Configuring the weblogic domain with multiple managed servers(SOA)

Hi
We are trying to create a domain where we have a admin server and 2 SOA manged servers under a cluster.
domain
Admin_Server
SOA_Cluster
SOA_Managed1
SOA_Managed2
I tries the default values but that puts my soa-infra into the Admin server and as far as I know that is not supposed to be the case.
Can any one tell me what are the libraries that I should be selecting for the cluster when I try configuring the domain?
Thanks

Thanks Vlad.
I found another link that might be helpful to someone who is looking for something like this
https://blogs.oracle.com/reynolds/entry/installing_an_11g_soa_cluster_2
Thanks.

Similar Messages

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

Run Admin Server with multiple Managed Servers each using different userid?

We currently run separate WebLogic domain instances for each business application in a Unix environment. Each one is created using a unix userid unique to that application and which owns all the files and is used to run the process when that particular WebLogic instance is started up. We have run this way for a while.
I am considering altering our approach to the one that is recommended, i.e. in our Production environment we would run a single Admin instance with numerous managed servers. One issue I'm stuck on is the fact that in our current environment, each application has a different unix userid that owns the files making up the WebLogic domain instance and that WebLogic instance is run under that userid.
I've investigated and experimented using WebLogic 10.3 preview and WebLogic 10.0, but I haven't been able to determine what I have to do to make each managed server's files and processes belong to a different unix userid, if that is even possible.
Is there a way, using the recommended approach, where there is a single Admin instance that has multiple managed servers whose files and processes are owned by different unique, unix userids?
If not, how would you separate access to each of the Managed Servers so that the programmers who maintain them don't have access to Managed Servers that they are not responsible for?
Thanks for any help or suggestions.....

Hi:
I played with this stuff and I found that this will work, without the Location elements:
<IfModule mod_weblogic.c>
MatchExpression /app1 WebLogicHost=server1|WebLogicPort=7003
MatchExpression /app2 WebLogicHost=server2|WebLogicPort=7003
</IfModule>
Also this will work too, with no entries inside the IfModule element:
<Location /app1 >
SetHandler weblogic-handler
WebLogicHost server1
WebLogicPort 7003
</Location>
<Location /app2 >
SetHandler weblogic-handler
WebLogicHost server2
WebLogicPort 7003
</Location>

Issue listeneing queue from Weblogic Cluster server with multiple managed server

Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
Weblogic Cluster structure is like
Weblogic Cluster01
--ManagedServer01(http://server01.myhost.com:7001)
--ManagedServer02(http://server02.myhost.com:7001)
JMS Servers
JMSserver01 targeting: ManagedServer01
JMSserver02 targeting: ManagedServer02
JMSmodule
ConnectionFactory01 targeting:JMSserver01,JMSserver02
UDQueue01 targeting:JMSserver01,JMSserver02
Uniform Distributed Queue in Monitoring tab showing like this
mysystemmodule!JMSserver01@UDQueue01
mysystemmodule!JMSserver02@UDQueue01
So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
mysystemmodule!JMSserver01@UDQueue01 10
mysystemmodule!JMSserver02@UDQueue01 10
But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
mysystemmodule!JMSserver01@UDQueue01 0
mysystemmodule!JMSserver02@UDQueue01 10
untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
Solutions that tried
1) we have tried give both server URL coma sparated in provider URL
we need to configur same scenario for 5 managed server with 3 listener on other servers.
Do any one have solution for this.

You need to have:
1. Consumers connected to each UDQ member
OR
2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
For example you can set it to 10 (10s)
Additional Information here:
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
I hope this helps
Best Regards
Luz

BSPs configuration with multiple apps servers

Hi Masters,
This is regrarding configure ICM and BSPs on our production box with multiple application servers.
We have our production box in a cluster environment.
The central instance is dbciSAP and apps servers are sapaps2 thru sapaps6. The database is on shared disks. Whenever the central instance fails sapaps2 takes the control and become as dbciSAP but the main dbciSAP never become a application server when ever sapaps2 acts as dbciSAP. Since we have configured load balancing concept in production environment the users can login to system thru any application server. This is waht our environment.
As part of our production box to SAP 4.7 upgrade from 4.6C, we are asked to configure the environment to deploy BSPs. We have successfully configured and deployed the BSPs in our DEV and QAS system (Both are central instances with no application servers) except production box which is due in the next month.
The process we follow to activate BSPs is as follows:
1.Define an ICM service port in /etc/services file.
2.Add the ICM related parameters in instance profiles.
3.Make sure the ICM status is active in SMICM tx.
4.Activate the BSP services in SICF as per OSS note 571484.
Now, the question is how to configure the same ICM service and activate the BSPs since we have multiple multiple application servers.
Subsequently What I am enquirying is:
Do I need to define ICM service ports on each and every hosts where the application servers are running?
Do I need to make changes to each and every instance profile of the application server?
What are the differences in configuring ICM services on central instance and application instances?
Appreciate any help in this regard.
Thanks and Regards
Murty Patchipala

Grasshopper,
I think what you should really read up on is the SAP WebDispatcher. If are serious about running BSP/ICM across multiple app servers, this is the key technology:
http://help.sap.com/saphelp_nw04/helpdata/en/42/5cfd3b0e59774ee10000000a114084/frameset.htm This may also answer some of your questions about profile parameters.
Other than that I can share what we did. We did activate the ICM and services on all app servers and central instance. The service ports of the individual servers aren't that important now because of the WebDispatcher (at least they aren't visible to the user).
Yes we did make some of the ICM profile changes in each instance profile. If your settings are the same, consider using the default profile. Are their particular settings you are interested? I will look over ours, but I don't remember any huge differences from APP server to Central Instance.

Problem while connecting the Weblogic Domain to MySql5.

Hi,
I would like to send you the entire stacktrace..
JAVA Memory arguments: -Xms256m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=192m
WLS Start Mode=Development
CLASSPATH=;C:\WEBLOG~1\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\patch_wlp1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\patch_cie670\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\JDK160~1\lib\tools.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\weblogic.jar;C:\WEBLOG~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\webservices.jar;C:\WEBLOG~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\WEBLOG~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\WEBLOG~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\xqrl.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\xquery.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\binxml.jar;
PATH=C:\WEBLOG~1\patch_wlw1030\profiles\default\native;C:\WEBLOG~1\patch_wls1030\profiles\default\native;C:\WEBLOG~1\patch_wlp1030\profiles\default\native;C:\WEBLOG~1\patch_cie670\profiles\default\native;C:\WEBLOG~1\patch_cie660\profiles\default\native;C:\WEBLOG~1\WLSERV~1.3\server\native\win\32;C:\WEBLOG~1\WLSERV~1.3\server\bin;C:\WEBLOG~1\modules\ORGAPA~1.5\bin;C:\WEBLOG~1\JDK160~1\jre\bin;C:\WEBLOG~1\JDK160~1\bin;C:\WebLogicBea\jrockit_160_05\jre\bin;E:\Oracle\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;F:\Oracle\Ora81\bin;C:\Program Files\Oracle\jre\1.1.7\bin;F:\Oracle\Ora81\orb\bin;C:\Program Files\Java\jdk1.5.0_06\bin;E:\Oracle\orb\bin;C:\WEBLOG~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Cleaning up license and uid files
Starting Autonomy with CONTENT_SEARCH_OPTION = full
Autonomy Distributed Search Handler engine started.
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\WEBLOG~1\JDK160~1\bin\java -client -Xms256m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=192m -Xverify:none -da -Dplatform.home=C:\WEBLOG~1\WLSERV~1.3 -Dwls.home=C:\WEBLOG~1\WLSERV~1.3\server -Dweblogic.home=C:\WEBLOG~1\WLSERV~1.3\server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=C:\WEBLOG~1\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\WEBLOG~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\WEBLOG~1\patch_wlp1030\profiles\default\sysext_manifest_classpath;C:\WEBLOG~1\patch_cie670\profiles\default\sysext_manifest_classpath;C:\WEBLOG~1\patch_cie660\profiles\default\sysext_manifest_classpath;C:\WebLogicBea\wlportal_10.3\p13n\lib\system;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system;C:\WebLogicBea\wlportal_10.3\portal\lib\system;C:\WebLogicBea\wlportal_10.3\info-mgmt\lib\system;C:\WebLogicBea\wlportal_10.3\analytics\lib\system;C:\WebLogicBea\wlportal_10.3\apps\lib\system;C:\WebLogicBea\wlportal_10.3\info-mgmt\deprecated\lib\system;C:\WebLogicBea\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=C:\WebLogicBea\wlportal_10.3\portal\lib\security -Dweblogic.Name=AdminServer -Djava.security.policy=C:\WEBLOG~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<Oct 27, 2009 11:15:35 AM IST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\WebLogicBea\wlportal_10.3\analytics\lib\system\analytics_sys.jar;C:\WebLogicBea\wlportal_10.3\apps\lib\system\groupspace_system.jar;C:\WebLogicBea\wlportal_10.3\content-mgmt\lib\system\content_system.jar;C:\WebLogicBea\wlportal_10.3\info-mgmt\deprecated\lib\system\commerce_system.jar;C:\WebLogicBea\wlportal_10.3\info-mgmt\lib\system\wlp-schemas.jar;C:\WebLogicBea\wlportal_10.3\info-mgmt\lib\system\wlp_content_system.jar;C:\WebLogicBea\wlportal_10.3\info-mgmt\lib\system\wps_system.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\netuix_common.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\netuix_schemas.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\netuix_system.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\wsrp-client.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\wsrp-common.jar;C:\WebLogicBea\wlportal_10.3\p13n\lib\system\p13n-schemas.jar;C:\WebLogicBea\wlportal_10.3\p13n\lib\system\p13n_common.jar;C:\WebLogicBea\wlportal_10.3\p13n\lib\system\p13n_system.jar;C:\WebLogicBea\wlportal_10.3\p13n\lib\system\wlp_services.jar;C:\WebLogicBea\wlportal_10.3\portal\lib\system\netuix_system-full.jar>
<Oct 27, 2009 11:15:35 AM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<Oct 27, 2009 11:15:36 AM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR376251 Wed Aug 06 09:19:34 PDT 2008
WebLogic Server Temporary Patch for CR371247 Sat Aug 09 20:10:38 PDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR376759 Thu Aug 14 14:53:02 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<Oct 27, 2009 11:15:42 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 27, 2009 11:15:42 AM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Oct 27, 2009 11:15:42 AM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\WebLogicBea\user_projects\domains\zarDbDomain\zarDbDomain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Oct 27, 2009 11:15:57 AM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 27, 2009 11:16:10 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Oct 27, 2009 11:16:10 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 27, 2009 11:16:40 AM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.9.200.236:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 27, 2009 11:16:41 AM IST> <Warning> <Server> <BEA-002611> <Hostname "ZieF.pl", maps to multiple IP addresses: 192.9.200.236, 127.0.0.1>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "zarDbDomain" running in Development Mode>
<Oct 27, 2009 11:16:41 AM IST> <Warning> <Server> <BEA-002611> <Hostname "192.9.200.236", maps to multiple IP addresses: 192.9.200.236, 127.0.0.1>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Oct 27, 2009 11:17:18 AM IST> <Error> <Security> <BEA-090064> <The DeployableAuthorizer "myrealm_weblogic.security.providers.xacml.authorization.XACMLAuthorizationProviderImpl" returned an error: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource.>
<Oct 27, 2009 11:17:20 AM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1256622425468' for task '0'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(netuix.jar)
Unable to deploy EJB: ProxyPagePersistenceManager from netuix.jar:
Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
weblogic.application.ModuleException: Exception preparing module: EJBModule(netuix.jar)
Unable to deploy EJB: ProxyPagePersistenceManager from netuix.jar:
Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
weblogic.ejb20.interfaces.PrincipalNotFoundException: Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
at weblogic.ejb.container.internal.SecurityHelperWLS.deployPolicy(SecurityHelperWLS.java:357)
at weblogic.ejb.container.internal.SecurityHelper.deployPolicy(SecurityHelper.java:306)
at weblogic.ejb.container.internal.SecurityHelper.deployPolicy(SecurityHelper.java:294)
at weblogic.ejb.container.internal.SecurityHelper.deployAllPolicies(SecurityHelper.java:249)
at weblogic.ejb.container.internal.SecurityHelper.deployAllPolicies(SecurityHelper.java:228)
Truncated. see log file for complete stacktrace
<Oct 27, 2009 11:17:20 AM IST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'myPortalEAR'.>
<Oct 27, 2009 11:17:20 AM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(netuix.jar)
Unable to deploy EJB: ProxyPagePersistenceManager from netuix.jar:
Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
weblogic.ejb20.interfaces.PrincipalNotFoundException: Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
at weblogic.ejb.container.internal.SecurityHelperWLS.deployPolicy(SecurityHelperWLS.java:357)
at weblogic.ejb.container.internal.SecurityHelper.deployPolicy(SecurityHelper.java:306)
at weblogic.ejb.container.internal.SecurityHelper.deployPolicy(SecurityHelper.java:294)
at weblogic.ejb.container.internal.SecurityHelper.deployAllPolicies(SecurityHelper.java:249)
at weblogic.ejb.container.internal.SecurityHelper.deployAllPolicies(SecurityHelper.java:228)
Truncated. see log file for complete stacktrace
There is around 140 Tables created in mysql database...
Is there anything wrong ?
Regards
Zarrakh

Well.. When i runned the script for mysql from the weblogic domain configuration and compared the pointbase and mysql database.. i found that there are few tables, views and triggers that are missing in mysql db.. Could you telll me how can i create this missing tables, views and triggeres
Regards

How to configure the .ini file with applet

hai
i am using native methods in that methods they use some ip addresses. when i am using that native methods in applet run the applet using appletviewer tool it works fine but when i am open that applet using html page browser not configure that .ini file data .how to configure that .ini file with browser

Hi Jay SenSharma,
Thanks for your immediate response.
I saw your URL links, But in your link give the recursive deployment using wlst. But my question is how to configure the oracle weblogic library files into Admin server & Managed Servers by using the wls.jar file through wlst script to create the new domain.
But if create the new domain by using GUI mode then we manually give the admin server port number & managed servers port number and name.
By default the library files are configured with the Admin server in GUI mode. But the Managed server the Library files are not configured with the Managed servers. Then we manually select all the library files to the corresponding managed servers. Then only the applications are deployed into the corresponding managed server.
Regards,
S.vinoth Babu

How does OEM monitor the weblogic domain

Hi Guys,
I would like to know how does the OEM monitor the weblogic domain, i.e where does the em agent (in the target host) check to determine if the weblogic domain is up or down ?
- Does OEM fetch data regarding managed server from admin server ?
- Does managed servers show up in OEM if the admin server console is down but the managed server is up ? (i think it does show up, even if the admin is down but then how/where does it get to know the status)
- Is there any settings in the weblogic to be set ?
- Does the behavior of weblogic EM console and the OEM grid console are same ?
Basically want to understand, how and what all needs to check when the domain is showing down in OEM (when domain is up and running in weblogic console and the agent is perfectly fine)
Similarly for the Database how does it check the status "up or down"
- does it try to make a connection to the db ?
- if so where do we give the details for the db connection user and password ?
Please help me in understanding these.
Thanks and Regards,
Harish

If the targets are actually up and showing down in OEM console , so it means something wrong with the configuration .
Can you check the error message in the console , why it is down ? Or you can also check agent logs on the target server.
To monitor the weblogic , it uses username used during the configuration.
Please check the picture at below link :
Discovering Middleware Targets
Enter the WebLogic Administration Server user name and password.If you want to discover the target only for monitoring purposes, then it is sufficient to provide a user name that has a monitoring role. If you want to monitor the target and also perform start/stop operations, then ensure that you provide a user name that has either an operator role or an administrator role.Note: There is the potential of account locking issues if you enter the default WebLogic user name, and the account password is changed without updating the Enterprise Manager monitoring credentials for the Domain and Farm.
Thanks
Rajesh

Re: Precompiling JSP with admin/managed servers

Thanks, but I'm not doing any copying.
          The admin/managed-server communication copies things to the managed server,
          which then always recompiles the pages when hit.
          -Greg
          Check out my WebLogic 6.1 Workbook for O'Reilly EJB Third Edition
          www.oreilly.com/catalog/entjbeans3 or www.titan-books.com
          "Robert Coonrad" <[email protected]> wrote in message
          news:[email protected]...
          >
          > check out post 8366...i found that i was not preserving
          > the lastmodified date on my jsps and this was causing
          > unnecessary re-compilation.
          >
          > hope it helps...
          > bobc
          >
          > "Greg Nyberg" <greg.nyberg.at.objectpartners.com> wrote:
          > >I believe I have exhausted all permutations of EARing/notEARing,
          > >WARing/notWARing, placing precompiled jsp class files in WEB-INF/classes,
          > >placing them in a static location and setting workingDir to that
          location,
          > >combinations of the above.
          > >
          > >No matter what, the managed server re-compiles pages the first time they
          > >are
          > >hit. Non admin/managed-server I have no problems.
          > >
          > >Can anyone from BEA comment on this problem? Or give me a workaround
          > >for
          > >getting a cluster working with precompiled jsps?
          > >
          > >-Greg
          > >
          > >"Greg Nyberg" <greg.nyberg.at.objectpartners.com> wrote in message
          > >news:[email protected]...
          > >> Grrr... The JSP engine is extremely frustrating! I've spent many hours
          > >> fighting the "staleness" checker in WL. I've been through all of the
          > >> newsgroup messages pertaining to pre-compiling, etc., and I've gotten
          > >> pre-compilation working on single-server deployments, but admin/managed
          > >> server deployments have me beat.
          > >>
          > >> WL6.1, SP1, Solaris
          > >>
          > >> I've done the pageCheckSeconds=-1 and the workingDir is set to a fixed
          > >> place. The fixed place contains pre-compiled versions of all jsps
          > >made on
          > >> that machine using jspc not 20 minutes earlier using the JSP files
          > >in the
          > >> exploded EAR file used by the admin server as the model for managed
          > >> servers.. The managed servers are on the same machine.
          > >>
          > >> When the admin server gives an application to a managed server, the
          > >managed
          > >> server creates a temporary directory containing all of the webapp
          > >> components, etc. The file timestamps on these files is the set by
          > >the
          > >> copying process to the time of the managed server boot (why?!?!????!?),
          > >so
          > >> the staleness check always thinks they are new and could care less
          > >what
          > >> precompiled jsps I have in my workingDir, the WEB-INF/classes
          directory,
          > >or
          > >> anywhere else. The pageCheckSeconds=-1 seems to be completely ignored
          > >in
          > >> this scenario.
          > >>
          > >> If I tell the managed server to precompile everything on boot (about
          > >45
          > >> minutes for this app) it will create versions of the classes that match
          > >th
          > >e
          > >> new JSP file timestamps, but this does not even survive a reboot of
          > >the
          > >> managed server because it AGAIN creates a new temp version of
          everything
          > >on
          > >> the next reboot with new timestamps.
          > >>
          > >> If I wait for the managed server to boot and find the directory like
          > >> .../applications/.wlnotdelete_man1/wlap7336/webapp/... and physically
          > >copy
          > >> (via cp -pr to retain timestamps) all of the original webapp components
          > >on
          > >> top of the temp versions, the staleness checker is happy and the
          > >> pre-compiled versions work fine.
          > >>
          > >> There HAS to be a way to package pre-compiled versions of the JSPs
          > >in the
          > >> "model" application in the admin server and keep from having to
          precompile
          > >> the JSPs on every managed server every time managed server is booted..
          > >>
          > >> It would help if we had a way to bypass the staleness checking
          > >completely..
          > >> Or you guys should make the timestamps on the files copied by the
          > >> admin/managed deployment process match properly so the staleness
          checker
          > >> doesn't think the JSP is different.
          > >>
          > >> It would also help if the engineer who wrote this could explain the
          > >rules
          > >> being implemented by the staleness checker. So far all the messages
          > >in
          > >the
          > >> newsgroup have amounted to point solutions for problems without a good
          > >> understanding of what the engine is checking for and/or doing under
          > >the
          > >> covers. Looking at the generated .java files for the JSP pages helps,
          > >but
          > >> it is not good enough...
          > >>
          > >> Anyone out there have a working admin/managed server JSP application?
          > >> -Greg
          > >>
          > >> -----------------------------------------------------------
          > >> Check out my WebLogic 6.1 Workbook for O'Reilly EJB Third Edition
          > >> www.oreilly.com/catalog/entjbeans3 or www.titan-books.com
          > >>
          > >>
          > >>
          > >
          > >
          >


The admin/managed-server communication copies things to the managed server, which then always recompiles the pages when hit.
          This is a known issue and is fixed. The timestamps of the compiled classes was not being preserved when extracted from the war file used to distribute to the managed servers. This will be available in WLS6.1 Service Pack 3 - and there is a temporary patch available for SP2. Please ask your friendly BEA support person for it (you can refer to CR058946)
          I'd give you the patch myself, but they like to keep track of these things...
          Regards,
          Alex
          "Girish" <[email protected]> wrote in message news:[email protected]...
          >
          > "Aditya Kiran Gavvala" <[email protected]> wrote:
          > >Greg,
          > >
          > >I have been following your posts, because our application deployment
          > >ran
          > >into exact same problem you ran into. I had spent a full two days
          > >researching into the problem. And I figured the solution. Hope this
          > >helps.
          > >
          > >Here are my discoveries:
          > >
          > >The following applies only to the following environment:
          > >OS: Linux (perhaps for Win/Unix/Solaris etc)
          > >WLS 6.0 SP2 ( no rolling patches): I found Rolling Patch2 (RP2) not useful
          > >for this problem.
          > >Clustered environment with Admin/Managed servers
          > >
          > >- When you compile JSP using weblogic.jspc compiler it puts the JSP file
          > >timestamp into the compiled class. You can see it in the generated java
          > >file
          > >(you need to supply -keepgenerated switch to jspc)
          > >
          > >- When a request is made to a JSP page after the application is deployed,
          > >it
          > >seems to be retrieving this timestamp from the compiled class file and
          > >comparing it with the JSP file timestamp. If they dont match a compile
          > >command gets run by the server. Thereby you see a compile happening at
          > >run
          > >time.
          > >
          > >- If you have exploded directory deployment, when you start the managed
          > >servers they create a ".war" file (under some temp dir) with all the
          > >JSP
          > >source files going into the file. You can notice this by looking into
          > >the
          > >server log file. Therefore all JSP source files get a brand new timestamp
          > >in
          > >the archive (a timestamp later than what was put class files by
          > >weblogic.jspc). So, the server at run time sees that the timestamp in
          > >the
          > >class file is older than the JSP source file and runs a recompile. So
          > >DONT
          > >DO EXPLODED directory deployment if your environment is as described
          > >in this
          > >post.
          > >
          > >- If you have ".war" file deployment, you will not have a problem. At
          > >the
          > >start up time managed server still creates "".war" file under a temp
          > >directory however it seems to be copying the content of the your ".war"
          > >file. So, the timestamps of JSP remain the same as they were before.
          > >SO NO
          > >RE-COMPILATION.
          > >
          > >- Another important thing to remember is to make sure you specify the
          > >workingDir in the weblogic.xml file. That is where the precompiled class
          > >files should reside. This should be any directory the server uses as
          > >scratch
          > >pad to compile classes or find (pre)compiled classes. This is not a
          > >directory inside your .war file is what I am trying to get at.
          > >
          > >Hope this helps,
          > >Aditya
          > >
          > >"Greg Nyberg" <greg.nyberg.at.objectpartners.com> wrote in message
          > >news:[email protected]...
          > >> Thanks, but I'm not doing any copying.
          > >>
          > >> The admin/managed-server communication copies things to the managed
          > >server,
          > >> which then always recompiles the pages when hit.
          > >>
          > >> -Greg
          > >>
          > >> -----------------------------------------------------------
          > >> Check out my WebLogic 6.1 Workbook for O'Reilly EJB Third Edition
          > >> www.oreilly.com/catalog/entjbeans3 or www.titan-books.com
          > >>
          > >> "Robert Coonrad" <[email protected]> wrote in message
          > >> news:[email protected]...
          > >> >
          > >> > check out post 8366...i found that i was not preserving
          > >> > the lastmodified date on my jsps and this was causing
          > >> > unnecessary re-compilation.
          > >> >
          > >> > hope it helps...
          > >> > bobc
          > >> >
          > >> > "Greg Nyberg" <greg.nyberg.at.objectpartners.com> wrote:
          > >> > >I believe I have exhausted all permutations of EARing/notEARing,
          > >> > >WARing/notWARing, placing precompiled jsp class files in
          > >WEB-INF/classes,
          > >> > >placing them in a static location and setting workingDir to that
          > >> location,
          > >> > >combinations of the above.
          > >> > >
          > >> > >No matter what, the managed server re-compiles pages the first time
          > >they
          > >> > >are
          > >> > >hit. Non admin/managed-server I have no problems.
          > >> > >
          > >> > >Can anyone from BEA comment on this problem? Or give me a workaround
          > >> > >for
          > >> > >getting a cluster working with precompiled jsps?
          > >> > >
          > >> > >-Greg
          > >> > >
          > >> > >"Greg Nyberg" <greg.nyberg.at.objectpartners.com> wrote in message
          > >> > >news:[email protected]...
          > >> > >> Grrr... The JSP engine is extremely frustrating! I've spent many
          > >hours
          > >> > >> fighting the "staleness" checker in WL. I've been through all
          > >of the
          > >> > >> newsgroup messages pertaining to pre-compiling, etc., and I've
          > >gotten
          > >> > >> pre-compilation working on single-server deployments, but
          > >admin/managed
          > >> > >> server deployments have me beat.
          > >> > >>
          > >> > >> WL6.1, SP1, Solaris
          > >> > >>
          > >> > >> I've done the pageCheckSeconds=-1 and the workingDir is set to
          > >a
          > >fixed
          > >> > >> place. The fixed place contains pre-compiled versions of all
          > >jsps
          > >> > >made on
          > >> > >> that machine using jspc not 20 minutes earlier using the JSP files
          > >> > >in the
          > >> > >> exploded EAR file used by the admin server as the model for managed
          > >> > >> servers.. The managed servers are on the same machine.
          > >> > >>
          > >> > >> When the admin server gives an application to a managed server,
          > >the
          > >> > >managed
          > >> > >> server creates a temporary directory containing all of the webapp
          > >> > >> components, etc. The file timestamps on these files is the set
          > >by
          > >> > >the
          > >> > >> copying process to the time of the managed server boot
          > >(why?!?!????!?),
          > >> > >so
          > >> > >> the staleness check always thinks they are new and could care
          > >less
          > >> > >what
          > >> > >> precompiled jsps I have in my workingDir, the WEB-INF/classes
          > >> directory,
          > >> > >or
          > >> > >> anywhere else. The pageCheckSeconds=-1 seems to be completely
          > >ignored
          > >> > >in
          > >> > >> this scenario.
          > >> > >>
          > >> > >> If I tell the managed server to precompile everything on boot
          > >(about
          > >> > >45
          > >> > >> minutes for this app) it will create versions of the classes that
          > >match
          > >> > >th
          > >> > >e
          > >> > >> new JSP file timestamps, but this does not even survive a reboot
          > >of
          > >> > >the
          > >> > >> managed server because it AGAIN creates a new temp version of
          > >> everything
          > >> > >on
          > >> > >> the next reboot with new timestamps.
          > >> > >>
          > >> > >> If I wait for the managed server to boot and find the directory
          > >like
          > >> > >> .../applications/.wlnotdelete_man1/wlap7336/webapp/... and physically
          > >> > >copy
          > >> > >> (via cp -pr to retain timestamps) all of the original webapp
          > >components
          > >> > >on
          > >> > >> top of the temp versions, the staleness checker is happy and the
          > >> > >> pre-compiled versions work fine.
          > >> > >>
          > >> > >> There HAS to be a way to package pre-compiled versions of the
          > >JSPs
          > >> > >in the
          > >> > >> "model" application in the admin server and keep from having to
          > >> precompile
          > >> > >> the JSPs on every managed server every time managed server is
          > >booted..
          > >> > >>
          > >> > >> It would help if we had a way to bypass the staleness checking
          > >> > >completely..
          > >> > >> Or you guys should make the timestamps on the files copied by
          > >the
          > >> > >> admin/managed deployment process match properly so the staleness
          > >> checker
          > >> > >> doesn't think the JSP is different.
          > >> > >>
          > >> > >> It would also help if the engineer who wrote this could explain
          > >the
          > >> > >rules
          > >> > >> being implemented by the staleness checker. So far all the messages
          > >> > >in
          > >> > >the
          > >> > >> newsgroup have amounted to point solutions for problems without
          > >a
          > >good
          > >> > >> understanding of what the engine is checking for and/or doing
          > >under
          > >> > >the
          > >> > >> covers. Looking at the generated .java files for the JSP pages
          > >helps,
          > >> > >but
          > >> > >> it is not good enough...
          > >> > >>
          > >> > >> Anyone out there have a working admin/managed server JSP application?
          > >> > >> -Greg
          > >> > >>
          > >> > >> -----------------------------------------------------------
          > >> > >> Check out my WebLogic 6.1 Workbook for O'Reilly EJB Third Edition
          > >> > >> www.oreilly.com/catalog/entjbeans3 or www.titan-books.com
          > >> > >>
          > >> > >>
          > >> > >>
          > >> > >
          > >> > >
          > >> >
          > >>
          > >>
          > >
          > >
          >
          [att1.html]

Integrating BIP with multiple LDAP servers

Hi,
my question is very simple. In Admin->Security Configuration->Security Model section i've setted Security model combobox with LDAP value. Then i've filled all LDAP information field (for example:URL). All works. But in my rpd i 've multiple LDAP servers (multiple URL) and in the form i can insert information about only one LDAP server.
Is it possible configure BIP with multiple LDAP servers?
Thanks
Giancarlo
P.S. I'm using OBIEE 10g

Hi,
my question is very simple. In Admin->Security Configuration->Security Model section i've setted Security model combobox with LDAP value. Then i've filled all LDAP information field (for example:URL). All works. But in my rpd i 've multiple LDAP servers (multiple URL) and in the form i can insert information about only one LDAP server.
Is it possible configure BIP with multiple LDAP servers?
Thanks
Giancarlo
P.S. I'm using OBIEE 10g

How can I convert string to the record store with multiple records in it?

Hi Everyone,
How can I convert the string to the record store, with multiple records? I mean I have a string like as below:
"SecA: [Y,Y,Y,N][good,good,bad,bad] SecB: [Y,Y,N][good,good,cant say] SecC: [Y,N][true,false]"
now I want to create a record store with three records in it for each i.e. SecA, SecB, SecC. So that I can retrieve them easily using enumerateRecord.
Please guide me and give me some links or suggestions to achieve the above thing.
Best Regards

Hi,
I'd not use multiple records for this case. Managing more records needs more and redundant effort.
Just use single record. Create ByteArrayOutputStream->DataOutputStream and put multiple strings via writeUTF() (plus any other data like number of records at the beginning...), then save the byte array to the record...
It's easier, it's faster (runtime), it's better manageable...
Rada

Application Server slowdown with multiple proxy servers ?

Our environment has our iAS boxes talking to iWS web servers which are front-ended with iPlanet Proxy servers (Proxy 3.53 I believe). We are seeing significant slowdown if we try and hit our web apps through the proxy as opposed to going directly to the web server (bypassing the proxy servers). One of our "proxy" guys recalls hearing that there is an issue with the app server's handling of sessions if requests from the same user come in to the web server (and by extension the app server) from multiple proxy servers with different ip's. Has any body ever encountered this or does any body know if the app server has an issue handling the same sessions whose requests come from different ip addresses (different proxies)?

The proxy work with HTTP 1.0 and the webserver with HTTP 1.1.
This difference could be the cause of your problems.
"David Fuelling" <[email protected]> escribio en el mensaje
news:[email protected]..
Our environment has our iAS boxes talking to iWS web servers which are
front-ended with iPlanet Proxy servers (Proxy 3.53 I believe). We
are seeing significant slowdown if we try and hit our web apps through
the proxy as opposed to going directly to the web server (bypassing
the proxy servers). One of our "proxy" guys recalls hearing that
there is an issue with the app server's handling of sessions if
requests from the same user come in to the web server (and by
extension the app server) from multiple proxy servers with different
ip's. Has any body ever encountered this or does any body know if the
app server has an issue handling the same sessions whose requests come
from different ip addresses (different proxies)?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Session cleanup issue with multiple Application servers

Hi ,
I am facing a strange problem with multiple application servers. The java Webdynro session does not get cleaned up completely when user closes the browser ( without using logoff ). On re-login it gets handle of old session and then fails for consecutive view on other webdynpro iviews with an invalid session error. It again starts working with a refresh event.
Any ideas/suggestion if you have seen something similar before ?
Thanks and regards,
Amit.

Hi Amit
It seems that issues is not server related, but caused by your client browser. I know, for example, that IE8.0 keeps user session even if two separate browser instances opened on the same client machine. IE 7.0 and lower behave differently - they are separate user sessions per browser instance.
BR, Siarhei

Problem with discovering Managed Servers

Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server everything
seems to be ok (the directive: Starting discovery of managed server... appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

Sorry,
i cannot stop those managed server - in Control tab I have active only option
to start those server but they are running. In logging tab when I want to browse
the log the message that probably this server is not running appear. However in
the tab when all servers are listened there is a message that they are running
"Michal" <[email protected]> wrote:
>
Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server
everything
seems to be ok (the directive: Starting discovery of managed server...
appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in
a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

BAPI_GOODSMVT_CREATE, will do the goods receipt ( MB01 )for the subcontracting PO with batch management.

Dear Professionals ,
I Just want to confirm that whether BAPI "BAPI_GOODSMVT_CREATE " will do the goods receipt ( MB01 ) for the subcontracting PO with batch management.
Since I will be passing only 101 mvy type in BAPi, will the system automatically call 543 mvt type with batch management and post the consumption.
can I change the batch of the component items ?

Hi ,
Delivery note is like a ref document number
so you can use the
In the BAPI_GOODSMVT_CREATE There is header structure BAPI2017_GM_HEAD_01 which has a field REF_DOC_NO
you can pass the delivery note value to that field .
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jul 10, 2008 3:41 PM

Configuring the weblogic domain with multiple managed servers(SOA)

Similar Messages

Maybe you are looking for