Connect Coldusion to Oracle when encryption connection is enabled

We have had ColdFusion 8.0.1 connected to Oracle (11g r2) with no problem until we encrypted the Oracle connections. All our software tools had no problem still connecting except Coldfusion. Supposedly encryption changes should only have been server based but is ColdFusion an exception? Do if we need to add a Connection String parameter into ColdFusion Data Source Definition? If Yes, what is it? Or is there another solution?
Thanks

893730 wrote:
We have had ColdFusion 8.0.1 connected to Oracle (11g r2) with no problem until we encrypted the Oracle connections. How are you encrypting the connections? Are you using the Oracle Advanced Security option to do network encryption? Or are you encrypting the connections at a lower level in the network.
All our software tools had no problem still connecting except Coldfusion. What is the error you get in ColdFusion?
Supposedly encryption changes should only have been server based but is ColdFusion an exception? Do if we need to add a Connection String parameter into ColdFusion Data Source Definition? If Yes, what is it? Or is there another solution?Does ColdFusion use OCI to connect to the database? Or does it use JDBC? Or something else?
Justin

Similar Messages

Safari Doesnot work when encryption key is enabled!

Hello!
I'm running a wireless homenetwork with my Ibook and two other Windows computers that run on ethernet LAN. All three get their connection from a 2-wire router.
The Problem:
Whenever i open safari with my ibook i get a msg that sates "safari cant connect/find server blahblahblh" (or something like that)
So, i called my ISP tech support. We found out that if i disable my encryption key Safari will work correctly.
But, i would rather prefer using an encryption key so that my neighbor doesnt steal my bandwidth.
Somebody help me! please
ISP:yahooDSL
ROUTER:2wire2700

Which wireless encryption are you using: WEP-Open, WEP-Shared, or WPA-PSK on the 2Wire gateway? WPA-PSK would be the most secure and preferable over either WEP.
If you must use WEP, especially in a mixed (PC/Mac) environment, always use Hex characters:
- 10 Hex characters (for 40-bit WEP)
- 26 Hex characters (for 128-bit WEP)
(ref: http://docs.info.apple.com/article.html?artnum=106424)

Linksys WAG54GS Router - iBook G4 Cannot Connect When Encryption Enabled

Hi - I have a HP laptop and Apple iBook G4 with a wireless connection transmitted through a Linksys Wireless router. When encryption is disabled, the iBook can pick up a signal and I can browse the internet, when WEP encryption is enabled, it cannot. The HP works fine. I add the WEP key to the iBook but it cannot connect. I've tried the two 128bit encryption options and the standard option, but none of them allow a connection. Is there a specific way to secure your internet connection/router when using an Apple? Any ideas/comments appreciated.
iBook Mac OS X (10.4.4)
iBook Mac OS X (10.4.4)
iBook Mac OS X (10.4.4)

Flames1977, Welcome to the discussion area!
Hopefully the information in KB 106250, Mac OS X, AirPort: Connecting to Third-Party Base Stations will help.
Also if the Linksys has several locations for keys, make sure that your WEP key is in location #1. Apple does not support any other location.

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fi network. I have reset the network settings and still Safari will not open any web pages. Help!

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fe network. I have reset the network settings and still Safari will not open any web pages. Help!

Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding". I am not able to connect with anything on the Internet. Frustrating since I am able to connect with my laptop. Thanks for the suggestion.

How to use java source in Oracle when select by sqlplus.

How to use java source in Oracle when select by sqlplus.
I can create java source in Oracle
import java.util.*;
import java.sql.*;
import java.util.Date;
public class TimeDate
     public static void main(String[] args)
public String setDate(int i){
GregorianCalendar calendar = new GregorianCalendar();
calendar.setTime(new Date((long)i*1000));
System.out.println("Dateline: "
+ calendar.get(Calendar.HOUR_OF_DAY) + ":"
+ calendar.get(Calendar.MINUTE) + ":"
+ calendar.get(Calendar.SECOND) + "-"
+ calendar.get(Calendar.YEAR) + "/"
+ (calendar.get(Calendar.MONTH) + 1) + "/"
+ calendar.get(Calendar.DATE));
String n = calendar.get(Calendar.YEAR) + "/" + (calendar.get(Calendar.MONTH) + 1) + "/" + calendar.get(Calendar.DATE);
     System.out.print(n);
     return n;
I have table name TEST
ID DATE_IN
1 942685200
2 952448400
When I write jsp I use method setDate in class TimeDate
The result is
ID DATE_IN
1 1999/11/16
2 2003/7/25
Thanks you very much.

It is unclear where you are having a problem. Is your issue at runtime (when the form runs in the browser) or when working in the Builder on the form?
Also be aware that you will need to sign your jar and include some new manifest entries. Refer to the Java 7u51 documentation and blogs that discuss the changes.
https://blogs.oracle.com/java-platform-group/entry/new_security_requirements_for_rias
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/manifest.html

RE: POTS-to-any and any-to-POTS connections are enabled

Hi,
First post here. Thanks for the assistance.
On
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-h323h323.html , it indicates this comment
"Note H.323-to-H.323: By default, H.323-to-H.323 connections are disabled and POTS-to-any and any-to-POTS connections are enabled"
My query is what is POTS? On the page itself, there is no definition. I try keying in POTS into the search bar but still no answers.
Anyone knows?

Hi Roman,
Thanks for the quick reply
The reason I'm asking is my vendor is recommending that we include these into our router
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
But do I have to since it indicates
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
By default, POTS-to-any and any-to-POTS connections are enabled.

Oracle.xml.sql.OracleXMLSQLException:Cannot enable auto commit within JTS transaction

Hi All,
OracleXMLSave class in the Oracle XDK is being used to load XML data into an 8170 database. The Java code is running in IBM WebSphere with container-managed transactions. When JTA is enabled with the Merant JDBC driver for Oracle, we get the following error when the XML is loaded:
oracle.xml.sql.OracleXMLSQLException: Cannot enable auto commit within JTS
transaction
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:2213)
     at oracle.xml.sql.dml.OracleXMLSave.insertXML(Compiled Code)
This suggests the OracleXMLSave class is not aware of the fact that it is now operating in a JTS transaction where control is managed elsewhere. i.e. should also not attempt to commit or rollback, as this is the responsibility of the container.
Is there a property which needs to set to prevent the above or does the XDK not work with J2EE (JTS) transactions?.
If you have any useful comments, let me know. Testing the above presents me with a number of problems so if this is easily explained , let me know.
Thanks,
Malcolm

Clearly , there does seem to be something a bit odd with the above stack.
<Bug:1917808> mentions OracleXMLSave in context of plsql equivalent : dbms_xmlsave . i.e dbms_xmlsave is a wrapper around OracleXMLSave class.
disabling autocommit on connection as follows should help:
conn = DriverManager.getConnection("connect string","scott","tiger");
conn.setAutoCommit(false);
to disble auto commit and see if this has an effect.
This issue might be <Bug:1497506>. If disabling autocommit does not work then it appears that it could be this issue .
Malcolm
Hi All,
OracleXMLSave class in the Oracle XDK is being used to load XML data into an 8170 database. The Java code is running in IBM WebSphere with container-managed transactions. When JTA is enabled with the Merant JDBC driver for Oracle, we get the following error when the XML is loaded:
oracle.xml.sql.OracleXMLSQLException: Cannot enable auto commit within JTS
transaction
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:2213)
     at oracle.xml.sql.dml.OracleXMLSave.insertXML(Compiled Code)
This suggests the OracleXMLSave class is not aware of the fact that it is now operating in a JTS transaction where control is managed elsewhere. i.e. should also not attempt to commit or rollback, as this is the responsibility of the container.
Is there a property which needs to set to prevent the above or does the XDK not work with J2EE (JTS) transactions?.
If you have any useful comments, let me know. Testing the above presents me with a number of problems so if this is easily explained , let me know.
Thanks,
Malcolm

When ip cef is enable timeouts occur

First i want to enable netflow on our routers, and in order to do that i need to enable IP CEF. but when i enable cef all of the point to point vpn sites connected to the router, they stay connected but the terminals that connect to our citrix farm will not connect they from what i can tell timeout on the connection. disabling cef they can connect. enabling cef they can't connect,
This is really odd behavoir since we can still remote access the site but the terminals just can't connect when ip cef is enabled.
I attached the config of the router, i removed the tunnels and other various things that is not relivant(i believe)

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I'm not 100% certain, but I believe FastSwitching and CEF switching apply to unicast, not multicast. Your "IP mroute-cache" command enables/disables fast multicast switching.
On a 3750, switching should be hardware based, for unicast and multicast, unless TCAM resources are insufficient. If hardware switching falls back to non-hardware switching, you'll likely find process vs. Fast vs. CEF vs. multicast doesn't matter, all too slow.

Outlook 2013 archiving doesn't work when cached mode is enabled

Hi All,
I have a problem in Outlook 2013 which I've been able to replicate on two separate PCs, operating against two separate Exchange servers. In both cases, archiving of old items does not work in Outlook 2013 when cached mode is enabled. It works
fine if cached mode is switched off so I don't believe the problem is related to the archiving settings.
Has anyone else come across this?
Thanks,
Matt
Systems Engineer
BOM Group LTD

Based on my knowledge, Outlook auto archieve setting is stored in registry and only affects on local host.
If the AutoArchive doesn't work anymore, please refer to the follow article to troubleshoot the issue
http://www.howto-outlook.com/faq/archivenotworking.htm
If we are talking about Microsoft Exchange Online Archiving, I think it would run fine when you in Exchange online mode as your expected.
Tony Chen
TechNet Community Support

Get client browser version in C# (When IE Compatibility mode enabled)

We need to know client's browser version from C# code (Server side). We use Request.Browser or HTTP_USER_AGENT to get the details.
However, In IE when compatibility mode is enabled it always returns IE 7 version irrespective of version of IE. ie, even in IE 11 when compatibility mode enabled it returns IE 7 but I want actual version which is IE 11. Is there any way I can get actual IE
version?

this is a c# forums section, you can post in the asp.net forums:>
forums.asp.net
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

When Coherence security is enabled there is a significant performance hit

When Coherence security is enabled, every call to do the cache operation do a security check. This is negatively impacting application's performance. I'm using the built in DefaultController & java keystore login. Is there any workaround so that the performance can be improved.

Hi user9980369
It depends how you have implemented security. What version of Coherence are you using?
JK

Only available when document rights are enabled

Hi,
Adobe 9.4.6, Ubuntu Natty
When I open a pdf file with PDFXchange reader running in Wine, I can highlight text in the file.
When I open the same file with Adobe I cant even dipslay the highlight toolbar, it says "Only available when document rights are enabled"
How can I fix this?

If by Adobe you mean Adobe Reader, then that would be normal for Reader 9, if you're talking about the Hightlight Text annotation tool. Reader 10 allows you to add text highlights and sticky note annotations without the document having the corresponding usage rights, assuming it doesn't have any security restrictions that would prevent it. Other PDF viewers are free to behave however they want.

Bug: Previews not generated properly when Soft Proofing is enabled in LR5, LR5.2 RC

I am experiencing problems with previews in Lightroom 5.0 and Lightroom 5.2 RC.
I have noticed incorrect previews under the following circumstances when Soft Proofing is enabled:
1. When I make modifications (like cropping), the preview in the Navigator panel does not update until I uncheck (and recheck) the Soft Proofing option.
2. When I am paging through several images at 100% or greater, the view in the main window, while zoomed in correctly, does not provide the correct resolution (blurry) until I either uncheck (and recheck) the Soft Proofing option or zoom out and zoom back in.
I am using:
Lightroom 5.0 64-bit, Lightroom 5.2 RC 64-bit
Windows 7 Ultimate 64-bit
Canon CR2 RAW files
16GB RAM, plenty of local disk space
Note: I have not done extensive testing on this, but many of these files are stored on a network drive, so I don't know if there is some sort of bug in the optimized routines for network drives/folders.

I have the same problem as michaeln2 and adobe 1230931.
I use Lightroom 4.4.
When I am in the Develop screen and I turn on Soft Proofing, then about 20% of the time the image goes blank. If I go back to Library view and reenter Devleop, sometimes the image will show up, sometimes not. If I advance to other images, sometimes they'll show and sometimes not in the Soft Proofing mode. Sometimes rotating an image in Library mode and going back into Develop "wakes up" the Soft Proofing and sometimes not.
In other words, the soft proofing feature is, as michaeln2 says, functionally useless. I'm surprised that no fix has been posted on this thread. No point upgrading to Ver 5 either...as it seems to be buggy there as well. Help!

I have been using firefox aurora 7 for mac. Most of my handful of add-ons have been disabled -- including Read It Later and Feedly, which I was making good use of. Can you tell me when they will be enabled for firefox aurora 7?

I have been using firefox aurora 7 for mac. Most of my handful of add-ons have been disabled -- including Read It Later and Feedly, which I was making good use of. Can you tell me when they will be enabled for firefox aurora 7? Maybe I should go back to firefox 6

You can use the Tab key to select a search engine on the bottom bar and press Enter to use the search engine to do the search.
*https://support.mozilla.org/kb/Search+bar
In the current Firefox 34 release there is a new "one-off" search bar.
This search bar doesn't show the name of the search engine and a logo.
You can type one letter to make a drop-down list appear where you can see suggestions and see the used search engine and that also has bar at the bottom where you can select other search engines that are enabled via the Search tab in Options/Preferences.
You can use the Tab key to select one of the other available search engines and press the Enter key to search with the selected search engine.
Click the search engine icon and click "Change Search Settings" to open the Search tab in Options/Preferences (positioned between Tabs and Content) to select the default search engine and select which search engines to show in the search bar drop-down list that opens when you start typing search terms.

Firefox Tearing when Scrolling - How to enable Vsync.

Peace ppl!
I'm experiencing firefox tearing issues/visual artifacts when smooth scrolling is enabled on aur/firefox-pgo 3.6.6-1.
One way to solve this is to enable vsync. Simply enable desktop effects on kde4 and enable vsync.
$ glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
263 frames in 5.0 seconds = 52.432 FPS
The fps is close to the monitor refresh rate of 60Hz.
The weird thing is if I disable desktop effects thereafter, the vsync setting still stands!
Is there a way to enable vsync without going through all this?
Perhaps through an xorg.conf setting. (Don't have one now; not required)
Thanks in advance!

http://www.zupmage.eu/i/bV8yTk2LIZ.png
Disabled smooth scrolling and resolve my problem
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Connect Coldusion to Oracle when encryption connection is enabled

Similar Messages

Maybe you are looking for