Connect to Airdisk from a PC outside my network?
Title says it all. I can connect just fine to my APE's Airdisk from a PC while inside my network, but not from anywhere else. It just hangs there & finally says its not found. Macs from across the internet connect just fine only using the IP address inside the Finder/Connect To Server (Command+K) option.
Am I missing something simple? Bonjour & share over WAN are both checked. Do I have to turn on some kind of Port Mapping for the disk or disable some firewall on the PC??
BTW, im just connecting the standard way by right-clicking on Start/Explore option in XP & mapping a new network drive with \\myipaddress\diskname Inside my home network this method works great, but thats the only place I can get it to work.
Im really stuck & would GREATLY appreciate any insight you guys can give. Thanks!!
Did you ever get this working? I am trying to do the same and am unsuccessful.
Similar Messages
-
Connecting to mpd over the Internet (outside home network) - error
I'm trying to connect to an mpd instance running on my home computer from my computer at work. I have an OpenVPN server at home, and so I can securely connect to my home network from work. I've set up a second instance of mpd and icecast at home, and I'm trying to connect to this at work. I can connect to the extent of being able to pull my library, playlist info over, but I can't actually seem to play anything.
When I look at the mpd error messages, I find:
shout_output: Failed to open "exelion HD mpd stream" [shout]: problem opening connection to shout server localhost:8000: Login failed
output: Failed to open audio output
I'm trying to connect using Cantata (which I use at home and like).
Things I've played with:
originally in my mpd config I had:
user "source"
I tried commenting that out and just letting mpd use whatever the default user is, but that didn't seem to help.
The other thing I wonder about but haven't tried is different settings for "admin-user" in the icecast config.
I currently have
<admin-user>my-home-usernamer</admin-user>
. Should I change this to "admin"? Does it matter?
The passwords match between the mpd and icecast configs.Foucault wrote:Just in case you are not aware of it, MPD has built-in HTTP streaming to mp3/ogg/whatever. Unless you need any of the more advanced Icecast features, just use the httpd audio_output and get done with it.
Thanks. I didn't know that. But that seems much easier. I tried this, but I'm still having trouble. From the mpd server I get the following report:
path: SetFSCharset: fs charset is: UTF-8
libsamplerate: libsamplerate converter 'Fastest Sinc Interpolator'
vorbis: Xiph.Org libVorbis 1.3.4
opus: libopus 1.1
sndfile: libsndfile-1.0.25
db: reading DB
curl: version 7.40.0
curl: with OpenSSL/1.0.2
avahi: Initializing interface
avahi: Client changed to state 2
avahi: Client is RUNNING
avahi: Registering service _mpd._tcp/Music Player
avahi: Service group changed to state 0
avahi: Service group is UNCOMMITED
avahi: Failed to add service _mpd._tcp: Local name collision
state_file: Loading state file /home/user/.mpd/icecast-state
server_socket: bind to '0.0.0.0:8000' failed: Address already in use (continuing anyway, because binding to '[::]:8000' succeeded)
playlist: play 0:"Bob Marley/Bob Marley & the Wailers (1972-1980) - The Unreleased Studio Sessions/Disc 01 - The 'Catch A Fire' Sessions/1-01 Concrete Jungle (Studio Demo).mp3"
replay_gain: replay gain mode has changed -1->1
replay_gain: scale=1.000000
replay_gain: replay gain mode has changed -1->1
replay_gain: scale=1.000000
config: option 'quality' on line 19 was not recognized
playlist: queue song 1:"Bob Marley/Bob Marley & the Wailers (1972-1980) - The Unreleased Studio Sessions/Disc 01 - The 'Catch A Fire' Sessions/1-02 Slave Driver (Studio Demo).mp3"
decoder: audio_format=48000:24:2, seekable=true
client: [0] opened from 192.168.1.5:53478
client: [1] opened from 192.168.1.5:53479
client: [1] process command "channels"
client: [1] command returned 0
client: [1] process command "idle"
client: [1] command returned 1
client: [0] process command "status"
client: [0] command returned 0
client: [0] process command "stats"
client: [0] command returned 0
client: [0] process command "urlhandlers"
client: [0] command returned 0
client: [0] process command "tagtypes"
client: [0] command returned 0
client: [0] process command "currentsong"
client: [0] command returned 0
client: [0] process command "replay_gain_mode off"
replay_gain: replay gain mode has changed 1->-1
replay_gain: replay gain mode has changed 1->-1
client: [0] command returned 0
client: [0] process command "listallinfo"
buffered_socket: error on client 0: Output buffer is full
client: [0] command returned 0
client: [0] closed
client: [2] opened from 192.168.1.5:53480
client: [2] process command "playlistinfo"
client: [2] command returned 0
client: [2] process command "status"
client: [2] command returned 0
client: [2] process command "status"
client: [2] command returned 0
client: [2] process command "listallinfo"
buffered_socket: error on client 2: Output buffer is full -
Connection to Oracle from remote computer in local network
I have local network with two computers: WinXP with Oracle 10g and Vista with Oracle Client tools. I need to connect to the Oracle 10g from the client PC with sqlplus and with Enterprise Manager Console. Sqlplus returns ORA-12154 error, EM console returns ORA-12541 error.
Is the problem in configuration of listener.ora, tnsnames.ora and sqlnet.ora on the server side and on the client side? They look like this:
Server side:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
# sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
Client side:
# tnsnames.ora Network Configuration File:
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
# sqlnet.ora Network Configuration File: C:\oracle\product\10.2.0
SQLNET.AUTHENTICATION_SERVICES= (NTS, EZCONNECT)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Are these files configured fine? Or do I have to configure also something else? When I do tnsping 10.0.0.9 from the client, the result is OK. So what is wrong? Thanks a lot for help, Petr.Sqlplus returns ORA-12154 error, EM console returns ORA-12541 error- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
HTH -
How do I access my Airdisk from the Internet?
Hello,
I have been scouring the web for the answer to this, and have found very little, why doesn't Apple help out more with this. They say it is possible, just not how to do it.
My AE is bridged to my ISPs Netgear router which supports dyndns. I've created an account with dyndns.com and when entering the details into my router, it successfully automatically updates it. This is probably the first hurdle in getting web access to my disk that other people may not have? But what do I do next?
I can access my Airdisk within my home network and have told my AE to share and advertise via Bonjour, but are the Bonjour wide-area hostname settings the same settings as my dyndns account? I've read that the hostname is a single name that I've selected on dyndns.com and the domain is dnsalias.net, then Name and Password is the same as my dyndns account?
Thanks very much for your help!
SHThanks for letting me know the port, but what I didn't know how to do was actually connect to it. Out of the blue, I tried map network drive at work on a pc to my AEBS at home and wala it worked! I just wish they would post this somewhere! The manual for the AEBS would be a logical place, and yes I have it configured in bridge mode. Is there not a way to connect to AirDisk from Internet Explorer?
Some more things I discovered ON MY OWN since there seems to be ABSOLUTELY no guidance on this ANYWHERE, if somebody knows where, then please do tell:
1. port 548 (thanks duane) needs to be opened for Apple formatted AirDisks using Apple Filing Protocol on the mac (from Finder, Go, Connect to Server, afp://home network ip or dns name/disk name) or map network drive on the pc:
(2 back slashes, leaning back)home network ip or dns name\disk name
2. port 445 needs to be opened for Windows formatted AirDisks using Server Message Block on the mac (from Finder, Go, Connect to Server, smb://home network ip or dns name/disk name) or map network drive on the pc:
(2 back slashes, leaning back)home network ip or dns name\disk name (haven't tried this yet, but will shortly)
3. for guest access (usually read only), you may use guest and nothing for the password to connect to your AirDisk
4. for user access (usually to write), you may use anything for the username and the disk password you set for the AirDisk to connect
MAJOR PROBLEM!! >>
I was so psyched to have access to my AirDisk and tried several small files to test it out, no problem. However, when I try to upload .avi files of about 700MB size, I get an error stating that the device is no longer connected either at home or outside of home most of the time completely freezing the AEBS! Is there any size or file type of restrictions with AirDisk?? This is crazy, I get this far and I'm stuck by what appears to be a substandard device!?! I'm using PCs at both places, but it shouldn't matter since the AEBS fully support PCs! Could I possibly be doing something wrong?
<< MAJOR PROBLEM!!
There could be a problem with my AEBS as I wrote in another post, channel 1 of it's wifi appears to be completely inoperable.
SH -
I am working on setting up my mac mini server. Aside from in home file sharing I want ot be able to connect to some files remotely and even upload files, say pictures from my camera, to my server from outside my network. I am only looking to have maybe 2 users that have access. Should I get a domain name from a place like GoDaddy? in order to set up server to use domain in initial setup? I have 2 Drobos connected with my music, videos and pictures and I wat to access them from an Android, Windows and iPod device when away from home. Any how-tos out there or good step by step guides?
Thanks for any information.
-Peace
-DaveA normal address like www.domain.com is intended to work with static IP addresses, DynDNS is a service specifically intended for dynamic addresses and it will therefore automatically update the address e.g. name.dyndns.org to match the dynamic IP address each time it changes.
Some home broadband routers have built-in support to act as a DynDNS client but if yours does not then you can run the DynDNS software on your Mac server. This will then tell the DynDNS servers what your current dynamic IP address is so they can map it to your host name.
The result will be that your users can use a name like yourname.dyndns.org to access your server and not have to worry about the fact your IP address may change.
You would still need to run a VPN server to allow your remote users to connect to your network but OS X Server can do this. You could also run a website but depending on your needs that might be better done by using a web hosting service. -
Possible to connect to AirDisk out side of home?
Ok, this is the deal. I have two AirPort Extremes 802.11n. One connects to my Comcast cable modem. The other connects to my Samsung CLP-510 laser printer and my LaCie 500gb Mini USB HD. The network is setup as 802.11n only at 5hz, with WPA2 Personal encryption. Oh, I upgraded my MBP to 802.11n, and working flawlessly. Is it possible to connect to my AirDisk from outside my home, to access files? If it is possible who do I do it? Thanks in advance for any help.
G5 Dual 2.3ghz & MBP 17" 2GB 100gb 7200rpm Mac OS X (10.4.7)Anyone? Thanks.
-
Permit traffic from Inside to Outside, but not Inside to medium security interface
Can someone just clarify the following. Assume ASA with interfaces as :
inside (100) (private ip range 1)
guest (50) (private ip range 2)
outside (0) (internet)
Example requirement is host on inside has http access to host on outside, but it shouldn’t have http access to host on guest – or any future created interfaces (with security between 1-99).
What’s the best practice way to achieve this?Hi,
The "security-level" alone is ok when you have a very simple setup.
I would suggest creating ACLs for each interface and use them to control the traffic rather than using the "security-level" alone for that.
If you want to control traffic from "inside" to any other interfaces (and its networks) I would suggest the following
Create and "object-group" containing all of the other network
Create an ACL for the "inside" interface
First block all traffic to other networks using the "object-group" created
After this allow all rest of the traffic
In the case where you need to allow some traffic to the other networks, insert the rule at the top of the ACL before the rule that blocks all traffic to other networks
For example a situation where you have interfaces and networks
WAN
LAN-1 = 10.10.10.0/24
LAN-2 = 10.10.20.0/24
DMZ = 192.168.10.0/24
GUEST = 192.168.100.0/24
You could block all traffic from "LAN-1" to any network other than those behind the "WAN" interface with the following configuration.
object-group network BLOCKED-NETWORKS
network-object 10.10.20.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.100.0 255.255.255.0
access-list LAN-1-IN remark Block Traffic to Other Local Networks
access-list LAN-1-IN deny ip any object-group BLOCKED-NETWORKS
access-list LAN-1-IN remark Allow All Other Traffic
access-list LAN-1-IN permit ip 10.10.10.0 255.255.255.0 any
This should work if your only need is to control the traffic of the interface "LAN-1". If you want to control each interfaces connections to the others then you could do minor additions
Have all your local networks configured under the "object-group"This way you can use the same "object-group" for each interface ACL
object-group network BLOCKED-NETWORKS
network-object 10.10.10.0 255.255.255.0
network-object 10.10.20.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.100.0 255.255.255.0
access-list LAN-1-IN remark Block Traffic to Other Local Networks
access-list LAN-1-IN deny ip any object-group BLOCKED-NETWORKS
access-list LAN-1-IN remark Allow All Other Traffic
access-list LAN-1-IN permit ip 10.10.10.0 255.255.255.0 any
access-list LAN-2-IN remark Block Traffic to Other Local Networks
access-list LAN-2-IN deny ip any object-group BLOCKED-NETWORKS
access-list LAN-2-IN remark Allow All Other Traffic
access-list LAN-2-IN permit ip 10.10.20.0 255.255.255.0 any
access-list DMZ-IN remark Block Traffic to Other Local Networks
access-list DMZ-IN deny ip any object-group BLOCKED-NETWORKS
access-list DMZ-IN remark Allow All Other Traffic
access-list DMZ-IN permit ip 192.168.10.0 255.255.255.0 any
access-list GUEST-IN remark Block Traffic to Other Local Networks
access-list GUEST-IN deny ip any object-group BLOCKED-NETWORKS
access-list GUEST-IN remark Allow All Other Traffic
access-list GUEST-IN permit ip 192.168.100.0 255.255.255.0 any
Then you could basically use the same type ACLs in each interface. (Though still separate ACLs for each interface) And as I said if you need to open something between local networks then insert the correct "permit" tule at the top of the ACL.
Hope this helps
- Jouni -
Remote access VPN clients connected to Internet from VPN
Greetings,
I need to let remote VPN clients to connect to Internet from the same ASA VPN server
" client connects to ASA through VPN tunnel from outside interface then access Internet from the same ASA from outside interface again
thanksyou'll need to configure 'same-security-traffic permit intra-interface' on the ASA .
Also, need to setup the corresponding nat statements for your clients pool range.
i.e.
global (outside) 1 interface
nat (outside) 1 access-list anyconnectacl
where anyconnectacl is the pool for your clients:
access-list anyconnectacl permit ip 172.16.1.0 255.255.255.0 any -
Open Directory access from outside of network / internet
Hello all,
Got a question I'd love to get some help on, I have some users who are outside of my network and I'd like them to connect into the open directory on our leopard server so they can use the Shared iCal calendars, addresses, etc.
So my questions are A) Is it possible to connect in from outside the network and get access to the directory without having to have a seperate user account and use our VPN every time you want to connect? - if not is this the only way to do it (would you have to connect via the Mac VPN and then connect to the directory?)
B) is it possible to do this "seamlessly" so that you don't have to change any settings, login details each time you switch between your local user from outside the network and your directory access. (so basically if you are in iCal if you have internet access it will connect you to the directory, without you doing anything extra?)
Hope that makes sense, I can't seem to find the answers I need in the manuals, if I knew how this was meant to work I could probably have a fair go at figuring out how to actually do it (firewall changes etc)
Thanks in advance for the help
MartinSo my questions are A) Is it possible to connect in from outside the network and get access to the directory without having to have a seperate user account and use our VPN every time you want to connect? - if not is this the only way to do it (would you have to connect via the Mac VPN and then connect to the directory?)
If your OD server is visible from the internet -- i.e., it has a public address -- then you can do this without the VPN. However, it's not advisable to have a server exposed in that fashion.
You would be better off doing this through the VPN:
- Remote user connects to internet at hotel, for example.
- Remote user initiates VPN connection.
- Remote user now has access to iCal server and directory information.
Explain to the users that this information is private to the company, and private company resources are only available through the VPN. Allowing access without the VPN would be similar to the company posting its Employee roster and meeting calendars on the face of the building where any person (or competitor) could see them.
B) is it possible to do this "seamlessly" so that you don't have to change any settings, login details each time you switch between your local user from outside the network and your directory access. (so basically if you are in iCal if you have internet access it will connect you to the directory, without you doing anything extra?)
It's just one extra step: Connect to VPN. You're still the same local user on the computer.
If you're talking about laptop users needing directory access to authenticate when logging into their computers, well...That sounds like a whole other situation.
Hopefully this helps.
Bryan Vines -
No connection after waking from sleep using Express as base station
I find it difficult to re-establish my Internet connection after waking from sleep.
The Airport Express is connected to a wired Linksys router. I am using the Airport Express as my main base station. The Powerbook is joining my preferred network, but I am unable to get any in- or outbound Internet traffic.
I am, however, able to connect to my Linkys and login to to its admin area. When I run Ping and Traceroute diagnostics from the Linksys web interface, everything seems to be fine-- I am able to see outside servers. So the problem is this-- I am losing my Internet connection somewhere between the Linksys router and my Powerbook. Only after I fiddle I reset the Airport Express and fiddle with the Airport menu (Turn Airport On/Off) am I finally able to get out to the Internet.
I have the channel switching set to Automatic, but I've also tried running the Airport Express at different channels to no avail.
Has anyone experienced similar problems?Since you have an Airport Express connected to a separate router, start by disabling the router built into the Airport Express. To do this - run the Airport Admin Utility, select your Airport Express, click Configure, click the Network tab, and uncheck the setting to "Distribute IP addresses". Update settings to the Airport Express. Then - very important - restart all wireless computers.
-
After installed iOS7 I am facing the following two problems:
1. WIFI as well as mobile data connection are working fine at my home. But, not connecting with any other outside WIFI networks. Error message is 'unable to join network'. Mobile data also not connected outside my home. Sometimes wifi and mobile data connect outside my home when I turn off and on the phone.
2. Bluetooth, in my car, paires well and incoming and out going calls can be received and made. The problem is no sound out put from speakers.
Apple please make note of the above problems (of million people) and give solution before giving any other updations for painting and tinkering the screens.Check this thread, the same solution might work for you:
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/N8-111-040-1511-Wifi-and-mobiledata-... -
How to configure connection to AD from a hosted environment
Hi there,
I am in the process of planning a migration from our current SP 2010 environment to SP 2013 that is being hosted outside of our network.
I was hoping somebody could point me in the right direction of how I go about setting up a connection to our AD server inside our network to this SP environment that will be outside our network?
ThanksOr you could talk to them about setting up ADFS. This won't require a forest trust (which hosting providers normally don't do). ADFS is based on certificates, and allows SharePoint to use credentials from your organizations AD. It will require work on
their end as well as on your end. See this article for more information:
https://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx
Nico Martens - MCTS, MCITP
SharePoint 2010 Infrastructure Consultant / Trainer -
I would like to setup a new messaging service between my employees because we have issues with most online services. I'm thinking of getting a Mac Mini Server, so I can run Messages Server, but I have an employee outside my network. Can they login to the server remotely to use the Messages Server?
ThanksIf you're talking about setting up and using the Jabber messaging service provided by OS X server then yes, it's really easy to set up and use in and out of the office. The only trick it is, and also most other services, is a correct DNS setup so you're able to connect and use the server from the "outside".
I use this myself (via Lion server rather than Moutain Lion server) from behind a dynamic IP addressed ADSL line and have no problems whatsoever. -
how to allow some fixed extension go in from outside to inside but not allow go from inside to outside
for example, allow JPEG, MOV, AVI data flow from outside to inside
but not allow JPEG, MOV, AVI files access or upload or get by outside, in another words not from inside to outside
how to configure?Hi,
The ZBF link sent earlier show how we can inspect URI in http request
parameter-map type regex uri_regex_cm
pattern “.*cmd.exe”
class-map type inspect http uri_check_cm
match request uri regex uri_regex_cm
ZBf is the feature on Cisco routers and ASA though concepts are little same but works differently. However it is important that you can be more granular with the protocol (layer 7) inspection only. Like on ASA if you will try to restrict .exe file from a p2p application that won't be possible, But on router you have some application for p2p in NBAR and you can use it file filtering. Please check configuartion example for both devices.
Thanks -
How to allow ping from inside to outside in 2900 router?
Hi,
I have a Cisco router 2900 with firewall, i need to know how can i allow the ping from self zone to outside zone, i trried to create policy from self to outside but i still didn't allow ping or tracert, i get that message when i try to ping from cisco router:
"Unrecognized host or address, or protocol not running"
any help will be appreciated.
Thank youHi jcarvaja
here is the used configuration:
Building configuration...
Current configuration : 5584 bytes
! Last configuration change at 09:00:20 UTC Tue Apr 9 2013 by admin
version 15.1
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
no service password-encryption
service udp-small-servers
service tcp-small-servers
service sequence-numbers
hostname Router
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
no logging buffered
no logging console
enable secret 5
no aaa new-model
no ipv6 cef
ip source-route
ip gratuitous-arps
ip icmp rate-limit unreachable 1
ip cef
ip name-server 163.121.128.134
ip name-server 163.121.128.135
ip port-map user-custom-fleet port tcp 2000 list 1
multilink bundle-name authenticated
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-324261422
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-324261422
revocation-check none
crypto pki certificate chain TP-self-signed-324261422
certificate self-signed 01
30820229 30820192 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
30312E30 2C060355 04031325 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33323432 36313432 32301E17 0D313330 34303930 38343034
375A170D 32303031 30313030 30303030 5A303031 2E302C06 03550403 1325494F
532D5365 6C662D53 69676E65 642D4365 72746966 69636174 652D3332 34323631
34323230 819F300D 06092A86 4886F70D 01010105 0003818D 00308189 02818100
B8ABD60F 8C879B3B BC1C1643 48059AD2 F940A700 6D58161E 37D53E6E E028B806
61EAA942 CED2A3C6 3FB3A47E 20E05B10 0941A9D8 38FFA6F9 D2B9E52C 225A57BA
14F8842A A26E7E02 38E9F7C8 328504D0 5C3EEE41 CC75B237 BBD07CBA 1A850540
2A5AAFAD 4553FB03 0E366211 9AC09967 4DC03082 0AF546A3 F6AA2739 1D8A8AA9
02030100 01A35330 51300F06 03551D13 0101FF04 05300301 01FF301F 0603551D
23041830 16801428 FEEB3910 B7A1D374 1F86BCD5 96CEDF75 8DF11E30 1D060355
1D0E0416 041428FE EB3910B7 A1D3741F 86BCD596 CEDF758D F11E300D 06092A86
4886F70D 01010405 00038181 006BBF7A 430905F6 D5B27B0D 96315504 87816DAA
B5EA86D9 6E9A1D58 7B328C88 A6A358D0 00D035A9 8CDDEC41 15AF0108 F5CB1072
B0485D7D CFC0D0CB 71E9B153 FB7B8B40 40C157E4 B254D01C 890D615F D8395545
F0B47E0B 57341EB2 C0CE0039 DC18EAD6 078986F0 A5A5D04F D5041DB6 23CAA002
4901248C 95B61A0B 3ED5B26A EF
quit
license udi pid CISCO2901/K9 sn FCZ1526C3JL
object-group service Outside-Reply
icmp echo-reply
username admin privilege 15 secret 5
redundancy
ip finger
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
class-map type inspect match-any Deny_ALL
match access-group name dwdwd
class-map type inspect match-any Inside-Outside
match protocol http
match protocol https
match protocol dns
class-map type inspect match-any ICMP_RQST
match protocol icmp
policy-map type inspect Inside-Outside
class type inspect Inside-Outside
inspect
class class-default
drop
policy-map type inspect Self_to_Outside
class type inspect ICMP_RQST
inspect
class class-default
drop
policy-map type inspect Outside_to_Self
class type inspect Deny_ALL
pass log
class class-default
drop
zone security IN
zone security OUT
zone-pair security Self_to_Outside source self destination OUT
service-policy type inspect Self_to_Outside
zone-pair security Outside_to_Self source OUT destination self
service-policy type inspect Outside_to_Self
zone-pair security Inside-Outside source IN destination OUT
service-policy type inspect Inside-Outside
interface GigabitEthernet0/0
ip address 101.101.100.245 255.255.255.0
ip mask-reply
ip directed-broadcast
ip flow ingress
duplex auto
speed auto
interface GigabitEthernet0/1
description $FW_INSIDE$
ip address 49.31.152.80 255.255.255.248
ip mask-reply
ip directed-broadcast
ip flow ingress
zone-member security IN
duplex auto
speed auto
interface Serial0/0/0
no ip address
ip mask-reply
ip directed-broadcast
ip flow ingress
encapsulation frame-relay IETF
no fair-queue
frame-relay lmi-type q933a
interface Serial0/0/0.16 point-to-point
description $FW_OUTSIDE$
ip address 172.17.18.122 255.255.255.252
ip mask-reply
ip directed-broadcast
ip flow ingress
ip verify unicast reverse-path
zone-member security OUT
frame-relay interface-dlci 16
interface Serial0/0/1
no ip address
ip mask-reply
ip directed-broadcast
ip flow ingress
shutdown
clock rate 2000000
ip forward-protocol nd
ip http server
ip http access-class 2
ip http authentication local
ip http secure-server
ip route 0.0.0.0 0.0.0.0 Serial0/0/0.16
ip identd
ip access-list extended ICMP
remark CCP_ACL Category=128
permit ip any any
ip access-list extended deeef
remark CCP_ACL Category=128
permit ip any any
ip access-list extended dwdwd
remark CCP_ACL Category=1
permit object-group Outside-Reply any any
access-list 1 remark CCP_ACL Category=1
access-list 1 permit 196.219.234.77
access-list 2 remark Auto generated by SDM Management Access feature
access-list 2 remark CCP_ACL Category=1
access-list 2 permit 101.101.100.0 0.0.0.255
access-list 2 permit 10.20.10.0 0.0.1.255
no cdp run
control-plane
line con 0
login local
transport output telnet
line aux 0
login local
transport output telnet
line vty 0 4
login local
transport input all
line vty 5 15
login local
transport input all
scheduler allocate 20000 1000
end
Maybe you are looking for
-
Error in Forms while creating the trigger- WHEN-CREATE-RECORD
Hello, Right now I am using 11g client side and 10g database. I am constantly getting an error while creating triggers in 11g. I have created a sequence in SQL developer using the following code: create sequence loc_id_sequence start with 14; After c
-
Is it possible inter division transfer purchase order to convert Sale order
Hi PLease help me, In my company, I want to define a new process for inter division purchase order to convert a inter division sale order. This process we call IDT process. Regards, Ratnesh
-
I used to have 'sky at night' app but it got deleted in error, now when I try to download the app I get 'this app is incompatible with this phone' ' this app requires a gyroscope'...why ? whats changed ? how do I resolve the issue ? thanks CB
-
Publisher Dynamic Receipent Error in Germany
Hi, I have to burts a crystal report for every cost center and trying to use publisher for this. I created a main crystal report with CostCenter as prompt/variable. I create another crystal report, which contains list of cost center only, to use as a
-
Small black bars on the top and bottom on video after exporting?
I'm using 1280x720 video footage in Adobe Premiere. The problem is, whenever I export my finished project as 1280x720, the newly rendered file has small black bars on the top and bottom. These black bars are not there in the Premiere preview, only af