'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

Similar Messages

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Did you reboot the TC? That is always the first step.
Reboot the whole network if that is not enough.
If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
We need a bit more info on the whole network layout and what OS you are running. What model TC you have??

Server may not exist or it is unavailable at this time when automounting

I have an AFP share on a Netgear ReadyNAS set to auto mount in login items. After upgrade to 10.6.5, it no longer works... Every time I log in, I get the msg:
Server Iridium.local may not exist or it is unavailable at this time. Check the server name or IP address, check your network conditions, and try again.
(Iridium is server name.) I have had this happen on two separate networks with two different Macs and two differnet NAS boxes. Both have same configuration.
Neither dragging the share into login itemsnor using an AppleScript mount script in login items works.
Changing to CIFS or SMB and not using .local extension seems to work, but takes longer.
I've seen at least one other post (in a thread on something else), so I know I'm not alone. Any ideas?

I'm having exactly the same problem. I've grep searched all the .plist files in my preferences and deleted references to this volume, but that didn't help. Clearly FCPX is trying to preload external media for the media browser or something that is referencing this old volume, but I cannot tell what it is. Sadly, FCPX is leaving no more detailed messages about what's going wrong in the Console, either.
For lack of a better "solution" I'm just moving that box down to the lower left corner, almost completely dragging it off the screen without clicking OK. You can still use FCPX without a problem. Just leave enough of the box on the screen so that you can drag it back up and click OK if you need/want to.

Every time I try to connect to my 2TB Airport Time Capsule I get the following msg - "The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and

Every time I try to connect to my 2TB Airport Time Capsule I get the following message "The server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection, and then try again." However, if I unplug it and then plug it in again, I can connect to it. How can this be corrected without having to unplug it all the time?

Are you using Yosemite??
This is stock standard yosemite bug and we have no simple fix for you..
You can fix it at its source..
Hack in DNS from Mavericks.. so Yosemite can be raised to a level of reliability above GHASTLY.. !!
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
Apple still have not fixed it.. and users are now sick and tired of the problem.. so have resorted to what can only be described as extreme measures.. in fact I wonder why people don't just revert to Mavericks.. or earlier.. whatever OS was reliable.. instead of seeing the latest greatest update as necessity.

The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.

The above message keeps appearing. How do I get if out of the way permanently.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

Two days ago I started receiving this message, "The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again." I have no idea what to do or what I did to get this mess

ssage. I use Time Capsule to store my iTunes library and to back up with Time Machine. Since I started receiving this message, Time Machine is no longer backing up and I can't access my iTunes library. Any ideas what happened? I also use Time Capsule for all of my wireless devices. Apple TV is working fine, my iPads are accessing the Internet fine. I just can't seem to access the information contained on the drive.

Here is another part of the error message I continue to receive
"There was a problem connecting to tge server "David-Kimmels-Time-Capsule.local".
If anyone could help I would surely appreciate. Going crazy not able to access iTunes.

The server may not exist or it is unavailable at this time

When I am away from my home office (and home network), I get this error message repeatedly. Any resolution ideas?

I'm having exactly the same problem. I've grep searched all the .plist files in my preferences and deleted references to this volume, but that didn't help. Clearly FCPX is trying to preload external media for the media browser or something that is referencing this old volume, but I cannot tell what it is. Sadly, FCPX is leaving no more detailed messages about what's going wrong in the Console, either.
For lack of a better "solution" I'm just moving that box down to the lower left corner, almost completely dragging it off the screen without clicking OK. You can still use FCPX without a problem. Just leave enough of the box on the screen so that you can drag it back up and click OK if you need/want to.

Connection Failed: The server "name" may not exist or it is unavailable...

So I think I know what caused this problem, but I can't figure out how to make it stop...
When I go to print, if I try to click on the pop-up to change the default printer setting, there's a LONG delay, then I get a dialog that says:
Connection Failed
The server "name" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, then try again.
Then there's another delay and I get the message a second time. I can then select any of my printer settings and print fine, it's just an annoying delay if I click on that pop-up accidentally or need to change it.
I have a new iMac and I migrated from my old G5. The "name" of the server it is seeking is my old G5, so that must be in the settings somewhere, but I can't find it. I tried going into the Print & Fax settings in System Preferences, deleting the printer there, and then re-adding, but that didn't clear it up.
Thanks for any insight you can provide!
--John

Hmm, well, this stopped working again for me. I tried swapping ethernet and re-installing the Airport client update - to no avail. I could always see my Mac shares from PCs though. However, I have (for now) managed to connect to the PC using ip address rather than name even though finder quite clearly sees the name. Does your printer connection work by ip rather than name ? I'm going to play name lookup detective for a bit now - it's some kind of Netbios name lookup issue I guess as I've no local DNS service. resolv.conf is apparently not used so a bit of learning to do! ...
... nmblookup seems to work but nslookup doesn't. Looks like SL connect via Finder isn't using nmblookup properly and I can't see how to make that work. When this gets reported enough it should get a publicised work-round or a fix. If only I can get dig/nslookup to slave out to nmblookup ...must be something I can configure for that ??

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

Ora-12545 connect failed because target host does not exist(plsql develper)

Hi,
I am using Oracle 10g version, and i am using plsql developer.
I am able to connect Oracle through sql*plus, But i am not able to connect Oracle through plsql developer from past few days, it is giving me error like:
ora-12545 connect failed because target host does not exist
I have not done any changes in setting though i am getting this problem, earlier i was able to work with plsql developer very good.
I am sending the TNS file for your reference.
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = vnod-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Please help me in this.
Thanks,
Vinod

910575 wrote:
Hi,
I am using Oracle 10g version, and i am using plsql developer.There are numerous products with similar names.
Which vendor provides your software & which version of the software do you have?
Is the Oracle database server system installed on the same system as your client software?
post results from following SQL
SELECT * FROM V$VERSION;
Handle:     910575
Email:     [email protected]
Status Level:     Newbie
Registered:     Jan 26, 2012
Total Posts:     42
Total Questions:     20 (18 unresolved)
Why so many unanswered questions?
Edited by: sb92075 on May 18, 2012 9:30 PM

Since upgrading to Yosemite I am getting frequently "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again"

Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
I am also noticing page load very slowly when this problem is not occurring.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

HT1338 Software Update can't connect to the update server. Make sure you're connected to the Internet, and then try again

I have been getting this message on MAC OS 10.6.3 "Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again". Internet is working fine for everything else. Updating to 10.6.8 and applying all the security updates and patches [directly downloading from the apple website] has not resolved the issue. Read somewhere about a software update enabler for 10.6, installed it, but not helping.. [not sure of the update server settings to be entered] .Is there no way to make the software update work from the Apple Start Menu??

Problem solved.. Expired rules in Little Snitch caused the glitch

Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.

This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine.

Admin gets the following message while trying to update software: None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. Any suggestions?

I'm the Adnin. just recently I tried to update system software (Lion OS). The following message was returned. None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. but I have internet access )email, Safari, etc.). Any idea of what is happenening?

The error may be at Apple's end rather than yours. It could also be due to corrupted files on your computer. Try deleting the following:
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Caches/com.apple.SoftwareUpdate/
/Library/Preferences/com.apple.SoftwareUpdate.plist
Restart your computer.

22591 The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object. Ensure that the computer name is unique in the VMM environment, and then try again.

Hello everyone,
I recently bummed into an error message when I want to deploy a service template.
Setup:
1 HyperV server on win2k12 r2
1 SCCM VMM 2k12r2 on the hyperv server
1 template with all the objects in the library
Error:
When I deploy the the service template I get the below error message.
22591
The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object.
Ensure that the computer name is unique in the VMM environment, and then try again.
The issue is that I can't find it anywhere, not on my domain controller not on my dns server as a record and also not as a vm in sccm or in powershell when doing get-vm. So where do I need to remove it ( no it is not an option to create a new Hostname for
this service template ).
Andre

There could be a couple things happening.
One - you have a Service Template, it defines %Computername% as a variable. And you have deployed this Template once using 'foo' and you are deploying it again as 'foo' without deleting the previous instance.
Two - you hardcoded the computer name into the template.
Three - you are scaling out and you have hit the bug that the wizard does not increment the machinename if you have something like computername## where SCVMM should be incrementing the machine name.
Windows does not support identically named machines (you can't have two machines on the same network with the same computer name - they broadcast their name and the 'second' one shuts down its network stack). In support of this SCVMM also enforces
this rule.
And with any templates SCVMM is in charge of machine names at deployment.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

Similar Messages

Maybe you are looking for