I plugged it to USB port ; backup drive has power as indicated by LED on.  I were unable to restore backup file from external USB drive because - USB controllers, network adapter and all  crtical configurations of the orginal HP factory settings were not loaded; as the result, I were not able to use usb port restore computer setting from backup. it's a bare bone Window 7.0 Home edition 64 bit.  No internet connection detected.
    I pondered the mirror image backup of my internal hard drive, but the size of mirror image is 190 gigabyte, which is  larger the capacity of the 120 gbyte SSD.
    how do I work around or resolve this problem? I had not format the orginal  internal 1 terabyte hard drive yet for fear I might loose settings should I fail to restore files and data from external usb hard drive.
    I used Microsoft provided backup that comes with Window 7.  How do I load and restore all drivers and settings from USB drive onto SSD  drive , and use 1 terabyte HDD as data storage.
    I have not formated  internal 1terabyte hdd yet for fear of loosing all settings and configurations should I fail to restore data from external backup.
    Would you show me how to resolve or work around these issue?  I want to get larger capacity SSD to accomodate  mirror image but it is costly for budget.
    I thank you for your help, and I am eager to get resolution.
    Cordially Yours.

  • How to install SSD as a boot drive for Snow leopard? I am confused...

    Hello; This is first time I will use SSD on my macpro. I ordered the SSD from amazon and it will come next week I hope. I need some help and advice. My boot drive is HDD (Macintosh HD) now. So, I Want to move from the HDD to SSD. What's the easiest and guarentee way to do it? I am not a good technician. I've read about carbon copy cleaner or disk utility to back-up everything to another drive, boot from there then select the SSD. Is this needed? Cant I just directly copy my application and operation System to SSD? How about using the installation disc and directly install to the SSD? I am confused. What do you suggest? Please help
    My system:
    Macpro early 2008 (3.1)
    OS 10.6.8
    SSD is samsung 840 series 256 GB... (Since My macpro dont use SATA 3, I didnt see any reason to invest more money and buy 840 pro series or 830 series)

    Hi, There are any number of different ways to move the data from one drive to another. My preference (the last one) would be to do a clean fresh install using system disks because of the way SSD drive's lay down data.
    I'm not going to go into detail laying out HOW you do this. I assume you can do a Google (or other) engine search for details.
    1) SystemMigration - this is a built in MAC OS X utility that allows you to move system + data from one drive to another
    2)  Do a Time Machine backup of everything and then use TM to restore everything the way it is or REINSTALL a clean install of the data+new system on the replacement drive.
    3) Carbon copy Cloner is a great cloning application and can "block clone" from a smaller drive to a replacement drive of the same or larger size
    The above 3 methods assume you will transfer ALL the date, good bad & ugly, from the magnetic media to the SSD. This is the most efficient method,  but from personal experience you may end up not getting
    the faster boot up time and disk responsiveness you would expect from an SSD. I can't say why; it may have to do with the way data is initially "laid down" on the SSD OR all the extra "jetsam and flotsam" that accompanies a used system drive - "(how's THAT for non techno-geek detail).
    I have noticed that Drive clones are only as good as the source from which they are taken and that when I cloned a magnetic Lion 10.6 Drive to an SSD, there was no significant advantage in boot times with a 10.6 Lion boot taking anywhere from 45 to 60 to 75 seconds (pretty much he same for magnetic drives).
    I then did an original clean system install on the SSD as if I were doing it for the first time....updated it completely and THEN and only then did I reinstall all the apps individually followed by cloining the data files.
    By doing this, I was able to cut the boot time on that SSD (and all subsequent ssd clones of the original SDD) to 25 to 30 seconds.
    NOT BAD. Just simply cloning what you already have is a simple option, but if you're looking for optimal SSD performance, I'd opt for a fresh clean instll of everything.

  • Kernel panic when I try to use an express 34 SSD as a boot drive

    Can anyone make hide or hair out of this?
    Interval Since Last Panic Report: 4016068 sec
    Panics Since Last Report: 4
    Anonymous UUID: 1D45F5BA-DC3A-4C88-B3DB-8980934389C1
    Sat Feb 27 02:50:36 2010
    panic(cpu 1 caller 0x55648d): "getPhysicalSegment() out of 32b range 0x10000f000, len 0x1000, class IOGeneralMemoryDescriptor"@/SourceCache/xnu/xnu-1486.2.11/iokit/Kernel/IOMemory Descriptor.cpp:1597
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x5cd7baf8 : 0x21b2bd (0x5cf868 0x5cd7bb2c 0x223719 0x0)
    0x5cd7bb48 : 0x55648d (0x5d8d28 0xf000 0x1 0x1000)
    0x5cd7bb98 : 0x551acb (0xa88fd00 0x6000 0x5cd7bbdc 0x0)
    0x5cd7bbf8 : 0x5ce472a4 (0x9b0d8e0 0xa88fd00 0x6000 0x5cd7bc44)
    0x5cd7bc68 : 0x1220c27 (0x9a6a200 0x0 0x86563692 0x10b)
    0x5cd7bc88 : 0x121d5be (0x9a6a200 0x7530 0xf4240 0x121f326)
    0x5cd7bca8 : 0x121d453 (0x9a6a200 0x7530 0x5cd7bcf8 0x54ee2c)
    0x5cd7bcc8 : 0x121cea5 (0x9a6a200 0x9971500 0x0 0x0)
    0x5cd7bce8 : 0x121ce67 (0x9a6a200 0x9971500 0x0 0x0)
    0x5cd7bd18 : 0x549661 (0x9a6a200 0x9971500 0x5cd7bd9c 0x0)
    0x5cd7bd68 : 0x121ce2a (0x9b01800 0x121ce34 0x9971500 0x5cd7bd9c)
    0x5cd7bda8 : 0x121a527 (0x9a6a200 0x9a65a00 0x9971500 0x5ce28cfb)
    0x5cd7bdd8 : 0x5ce307dc (0x9a65a00 0x9971500 0x8a31e51e 0x104)
    0x5cd7be18 : 0x5ce30a21 (0x9a62200 0x9d37318 0x20000 0x0)
    0x5cd7be78 : 0x5ce28488 (0x9a62200 0x9d372c0 0x1 0x121f7d4)
    0x5cd7be98 : 0x121d203 (0x9a00a00 0x0 0x5cd7bec8 0x50)
    0x5cd7bec8 : 0x121d56a (0x9a6a200 0x0 0x5cd7bf38 0x50847e20)
    0x5cd7bee8 : 0x5ce46b6a (0x9a6a200 0x4 0x5cd7bf68 0x226f27)
    0x5cd7bf08 : 0x5491b5 (0x9a6a200 0x9a65980 0x1 0x29c50a)
    0x5cd7bf58 : 0x5481e6 (0x9a65980 0x806545c 0x5cd7bf88 0x226f92)
    Backtrace continues...
    Kernel Extensions in backtrace (with dependencies):
    com.apple.iokit.IOATABlockStorage(2.5.0)@0x5ce27000->0x5ce34fff
    dependency: com.apple.iokit.IOATAFamily(2.5.0)@0x1219000
    dependency: com.apple.iokit.IOStorageFamily(1.6)@0xff4000
    com.jmicron.JMicronATA(1.0.0)@0x5ce45000->0x5ce4bfff
    dependency: com.apple.iokit.IOATAFamily(2.5.0)@0x1219000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
    com.apple.iokit.IOATAFamily(2.5.0)@0x1219000->0x1225fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10C540
    Kernel version:
    Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
    System model name: MacBookPro4,1 (Mac-F42C89C8)
    System uptime in nanoseconds: 1119010358957
    unloaded kexts:
    com.apple.driver.AppleFileSystemDriver 2.0 (addr 0x100c000, size 0x12288) - last unloaded 225810922835
    loaded kexts:
    com.parallels.kext.prl_vnic 5.0 9308.543312
    com.parallels.kext.prl_netbridge 5.0 9308.543312
    com.parallels.kext.prlusbconnect 5.0 9308.543312
    com.parallels.kext.prlhidhook 5.0 9308.543312
    com.parallels.kext.prl_hypervisor 5.0 9308.543312
    com.jmicron.JMicronATA 1.0.0
    com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 42663542730
    com.apple.driver.AppleHDA 1.7.9a4
    com.apple.driver.AppleUpstreamUserClient 3.1.0
    com.apple.driver.AppleLPC 1.4.9
    com.apple.GeForce 6.0.6
    com.apple.driver.AppleBacklight 170.0.14
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.filesystems.autofs 2.1.0
    com.apple.kext.AppleSMCLMU 1.4.5d1
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.2
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
    com.apple.driver.AppleUSBTCButtons 1.8.0b4
    com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
    com.apple.driver.AppleIRController 251.1.4
    com.apple.iokit.SCSITaskUserClient 2.6.0
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.0
    com.apple.driver.AppleIntelPIIXATA 2.5.0
    com.apple.driver.AppleAHCIPort 2.0.1
    com.apple.driver.AppleUSBHub 3.8.4
    com.apple.iokit.AppleYukon2 3.1.14b1
    com.apple.driver.AirPortBrcm43xx 421.91.26
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleFWOHCI 4.4.0
    com.apple.driver.AppleUSBEHCI 3.7.5
    com.apple.driver.AppleUSBUHCI 3.7.5
    com.apple.driver.AppleEFINVRAM 1.3.0
    com.apple.driver.AppleRTC 1.3
    com.apple.driver.AppleHPET 1.4
    com.apple.driver.AppleACPIButtons 1.3
    com.apple.driver.AppleSMBIOS 1.4
    com.apple.driver.AppleACPIEC 1.3
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
    com.apple.security.sandbox 0
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.0
    com.apple.iokit.IOATABlockStorage 2.5.0
    com.apple.iokit.IOUSBMassStorageClass 2.5.1
    com.apple.driver.DspFuncLib 1.7.9a4
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.nvidia.nv50hal 6.0.6
    com.apple.NVDAResman 6.0.6
    com.apple.iokit.IONDRVSupport 2.0
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 73.0
    com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.7.2fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.7.9a4
    com.apple.iokit.IOGraphicsFamily 2.0
    com.apple.iokit.IOHDAFamily 1.7.9a4
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.0.1d2
    com.apple.driver.IOPlatformPluginFamily 4.0.1d0
    com.apple.driver.AppleUSBMultitouch 204.9
    com.apple.iokit.IOUSBHIDDriver 3.8.4
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.2.4f3
    com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
    com.apple.iokit.IOBluetoothFamily 2.2.4f3
    com.apple.driver.AppleUSBMergeNub 3.8.5
    com.apple.driver.AppleUSBComposite 3.7.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOATAPIProtocolTransport 2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
    com.apple.iokit.IOATAFamily 2.5.0
    com.apple.iokit.IOAHCIFamily 2.0.2
    com.apple.iokit.IOUSBUserClient 3.8.5
    com.apple.iokit.IO80211Family 310.6
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.iokit.IOFireWireFamily 4.1.7
    com.apple.iokit.IOUSBFamily 3.8.5
    com.apple.driver.AppleEFIRuntime 1.3.0
    com.apple.iokit.IOHIDFamily 1.6.1
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 281
    com.apple.iokit.IOStorageFamily 1.6
    com.apple.driver.AppleACPIPlatform 1.3
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.27f2
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.26)
    Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS722020K9SA00, 186.31 GB
    Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0230, 0x5d200000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000

    If you don't get the KP when booting from the internal, then suspect a corrupt installation on the SSD or that the SSD is causing the issue. See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • Permissions problem with new SSD boot drive

    I recently installed an OWC SSD drive as a boot drive on an iMac I've had for many years. I’m having some sort of permissioning error that I can’t figure out how to resolve.
    I’ve setup the SSD as the boot drive (created user named “Boot Admin”). 10.9.3. All data and files remain on my old spinning disk
    When the computer first boots, as expected, I’m presented with 2 users at the login screen (“Boot Admin”; Original User Account). If I choose my old user account, I receive the following error:
    "You are unable to log in to the user account “<name of original user account>" at this time. Logging in to the account failed because an error occurred.”
    If I choose the Boot Admin user I’m able to login without issue as the Boot Admin user (no access to my original apps and data). At that point, I can choose Log Out from the Apple menu and then login using my old user account. When I follow that sequence, I’m able to login with no issues. Apps are there, data is accessible etc. I can enjoy the speed of the SSD.
    Although, if browse within Finder to the Boot Admin user on the hard drive, none of the folders are accessible (the little red icon is on the folders). Similarly, if I boot straight into the Boot Admin user and browse to my original User on the hard drive, none of its folders are accessible!
    I am at a loss on how to troubleshoot. Ideally, I would like to login in directly to my old user account (eliminate the 2 step — login to Boot Admin, log out, login to Original User) and have full file access to things within both the Boot Admin user and my original user account.
    Any guidance or tips on how to troubleshoot? thanks in advance

    I appreciate the continued assistance. I'm clearly overlooking something and Google is not my friend! I've tried.
    At the expense of repeating myself, I'll share my current configuration:
    10.9.3
    2 hard drives (new SSD with name "Boot Drive" and original spinning disk "Macintosh HD")
    Startup Disk in System Preferences is "Boot Drive"
    "Macintosh HD" has 3 User Folders: bootadmin, jayelevy, shared
    jayelevy is my home folder - all my documents are in tact
    bootadmin has the normal home folder structure
    "Boot Drive" has 3 User Folders: bootadmin, jayelevy, shared
    jayelevy is empty; no folders
    bootadmin has the normal home folder structure (Desktop, Documents, Downloads, Movies, etc), but each is empty with the exception of Movies and Pictures. I've moved my Aperture databases to these 2 folders to take advantage of the speed of the SSD
    When I restart the iMac I'm presented with 2 user choices: jayelevy and bootadmin
    If I initially select jayelevy, I receive the error mentioned at the start of the thread
    If I initially select bootadmin, I can login without issue, but get the standard Mac desktop (not my home).
    If I then log out of bootadmin (not restart, but logout) and then choose jayelevy, the signin completes successfully and my desktop/home folder is restored to it's normal and expected condition.
    I am still trying to avoid this step of login/logout/login.
    I imagine I'm overlooking the obvious, but I'm in uncharted grounds for me! Here I thought the hardware swap to replace my optical drive with SSD would be the hard part. That was simple! I've stumbled on the software side!

  • TM to backup from an external SSD boot drive

    I have just installed a 240GB LaCie Little Big Disk Thunderbold SSD as a boot drive for my 2011 iMac (which contains only the 7,200 prm HDD). This has improved read/write speeds dramatically. I have transferred all my data and applications to the external drive in order to see the full benefit of the SSD.
    However, I had not considered Time Machine. I thought it would simply be a matter of identifying the external drive and then connecting to the Time Capsule. However, the external drive is not visible in Time Machine set up and I suspect there could be a good reason: that it is not possible. Any help would be appreciated.
    Michael

    External storage devices are automatically added to the Time Machine exclusion list when first mounted. If you want them to be backed up, you have to remove them from the list in the Time Machine preference pane.

  • M92p SFF: Possible to add a 2.5" SSD boot drive in the 3.5" external card reader bay?

    I recently bought a M92p Small Form Factor with model number 2988-A5U. 
    Is it possible to to add an additional 2.5" SSD as a boot drive while retaining the 3.5" 1TB SATA as the data drive?
    I have searched many posts and datasheets on the internet but could't find an answer.
    http://www.partnerinfo.lenovo.com/partners/us/products/downloads/thinkcentre-mseries/ThinkCentre-M92...
    The above specs. states that it supports 2 HDDs but I can't find another 3.5" or 2.5" internal HDD bay. 
    My thought is to put a 2.5" SSD into the 3.5" card reader bay. Is it feasible?

    I ordered a 2.5" General 2.5" SSD to 3.5" SATA Hard Disk Drive HDD caddy from Amazon that fit perfectly! General 2.5" SSD to 3.5" SATA HDD caddy It came with screws that fit the new SSD, and the caddy fit the blue plastic carrier that slides into the 3.5" bay. This caddy properly aligns the connectors off to the left side, supports up to 6GBs SATA, and is even hot swappable.

  • Cloning Hdd to SSD boot drive and what happens with Music/Logic Plugins

    Hi, my computer is a mid-2012 Mac Pro 12 Core
    It's a great computer but I'm considering upgrading my main boot drive (WD Caviar Black 1TB HDD) to a 1tB Samsung EVO 840 SSD drive (I'm using a sonnet tempo PCI card to mount an SSD that holds audio at the moment and will add another SSD for the boot drive I'm referring to) so I just had a question - if I clone the HDD to the new SSD, what happens with things like licenses for my audio plugins, such as Native Instruments Komplete, programs by IKMultemedia. programs that use an ILOK such as Steven Slate Plugins and also, WAVES plugins?  Will this info all carry across to the new SSD drive or do you think I'll need to reauthorise some things?  I have all the serials etc so this shouldn't be an issue, but just wondered.
    Any help would be appreciated as it feels like quite a big step in that it's my main system drive!
    Thanks in advance
    Sam

    CCC is excellent. If it doesn't work then sure, just always have a safety net of your system that is untouched.
    Also, after a clean install, CLONE it!
    And then use Setup Assistant. Migration Assistant.
    Clone of the system can go on sparse disk images too so you don't have to partition (should have at least one though) and you can have clone from different stages and versions: 10.9.4, without Setup Assistant, migrated, full loaded with all your apps. Multiple versions.
    CCC is designed to make a working bootable copy of a system so you can move the system to another boot device like hdd and SSDs without the worry.
    But I think we were talking about a system that did not see a clean install of Mountain Lion or Mavericks so it is over due for one!

  • New SSD boot drive. Confused about "Incompressible Data Rates"

    Hi everyone,
    My editing machine is a 2011 17" MacBook Pro with the OEM 128GB SSD. I'm getting close to filling this drive and so I was thinking of upgrading to a larger capacity and faster SSD for my boot drive. (All my media storage, caches and whatnot are stored on FW800 drives). I was looking at the OWC Mercury 6G drives. For the price, I'd love to get the 480GB Mercury Electra drive, but I see that it states that the read/write speeds are severely lessened for "Incompressible Data Rates" such as photos and video. The OWC people obviously recommend to me to buy the Extreme. Is it necessary to get the Extreme? I find that even the OEM SSD I use now allows me to run PPro CS5.5 perfectly fine. I'm not editing 4K footage or more than 2-3 camera angles (I primarly do news video production).
    Thank you,
    William

    If you don't keep footage on the drive (and you shouldn't), then you don't need to worry about it.

  • Installing OS and Apps on SSD boot drive on early 2008 Mac Pro while keeping all other data from old iMac on hdd

    So I've just got myself a early 2008 Mac Pro with a OCZ RevoDrive 80GB PCIe SSD to replace my old iMac which is slowly but surely giving up on me. I want to put my OS (mavericks) and some/all (whichever is possible/easier) apps, both apple and 3rd party, from my old iMac, onto the SSD but keep all my other data on the 2TB HDD, also from my old iMac, in the mac pro. Can anyone tell me how to do this/if its possible? (not massively tech savvy so simpleish language and steps would be handy!) Thanks!

    How to use an SSD with your HDD
    If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
    After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
    Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
    When the computer boots up it will now be using the Home folder located on the HDD.
    Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
    Be sure you retain the fully bootable system on your HDD in case you ever need it.

  • SSD for boot drive

    I've installed a Seagate SSHD hybrid SSD / HD unit and installed Mavericks on it.  Things do run fast.  However,
    something worries me a bit.  Since a block of SSD can be written only so many time before it reaches the end of its
    life, will the system drive have problems with this.  Unix uses some sort of swap disk to allow more to run than there is sufficient
    memory for.  This means sections of memory which are dirty (changed from when the program started) get written out to a
    swap file so the memory can be used by other programs.  Windows XP did this as well.  I imagine other modern systems do thet
    same.
    Will this cause the boot drive to get more writes than it might otherwise have?
    Against this, I observe that the Macbook Air uses SSD for its only built-in drive and that the new MacPro uses SSD for its boot drive.
    This leads me to think, that OS X does not do enough writing to the boot drive other than user data files to have a significant effect.
    Does anyone know more about this?
    Thanks,
    Bruce

    All recent SSDs already incorporate wear leveling in their firmware to extend their longevity as much as possible.
    SSDs all have a finite write / erase cycle limit and will eventually fail, but it is reasonable to expect their lifespan should equal or exceed that of conventional hard disks. High capacity consumer grade hard disks should be considered wear items that will require eventual replacement. SSDs are no different, the only question being how much longer they will last in typical, average consumer applications. There is no doubt they are more abuse-proof than HDs and are preferable overall despite having a finite lifespan.
    For all practical purposes a HD's capacity eventually becomes too limiting for most users, and require replacement for that reason whether or not they fail. SSDs are no different in that regard.
    Unix uses some sort of swap disk to allow more to run than there is sufficient memory for.  This means sections of memory which are dirty (changed from when the program started) get written out to a swap file so the memory can be used by other programs.
    Macs have been doing that for ages, well before OS X was as much as a sketch on a cocktail napkin. Mavericks uses a new "memory compression" algorithm to minimize use of mass storage swapfiles entirely. It's light years ahead of XP or anything else.
    Apple's Fusion Drive intelligently migrates frequently used data to the SSD. Whether Seagate's hybrid drive it is capable of that is unknown.

  • Yosemite crashed and my default boot drive is not visible

    I installed Yosemite with no problems, but while playing a game my 2009 Mac Pro crashed, which has never happened before. On reboot, it now seems to be booting from a secondary internal drive, which is essentially a clean 10.9 install. My SSD, which was my main drive, is no longer visible. It can't be seen from Disk Warrior 4.4, Disk Utility, or under the About this Mac system report.
    I have a Time Machine backup, on an external drive, from this afternoon, but it is not configure for the "new" boot drive. I am not sure how to use it to overwrite this drive. Maybe I should have posted this in the Time Machine forum, but I thought the Yosemite crash was the important point.
    Any Ideas on how I can recover my old drive or restore my backup on my secondary drive?

    I am up and running again. I removed my SSD and replaced it with an older drive that I had removed when I put the SSD in. The old drive could not be seen on reboot, but the SSD could be seen through a USB port. I assumed this meant my SATA controller had a problem. I decided to reinstall the SSD in the empty optical drive bay. Int he process I had to remove the 2 OS X hard drives, the one that booted in bay 2, and the one that could not be seen in bay 1. I also reinstalled those 2 drives. Bay 3 and 4 have windows drives.
    Upon booting all three OS X drives could be seen. After giving them all unique names, I was able to boot back into Yosemite. I have no idea what was wrong. Was it the OS, the drive, the SATA controller? All seem to be working now.
    Lets see what happens when I try to play my game again!

  • Changing Boot Drives and Keep Your Time Machine History

    A problem with Time Machine is that it is specific to the target and backup drives.  Change one or the other and TM will want to do a new full backup. If you don't have enough space, it will delete your old backups. HOWEVER, this is a way to install a new boot (or other) drive that TM is backing up and get it to pick up where it left off doing incremental backups.  This is extremely helpful if you change your boot drive.  In my case, I moved from a HDD to an SSD but wanted to keep my history intact.  TIme Machine "knows" which drive to backup based on the UUID (unique drive identifier) so merely changing the name of the drive in the Finder won't do it.  You need to change the UUID in the latest backup of TM.
    Note: This is not for the faint of heart or technically challenged. It also requires a mild knowledge of unix or at least the ability to follow instructions TO THE LETTER!  You will change the UUID from the Latest Backup in Time Machine from the "old" drive to the "new" drive thus tricking TM into thinking the new drive is the old drive and it will continue to do incremental backups of the new drive.  The technique described below was originally developed under OS 10.5 (and posted on the MAC OS HINTS 10.5 blog but I have just used it under Snow Leopard.  It might work for newer OSs but I haven't tried them.  I actually did 2 things: 1) Installed a larger TM drive and 2) installed a SSD as a boot drive.  I will post under a different title to provide information on installing a larger TM drive since putting that information here may be confusing. 
    You will need 2 Unix commands: xattr and fsaclctl.  xattr is included in OS 10.6 Unix shell but fsaclctl is not.  You will have to get fsaclctl from a version of OS 10.5 using the techniques described in the article posted below.  I had an old 10.5 disc and found it in: /sbin/fsaclctl at the root directory of my 10.5 hard drive.  I also performed the technicque described below logged in as root but this may merely logged in as an administrotor. 
    ** How to change your boot (or any other) drive and get Time Machine to just pick up where it left off doing incremental backups and not do a full backup of the new drive:
    1) Turn OFF Time Machine
    2) Install the new drive
    3) Clone the old drive to the new drive (in my case HDD -> SSD) using SuperDuper, CarbonCopyCloner or even Disk Utility
    4) Make sure you have both xattr and fsaclctl commands installed
    5) Open Terminal
    6) Follow the instructions here: 
    http://hints.macworld.com/article.php?story=20090213071015789&query=time+machine +new+disc
    Note: you may need to use the command switch "l" (the letter l) to see the ascii version of the UUID
    sudo xattr -l com.apple.backupd.SnapshotVolumeUUID my_partition
    Note: Unix uses spaces (white space) as delimiters and is always case sensitive so if you have spaces in the name of your drives, you MUST put the drive name in quotation marks:
    if the drive name is: My HDD then to list the contents of the drive in Unix would use the command ls thus:
    > ls "My HDD"
    will list the contents of My HDD
    (the command:  > ls My HDD (without quotation marks) will produce an error - no such file or directory)
    When you've followed the above procedure and turned Time Machine back on, the first time TM may warn you that the disc has been changed and "someone may be trying to trick your computer" into using the new drive.  Answer: do the backup
    I wish I could take credit for this brilliant technique but I just followed it and it worked for me. I also read the entire thread before starting.

    The two drives are handled as separate drives, even if they have the same name.
    In essence, the old backups are from a drive that's no longer connected; see #E3 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.

  • Can the creative cloud apps be installed on a drive other than the boot drive?

    I have an SSD for the boot drive and keep most apps on an 'applications' drive. It appears that CC apps install by default to the boot drive. Am I incorrect? Can I control what drive they install on?

    Yes you can change the install location:
    Launch the Adobe Application Manager.
    Click on your name in the top left and from the context menu choose Preferences.
    Change the Install Location to the one you want.

  • What size SSD? Swapping Optical Drive for gen. storage.

    I'm planning on buying a smaller SSD and was looking for suggestions on the best size to buy. I have a 13" Late 2011 Macbook Pro, i5. 8gb RAM. 500gb HDD.
    What I'm doing is replacing my 500gb HDD and moving that to my optical bay just for general storage. I'm going to set up my new SSD as the boot drive. I want to boost my performance for as little money as possible. I know that I can put 16gb RAM in and get significant improvement, but really want to get rid of the HDD as the boot drive. I'm leaning toward getting either the 44gb or 60gb Mercury Electra 6G SSD.
    Any suggestions on what size would be best for what I want or any other suggestions are welcome.

    I suggest that you get at least a 240 GB SSD. SATA3, of course!
    Larger SSDs are generally much faster, and the price is now dropping (to the point that I have just purchased an 1Tb Crucial M500 SSD for less than 400 €). The price difference between a 64 GB SSD and a 240 GB SSD is now minimal, and you will enjoy more space!
    Two years ago, as soon as I purchased my late-2011 MBP, I immediately did the same, moving the original 750Gb HD to the optical bay, and installing a 240Gb Vertex-2 SSD in the main bay as system disk.
    The space was just enough, as I have Bootcamp and Windows 7, too, so I divided it half-and-half, and a 128Gb storage is just barely enough for either OSX and Wndows-7 64 bits Pro...
    You could survive with a 128 GB SSD if you do not need Bootcamp. Indeed, I always recommend to install Bootcamp and Windows 7 to all Mac owners, so you get the best of the two worlds. I love OSX, but for certain tasks Windows is still vastly superior (using Autocad, for example)...
    Curiously, instead, I prefer OSX for Office...

Maybe you are looking for