Connect invoice to user through WF log

Ladies and gentlemen,
I have a performance problem with WF/invoicing report.
I need to show those invoices which were approved by a selected user. There are thousands and thousands of invoices (10 years of invoicing). I see no way how to connect an invoice with a user, because the user does not create or change the invoice so I cannot use any standard table field. The only way I can connect the invoice and an approver is the WF log.
In my report invoices reading takes like 20% of the processing time and 80% the WF log reading. Because I cannot connect an invoice with a user in a smart way, I have to select many more invoices than I really need to, read the WF log for them and filter like 90% of them, because after checking the WF log I can tell the user had nothing to do with the specific invoice.
Is there a way how to quickly check if the user was a part of the approval process (in fact I have a name of a specific task) for a specified invoice? If this could help me reduce the number of the processed invoices and would be much quicker than reading the whole log for every invoice and its approval process, it would help me improve the performance.
Thank you for your time and effort and hopefully some ideas,
regards Otto

Hi Otto,
Of course there is transaction SWI5 - which shows you which workflows the user has taken part in. But I suspect that this will not help you much as it is on a user-by-user basis.
Swi1 - with the selection criteria filled in (dialog task, task ID) should help.
If that fails, maybe some custom report to use SAP_WAPI_GET_WI_AGENTS?
Let me know if any of these bring you joy,
Sue

Similar Messages

Another user of your computer is currently using this connection. This user must disconnect before you can log on.

Hello
I have a single computer that is going to be shared between 5 people. In an effort to save time. I wanted the users to have a single shared LOCAL login to the computer.
Then each user could pull up an RDS session through RDWEB on our 2012 r2 RDS farm.
However, when I attempt to log in more than one user through RDWEB I receive:
Another user of your computer is currently using this connection. This user must disconnect before you can log on.
I have done some research on this, and followed this advice, and did the following steps on all my RDS session host and broker servers
Enable Multiple RDP Sessions
- Log into the server using Remote Desktop.
- Open the start screen (press the Windows key) and type gpedit.msc and open it
- Go to Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections.
- Set Restrict Remote Desktop Services user to a single Remote Desktop Services session to Disabled.
- Double click Limit number of connections and set the RD Maximum Connections allowed to 999999.
However, it did not solve the problem. Anyone have suggestions?

Hi Michael,
In addition you can try below registry setting for multiple remote session.
HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Terminal Server
fSingleSessionPerUser REG_DWORD 0x00000000
Note: By default the registry value is set to 1, but you need to change to 0.
Also if you are making connection through gateway then recheck whether the setting is enabled on gateway side for multiple session.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Oracle Instance shows connected,Yet am ORA-01012: not logged on

Hi experts,
Please help in log in to my database, which unfortunately was happening an hour before, but now it is not working
In between I only did a change in some permission stuff for my base directory, but later brought it back to original permissions.
Still it is haunting me..
I have set up my SID/HOME/PATH perfectly, tried to check processes at OS level, they are less, still nothing is happening though database is up and running.
I can see it at OS level and through ALert log..
==================
oracle@dap-csw-ora01 /home/oracle > ps -ef|grep pmon
oracle 3145946 1 0 18 feb - 0:44 asm_pmon_+ASM1
oracle 7995430 1 0 18 feb - 0:50 ora_pmon_adobe_2
oracle 13828212 11141232 0 14:59:09 pts/0 0:00 grep pmon
oracle 7471386 1 0 18 feb - 0:57 ora_pmon_fxss_1
oracle@dap-csw-ora01 /home/oracle > sqlplus
SQL*Plus: Release 11.2.0.3.0 Production on Thu Feb 21 14:59:12 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter user-name: /as sysdba
Connected.
SQL> show user
USER is "SYS"
SQL> select instance_name,status from v$Instance;
select instance_name,status from v$Instance
ERROR at line 1:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0

CKPT wrote:
Now I understood,..it is not a problem with permission something else is making this mess..though unknown..
I bounced one of the database after taking permission from apps team, Now it works perfect...no issue whatsoever..
But I want to know the reason..I dont want to face it any more...Whenever oracle installs[OUI], It knows well what the permissions to be assigned and what needed.
You should not disturb them, What are the users, groups, executable, read, write permissions earlier and after changes and now?
And i interestingly wanted to know why you wanted to test such things on production. Its like playing with fire so be cautious or else it costs a lot :)Basha,
I don't think that there was any other way for the OP to solve the error. Either he could wait (which doesn't help normally in this error) or had to bounce the db, which he did. Also, with permission he meant, telling to the App team and than going for a bounce. I can't a mentioning of changing permissions anywhere .
Aman....

Cannot connect to RDP farm through Direct Access

Hey everyone, hope you can help/
I have an issue connecting to the RD Farm when connected through Direct Access. I have tried specifying the RD Gateway to no avail. Cannot ping RD farm or session hosts through v4 but can v6. The address comes back as the 6to4 address and is different for
each ping to each session host.
When trying to RDP to the farm (or directly to a SH) certificate trust comes up so confirm that i am happy to trust the certificate for the connection, and it goes through to the point of initiating remote connection and then fails with the standard "Remote
Desktop cant connect to the remote computer..." message.
I am not entirely sure where or how to troubleshoot this first. Users local side of the wan are ok, its only external.
Apparently after numerous attempts the connection works but I am yet to witness this.

Russel,
the problem has been solved now! The final thing missing was just a check in a checkbox.
Below a comprehensive explanation that may help others.
We basically did what you proposed:
We sent a ping from one of the DA-Clients to the TS-Farm members. Since we got replies, we knew that IPv6 communication generally is okay. The answer received was an IPv6. In this scenario we had not yet given any IPv6 to the farm-members! Thus we knew it must
be comming from the DA DNS-Proxy. There are a number of DA-GPOs and one of them is dictating the net portion of the IPv6 to be used in DA-communication, appended by a hex-translation of the target computers IPv4. Therefore the DA DNS-Proxy is taking the GPO-set
IPv6-value, adds the IPv4 in hex and sends it back as an ICMP echo.
With this in place and working correctly one can ping any domain host from any DA-Client. This is configured when initially setting up DA and is handled by the wizzard. Once DA is installed this should all be in place without extra user interaction.
We then took those IPv6 answeres and turned them into fixed IPv6es of the farm-members (each member its own IPv6). So far so good, but this is where it still did not work. Evaluation of the Connection Broker log showed that the redirect reply still included
only the IPv4 of the target farm-member. With that (after a short while) we realized that one has to set a
check in the Connection Brokers Settings, so that the IPv6 LAN-Connection will be used for redirects as well and not only the IPv4 LAN-connection..... How stupid is that? :-)
But as we all know - in dealing with server configuration - you should always "know before you go". But even though you may think you do, when finally arriving you know you didn't.... And that's what we call experinece.
Thanks to Russel for your interest and help.
Brgds Ralf

ALV output converted into PDF format and send that PDF to user through mail

Hi Experts,
I have report earlier its output was in alv grid.
Now i want that ALV output converted into PDF format.And that PDF output send to user through mail.
Can u please tell how to do?
My code is here(output is displaying in ALV grid).
INCLUDE <icon>.
TYPE-POOLS: slis, kkblo.
TABLES : zmsd_freight_hdr, zmsd_freight_det, zmsd_blinfo, zmsd_diheader.
TABLES : lfa1.
DATA : t_hdr   LIKE   zmsd_freight_hdr   OCCURS 0 WITH HEADER LINE,
       T_DET   LIKE   ZMSD_FREIGHT_DET   OCCURS 0 WITH HEADER LINE,
       t_bl    LIKE   zmsd_blinfo        OCCURS 0 WITH HEADER LINE,
       t_di    LIKE   zmsd_diheader      OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_det OCCURS 0.
        INCLUDE STRUCTURE zmsd_freight_det.
DATA    type(30).
DATA: END OF t_det.
DATA: v_target2(30),
      v_zsammg LIKE t_det-zsammg,
      v_gsttotal LIKE t_det-zamount.
DATA : BEGIN OF t_data OCCURS 0,
         zsammg       LIKE zmsd_freight_hdr-zsammg,
         zdidbl       LIKE zmsd_freight_hdr-zdidbl,
         zvkorg       LIKE zmsd_freight_hdr-zvkorg,
         zinvno       LIKE zmsd_freight_hdr-zinvno,
         zttlamt      LIKE zmsd_freight_hdr-zttlamt,
         zstatus      LIKE zmsd_freight_hdr-zstatus,
         ztype        LIKE zmsd_freight_hdr-ztype,
         zconfirm     LIKE zmsd_freight_hdr-zconfirm,
         zconfirmdate LIKE zmsd_freight_hdr-zconfirmdate,
         erdat        LIKE zmsd_freight_hdr-erdat,
         ernam        LIKE zmsd_freight_hdr-ernam,
         erzet        LIKE zmsd_freight_hdr-erzet,
         aedat(10),
         aenam        LIKE zmsd_freight_hdr-aenam,
         aezet        LIKE zmsd_freight_hdr-aezet,
         zline        LIKE zmsd_freight_det-zline,
         zfptype      LIKE zmsd_freight_det-zfptype,
         zchrcode     LIKE zmsd_freight_det-zchrcode,
         zcurcode     LIKE zmsd_freight_det-zcurcode,
         zqty         LIKE zmsd_freight_det-zqty,
         zuom         LIKE zmsd_freight_det-zuom,
         zrate        LIKE zmsd_freight_det-zrate,
         zamount      LIKE zmsd_freight_det-zamount,
         zexrate      LIKE zmsd_freight_det-zexrate,
       zccode       LIKE zmsd_blinfo-zccode,      "MADK991565
         zccode       like ZMSD_FREIGHT_HDR-zfcode, "MADK991565
         zbldate(10),
         zbl          LIKE zmsd_blinfo-zbl,
         type(3),
         waerk        LIKE zmsd_freight_det-zcurcode,
         zamountl     LIKE zmsd_freight_det-zamount,
       END OF t_data.
DATA : w_layout      TYPE   slis_layout_alv,
       w_catalog     TYPE   slis_fieldcat_alv,
       t_catalog     TYPE   slis_t_fieldcat_alv,
       w_sort        TYPE   slis_sortinfo_alv,
       t_sort        TYPE   slis_t_sortinfo_alv.
DATA   V_ZINVNO    like   T_HDR-ZINVNO.                   "MADK991565
DATA : v_count TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK a0 WITH FRAME TITLE text-001.
PARAMETERS     : p_zvkorg LIKE zmsd_freight_hdr-zvkorg OBLIGATORY .
SELECT-OPTIONS : s_zdidbl FOR zmsd_freight_hdr-zdidbl             ,
                  s_zccode FOR lfa1-lifnr                          ,
                  s_status FOR zmsd_freight_hdr-zstatus            ,
                  s_ztype FOR zmsd_freight_hdr-ztype              ,
                  s_erdat FOR zmsd_freight_hdr-erdat              ,
                  s_ernam FOR zmsd_freight_hdr-ernam              ,
                  s_zconfd FOR zmsd_freight_hdr-zconfirmdate       .
PARAMETERS     : p_zconf AS   CHECKBOX                            .
SELECTION-SCREEN END OF BLOCK a0.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-002.
PARAMETERS     : p_hdr    RADIOBUTTON GROUP rad DEFAULT 'X'        ,
                  p_det    RADIOBUTTON GROUP rad                    .
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
AT SELECTION-SCREEN.
START-OF-SELECTION.
PERFORM get_data.
PERFORM process.
PERFORM display.
END-OF-SELECTION.
PERFORM fm_get_num_pages.
AT USER-COMMAND.
AT LINE-SELECTION.
TOP-OF-PAGE.
PERFORM fm_top_of_page USING '7010' sy-title space.
FORM get_data.
SELECT   *
    FROM   zmsd_freight_hdr
    INTO   TABLE t_hdr
   WHERE   zvkorg        EQ p_zvkorg
     AND   zdidbl        IN s_zdidbl
     AND   zstatus       IN s_status
     AND   ztype         IN s_ztype
     AND   erdat         IN s_erdat
     AND   ernam         IN s_ernam
     AND   zconfirmdate IN s_zconfd
     AND   ZFCODE        IN S_ZCCODE.                      "MADK991565
IF p_zconf = 'X'.
    DELETE t_hdr WHERE zconfirm NE 'C'.
ENDIF.
CHECK NOT t_hdr[] IS INITIAL.
SELECT   *
    FROM   zmsd_blinfo
    INTO   TABLE t_bl
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg.
SORT t_bl BY zsammg.
SELECT   *
    FROM   zmsd_diheader
    INTO   TABLE t_di
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg.
SORT t_di BY zsammg.
IF P_DET = 'X'. "MADK933361
SELECT   *
    FROM   zmsd_freight_det
    INTO   TABLE t_det
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg
   AND ZINVNO = T_HDR-ZINVNO .                           "MADK991565
SORT t_det BY zsammg zline.                            "MADK991565
   SORT T_DET BY ZSAMMG ZINVNO ZLINE.                     "MADK991565
ENDIF. "MADK933361
ENDFORM.
FORM process.
REFRESH t_data.
CLEAR v_gsttotal.                                         "MADK933361
LOOP AT t_hdr.
Start of MADK933361
    CLEAR: v_target2.
    v_zsammg = t_hdr-zsammg.
    V_ZINVNO = T_HDR-ZINVNO.                                "MADK991565
   AT NEW zsammg.                                         "MADK991565
     AT NEW ZINVNO.                                         "MADK991565
      PERFORM get_gst_value.
    ENDAT.
End of MADK933361
    PERFORM move_header.
    CHECK t_data-zccode IN s_zccode.
    IF p_det = 'X'.
CSF Project Changes Starts   DEV34    MADK985782
    LOOP AT T_DET WHERE ZSAMMG = T_HDR-ZSAMMG..
      LOOP AT t_det WHERE zsammg = t_hdr-zsammg AND
                          zinvno = t_hdr-zinvno.
CSF Project Changes Ends     DEV34    MADK985782
        PERFORM move_header.
        CHECK t_data-zccode IN s_zccode.
        MOVE-CORRESPONDING t_det TO t_data.
        t_data-zamountl = t_data-zamount * t_data-zexrate.
        APPEND t_data.
        CLEAR t_data.
      ENDLOOP.
    ELSE.
      APPEND t_data.
      CLEAR t_data.
    ENDIF.
    AT END OF zsammg.
      CLEAR v_gsttotal.
    ENDAT.
*Start of changes for IS090901289-PIA MADK991565
    AT END OF ZINVNO.
      CLEAR V_GSTTOTAL.
    ENDAT.
*End of changes for IS090901289-PIA MADK991565
ENDLOOP.
ENDFORM.
FORM move_header.
MOVE-CORRESPONDING t_hdr TO t_data.
t_data-zttlamt = t_data-zttlamt + v_gsttotal.             "MADK933361
t_data-waerk = 'SGD'.
IF NOT t_hdr-aedat IS INITIAL.
    WRITE: t_hdr-aedat TO t_data-aedat.
ELSE.
    CLEAR : t_data-aedat.
ENDIF.
READ TABLE t_bl WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_bl-zccode.   "MADK991565
    T_DATA-ZCCODE = T_HDR-ZFCODE.   "MADK991565
    IF NOT t_bl-zbldate IS INITIAL.
      WRITE: t_bl-zbldate TO t_data-zbldate.
    ENDIF.
    t_data-zbl     = t_bl-zbl.
    t_data-type    = 'DBL'.
ELSE.
    READ TABLE t_di WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
    IF sy-subrc EQ 0.
    t_data-zccode = t_di-zdiforcode.     "MADK991565
      T_DATA-ZCCODE = T_HDR-ZFCODE.         "MADK991565
      t_data-type    = 'DI'.
    ENDIF.
ENDIF.
ENDFORM.
FORM display.
IF t_data[] IS INITIAL.
    MESSAGE s398(00) WITH 'No Data Selected'.
    EXIT.
ENDIF.
DATA : l_repid LIKE sy-repid.
l_repid = sy-repid.
REFRESH t_catalog.
CLEAR   t_catalog.
w_layout-cell_merge = 'X'.
PERFORM map_fields.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program      = l_repid
            i_callback_user_command = 'ALV_USER_COMMAND'
            is_layout               = w_layout
            it_fieldcat             = t_catalog[]
            i_grid_title            = sy-title
            i_save                  = 'A'
            it_sort                 = t_sort[]
       TABLES
            t_outtab                = t_data
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
FORM map_fields.
Sort Order
CLEAR v_count.
PERFORM sf USING 'ZDIDBL'   'X' 'X'.
Fields to be displayed
CLEAR v_count.
IF p_hdr = 'X'.
    PERFORM af USING :
   DESCRIPTION       FIELD        LEN   RTABLE             RFIELD
    'DI/DBL         ' 'ZDIDBL'     '14' '                ' '        ',
    'Type           ' 'TYPE'       '04' '                ' '        ',
    'Forwarder Code ' 'ZCCODE'     '14' '                ' '        ',
    'BL Number      ' 'ZBL'        '14' '                ' '        ',
    'BL Date        ' 'ZBLDATE'    '10' '                ' '        ',
    'Invoice Number ' 'ZINVNO'     '15' '                ' '        ',
    'Extraction     ' 'ZSTATUS'    '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
    'Freight Type   ' 'ZTYPE'      '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE   ',
    'Confirmation   ' 'ZCONFIRM'   '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
    'Confirm Date   ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
    'Total Amount   ' 'ZTTLAMT'    '18' '                ' '        ',
    'Created On     ' 'ERDAT'      '10' '                ' '        ',
    'Created By     ' 'ERNAM'      '10' '                ' '        ',
    'Changed On     ' 'AEDAT'      '10' '                ' '        ',
    'Changed By     ' 'AENAM'      '10' '                ' '        '.
ELSE.
    PERFORM af USING :
   DESCRIPTION         FIELD     LEN   RTABLE             RFIELD
    'DI/DBL           ' 'ZDIDBL'   '14' '                ' '        ',
    'Type             ' 'TYPE'     '04' '                ' '        ',
    'Forwarder Code   ' 'ZCCODE'   '14' '                ' '        ',
    'BL Number        ' 'ZBL'      '14' '                ' '        ',
    'BL Date          ' 'ZBLDATE' '10' '                ' '        ',
    'Invoice Number   ' 'ZINVNO'   '15' '                ' '        ',
    'Extraction       ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
    'Freight Type     ' 'ZTYPE'    '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE   ',
    'Confirmation     ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
    'Confirm Date     ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
    'Total Amount     ' 'ZTTLAMT' '18' '                ' '        ',
    'Freight Payment ' 'ZFPTYPE' '14' '                ' '        ',
    'Charge Code      ' 'ZCHRCODE' '10' '                ' '        ',
    'Currency         ' 'ZCURCODE' '08' '                ' '        ',
    'Quantity         ' 'ZQTY'     '13' '                ' '        ',
    'UoM              ' 'ZUOM'     '04' '                ' '        ',
    'Rate             ' 'ZRATE'    '15' '                ' '        ',
    'Amt(Foreign Curr)' 'ZAMOUNT' '16' '                ' '        ',
    'Exchange Rate    ' 'ZEXRATE' '13' '                ' '        ',
    'Amt(Local Curr) ' 'ZAMOUNTL' '16' '                ' '        ',
    'Created On       ' 'ERDAT'    '10' '                ' '        ',
    'Created By       ' 'ERNAM'    '10' '                ' '        ',
    'Changed On       ' 'AEDAT'    '10' '                ' '        ',
    'Changed By       ' 'AENAM'    '10' '                ' '        '.
ENDIF.
ENDFORM.
FORM af USING text
              field
              len
              table
              reffield.
v_count = v_count + 1.
w_catalog-col_pos       = v_count.
w_catalog-fieldname     = field.
w_catalog-ref_tabname   = table.
w_catalog-ref_fieldname = reffield.
w_catalog-seltext_s     = text.
w_catalog-seltext_m     = text.
w_catalog-seltext_l     = text.
w_catalog-outputlen     = len.
IF field = 'ZTTLAMT' OR field = 'ZAMOUNTL'.
    w_catalog-no_zero     = 'X'.
    w_catalog-cfieldname = 'WAERK'.
    w_catalog-datatype    = 'CURR'.
ENDIF.
IF FIELD = 'ZRATE' OR FIELD = 'ZAMOUNT'.
IF field = 'ZAMOUNT'.
    w_catalog-no_zero     = 'X'.
    w_catalog-cfieldname = 'ZCURCODE'.
    w_catalog-datatype    = 'CURR'.
ENDIF.
IF field = 'ZQTY' OR field = 'ZRATE'.
    w_catalog-no_zero     = 'X'.
    w_catalog-datatype = 'DEC'.
ENDIF.
APPEND w_catalog TO t_catalog.
CLEAR w_catalog.
ENDFORM.
FORM sf    USING   fieldname sortup group.
v_count = v_count + 1.
CLEAR w_sort.
w_sort-fieldname = fieldname.
w_sort-spos      = v_count.
w_sort-up        = sortup.
w_sort-group     = group.
APPEND w_sort TO t_sort.
ENDFORM.
FORM alv_user_command USING in_ucomm    LIKE sy-ucomm
                             in_selfield TYPE slis_selfield.
DATA: lfs_data LIKE t_data.
IF in_ucomm = '&IC1'.
    READ TABLE t_data INDEX in_selfield-tabindex INTO lfs_data.
    CHECK NOT lfs_data-zdidbl IS INITIAL.
    IF lfs_data-type = 'DBL'.
      DATA: l_zdbl LIKE zmsd_diheader-zdinum.
      l_zdbl = in_selfield-value.
      EXPORT l_zdbl TO MEMORY ID 'VBL'.
      CALL TRANSACTION 'ZMSD_BL01'.
    ENDIF.
    IF lfs_data-type = 'DI'.
      DATA: v_dinum LIKE zmsd_diheader-zdinum.
      v_dinum = in_selfield-value.
      EXPORT v_dinum TO MEMORY ID 'VDI'.
      CALL TRANSACTION 'ZMSD_DI01'.
    ENDIF.
ENDIF.
ENDFORM.
FORM get_gst_value.
LOOP AT t_det WHERE zsammg = v_zsammg
     AND ZINVNO = V_ZINVNO.                              "MADK991565
    CHECK t_data-zccode IN s_zccode.
    t_det-zamount = t_det-zamount * t_det-zexrate.
    SELECT SINGLE y0mmtarget2
            INTO   v_target2
            FROM   y0mmipstranslate
            WHERE y0mmdatatype = '70' AND
                   y0mmsource = t_det-zchrcode.
    SELECT SINGLE y0mmtarget1
           INTO   t_det-type
           FROM   y0mmipstranslate
           WHERE y0mmdatatype = '76' AND
                  y0mmsource = v_target2.
    IF t_det-type NE '3Z'.
      v_gsttotal    = v_gsttotal +
                           ( t_det-zamount * 5 / 100 ).
    ENDIF.
ENDLOOP.
Regards,
Raj.

Hello,
Following is the procedure to convert alv output to spool and then it to PDF Format.
After we display the ALV, we can check whether it is running in the background using system field u2018sy-batchu2018. Then,we call an function module named u2018GET_JOB_RUNTIME_INFOu2019 to get the current job information. Then go to spool request table tbtcp to get the spool id.
Get current job details
CALL FUNCTION u2018GET_JOB_RUNTIME_INFOu2019
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                           AND jobcount = gd_jobcount
                           AND stepcount = gd_stepcount
                           AND listident <> u20180000000000u2032
                           ORDER BY   jobname
                                               jobcount
                                               stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
Finally, we can call function module u2018CONVERT_ABAPSPOOLJOB_2_PDFu2018 to convert spool reqeust(which is stored in OTF format) to PDF format. Then we can call either function module u2018SO_DOCUMENT_SEND_API1u2032 or SAP BCS (Business Communication Service) to send the pdf as an email attachment.
CALL FUNCTION u2018CONVERT_ABAPSPOOLJOB_2_PDFu2019
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount = gd_bytecount
       TABLES
            pdf = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
Regards,
Sayali
Edited by: Sayali Paradkar on Apr 20, 2010 12:51 PM

ISA B2B logon Error: No valid private connection for internet user

Hello ,
i used isauseradm to create a user zzweb with all authorizations for B2B..
now when i try to log to
http://host:port/b2b/b2b/init.do with the user zzweb
i have a runtime error with the logs :
EXCEPTION]
#1#com.sap.isa.businessobject.BORuntimeException: Error getting private connection for internet user:com.sap.isa.core.eai.BackendException: Error: No valid private connection for internet userzzweb
     at com.sap.isa.businessobject.BusinessObjectHelper.splitException(BusinessObjectHelper.java:78)
     at com.sap.isa.user.businessobject.UserBase.login(UserBase.java:313)
     at com.sap.isa.businessobject.User.login(User.java:143)
     at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:295)
     at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:368)
     at com.sap.isa.user.action.UserBaseAction.performLogin(UserBaseAction.java:126)
     at com.sap.isa.user.action.LoginBaseAction.ecomPerform(LoginBaseAction.java:77)
     at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
     at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
     at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
what does this error means..?
i also realised that zzweb was not created in CRM backen? should it be created ?
many thnx for help ..
Message was edited by: Blackman

Its a late response... but if someone gets the same issue here is the solution.
When you register try uppercase password . That should take care of that issue.
The problem is with function module CRM_ISA_IUSER_SWITCH , Note 946536.
Although the note says 5.0 the problem exists with ISA 4.0 too

Connecting a new computer through linksys router

I have a WRT54G wireless router ... I want to connect a new laptop through it ... but I need either a network key or a password ... cant locate these .. can anyone help?

To get network key, connect your computer to one of the four ports on router using ethernet cable. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. Go to wireless tab. Go to wireless security sub-tab. If security mode is wpa or wpa2 note down passphrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key

Enabling a User through OIM API

Hi I am trying to enable a user through OIM API, However the end date is already passed for that user, I am setting up a new end date through the Program (showm below). However the update user is not working (i am not sure).
Map usermap = new HashMap();
usermap.put("Users.User ID", User_id );
Map grpmap = new HashMap();
grpmap.put("Groups.Group Name", Group_Name);
tcResultSet ts = userClient.findUsers(usermap); //find all users
String existing_end_date = ts.getStringValue("Users.End Date");
tcResultSet tg = groupClient.findGroups(grpmap); //find requireq group
long ukey = ts.getLongValue("Users.Key");
long gkey = tg.getLongValue("Groups.Key"); //find group key
// ENABLE THE USER
java.util.Date new_end_date = new java.util.Date(111,1,1);
Calendar cal = Calendar.getInstance();
cal.setTime(new_end_date);
DateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd hh:mm:ss");
String Str1 = dateFormat.format(cal.getTime());
String Str2 = existing_end_date + " 12:00:00";
System.out.println(User_id+" OLD End Date:" + Str2 + " New End Date: " + Str1);
Map usermap2 = new HashMap();
usermap2.put("Users.User ID", User_id );
usermap2.put("Users.End Date", Str1);
userClient.updateUser(ts,usermap2);
userClient.enableUser(ukey);
I am getting the following error:
U0000018 OLD End Date:2009-09-30 12:00:00 New End Date: 2011-02-01 12:00:00
2/12/2010 15:02:53 oracle.j2ee.rmi.RMIMessages EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER
WARNING: Exception returned by remote server: {0}
Thor.API.Exceptions.tcAPIException: The user cannot be enabled because the end date is passed.
Not sure why it is happening. It looks like the Updateuser is not working, or something else?
Please advise. Thanks in advance.

Hi Suren,
thanks for the note.
I found that as soon as I enable the user, I am getting the followimg messages in the opmn logs:
INFO,06 Dec 2010 10:55:41,841,[XELLERATE.JAVACLIENT],System Event Handler: Validating Organization for an User.
INFO,06 Dec 2010 10:55:41,944,[XELLERATE.JAVACLIENT],System Event Handler: Triggering Processes related to User.
INFO,06 Dec 2010 10:55:42,402,[XELLERATE.JAVACLIENT],System Event Handler: Enabling the User
INFO,06 Dec 2010 10:55:42,421,[XELLERATE.JAVACLIENT],System Event Handler: Validating Organization for an User.
INFO,06 Dec 2010 10:55:42,427,[XELLERATE.JAVACLIENT],System Event Handler: Triggering Processes related to User.
INFO,06 Dec 2010 10:55:42,439,[XELLERATE.JAVACLIENT],System Event Handler: Changing application data based on Organization change.
INFO,06 Dec 2010 10:55:42,442,[XELLERATE.JAVACLIENT],System Event Handler: Auto-Group Membership Event.
INFO,06 Dec 2010 10:55:43,715,[XELLERATE.JAVACLIENT],System Event Handler: Evaluating User Policies
So, the access policies are getting evaluated, triggering provisioning processes.
What I am planning to do is, to disable the access policies and try to run the Program.
Because of this issue, my Program is throwing an error (until I looked into the opmn logs, it doesn't make sense).
6/12/2010 10:55:50 oracle.j2ee.rmi.RMIMessages EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER
WARNING: Exception returned by remote server: {0}
Thor.API.Exceptions.tcAPIException: Error occurred enabling Xellerate User instance.
Regards
Vijay Chinnasamy

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Audit directory and searching through the logs for deleted file

Windows Server 2003
I have found article http://whatevernetworks.com/?p=108
And in description of this article is: to found deleted files in auditing directory I have to found event 560.
But I have about 60 000 events.
My file abcd.txt is missing and I have to find who delete it, but I cant click 60 000 times to find it.
Moreover most of that event looks like its objcect open not object deleted.
How to find this particular?
Event Type:   Success Audit
Event Source:   Security
Event Category:   Object Access
Event ID:   560
Date:       2/23/2014
Time:       11:48:00 PM
User:        DOMAIN\user
Computer:   PLWAW1FS00003
Description:
Object Open:
    Object Server:   Security
    Object Type:   File
    Object Name:   E:\Temp\download.domain.com\example.zip
    Handle ID:   1788
    Operation ID:   {0,477992664}
    Process ID:   1692
    Image File Name:   C:\WINDOWS\system32\xcopy.exe
    Primary User Name:    user
    Primary Domain:    DOMAIN
    Primary Logon ID:   (0x0,0x1C7D2FA0)
    Client User Name:   -
    Client Domain:   -
    Client Logon ID:   -
    Accesses:   DELETE
           READ_CONTROL
           WRITE_DAC
           WRITE_OWNER
           SYNCHRONIZE
           ACCESS_SYS_SEC
           ReadData (or ListDirectory)
           WriteData (or AddFile)
           AppendData (or AddSubdirectory or CreatePipeInstance)
           ReadEA
           WriteEA
           ReadAttributes
           WriteAttributes
    Privileges:   SeBackupPrivilege
           SeRestorePrivilege
    Restricted Sid Count:   0
    Access Mask:   0x11F019F
Find fields are: Information/Warning/Error/Succes/Failure
Event source: DS/IIS/LSA etc...
Event ID:
User:
Computer:
Description:
and no filename, or action.
Maybe I can use powershell to search through the logs?

Hi,
You can use Custom View and XML filter to filter specific event logs. Firstly, create a custom view. Then type an XML query to filter by ObjectName (abcd.txt).
For more detailed information, please refer to the article below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Not able to connect with Oracle server through VBScript without DSN

Hi
I have both Oracle9i and Oracle10g clients installed with local system.
I am able to connect to Oracle Database 11g Enterprise edition server though sqlplus through command prompt and also through AQT without any error.
As the server has lots of database ,whenever I connect to a particular database through sqlplus from command prompt,I connect as below
C:>sqlplus username/password@service_name
and it gets connected without any error.
When I am trying to connect the same database through VB Script,I am getting ORA-12560 TNS:Protocol Adaptor Error.
Below is the connection string I am using:
Database_String = "SERVER=xxxx.vvvn.Com;Driver={Oracle in OraHome92};DATABASE=service_name;user id=userid; password=passowrd"
I have installed a Oracle10g server in my local system and tried to connect the same way and I was successfully ,but its not working when the server is running remotely.
Does it make any difference with the version of driver being used ?Should I need to modify my connection string anyway.
Please help me as to identify the issue.Thank you very much in advance.
Regards
Sahina

check the listener status in server end,
lsnrctl status
lsnrctl servicesif not start
lsnrctl startThanks

How to execute a transaction with a different user from the logged user?

Hello Experts!
I'm trying to find out a solution about this scenario: our users need to release a Purchase Order (ME28) and/or a Service Entry Sheet (ML85) in SAP from a WEB based application through TIBCO, but the requirement is to execute this operation with the same SAP User name of the user (with his authorization) and not with the TIBCO user that is logged to SAP.
Is there someone that could suggest me a real time solution and how to develop it? I really appreciate your contribute and I'm at your disposal for any further information.
Thank you very much!
Alessandro

Hi Rob!
Thank you for your help, but I can't apply this solution, because we need to execute the transaction with a specific user name and not a generic user, besides our user have different authorization, for example the user Mr. Rossi can release only his Purchase Order but not the PO of another user Mr. Bianchi. Moreover we need to see the PO released/modified from a specif user name. So this is our constraint.
Bye Ale.

ISight - connects with windows users no problem?

I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens

When I connect my electric acoustic through an audio jack to usb there is a delay between playing and recording. Can this be overcome?

when I connect my electric acoustic through an audio jack to usb there is a delay between playing and recording. Can this be overcome?

Hi johnbwebster,
Welcome to the Support Communities!
The Logic Express 9 Manual shows how to Adjust the "Recording Delay" in the Audio Preferences:
Click on the link below for more information and screen shots:
Logic Express 9 User Manual: Audio Preferences in Logic Express
https://documentation.apple.com/en/logicexpress/usermanual/index.html#chapter=43 %26section=4%26tasks=true
Cheers,
- Judy

Unable to connect to the database through OEM

Hi,
ORACLE VERSION: 10.2.0.1.0
OPERATING SYSTEM:LINUX
I was unable to connect to my database through OEM.It is showing error like this in my OEM .
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
The below is the list of errors written in the trace file .
2009-07-13 14:55:18,351 [EMUI_14_55_18_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
     at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1901)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:211)
     at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:773)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:396)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
     at oracle.sysman.eml.app.Console.doGet(Console.java:135)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:123)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
2009-07-13 14:55:20,893 [HttpRequestHandler-25640626] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:20,925 [HttpRequestHandler-25640626] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:20,926 [HttpRequestHandler-25640626] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:55:20,959 [HttpRequestHandler-23946437] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:20,990 [HttpRequestHandler-23946437] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:20,991 [HttpRequestHandler-23946437] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:55:42,047 [OmsServiceDriver thread] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,030 [HttpRequestHandler-12767107] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,062 [HttpRequestHandler-12767107] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,063 [HttpRequestHandler-12767107] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:55:51,096 [HttpRequestHandler-28346522] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,127 [HttpRequestHandler-28346522] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,127 [HttpRequestHandler-28346522] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:56:21,162 [HttpRequestHandler-32110028] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:56:21,193 [HttpRequestHandler-32110028] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:56:21,194 [HttpRequestHandler-32110028] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:56:21,227 [HttpRequestHandler-12767107] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:56:21,258 [HttpRequestHandler-12767107] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:56:21,259 [HttpRequestHandler-12767107] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)

Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
Don't say password is correct, if password is correct then tell us what last changes you did. did you change SYSMAN password throught alter user ...identified ... ?
Regards,
Taj

Connect invoice to user through WF log

Similar Messages

Maybe you are looking for