Conformation Cancellation error

Hi
i am trying to cancel one confirmation of which the last operation is Inspection. At this time one error is coming.
Deficit of BA stock in quality inspection.
Please help me as early as possible.
Regards,
Anand

if this tick is there, then the material doc will not be posted, but confi will be reversed. In COGI, this entry will be there which you need to handle later.
I think you will get a pop up screen where it is asking for your confirmation about the material mov. In this you select NO, then the material doc will be posted to COGI transaction in which case you need to handle it later.
Now how to reverse the UR stock to QM stock...you need to refer the note...
it is not stright forward.
The note is
note 33924 Reversing the UD and 175842-QM lot stock reversal
Once it is done, then in COGI, you can post the mov document which is in hold.

Similar Messages

Report for conformation cancelled process orders.

Hi frnds,
I need a report for orders which have got cancelled of confirmation.
plz suggest...
Robert.

Dear,
There is no standard report in SAP which shows Report for conformation cancelled.
But you can check in order it self in COR2 good movement details.
Or check document in MB03
Use CORS to reverse the phases.
After canceling if you want to view it again then use CORT (here there is one check box named 'Reversed' means that phase is reversed).
Or Please use user exit
EXIT_SAPLCORF_404 Process order conf.: Customer specific input checks 2
Regards,
R.Brahmankar

Alpha Conforming Values Error 5323,1461....

Hi All,
I am facing the problem with info object of vendor alpha conforming values error..
I got 53 record errors in PSA level.
Please tell me how to solve this issue.
It's very urgent . plz help to me.
I was checked the Transfer rule alphs Conv check box for vendor.But showing same errors.
Thanks & Regards,
Guna.

Hi,
i am extracting the datafrom R/3 using data source 2lis_05_q0task.
I am getting the error is:-
InfoObject VENDOR does not contain alpa-conforming value 5323.
like that i got few more values like 1461,1561,1643....
Please give me solution how to solve this issue.
Thnaks,
guna
Edited by: gunasekhar raya on Jan 23, 2008 2:25 PM

Code of Conduct - Saving was canceled , error key: RFC_ERROR_SYSTEM_FAILURE

Hi all,
we configured all kinds of ESS scenarions in EP 7.0 Portal.
I get an error, when I try to to this in the Portal:
ESS --> Corporate Information --> Code of Conduct -->
then I check the "I accept..." Button and click on review. Now, when I click Send on the next screen, i get the error message:
Saving was canceled                                                 , error key: RFC_ERROR_SYSTEM_FAILURE:
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      Saving was canceled                                                 , error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:828)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.VcISRButtonsReview.onEvent(VcISRButtonsReview.java:254)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReview.onEvent(InternalVcISRButtonsReview.java:196)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.VcISRButtonsReviewInterface.onEvent(VcISRButtonsReviewInterface.java:164)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReviewInterface.onEvent(InternalVcISRButtonsReviewInterface.java:148)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReviewInterface$External.onEvent(InternalVcISRButtonsReviewInterface.java:228)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:533)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:951)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1114)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.VcISRButtonsReview.submitForm(VcISRButtonsReview.java:233)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReview.submitForm(InternalVcISRButtonsReview.java:188)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.ButtonsReviewView.onActionSubmit(ButtonsReviewView.java:151)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalButtonsReviewView.wdInvokeEventHandler(InternalButtonsReviewView.java:161)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:779)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:714)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1255)
     at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException:      Saving was canceled                                                 , error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.pcui_gp.isr.isrprocessevent.model.IsrModel.isr_Process_Event_Wd(IsrModel.java:406)
     at com.sap.pcui_gp.isr.isrprocessevent.model.Isr_Process_Event_Wd_Input.doExecute(Isr_Process_Event_Wd_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 65 more
Can anyone help us out with this problem??
Many thanks and best regards,
Jasmin

hi
jasmin,
Could you check if the RFC user in R\3. and the connection that exists b/w EP and R\3.
You are getting this error due to the connection error between the two system.
Check if this is configured correctly and is working.
Thanks
Santoshi

"Submit cancelled" error

Can someone please help me figure out why I keep getting a "Submit Cancelled" error when clicking the Submit button (Master Page)?
After the preSubmit script verifies that required fields (first page only) are filled in, it should generate an email, but "Submit Cancelled" stops everything.
Document has been posted at https://acrobat.com/#d=7Uqs6BsWpNjJzrz9k79m0g
Thanks! ~Carol

Niall -
The size of the graphic is very small, but I can take it down more, so will do that.
But it's obvious that embedding the two fonts is the biggest culprit - I didn't realize. The end user requested a distinctive font for responses, which is why I chose Courier, which they like. I just assumed Arial and Courier were very common, as most agencies completing the form will not have many extras on their computers. What would you suggest? Or would I be safe to just stay with those two and not embed?
Srini assisted me with the preSubmit even code to control the Subject, Message and Email addresses so I could customize the subject and message body, which is why there is nothing in the Submit to URL spot.
So now, with no fonts embedded and (temporarily) no graphic, the form size went down from 1,983 KB to 53 KB (wow!!), but I still get the "Submit Cancelled" error message.
The original is still at https://acrobat.com/#d=7Uqs6BsWpNjJzrz9k79m0g
The smaller version with no fonts embedded is at https://acrobat.com/#d=XX9YGkyp81nqkitAiGQ9-w
Thanks (yet again)! ~Carol

Abode X "Scanning Canceled" error

I am using Windows 7 (64 bit), my scanner is HP ScanJet 5590 with the latest drivers (64 bit).
I upgraded to Adobe X last week, every time I try to scan using the WIA scan option a screen flashes too fast to read and then the "Scanning Canceled" error message (Adobe's spelling not mine) pops up. I have found that if I use the TWAIN scan option that I can get it to work, I prefer the WIA as the B & W image handling is better and file size smaller. TWAIN B & W is illegible and I am forced to use color.
Why won't the WIA scan option work?
It worked just fine in Adobe 9 with all of the same drivers and operating system. Given that, it seems to be an Adobe X problem not an HP driver issue.
I downloaded the HP scanner diagnostic and ran that, comes up clean.
Any ideas? I see that I am not the only one.

Hello Lary
Try this steps.. hope it will work
1: Go to Create >> PDF from Scanner >> Custom Scan
2: Select the scanner from Scanner dropdown button.
3: Click on button "Options" next to scanner dropdown list.
4: In the User interface, select Show Scanner's Native Interface.
5: Now click on Scan button.
You will be shown the manufacturer's UI now wherein you can specify if you want to preview the image and select the desired area for scan.
or
maybe Trick is in selecting flat bed or paper feeder. Last is default.
In configuring pre-sets after selecting the scanner choose options.
Make sure it is set to native modus and show scanner interface. Save this.
Try adapted scan first, lets you choose between the flat bed or the paper feed.
Brings you to scanner's interface and scans.
Next time just select the scan function you want (not adapted).
Brgds,
Creator M.P.
www.apartmani-vrtlici.com

Action Cancelled error

I've created a BSP iview connected to a backend r/3 system. We have
Portal server > f5 load balancer-> r/3 landscape.
With some frequency, we get an "Action Canceled" error. Sometimes as soon as somebody clicks on the iview, sometimes after they have been using it for a minute or two, and sometimes they don't get it at all.
I basically have 2 questions: 1) What tools do you know of that will help debug this issue 2) Has anybody else experienced this problem.

hey scott,
Could you please elaborate how the issue was resolved.
I have a similar problem here.
Thanks
rocky

ASN Cancel Error : RCV_ASN_NOT_ACCEPT, RCV_NO_MATCHING_ASN

Hi All,
I am getting below error at the time of cancelling ASN through API.
"ASN Not Cancelled Error: Shipment ASN-6370 does not have matching ASN. Error: All ASN lines for shipment ASN-6370 failed. Either the profile ' RCV: Fail All ASN Lines if One Line Fails' is set to Yes, or all of them belong to single LPN group id, or each line contains an error."
I have checked for ASN profile ' RCV: Fail All ASN Lines if One Line Fails', It Is No. Also I have checked with all values which are correct like organization and all.
Appreciate immediate reply.
Thank You,
Ravi Raj.

Ravi,
I don't see any similar issues reported internally so please log a SR for this issue.
Thanks,
Hussein

Order cancellation error

Dear Gurus,
While cancellation of the conformation for an order i am getting a error, "KI : 249 : Enter only one true account assignment."
The order has been created in ZMTS order type by mistake insted of ZMTO. There is assignment of sales order in this order as it is triggered from a sales order.
Other than its being a MTS order I dont see any irregularity in the order. (Cancellation is triggering 262 movement as material was backflushed while confirmation)
What do I need to do so that the confirmation can be reversed and order can be deleted.
Thanks in advance
Sumeet

Any answer please..
Sumeet

"Open project was cancelled" Error Message

When I try to open any RoboHelp X5 projects, I receive the
following error:
Open project was cancelled or the application was unable to
load database for "C:\Documents and
Settings\jdoe\Desktop\Project_Name\Project_Name.cpd"
The only change I've made recently that may have affected
RoboHelp is that I installed SQL Server last month... maybe it
messed up the database configuration.
I've done the following and have run out of ideas:
* Disabled SQL Server
* Uninstalled SQL Server
* Deleted the .cpd file for a project
* Attempted to open a project using the .hhp file
* Uninstalled and reinstalled RoboHelp
I'd greatly appreciate any suggestions.
Mary

I know some great bars! Far more fun than fixing this but I
guess you have to.
Was RH reinstalled with your logon (the one you are using
now) and did that have admin rights attached. If it was installed
by an IT person with their logon, start again.
Try trashing the CPD and the XPJ.
Try creating a new project, saving it and reopening it. If
that works, also create a printed output from it.
There are topics on my site about installing RH and opening
corrupt projects.
Let us know how that all goes.

"The query was cancelled" error after upgrade from 10.1.3.3.3 to 10.1.3.4.2

Hi,
I was using OBIEE 10.1.3.3.3 /. After upgrading to 10.1.3.4.2 , the queries are not running ( long running queries alone) as expected. and so all the campaigns iwh tlong running queries are cancelled and the error message is seen in the xml log in Marketing jobs management.
We have upgraded the OBIEE version from 10.1.3.3.3 to 10.1.3.4.2 yesterday after which the connectivites have been checked with SQLPLUS and they are working fine. But when the campaign has been loaded, the Analytics have received the request for the segment query and after longer run, the task has been cancelled with the error message "The Query was cancelled as mentioned below in the Job Stats
<jobStats>
<jobID>2</jobID>
<jobType>WriteListFiles</jobType>
<jobUser>userid</jobUser>
<jobState>Error</jobState>
<jobTotalMilliSec>1h 41m 21s 160ms</jobTotalMilliSec>
<jobStartedTime>2012-03-22T08:06:13Z</jobStartedTime>
<jobFinishedTime>2012-03-22T09:47:34Z</jobFinishedTime>
<jobIsCancelling>N</jobIsCancelling>
- <exception>
<message>Job request of type "WriteListFiles" failed.</message>
- <exception>
<message>Error executing the list generation SQL.</message>
- <exception>
<message>Error in executing cursor for WorkNode (Id:0)</message>
- <exception>
<message>The query was cancelled.</message>
</exception>
</exception>
</exception>
</exception>
</jobStats>
Please let us know the suggestions
So far, the unaccessedtimingrunoutminutes tag has been tried to set 50 under ODBC tag in instanceconfig.xml. and the defaulttimeoutminutes has been tried to set to 150 in the same instanceconfig.xml.
along with that the rpd changes are done. For all the users apart from the Administrator, the timeout has been changedfrom 10 minutes to 150 minutes. But still that way is not working.
The segments was fired with the Administrator login. So , if the timeout for admin login can be set, i assume that the problem might be solved. Please let us know ur suggestions here too.
If that is the case, when we open rpd , only for Administrator user and group, the Permissions button is disabled. So i want to know how to change for Admin user settings in rpd..
Please advice us on the same.
Regards,
Madasamy M.
Edited by: Madasamy Murugaboobathi on Mar 26, 2012 1:40 PM

The issue has been resolved by setting the following parameters
<UnaccessedRunningTimeoutMinutes>120</UnaccessedRunningTimeoutMinutes>
<DefaultTimeoutMinutes>120</DefaultTimeoutMinutes>
<ClientSessionExpireMinutes>120</ClientSessionExpireMinutes>
<ConnectionExpireMinutes>120</ConnectionExpireMinutes>
<UIDefaultTimeoutMinutes>1440</UIDefaultTimeoutMinutes>

Segment release cancellation error

When I attempted to perform "Cancel Release" on segment type ZE1MARAM in ECC6.0, I encountered the following error message: "Error while resetting release of segment ZE1MARAM" I didn't have the problem when I performed the same action in 4.6c. Our Basis team investigated the issue and concluded that this is not a security-related error? Does anybody here have seen this error before? What was the cause and fix?
Thanks,
Ning

Hi,
If you want add a new field..in the menu..segment -> add version..
now you can add a new field...
Thanks
Naren

Billing Document cancellation error

Hi Expert,
Good morning.
Due to the wrong posting CST figure 3% instead of 2%,
I wanted to cancel billing document.
When I am trying VF11 to cancel billing document, System is throwing error " Billing date should be current date always"
can you please let me know where what changes require?
pts will be awarded...
Worm Regards
Manoj

Dear Manoj,
Please enter current date in Billing Date i.e today's date field in transaction VF11 then execute.
I hope this will help you,
Regards,
Murali.

Navigation to the webpage was cancelled Error in Portal

Hi All,
I am getting error Navigation to the webpage was cancelled in SAP Portal when and select few of the
application like SRM Application , Some external HTMl application.
Bala

Hi ,
I hope you are using IE8 browser. This error usually comes when we go from secure to non-secure environment.
i.e. from HTTPS to HTTP .
To resolve this issue you can you below options :
1. Change the IE setting which will allow the navigation from secure to non-secure environment.
2. Use same protocol either HTTP or HTTPS (Basis Team will help you in this )
3. Use correct SSL certificate (Basis Team will help you in this)
The First option is very easy , you just need to change the IE setting , Which is explained in
sapnote 0001427561
Regards,
Piyush

Workflow Canceled Error in Sharepoint 2013

A new SP 2013 installation, one server with SP, WF, etc and the other is simply SQL Server. Went through the installation steps for Workflow including the powershell bits. In designer, I am able to create a simple workflow and select 2013 as the type.
When the workflow is run, is shows internal status is canceled and has the following error text below. Note that I am running the workflow as a basic user, not as a system account.
RequestorId: 55c6990b-c4a6-352c-4a5b-449fc1aecac4. Details: System.ApplicationException: HTTP 401 {"x-ms-diagnostics":["3001000;reason=\"There has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["55c6990b-c4a6-352c-4a5b-449fc1aecac4"],"request-id":["55c6990b-c4a6-352c-4a5b-449fc1aecac4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["61"],"SPIisLatency":["1"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["Bearer
realm=\"61e7a76b-024e-40d5-9185-2887a044d7cc\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]a044d7cc\"","Negotiate","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Tue, 05 Feb 2013 19:17:31 GMT"]} {"error_description":"The server was unable to process the request due to an
I've found few instances of this via various searches, most discuss not running the workflow as a system account, which is not the case here. The other mentions User Profile Service. I have no desire to have My Sites setup and whenever I start looking at
initiation User Profile Service it begins by creating a MySite web app and site collection to associate the UPS to. Is this all required to get Workflow going?
Thanks for any ideas/advice. I'm considering SP 2010 instead but would prefer to get 2013 working properly.

hi,
I am getting below error message...
RequestorId: e948b96b-77ab-d56e-e414-512061490b18. Details: System.ArgumentException: ContentTypeId at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
The WF is designed in SPD2013 and it has below steps..
1. Send email to sharepoint group member.
2. Start WF task with same group.
3. Add item to another list based on WF Outcome variable value.
4. End WF.
I have single server stand alone setup, everything on one server. Setting done for SMTP server on Central Admin out going mail and I am receiving the mail.
User ID used to to login to server is a member of Farm admin and also has Site Collection Admin rights. The WorkFlow service is running using different service account.
Any direction to get the exact error would be great help! Many thanks in advance.
Regards,
Kapildev

Conformation Cancellation error

Similar Messages

Maybe you are looking for