Conflicting information over availability of BT In...

I live in St Austell, which is one of the 6 pilot areas for FTTP and according to recent press releases it has already gone live but when I look around all I am seeing is conflicting information.
According to the line checker at the BT Infinity page I am not in an area that is enabled yet for fibre optic and Sam Knows says St Austell won't be getting FTTC until December of 2012 but if I do the postcode check at BT Wholesale it says FTTC is already enabled... We are about 100m from the nearest cabinet and I saw BT digging up the road outside our house over a month ago.
Currently I'm on an LLU ADSL2 connection through Xilo and the line rental is through Sky, so I don't know if that is confusing matters but I've been unable to get any kind of clear answer from BT on when we are likely to get access to a fibre optic connection and whether it will be FTTP or FTTC. It could be a week or it could be a year... Since I work from home via the internet a genuinely fast unlimited broadband connection is something I'd like to see enabled as soon as possible.
Is there any way to cut through all this conflicting information and find out what options we will have and when?

I noticed a person asking for help help identifying the cabinet they are connected to and when/if it's due Infinity.
Dean a BT forum Mod replied and he mentioned "and others".
It might be worth contacting... See Message #13 and the contact form is in #15.
They will probably need address/post code/phone number... anything you can think of that will help them to identify your location.
It may take 72hrs or so to get a reply due their workload.
Note when you use a checker the only way to get an accurate result is by entering a telephone number.... if you have BT line.
The Post code result is only for an area and within that area some cabs have been done and some haven't.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Similar Messages

Third-Party access to AP health-information over 5508 controller

Hello,
Situation:
Third-Party Tool (Whats up gold) has connectivity to a 5508 controller, only.
There is no connectivity to the remote LAP access-points from the third-party tool.
Is it possiply to get the health information (AP available or not) over a controller via SNMP?
Sven

Just to elaborate on what Steve is saying:
The SNMP monitoring of APs is still through the WLC itself. You would be pulling this information out of the WLC not via reachability to the AP itself from your tool.
Or you could use Whatsup for just an IP reachability (ping) of the AP which would require interaction with the WLC.
Can Whatsup be a trap receiver? I believe the WLC will send TRAPs for AP up/down events which I would think you could query off of.....

Characteristics Remittance information not available in infoprovider

Hi All,
When I run query from portal it get error : 500 Internal Server error Bex Web Application
FAILED TO PROCESS REQUEST, CONTACT YOUR SYSTEM ADMINITRATOR
ROOT CAUSE:
Characteristics Remittance information not available in infoprovider
ABEND BRAIN(635) QUERY COULD NOT BE OPENED.
NOTE: THIS QUERY RUNS ON MULTIPROVIDER., ANY URGENT HELP WILL BE APPRECIATED, POINT WILL BE ASSIGNED
Thanks in advance
Hunna

Hi,
Try activating multiprovider and underlying infocubes, using following programs.
Multiprovider: RSDG_MPRO_ACTIVATE
Infocube: RSDG_CUBE_ACTIVATE
DSO: RSDG_ODSO_ACTIVATE
InfoObject: RSDG_IBOJ_ACTIVATE
Then try to run the query, alternately you can use transaction RSRT.
Regards,
Durgesh.

The Operation could not be completed. No other information is available about the problem.

MAC OSX 10.8.5
Processor 2.7 GHz
Memory 4GB1333 MHz DDR3
Logic Pro 9.1.8 (1700.67) 32 BIT
"The Operation could not be completed. No other information is available about the problem."
Uploaded on google drive a series of project files. downloaded them and now the message above is what pops up effectively blocking me from my work. After talking with google support, they confirmed the successful upload and download with no file corruption. All file extensions are the same. Can someone please help.
Sincerely,
Butta Love

Try the following..
Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
Download from Google and then decompress audio files..
Now test in Logic and see if you get the same issue....

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."

every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."

Open the iCloud preference pane and uncheck the Contacts box. Do the alerts stop?

Contacts application error: The Operation could not be completed. No other information is available about the problem.

I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

Try the following..
Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
Download from Google and then decompress audio files..
Now test in Logic and see if you get the same issue....

Contacts error: The Operation could not be completed. No other information is available about the problem.

I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

Thanks! I looked at the Busycal post:
          To fix this, open System Preferences > Security & Privacy, select Contacts in the left sidebar, then check BusyCal.app.
On my system, only Skype, Parallels, and Contacts Cleaner are enabled to access contacts.
FYI, LinkedIn doesn't list any apps as having asked for, or been given access.
          If that doesn't work, here is a bigger hammer:
OK
          1) Launch Terminal in /Applications/Utilities.
          2) Paste the following text and hit return:
               tccutil reset AddressBook
First, I want to see what that does so I ran man tccutil
     NAME
          tccutil -- manage the privacy database
     SYNOPSIS
          tccutil command service
     DESCRIPTION
          The tccutil command manages the privacy database, which stores decisions the
          user has made about whether apps may access personal data.
          One command is current supported:
          reset    Reset all decisions for the specified service, causing apps to prompt
                   again the next time they access the service.
     EXAMPLES
          To reset all decisions about whether apps may access the address book:
                tccutil reset AddressBook
          3) Quit Terminal.
          4) Launch BusyCal, and click OK when asked whether to allow access to your contacts.
Now I see under System Preferences->Security&Privacy->Privacy->Contacts that all apps were removed from the list.
I haven't had BusyCal in years so I just launched Calendar and Contacts.
Unfortunately, as soon as I launch Contacts, I get the pop-up again about the LinkedIn

I movie "The operation could not be completed. No other information is available about the problem." any suggestions?

Bought i movie for my macbook pro. it crashed, now i can't use it "The operation could not be completed. No other information is available about the problem." any suggestions?

Same problem!

HT201269 I have upgraded to the iPhone 5s and I have transferred all information over but I do not know how to transfer the phone service. Please help

I have upgraded to the iPhone 5s and I have transferred all information over but I do not know how to transfer the phone service. Please help

The phone should have activated when you set the device up. If it didnt, contact your carrier

An error has occurred. Further information is available in the server log.

I been trying for days to access Secondlife.com but when i do i get this message''An error has occurred. Further information is available in the server log. '' now i can use Chorme and firefox to go to the site but not firefox plus fireofx is searching for second life on my C drive and Customer service for second life said they don't know why Firefox is Searching for Second life on my c-drive.. Can you please help me
Thank you very much

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Howto get information about available queues?

Any ideas how to get information about available queues on a Weblogic Server to browse them?
          When you have the jndi namespace and the name of the queue it's no problem to browse that queue, but when you don't have the name of the queue is there a way to still be able to browse the queue(s)?
          Any information is warmly welcomed.
          Thanks,
          Chris

A QueueBrowser is currently the only way to view message contents. WebLogic 9.0 (out in beta now), provides comprehensive message management both via console and JMX.
          For 8.1, the following links may help get you started.
          JMS technology page:
          http://dev2dev.bea.com/technologies/jms/index.jsp
          WebLogic public management/monitoring APIs:
          http://edocs.bea.com/wls/docs81/jmx/index.html
          jsp based dest browser (which ultimately uses a QueueBrowser):
          http://dev2dev.bea.com/codelibrary/code/jmsdest.jsp
          JMS statistics dump:
          http://dev2dev.bea.com/codelibrary/code/jms_stats.jsp
          Tom Barnes, BEA

HT4515 I want to buy an unlocked 4s from apple and use it permanently on a foreign CDMA cell service (IUSA Cell in Mexico). I am getting conflicting information. Thoughts?

I want to buy an unlocked 4s from apple and use it permanently on a foreign CDMA cell service (IUSA Cell in Mexico). I am getting conflicting information on whether this is possible. Apple website says the phones are unlocked for GSM use only.
I called apple when i bought an Ipad to help decide on a GSM vs CDMA version and was told that if I went to Mexico with a CDMA version of the Ipad (2) that i would call the carrier give them some numbers and they would activate it. When i returned I was to call Verizon and reactivate it in the US. I ultimately got the GSM version so i never tested the theory.
I am now thinking of getting the 4S to use in Mexico permanently but want to use it on a CDMA carrier because it is half the cost per month. But will this work? Thoughts?

There is no such thing as an unlocked CDMA iPhone. All CDMA iPhones are carrier locked and the carriers do not allow unlocking. All legitimatly unlocked iPhones are GSM only The CDMA side is completely disabled in them.
You can only use a CDMA iPhone if the carrier you want to use offers one.

Conflict Resolver Sync Error - Unable to retrieve conflict information from the sync server

So I have been using iTunes with my iPhone 3GS and now my iPhone 4 to sync with my Outlook for many years now and it has been flawless.
I recently bought a new iPad and started syncing it as well.
Now as of late, after every 2 or 3 syncs, I get an error from iTunes displaying the Conflict Resolver and it says there are 42 sync conflicts.
When I try use the Review Now button it shows up and the issues are between my iPhone and Outlook and are only related to contacts.
As soon as I try to choose which record to resolve, the window immediately disappears without giving me a chance to finish and I get another dialog window with the error:
Unable to retrieve conflict information from the sync server.
Please try again the next time the conflict resolver window is presented.
When I try to sync again it seems to be fine. But then after I sync my iPad and theny iPhone again it shows up and it still won't let me resolve the conflicts.
I have tried the following:
1) Rest Sync History on all devices
2) I have had iTunes replace all the contacts on the iPad from iTunes
3) I have changed the conflict resolver to only notify when 50% of the data will be changed
I have had no such luck.
If I add a contact to Outlook or to my iPhone and then sync it seems to be syncing the new addtions correctly. However, I cannot get this issue with this 42 conflicts resolved for some reason. This has been going on for a month now.

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?

iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server.

Conflicting information over availability of BT In...

Similar Messages

Maybe you are looking for