Connecting via system name rather then IP

Currently our system connects to SAP by passing through the IP address, client number and their individual logon details.  I'm sure there was a way to connect by using the system name rather then the IP with the SAP COM objects but so far i've been unable to achieve this with the .NET connector.  When I supply a value for the SAPSystemName in my Destination object I get "Open file 'C:\WINDOWS\sapmsg.ini' failed" as an error message.  I do not have a sapmsg.ini file in C:\WINDOWS\ and this is obviously why the error is occurring.  What i would like to know is if there is anyway of doing this without having the sapmsg.ini file? 
My fall back plan would be to interrogate the SAPLogon.ini file myself and determine the IP for the given system name however this isn't an ideal solution though so I would prefer to find a better way of retrieving this information.
Any suggestions or comments would be greatly appreciated.
Thanks,
Charles

Whooops....figured it out myself.  For those that are interested:
SAPLogonDestination destLogon = new SAPLogonDestination();
destLogon.DestinationName = destLogon.GetDestinationNameFromPrintName( SystemID_ );

Similar Messages

  • Email photos from iPhoto via Outlook 2011 rather then mail?

    Is it possible for iPhoto to automatically open and insert photos using Outlook rather then mail?

    iPhoto 11 no longer uses an application for sending emails. It creates the emails and sends them itself when you supply your account details.
    So, no, you can't set Outlook (or anything else) as a default Email client in 11.
    FYI: iPhoto 11 works with email in a new way. Rather than using an Application to send the email as before, what they have done is handle the email within iPhoto. So, you input your Email Account details - the name of your service, the account name, password, etc, and iPhoto uses that information to send the email via your account.
    There's an element of swings and roundabouts in this.
    Users of Apps like Thunderbird or Postbox could not email from within iPhoto in the past as those apps are not scriptable. Neither could it be used by people who use Web Mail and access their mail via a web browser. By going this way these people users have the same service as Mail/Entourage/Eudora users have.
    So much for the swings: on the roundabouts, however, users of Mail (and I suspect Entourage and Eudora) have a change. Share -> Email does not work as before and you can no longer select pics within iPhoto, resize them and pass them over to their preferred application. Neither can you send photos without a Template.
    However, by creating a Service sing Automator, it's perfectly possible to recreate the previous usage, though accessed a little differently. Here's one way:
    1. Launch Automator
    2. From the Dropdown sheet select to make a Service
    3. On the Right hand side, over the large pane (under the record button) select 'Service Receives +no input+'
    Uploaded with Skitch!
    3. From the Library Column (extreme left) click on Photos.
    4. From the Middle Column drag 'Get Selected iPhoto Items to the large pane.
    5. In the drop down on 'Get Selected Photo Items, select 'Photos'
    Uploaded with Skitch!
    6. Back to the Library column, extreme left and this time click on Mail
    7. Drag 'New Mail Message' to the right hand pane, under the existing 'Get iPhoto Items'
    8. Drag 'Add Attachments to Front Message' under that.
    9. Save it, Name it.
    Now, in iPhoto select the photos you want to email
    then
    iPhoto Menu -> Services -> And select the Service you created.
    The Mail app comes forward with your Message, with files attached.
    You can resize the Photos using the option at lower right of the Mail window:
    Uploaded with plasq's Skitch!
    Using the Keyboard Shortcuts in System Preferences you can choose a key command to do the whole thing from the keyboard.
    I have looked at the Automator commands provided for Outlook and it seems like you could do a similar job for it - though I don't know if it will have the ability to resize the images.
    Regards
    TD

  • Firefox 4 recently downloaded will not create a dial up window. The only way I can get it to work is by establishing a connection via oulook. Firfox then works fine. How do I get Firefox 4 to reqest a dial up window

    Since we downloaded Firefox 4 we have only been able to connect to the internet by using the dial up of outlook. Once connected in this way Firefox 4 works fine.
    We have zone alarm firewall and NOD32 antivirus.

    I have now managed to get AX working on my BT home hub. I took my second non-working unit back to Apple in Solihull and got them to test it in store. They agreed it wasn't working. They then tested another unit in store and that did work so I brought that home. It would be worth you doing the same as I got a 10% discount off my next purchase of anything at Apple for my troubles.
    I set my homehub security to None (from WEP - in homehub manager/advanced/wireless/security), plugged in my AX to homehub using an ethernet cable, then ran Airport utility and after a couple of runs it finally picked it up. I was able to set the configurations I wanted and 24 hours later it is still working. I set my homehub security settings back to WEP as soon as the AX was configured.
    I also installed airport utility on my son's windows laptop and that is now able to print wirelessly as well. So, finally a result.
    I would suggest you take your unit back to where you bought it from and get them to test it. If they offer you another one ask for a Mac genius
    to test it in store for you first. Also ask them to run through the installation procedure with you. Don't forget to ask for something for your troubles:)
    Hope that helps,

  • Problem with logical system name

    Hi All
    We are facing problem when connecting Ecc 6.0 and BW
    When i execute the RSA 1 transaction, i am getting the following error:
    <b>Logical system name has been changed for this system</b>
    I raised this issue to SAP.
    I got the following reply:
    <b>Please see if the RSADMIN table has the correct logical system in BW.
    If the logical system name here is incorrect, use report
    sap_rsadmin_maintain to change the logical system name.</b>
    We reffered the Table RSADMIN, but couldnt identify which field has got logical system name.
    Then we executed sap_rsadmin_maintain program in se38, but dont know what to enter in value and object field.
    Can anyone help in this regard
    Thanks in advance
    Regards
    Rak

    Hi Lars,
    I would start RSA1 in debugging mode. Try to establish which check is giving you this message by e.g. trying to set breakpoint at message.
    Like this you can at least check which entry must be converted in order to be able to proceed.
    Best regards,
    Olav

  • Logical System name in Entitlement Systems

    Hi,
    In Authentication > SAP, I have given System and client names, but logical system name is not generated.
    Please let me know how to resolve this.
    Thanks in advance,
    Priya

    Hi John,
    Thanks for your response.
    FQDN and IP address are added in the host file.
    But still the logical system name is not displaying.
    Without logical system name, other details are filled for Application Host Logon as
    Application server name - Host name
    All the details are filled except the selection of logical system name.
    Then it is displaying the error - "Please specify complete credentials for either load balancing or direct application host logon"
    Please let me know how to resolve this.
    Thanks,
    Priya.

  • Change Receiving System Name in BD64

    Hi folks,
                   We have our production instance and QA instance; we have copied all data from Production to QA ENV (Client Copy). After that when I login in to QA system I saw in BD64 all the system pointing to receiving production system. I  ran  BDLS ( transaction ) which convert production logical system name to QA logical system name in tables and as well as in SCC4 transaction.
    I again went to BD64 and I noticed after running BDLS my production system name replace to QA system name. But Receiving systems names are still pointing to production systems. I know that BDLS just change the sending system logical name not receiving.
    My question is that how I can change or modify the receiving system production names to testing name. Is there any way or program?
    I try to change the receiving system name but it’s not letting me change. You guys have any idea how to change the receiving system production name to test name.
    I don’t want to create all distribution model names with test systems as I have 30 distribution models and client copy is keep on going after every 1 or 2 months.
    Please help me in this regards.
    Thanks

    The OSS notes just tell about the BDLS. I already done with BDLS… Scenarios is like that say we have one distribution model name in Production
    Model name = ZXYZ
    (Sender system) Production system name = PRD_123
    (Receiving production System in UK)      = PRD_UK
    These above are the setting for Production client.
    We copy data from Production to Quality, so its copy all the data and Distribution name in QA ENV…
    So now my QA looks like
    Model name = ZXYZ
    Sender system) Production system name = PRD_123
    Receiving production System in UK)      = PRD_UK
    After that I ran T-code BDLS and give logical system name = QA_123, then when I go back to BD64 the model is looks like following
    Model name = ZXYZ
    Sender system) Production system name = QA_123
    Receiving production System in UK)      = <b>PRD_UK </b>
    But PRD_UK isn’t change because it’s the production system for receiving one , so Now I need to modify <b>PRD_UK to QA_UK in BD64</b> , How I’ll do it ?
    I am trying to change receiving system but it doesn’t allowing me.
    I hope, now I made my self more clear.
    Thanks in Advanced.
    Bye
    Message was edited by: Suleman Javed

  • Nokia E5 Ovi Mail keeps trying to connect via pack...

    My Nokia E5 Ovi Mail keeps trying to connect via packet data rather than wifi.. I have tried to go into the Mailbox setting and into Advanced malib.setting and changed it to user-defined with one wifi but when I quit the mailbox and go back again, I find that it aotomaticly recovered the setting. Can any body help me to fix it? I also tried to set it to the point I defined by Smartconnect but it doesn't help ether... Thanks!

    @mana_g
    Welcome to the forum!
    Is your E5 network branded variant or generic SIM free version?
    Happy to have helped forum with a Support Ratio = 42.5

  • I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that

    I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network Preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that the WiFI signal is reaching the iMac since both my iPhone and iPad are working perfectly at that location. I have rebooted the router and the iMac to no avail. Any suggestions would be greatly appreciated. Thank you very much. Geoff

    Hi Geoff,
    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • There was a problem connecting to the server "Time Capsule".  The share does not exist on the server. Please check the share name, and then try again.

    The following error pop's up as an [OK] dialogue box after logging in the iMac,
    There was a problem connecting to the server "Time Capsule".
    The share does not exist on the server. Please check the share name, and then try again."
    As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
    I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
    Any suggestions on how begin to work out how to achieve networking seamlesness?

    First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
    From the menu bar, select
     ▹ System Preferences ▹ Network
    Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
    Try again to back up.
    If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

  • No laughing...  I have a Canon ZR 300 camcorder.  I can not see it when connected via firewire in system profile and iMovie doesn't see it either.  Any suggestions?

    I have an old Canon ZR 300 camcorder that I'm trying to connect to my 17" MBP via 9 pin firewire (its a 4 pin to 9 pin cable as the MBP doesn't have a 4 pin firewire - figured it was backwards compatible).  Anyhow, iMovie 09 doesn't see the camcorder.  I checked under System Profile and then under Firewire and it doesn't see it either.  In fact I get some red letters about not seeing firewire devices.  I'm running Lion.  Any help would be greatly appreciated!!
    Greg

    Should using mixed wifi and ethernet clients on a timecapsule work?  if so is it a feature I can use out of the box so to speak?
    Thanks
    No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
    Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.)

  • How to get the local lan connecting all the system names ?

    how to get the local lan connecting all the system names using java?
    any body know then send the coding or solution

    This question is asked and answered repeatedly. Search the forum.

  • Why to Use EJB rather then Direct Connection To Oracle Thru webDynpro?

    Hi
      Experts,
       I want to know that why to use EJB to connect to oracle rather then direct connection via WebDynpro.
       Please Give Me References to how to connect to oracle with EJB or WebDynpro.I want to tell you that i know JDBC,JAVA and basic web Dynpro.
      Please Reply Me Dear Friends...ASAP.

    EJB are better for a project beacuse the application is scalable, have less maintainence and have better performance.
    Have you gone throght these:
    Connect Oracle 9.2 DB to Web AS 6.40
    web dynpro - database connection
    web Dynpro application connecting to oracle
    /people/ramesh.jandhyala/blog/2007/01/02/webdynpro-and-oracle-using-dtos
    Regards,
    Ashwani Kr Sharma

  • My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    Shootist007 wrote:
    If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
    Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad.  Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS.  Just maybe right genius?  Don't rush to criticize someone's recommendations until you realize other possibilities.  (I did say "if it does")
    Thank you

  • Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

    Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
    Or any other suggestions please? Thanks

    As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

  • Logon issues when connecting to the R/3 system via System Template

    Hi All,
    I have created a System object for connecting to the R/3 system.
    the R/3 system is on ITS server.
    i have set the connector properties, ITS server details, User Management properties.
    Connector Porperties: Application Host: -
    , logical system name -
    , SAP client---,SID---, System number -
    server port-----,System type : sap_R3
    ITS server details : ITS host name, ITS path :/scripts/wgate, Protocal :http
    Usermanagement properties :    Logon method : SAPLogontickets, user mappingtype : Admin/user.
    Alias :Given the alias for the system created.
    i have also checked with the connection tests. The ITS Connection is green. but the connection test for the connector is red.
    Also the Portal user is not the same as the SAP backend user. So for this i have also made the user mapping, Under System Administration ---> Usermapping . ( we are using EP6.0)
    When i finally created a SAP trasaction iview based on the Alias. and tried to preview it. it is  showing me the error   "
    Name or password is incorrect, please reenter" .
    but in the preivew if i give the user id and password which i have mapped under the user mappings  it is entering the SAP trasaction.
    kindly suggest what can be the issue?
    Thanks & Regards,
    Kavitha

    Hi All,
    Thanks for all your replies. And sorry from my side for the late reply.
    I have followed all the suggestions made by every one of you.
    Also Arun, i have checked with the blogs that you have sent. All the settings done by me are exactly the same as defined in the blogs.
    but still the same error persists.  also When i tried to Login with the same user id as that of portal . It is working fine.
    Also while going through the blogs i have found that.. While doing the Connection tests. One of the test,  Connection test for the connectors is failed. i am unable to know the reason for failure.
    is this because of this reason, is the iview is asking for the re entering of user id and password ?
    kindly help.
    Also in most of the blogs i have found that for searching the  Message server. When we are not sure of name of the message server the  go to Transaction SMICM..... Where should this Tcode be entered. is it in the r/3?
    Thanks & regards,
    M.Kavitha harika.

Maybe you are looking for