Get client browser version in C# (When IE Compatibility mode enabled)

We need to know client's browser version from C# code (Server side). We use Request.Browser or HTTP_USER_AGENT to get the details.
However, In IE when compatibility mode is enabled it always returns IE 7 version irrespective of version of IE. ie, even in IE 11 when compatibility mode enabled it returns IE 7 but I want actual version which is IE 11. Is there any way I can get actual IE
version?

this is a c# forums section, you can post in the asp.net forums:>
forums.asp.net
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Similar Messages

Hey guyz.. i wanna ask if i get an updated version from itunes when i plug my iPhone into the Pc, i get a letter tells me that there is an update for your iPhone ... i wanna ask is it safe to download ?? and does it make any side effects on longTerm using

hey guyz.. i wanna ask if i get an updated version from itunes when i plug my iPhone into the Pc, i get a letter tells me that there is an update for your iPhone ... i wanna ask is it safe to download ?? and does it make any side effects on longTerm using ??

It is safe to download if your phone is not jailbroken. Before you download it, however, take some precautions:
Reboot your computer
Disable your antivirus and firewall
Connect the phone cable to a USB port directly on the computer, not a hub
Before updating right click on the name of the phone in iTunes and choose "Backup"
When you are given the choice choose "Download only", not "Download and Update"
After the download completes successfully click the Update button to install it.
Most of these steps are just being overly cautious, as most people ignore them and have no problems. But occasionally the extra steps save grief.

Why do I get a norwegian version of MUSE when all the other Adobe programs are in english version? I have setup the installer to English.

Why do I get a norwegian version of MUSE when all the other Adobe programs are in english version? I have setup the installer to English.

Muse uses AIR and if that is installed in Norwegian, so Muse will show stuff in that language. You may simply need to reinstall Adobe AIR in English.
Mylenium

Getting client name using userenv('terminal') when use of TERMINAL SERVER

Hi all,
Is there any way we can get client computer name when we use terminal server. userenv('terminal') giving server name only. How can I get client computer name.
Thanks in advance

the report-forum is here :
Reports

Why did I get a trial version of PSCS6 when I wanted to upgrade PSCS5.5

I've been a Creative Cloud member for more than a year, so why, when I tried to upgrade Photoshop CS5.5 to PSCS6 did I get a trial version that Adobe now wants me to subscribe to for $29.99 in addition to the $49.99 I'm already paying?
CarolBMT

When you get the trial window, Click on Licence this Software. then enter the adobe id against which you have bought CC subscription.
Now Sign In, this should get you working.
Regards,
Ashutosh

How to get Client(browser) current date/time in BIP report

Hi,
I need to display report generated date in BIP report and this should be client(browser) current date/time. I tried the following things.
1. have used MS Word Native Date/time using Insert->Date/Time. And we have chosen the M/d/yyyy h:mm:ss am/pm format. but it is printing BIp server date/time, not client date/time.
2. <?xdofx:sysdate?>, <?xdoxslt:sysdate_as_xsdformat()?> and <?format-date:xdoxslt:sysdate_as_xsdformat();'SHORT_TIME'?> are giving GMT Date/Time, but we need client Date/Time.
3.<?xdoxslt:sysdate('DD-MON-YYYY HH12:mi:ss')?> is giving the system date/time of the machine where BIP server is installed.
Could you provide some help in this??
Thanks
Hari

Hello, Hari,
what would return something like this:
Execution date:
<?xdoxslt:current_date('ja-JP', 'Asia/Tokyo')?>
<?xdoxslt:current_time('ja-JP', 'Asia/Tokyo')?>
@Vetsrini,
for my opinion,
in the countries where time is switching (winter/summer) using the hard coded time zones in the format-date() cause a problem:
for example:
if we enter the date in date prompt in summer it will return PM_DT = 2010-07-20T00:00:00.000+04:00
in winter 2010-07-20T00:00:00.000+03:00, so,
using <?format-date:PM_DT;'DD.MM.YYYY';'GMT+3'?> return 2010-07-20 in winter and 2010-07-19 in summer.
regards,
Eldar A.

Get rid of parallels menu icons when in coherence mode?

Hi everyone,
When in coherence mode, Parallels inserts 6 icons into the menu bar which can be a little annoying for people who value a simplistic menu bar. I love Parallels and this is not a 'make or break' factor for using the wonderful invention. However, I'm wondering if anyone has found a solution that allows users to remove these icons. If so, if you could share it, I would be very grateful!
Thanks in advance for any help

Instead of using coherence mode just launch Parallels and Windows (or whatever OS you are using). Then to move between this and Mac side use your control and right or left arrow on your keyboard to move between screens.

MIME type issue in version 4.1/4.2 Compatibility Mode

Problem: when displaying a PDF file, it displays OK as PDF if APEX 'Compatability Mode' = 'Pre 4.1', but displays as HTML when in either '4.1' or '4.2' mode.
Apex: 4.2.2.00.11
DB: 11gr2
Web server: Apache on Linux
More detailed description... this seems to be a MIME type issue related to APEX (or maybe DB) versioning. The following code works as expected when run in 'Pre 4.1' mode - ie. it displays an appropriate PDF document in the appropriate Acrobat/other plugin in several browsers (Firefox/Opera/Chrome/IE). But just by changing 'Compatability Mode' to '4.2' (or even '4.1'), it then downloads the file but displays it as a bunch of random characters, and the web page header MIME type is 'text/HTML'.
Note: this also happens with other file types such as xls/doc/etc, but I expect fixing PDF should also fix these.
I'm at a bit of a loss as to where this is happening, it seems there is a difference in the 'Compatibility Modes' between either the creating of the HTML header using 'OWA_UTIL.mime_header' or the component path it traverses before reaching apache.
The only other thing I could think of is that we do a bit of redirection to display the PDF, though this seems like it might be a red herring. Basically we use page 560 as a container, and then display the PDF with page 561 within a frame embeded within page 560. So, on the page 560, which is the one we reference throughout the application, we have a region with a source of '<iframe src=?p=&APP_ID.:561:&SESSION.height="500" width="700"&gt</iframe&gt</pre>'. Then on page 561, in a 'On Load - Before Header' process, we make the call to the code 'DOWNLOAD_APPLICANT_PDF' (below).
Note: I did try calling 'apex_application.stop_apex_engine' after 'DOWNLOAD_APPLICANT_PDF', as suggested in a couple threads, but it didn't fix the problem, and caused a couple low-level system errors.
Code:
<pre>
CREATE OR REPLACE PROCEDURE DOWNLOAD_APPLICANT_PDF ( p_doc_id IN   NUMBER
   AS
      v_length      NUMBER;
      lob_loc       BLOB;
      l_display_inline   CHAR := '1';
   BEGIN
      SELECT pdf_data, DBMS_LOB.getlength (pdf_data)
        INTO lob_loc, v_length
        FROM pdf_dest
       WHERE pdf_dest_id = p_doc_id;
      OWA_UTIL.mime_header ('application/pdf', FALSE);
      HTP.p ('Content-length: ' || v_length);
      HTP.p ('Content-Disposition:inline;filename="mydoc.pdf"');
      OWA_UTIL.http_header_close;
      WPG_DOCLOAD.download_file (lob_loc);
END;
</pre>

Hi,
for some background information about the above changed behavior, have a look at 4.2 Before Header Processes and Browser Security HTTP Headers of the APEX 4.1. release notes.
Regards
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Addin is not loaded when in compatibility mode

Hi there!
I have a plugin that is loaded on my machine when I start Word 2010 as I want it to do. But if I load documents from Word 97 or 2003 and the application starts in compatibility mode my plugin is not loaded.
Is threre anywhere a switch in my project properties or in word to make the plugin work in compatibility mode too?
Regards Sebastian

Hello Sebastian,
There is no special settings for that. Did you have a chance to check out the COM Add-ins list in Word?
Is your add-in listed in the Disabled Items list?
Microsoft Office applications can disable add-ins that behave unexpectedly. If an application does not load your add-in, the application might have hard disabled or soft disabled your add-in.
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the
Startup event handler in your add-in is executing.
Soft disabling can occur when an add-in produces an error that does not cause the application to unexpectedly close. For example, an application might soft disable an add-in if it throws an unhandled exception while the
Startup event handler is executing.
When you re-enable a soft-disabled add-in, the application immediately attempts to load the add-in. If the problem that initially caused the application to soft disable the add-in has not been fixed, the application will soft disable the add-in again.
You can read more about that in the
How to: Re-enable an Add-in That Has Been Disabled article in MSDN.

TS1489 the instructions are misleading, there is no compatability tab under itune properties. still getting the message that itune.exe run in compatability mode-so??

dear all,
appreciate any help with the new iyune install.
get a message that itune.exe set to run in compatabilty mode for an older version of windows. i use windows7.
tried to follow the apple support instructions but found them misleading as couldn find compatability tab under (right click) prperties...
any other idea??
many thanks

Amazing that someone noticed this post and took a stab at it after over a year... Actually, I found my answer long ago, and have tried to go back and post?it'son several boards where I had been looking for the answer. It seems to be such a common problem that I figure someone else can surely use this solution as I did. I would suggest that anyone?who is experiencing the frustration of not?getting their computer to recognize their device?read the very enlightening and helpful page that I am linking to here:
http://www.misticri'ver.net/forums/showthread.php?t=30939? (this is from a forum for iRi'ver, but the info and fix are uni'versal)
This simple solution involves correcting the ENUM keys in the Registry (not as scary as you might think) and deleting all instances of your player from the Device Manager and then reinstalling so that Windows and other applications will all recognize your player again. It's so simple, and once I tried it, I was amazed that's all it took to fix the problem.
?I?suggest you read the whole page and follow the instructions as they are given. I deleted and re-installed my player several times and then rebooted a couple of times before it took effect, but then it did, and I was able to download the Firmware and have had continued success with my original player that I posted about as well as others I have acquired since I first posted that message in 2006. For reasons I have not yet identified, this problem still happens every now and again, sometimes when I switch between players to synchronize. It may well be that when I use my registry cleaner or some other utility that "fixes" my registry, that it resets this particular key - but as long as it's easy to fix, it's not a problem. Hope this helps others who may stumble upon this odd little problem with the Zen Xtra.Message Edited by TrixieInDixie on -05-200709:28 PM

How to get client machine name and IP address

Hi,
In my office I have one SERVER which has FORMS & Report Server installed and all the clients are accessing that application thru the following URL :
http://OraServer:8889/forms/frmservlet
to get the machine name I have read into a global variable like this
SELECT USERENV('TERMINAL' ) into :global.clientname FROM DUAL;
but obviously all the time its returning the SERVER machine name...not the name where client is accessing the program....so how can I get the client machine name..
thanks

Hi Frank,
Well I am using Developer Suite 10g Release (10.1.2.0.2) ..I've gone thru the link what you have sent me and noticed that whatever updations of conf file or classpath its already there so i guess needn't to modify cause I think my release 10.1.2.0.2 has did already as webutils been bundled with it.
Well What i did is to double click on ATTACH LIBRARY and browse the location to find webutil.pll and finally attached it...even though its showing me all the procedures like clientinfo and others...
on my block's canvas I've put a button and used this trigger to get client info function like this.
when-button-pressed trigger of INFOBUTTON
DECLARE
o_clientinfo varchar2(50) := Webutil_clientinfo.GET_HOST_NAME ;
begin
message(o_clientinfo);
end;
but when I am trying to open this form its simply not showing up..strange thing is that there is no error as well...so plz kindly guide me how to get clientinfo hostname or ipaddress using that library function.
thanks

Client Browser Checking

I am looking for some Plumtree Classes or Interfaces that I can use to enable client browser checking - check to see if the client is using what version of IE or Netscape or Mozilla. We are trying to trap these process and make this a Plumtree UI solution-side instead of handling this through IIS. We are attempting to place these browser checking proccesses inside OnBeforeLogin PEI. Handling a browser check to detect the client browser to see if they are using an out-dated browser version, if client is using out-dated browser version, throw them a message box stating that client will lose some functionality if using dated browsers. Has someone here already done and went through this task?
I have seen the classes before but do not remember what Plumtree-centric object package they belong with and now I cannot find it. If anyone know what the classes or objects are could you guys point me to the right direction??
Thanks for the assist
Ray Salgado, State of Maryland, 410.260.6083

Thanks Don!
Got that, that is great for the first step of the browser sniffing process. To get the browser type.
Second step is to get the browser version - We also need to detect the client browser version so as create a condition as something like "If IE version 4 below" or "Netscape 5 or below" then we can create a redirect to a community page that has some User Advisory messages warning them that if they continue with the request with the browser they are using then navigation and presentation performance and experience may vary. User can choose to continue or backup.
Thanks
Ray

When I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this

when I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this?

Carolyn Samit has answered this question before. I did it with this info. Thank you Carolyn for your awesome help.

After installing Firefox 5.0 and attempting to open the browser I get: Error: Platform Version '2.0.1' is not compatible with MinVersion = 5.0 MaxVersion = 5.0 At the top of the message is Yul Runner

While installing Firefox 5.0 and attempting to open the browser I get: Error: Platform Version '2.0.1' is not compatible with MinVersion > = 5.0 MaxVersion < = 5.0
Above the message in the border was XULRunner

That can happen if the updater wasn't able to update (replace) all the files in the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Does anyone else get a Netfix window popping up unexpectedly? I have an iMac with OSX 10.6.8 and Safari browser version 5.1.10.

Does anyone else get a Netfix window popping up unexpectedly? I have an iMac with OSX 10.6.8 and Safari browser version 5.1.10. It only happens when I go to a specific local news site, and it is only a Netflix window that opens up. I do have a Netflix account.

Do you have Block Popup Windows checked in Safari/Preferences/Security?
What web site?

Get client browser version in C# (When IE Compatibility mode enabled)

Similar Messages

Maybe you are looking for