Connect Multiple Ingrian server in same JVM

Hi All,
I have faced an issue where I have to connect multiple Ingrain server depending on some choice in same JVM.However I can able to set one server for jvm by placing the IngrianNAE.jar and IngrianNAE.properties in jre/lib/ext and every things running well, but if I tried to modify the Ingrain properties file during runtime through System.setProperties(), it always pick the old value instead the new one. So my question is that whether it is possible to configure for same JVM or not.
Thanks & Regards

Any Inputs...?

Similar Messages

Tries to connect multiple times at the same time a...

Tries to connect multiple times at the same time after trying to reinstalling software.

Hello,
Assuming that you use a Web version (this information MUST be provided in any post), you have 2 ways to run reports:
1. the Run_Report_Object built-in
2. the Web.Show_Document() built-in
Francois

Connecting multiple ECC Clients on same ECC system to BW system(s)

Hello.
We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about? Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'? Any and all comments are welcome as we have not yet acted on our ideas yet.
Thanks very much for whatever comments you might provide,
Geoff.

We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
No impact on the BW system. The only thing that you will have to take care of is that any process chains which fetch data from this DEV ECC system should not be put on periodic cycle because after disconnecting the ECC system, these would start failing.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about?
Again no impact on ECC system. As for the client connected earlier to sandbox system, just clear all the queues in RSA7, LBWQ
Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'?
No its not at all a bad practice

Is it possible to have multiple SOA Server within same domain ?

Hi All
I need to know whether I can install and setup multiple soa_servers inside the same domain so that they can be managed by single weblogic instance.
The use case scenario :
We have a single DEV environment instance that has several environments configured with it like PR1, PR2, TR, PY, PC.
The way we have achieved it is by creating partitions under soa_infra and deploying the code as we move up the ladder in testing phases before we move to separate QA and Prod.
Because of the way Dev is being setup, we are not able to use/test Oracle B2B properly because there is no way to have environment specific distinction be created in Oracle B2B.
In essence, at any point in time testing can happen only in one environment for out Dev box because it makes call to Oracle B2B (Trading Partners) and there is no way for us to distinguish whether the call is coming from PR1 or PR2 or PC or TR or PY.
We have no issue testing it as long as it is not restricted to B2B but with B2B we are restricted because a single soa instance has a single B2b instance. ( We can not have partition wise instances of B2B)
Requirement :
Is it possible to install and configure different soa_server for.e.g
soa_server1 : PR1
soa_server2 : PR2
soa_server3 : PY
soa_server4 : PC
soa_server5 : TR
inside the same domain (dev_domain) so that they can be managed from single weblogic instance through Admin console and we can have different B2B instances for each soa_server.
This way we will be able to differentiate between environments on the basis of ports with the same IP address.
Please let me know if there is a possibility of achieving the same.
Thank you so much in advance.
Regards
ACM

Thanks Sharmela for your directions.
Let me try to clone the soa server and see if it helps.
Before I move forward, I would like to verify one thing from you.
As you have mentioned the word "cluster" , I am not exactly trying to achieve the clustered setup "conventional way of load balancing and high availability" but instead I want to have these cloned soa servers( soa_server1 : 8001,soa_server2 : 8002,soa_server3 : 8003,soa_server4 : 8004,soa_server5:8005 )to have separate partitions ( PR1, PR2, PY, TR,PC) respectively.
I hope I don't have to configure OHS to access these nodes since I want these nodes be available as a separate instance rather than redirecting load in case of any other becoming unresponsive ( OHS configuration)
I am not sure whether I am making sense but all I need to do is point the PR1 instance having it's own port number(8001) to the PR1 instance of ERP.
I think it is doable but just wanted to double check with you.
Please let me know
Thank you

Transformation issue while connecting multiple source system of same type..

Hi,
I'm working on APO-BW integration project. I want to connect BW QA & BW PROD to APO QA. I've already connected BW QA to APO QA & it is fetching data correctly. RFC part & other BASIS part is already taken care of. I've done export datasource (for mater data, cube etc) in BW PROD & replicated in APO QA. All BW PROD datasources are imported as RSDS (7.X) in APO QA.
Now my question is how to make sure the transformations will take source system as BW PROD too? I want 2 datasources (one from BW QA & other from BW PROD) to connect to same inforprovider in APO. I've transported 7.x datsource from APO DEV to APO QA environment along with transformations. In conversion of logical system names in APO QA I've given source system -BW DEV & target system - BW QA. So the transformation automatically takes data source as BW QA. It doesn't take source-system - BW DEV & target system - BW PROD as it conflicts previous setting.
Is only option that I need to manually maintain transformation from BW PROD datasource or there's another better alternative?

HI,
You are getting multiple IDOCs into BPM. But output you are getting one message right? IF so, your N:1 Mapping is not done correctly.
i.e your target message type should have occurence of 1..n and also the interface mapping. Closely obsever the N:1 mapping done in the BpmPatternCollectMerge.
Also go to SXMB_MONI->PE and check the Technical Details to make sure that, you are getting multiple IDOCs and you are executing the N:1 Transformation step correctly.
Also in the N:1 Mapping, check out the context you used. Make it root . Then test the mapping independently in the Integration Repository.
Hope it helps,
Regards,
Moorthy

What can't client connect to RMI server on same machine?

I'm trying to get a client to connect to an RMI server that resides on the same machine, but it's not working. When run, I get the following exception:
java.rmi.ConnectException: Connection refused to host: 121.0.0.55; nested exception is:
java.net.ConnectException: Connection refused
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:320)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:273)
at java.net.Socket.<init>(Socket.java:100)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:25)
The machine in question is a Solaris 8 system running Java 1.3. I've checked all the networking permissions, and they seem to be ok. Any ideas as to what might be causing this?

Thanks for the reply! Dumb question: How do I start the registry? I see debugging code that indicates that the server is [probably] being started.
Usually this means that the registry isn't running or
the server isn't running.

Mixing multiple rmi protocols in same jvm

We are having to build a gateway between Javelin's Coppelia server and
WLAS 6.0. Coppelia has its own rmi implementation and WLAS has its T3
protocol. Is it possible to mix connections between both of them in one
jvm. It would seem ok and we are tying to test it now but wanted to get
confirm from BEA folks.

"Larry Presswood" <[email protected]> wrote in message
news:[email protected]..
We are having to build a gateway between Javelin's Coppelia server and
WLAS 6.0. Coppelia has its own rmi implementation and WLAS has its T3
protocol. Is it possible to mix connections between both of them in one
jvm. It would seem ok and we are tying to test it now but wanted to get
confirm from BEA folks.Larry,
We've not tested this configuration. However I can't think of anything off
hand that would prevent it from working. Let me know how it goes, I'd be
happy to try to help if something comes up.
Good luck!
Adam

Create connection multiple database server connection with sinle client

My problem is like this. I have 3 database servers like server A,server B,Server C. First Client will communicate with server A and Server B at the same time. Then if the connection is done then i need communicate with server C. Is there anybody who has the sample code for this. Please help me i am facing problems with this.

I want to build a web site using jsp servlet for my university course purpose. In the background i will have three servers one is database server like server A another is certificate authority server like server B and the other one is Bank server like server C. Next, user will input through login page(say for example user name & password for database server A, certificate credentials for server B) then the login page will check user credentials kept in server A and at the same time with server B(CA server). If the user credentials kept in both of these servers(A &B) are matched then the page will inform that this is the valid user and connect to the bank server for money transaction. I hope now the my problem is clear to you. please answer me how can i prepare for that.
what are the concepts related to that and have any demo code which i can use for that purpose.

Simultaneously Connecting Multiple Tables of the same Database to Textboxes of the same Form using a single ADO Control Code using VB6 Enterprise Edition and MS Access 2007

Iv 10 Tables consisting of atleast 10 fields each in a single Database. Bt, Im only able to connect 1 table at a time to a form using an ADO Control. Im able to add data from table 'student' to text-boxes in my form. Bt, hw can I add data from field(0) of
Table 'Student' to Textbox1 and data from field(0) of Table 'Marks' to Textbox2 using VB6??
This is the current sample coding iv got to connect a single table to a form:
Global con As New ADODB.Connection
Global rs As New ADODB.Recordset
Public Function Connect()
If con.State = 1 Then con.Close
con.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + App.Path + "\bca.mdb;Persist Security Info=False"
End Function
Private Sub Add_Click()
If rs.State = 1 Then rs.Close
rs.Open "select * from student", con, adOpenDynamic, adLockOptimistic
rs.AddNew
rs.Fields(0) = (Text1.Text)
rs.Fields(1) = (Text2.Text)
rs.Fields(2) = (Text13.Text)
rs.Fields(3) = (Text4.Text)
rs.Fields(4) = (Text5.Text)
rs.Fields(5) = (Text6.Text)
rs.Fields(6) = (Text7.Text)
rs.Fields(7) = (Text8.Text)
rs.Fields(8) = (Text9.Text)
rs.Fields(9) = (Text10.Text)
rs.Fields(10) = (Text11.Text)
rs.Update
MsgBox " Record Added"
End Sub
What can I do to add fields from 2 different tables to different text boxes within the same form using a single ado control using vb6 and MS Access 2007??

Hi,
Since VB6 product is not supported in this forum, you may go to these forums for support:
#Where to post your VB 6 questions
http://social.msdn.microsoft.com/Forums/en-US/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b/where-to-post-your-vb-6-questions
Thank you for your understanding.
Best regards,
Franklin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Multiple Java Apps in same JVM

Hi,
I have created a shell script which calls my java application with heap size as below:
/bin/java -Xms:3072M -Xmx:3072M ...
I'm calling the shell script multiple times in the background to create multiple instances of my java application in the same box. I have set a limit of 5 for java applications at any point of time. But what I'm experiencing is that first few sets of java application finish very fast (almost 3 mins) but last few sets taking a lot of time (around 10 mins). The quantity of data processed by all java applications is same but why later sets of java application is taking longer?
Can I do something here so that later sets of apps also completes in 3 mins? Can I refresh java heap before submitting another set of java applications? Java application is not mine but I have purchased from 3rd party. Please help!!!
Thanks in advance.

> why later sets of java application is taking longer?
Probably because of CPU usage. But could be memory.
>Can I do something here so that later sets of apps also completes in 3 mins
You tune the task, the complete task, to the box. That means you must understand in detail what is taking time and then architect that to make the best use of the available CPUs and memory (and other resources as used by the task.)

Connecting multiple C4C tenants to same HCI system

Hello Experts,
Please note that we already have a Cloud For Customer (C4C) system connected to our HCI system which is connected to our ERP system.
How can I connect another new C4C system to the same HCI system as above which connects to the same ERP backend system QEC.
Would this new C4C system use the same tenant/worker nodes or will there be a separate new one be created for this new C4C system.
Please let us know what is the best possible approach.
Regards
Indrasish

Hi Indrasish
THere are probably a couple of options. One is to adjust HCI to send to two receivers. We'd need to look more at how the data needs to flow.
The other is to have duplicate setup -the following is what we do for a training environment with mutliple C4C's connected to one HCI and one ERP:
* C4C tenants have the communication system for ERP that points to HCI
* If you will have the same iflow from the ERP to each tenant, e.g. material master from ERP to C4C tenant1, material master from ERP to C4C tenant 2 - then you need to do the following:
*** HCI import the iflow, rename the iflow and the manifest. When you deploy you will also need a unique name. for example: /cxf/ERP/COD/ADR3MAS03_TR99 - deploy the service with the extension
*** in ERP in the RFC destination to HCI you need to also adjust the RFC dest, for example, /cxf/ERP/COD/ADR3MAS03_TR99 so that the deployed iflow name matches.
*** the deployed iflow also has the updated URL for the related C4C tenant.
In this situation you have duplicate iflow for each C4C tenant. The other option is to use one iflow and have two receivers, this would assume everything always goes to both tenants.
Does this make sense or is it confusing?
-ginger

Can one connect multiple NetStreams to the same peerID?

Does it make sense to have two separate netstreams connected to the same remote p2p connection?
I think I would like to separate the audio and video publishing and playing so that I can fine tune permissions (e.g. publish audio but not video to some users but not others).
Equally, are there issues with publishing two separate NetStreams on the same p2p connection?
Initially I thought this would be possible, but I am having problems playing streams when connecting users on different ip addresses.

You can play or publish as many streams as you wish on the same connection. Just mind the bandwidth.
However, publishing audio and video on different streams may not be a good idea as they're sure to be out of sync.
To save bandwidth and play only the audio of an audio/video stream set NetStream's receiveVideo to false.
Or, in your fine-tuned permissions scenario, you can publish one stream with audio only and one with audio/video. A little redundant but audio datarate is small and may be worth it.

Connecting multiple DAQs into the same computer

Hi,
Im working in a project where i wil need to connect more than 300 digital signs with a USB port.
I was looking for options, and found two that i liked, but i dont know if LabView will have troubles reading all the signs from different DAQs.
My first option is the USB-6501 (with 24 digital I/O), where Ill start doing the config, but if it works for what im looking for, i was expecting to repeat the same config in a total of 13 DAQs
My second option was, the High-Density Industrial I/O for USB (96 channels digital), and have in total 3 DAQs with an extra of the USB-6501 to complete my set of signals.
Can I connect more than one DAQs into the same computer? Meaning that all the DAQs will be working into the same LabView app?
Regards,
LD
Solved!
Go to Solution.
Attachments:
High-Density Industrial Digital I_O for USB – 96-Channel, 5 V TTL_CMOS - Data Sheet - National Instruments.pdf ‏1126 KB
NI-Datasheet-ds-135.pdf ‏525 KB

Those modules are static DIO, so the bandwidth of the USB shouldn't be an issue. As nyc mentioned, you might run into problems with the current draw on your USB port. Definitely get an independently powered USB hub.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Multiple Forms Server on same machine

Currently I'm running a development forms server instance on a Sun SPARC server. The client would like to have a QA environment set up on the same server.
Must I install Forms Server to another, separate home directory?
Has anyone else tried this? The development and QA user population is small; < 25 in total.
Thanks,

Check this doc
Common Tasks Performed in the DAC
Mark if helps
~ http://cool-bi.com

How connect multiple swf in the same app for iOS

Hello,
i have a problem.
i have a lot of swf file each one is linked to another: i have a menu page with botton linked to different games (one swf for game).
Now i need to convert all of this in an app for iPad.
My question is: which is the easiest way to create link between all my swf files?
I read a lot of things but i really don't understand how i can move.
Thx for Help,
Stefano

ok, this is the way to add file in my app (if is correct i already have the appname.xml file);
but what about navigateToURL? can i use that or i have to use another script? can you make me an example of script ?
using this script i found the following problem:
var _urlRequest:URLRequest = new URLRequest(“mySecondarySwf.swf”);
var _loader:Loader = new Loader();
var _lc:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain, null);
_loader.load(_urlRequest, _lc);
addChild(_loader)
using this script testing the app on computer the new swf is added on stage, but unfortunately i see the object of first and of second swf (overlapping...and i don't want that)
but publishing the app for testing device (ipad) the second swf is not loaded on screen...
what is wrong?
thanks

Connect Multiple Ingrian server in same JVM

Similar Messages

Maybe you are looking for