Connection Issues in the 01440 Area?

Hi All,
I've just checked the BT Server Status for the 01440 area and there are no reported issues, but this morning (Tuesday 11th January) and also on the evening of (Sunday 9th January) I have not been able to connect to the internet. The connection status just has a yellow warning icon.
Looking in the eventvwr it has errors about DNS client events saying they can not be connected to. I use the default BT DNS servers on my Netgear DG834GT router, tried the same on my older DG834 router and get the same issue. Internet was working last night, I've made no changes and now this morning I can't connect.
Anyone else experiencing similar problems?
Kind Regards, Rebbers.

bump

Similar Messages

  • I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

    I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

    Hi Peter!
    I'm sorry to read that you are having issues with your Sync account.
    Your best bet is to follow the steps described in this blogposts and open a bug:
    https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
    After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
    * At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
    * Once the options window opens, click on the Sync tab.
    * At the bottom of the Sync tab click on '''Deactivate this Device''' link

  • Anyone else having repeated wifi connectivity issues with the OSX version 10.8.5?

    I just updated the software on my iMac to OS X version 10.8.5. Now I am having repeated connectivity issues with the wifi in my house. This is the only device that is having these issues. My phone, ipad and tv are not having any problems at all.
    It happened immediately following the update. I was sending emails and browsing before the update without a problem.
    from apple:

    I had a message like that last week - only it asked what browser I would be using - I just quit safari - purges caches etc - and at that time noticed I was getting RSS feeds through PUBSUB - tracking them down to the top sites view I never use - I deleted all of the top sites (most of which I don't go into so it must have been a preset) that included MSN and Google - I don't use google so that was pointless.  (deleting a top site means you are blocking it from that page)    Have not had the message since so it must have had something to do with top sites activity.
    Just a note:  Did see somewhere probably BBC tech - that Google was going to stop supporting older web browsers.

  • While downloading app update on ipad lost internet connection and now the updates are not updating. How do I fix this?

    While downloading a common application update, I lost my internet connection and now the updates are not updating. How do I fix this?

    Try this:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • Then restart & see if you can update.
     Cheers, Tom

  • Constant WiFi connection issues where other devices are fine. "Sending request..."

    I experience the same issues as some other posters here with the MacBook Pro, Lion, and certain networks.  All other devices (Android phone, Windows laptop, iPad...) deal with the situation just fine on the same networks.  The MacBook however gets its knickers in a twist:
    I get perpetual "Sending request..." messages at the status bar of Google Chrome.  All applications fail to find internet, despite full bars.  This was only an issue since upgrading to Lion.  A reboot of the Mac will always solve it, meaning it is not the router.  Rebooting the router often does not solve it. Turning WiFi off then on sometimes solves it.  Quitting Chrome/Safari sometimes solves it.  But rebooting the Mac always solves it.  This indicates it is an issue Apple really need to address.
    Are there any ideas here?  I have made sure there are no DNS entries.  I have deleted my home network several times and re-added it.  I have hard reset the router, and been through three (that's not a misprint) routers.
    I doubt it is a hardware issue with the Mac as it only started with Lion, on the same Mac.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Connection Issues in the Connection Manager

    Good Morning Friends,
    I hope i will get some answer or some directions here . I have been trying to find a solution for months. I have two servers TESTSQL(2008R2) PRODSQL(2008R2) . On these twos servers i have a package that loads data from source databases into the staging tables
    in the data warehouse. The source servers were 2005. The packages were running great with no problem. They have upgraded the source servers to 2008r2 and now the package on the PRODSQL(2008R2) is not working. I'm getting the connection manager connection error.
    we have checked all the possible places (like nameof the instance, firewall -- all the servers are internal servers). The package on TESTSQL is able to connect to the source servers and this is how we have been running the package for the time being. Please
    see the below error. Any documentatiuon or link will be of great help.
    TITLE: Connection Manager
    Test connection failed because of an error in initializing provider. Login timeout expired
    A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
    see SQL Server Books Online.
    Named Pipes Provider: Could not open a connection to SQL Server [53].
    BUTTONS:
    OK

    Hi thinkingeye,
    Based on my research, this 503 error usually means that the SQL Server computer can't be found or that the TCP port number is either not known, or is not the correct port number, or is blocked by a firewall.
    According to your description, it seems that the issue is caused by you cannot ping the IP Address of the source server in the command prompt window of PRODSQL server or the source SQL Server is blocked by the firewall in the PRODSQL server.
    For more details about how to fix this issue, please refer to the following blog:
    http://social.technet.microsoft.com/wiki/contents/articles/2102.how-to-troubleshoot-connecting-to-the-sql-server-database-engine.aspx
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Connectivity issue about the screen mirroring

    My Z2 phone can not connect to sink device with the screen mirroing.
    I try to analayze this issue by the wireshark application.
    My analysis result is as below.
    The operating channel of GO Negociation Confirmation is set to 36ch or 44ch when Z2 phone is P2P GO.
    In case of 36ch,  P2P sequence proceeds normally.
    In case of 44ch,  P2P sequence does not proceed, because Beacom frame is not transmitted from Z2 phone.
    Does Z2 phone have the usage restriction of 5GHz band with P2P GO ?
    [Device Information]
    Model number : D6503
    Processor info : Qualcomm MSM8974PRO-AB
    Android version : 4.4.4
    Baseband version : 8974-AAAAANPZQ-00027-23
    Kernel version : 3.4.0-perf-gd4d661a BuildUser@BuildHost #1 Fri Sep 19 18:10:07 2014
    Build number : 23.0.1.A.3.12

    Thanks for testing and glad to hear that it's working now with your Z3.
    We have looked into this more and also see that you have selected Japan as country in your accont. If you are located in Japan the cause of this issue was due to regulatory issues and channel selection. There's been an update for this in the update to Android 5.0 so that wrong channel is not selected which is why you're not seeing the issue after the update.
    We have also started rolling our the update for Z2 but i'm afraid i can't see when the update will reach Japan. We are currently rolling out the update for the nordics and baltics.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • 1st gen iPod touch wifi connection issue, grayed out wifi area in settings

    I have a first generation iPod touch and I'm having difficulty connectiong to wifi.  It tells me there is "no wifi" and the wifi area in settings is grayed out.  I have never encountered this problem in the seven months I've owned this device.  My wifi is currently being used by the other three devices that normally share it with my iPod, and they're running just fine as usual.  I've already tried restoring my iPod, as well as updating my iTunes to the newest possible software, then restarting the computer.  I've looked through all of Apple's troubleshooting guides, to no avail.  Any tips from people who've had the same issue or actually understand technology?  All help is greatly appreciated!

    I have a first generation iPod touch and I'm having difficulty connectiong to wifi.  It tells me there is "no wifi" and the wifi area in settings is grayed out.  I have never encountered this problem in the seven months I've owned this device.  My wifi is currently being used by the other three devices that normally share it with my iPod, and they're running just fine as usual.  I've already tried restoring my iPod, as well as updating my iTunes to the newest possible software, then restarting the computer.  I've looked through all of Apple's troubleshooting guides, to no avail.  Any tips from people who've had the same issue or actually understand technology?  All help is greatly appreciated!

  • JCA Binding Component connection issue in the Oracle Order Demo Application

    Hi,
    I setup the Oracle Fusion Middleware. I also deployed the Oracle Fusion Order Demo Application in the soa_server. I placed the order in the store front web.I initiated the webservice (OrderBookingService) and found the below error in the soa_server_diagnostic log file.
    =====================================================================================================================================
    Caused by: BINDING.JCA-12563
    Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Write' failed due to: JCA Binding Component connection issue.
    JCA Binding Component is unable to create an outbound JCA (CCI) connection.
    OrderBookingComposite:USPSShipment [ Write_ptt::Write(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510
    JCA Resource Adapter location error.
    Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/>
    The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/file/FODFileAdapter'.
    The reason for this is most likely that either
    1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or
    2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/file/FODFileAdapter. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR).
    Please correct this and then restart the Application Server
    The invoked JCA adapter raised a resource exception.
    =====================================================================================================================================

    Thanks Guys.
    I resolved the issue.
    The issue is that FileAdapter for FulFillment mediator is missing.
    Solution 1:
    File adapter connection factory needs to be created via the weblogic console
    The details below:     
         JNDI Name: eis/file/FODFileAdapter
         controlDir          java.lang.String     /tmp/control
         inboundDataSource     java.lang.String     jdbc/SOADataSource
         outboundDataSource     java.lang.String     jdbc/SOADataSource
         outboundDataSourceLocal     java.lang.String     jdbc/SOALocalTxDataSource
         outboundLockTypeForWritejava.lang.String     oracle
    Solution 2:
    seedFodFileAdapterResources target in $FOD_HOME/bin/common-sca-tools.xml needs to be executed to create the file adaptor.
    Thanks.
    Ilayaraja

  • My ipad suddenly not connecting to wifi internet but you can see the internet icon at the upper left side which means its connected.some of the apps are slowly connecting most of it are not,your suggestion/help are much appreciated,thank you.

    My ipad suddenly cannot connect to wifi internet,you can see the icon that its connected but most of the apps are not opening with message not connected to internet...
    Please your suggestions / help are very much appreciated
    Thanks

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

  • 4G issues in the Seattle Area?

    I have a newer Thunderbolt and have not been able to get a 4G signal for the last 2 days. I have done numerous battery pulls and can only get 3G. at times it drops to 1X also.I work in Seattle and usually have an extremely fst connection at home in Kent.

    I just got 4G back, and it's 10:50 pm. I was without 4g all day, so anyone else in the Chicago area who had the same problem, hopefully it's back on for you too...

  • Network connectivity issues with the iphone 5

    has anyone had issues with the iphone 5 in terms of network connectivity

    yep loads of postings if its re the wifi issue

  • Having a connection issue with the WRT54GS Wireless Router

    We just recently got Broadband internet. We had issues with it at first, because the Ethernet cable included wasn't working properly, and instead, the guy got us connected via USB cable. Now, I just bought this Router yesterday, and made the mistake of unplugging the USB and plugging in the extra cable. I did everything as instructed in the Easylink Advisor program. My connection was messed up, and I could not connect at all. After calling Tech support, they reset our modem and everything (cable modem and internet-wise) is as good as new. I went out and bought a new Ethernet cable, so now I have 2 perfectly new cables, and left the USB cable plugged in, so I don't throw it off as I did yesterday. I still can't get the Port 1 light to come on. the WLAN light is on, as well as the Internet light, but no Port lights will turn on. Anyone have any ideas? Thanks in advance! -Chris-

    Are you getting online via ethernet with the modem now? Make sure your local area network is enabled. Go to control panel then network connections.
    Message Edited by Pio04 on 07-11-2007 11:47 AM

  • BT home hub 4 wireless connection issue on the Xbo...

    Hi all,
    It has been flagged to us that there may be an issue when connecting an Xbox 360 to the new BT home hub 4.
    As many of you are aware the new BT home hub 4 has dual wireless bands broadcasting in the  2.4 GHz and 5 GHz range.
    It seems that when connecting an Xbox 360 wirelessly to the hub 4, the Xbox will state that there is an error, like the one below.
    “There is more than one network in range that has this SSID, please change your router SSID before proceeding”
    This issue seems to be due to the fact then when the Xbox scans for the available wireless networks, it sees both SSID's  and insists that one of them must be changed in case of a conflict.
    This is an Xbox 360 issue and not a hub 4 problem
    When Xbox 360 was released some 8 years ago dual band routers were very uncommon; so the Xbox has not been setup to deal with this type of connection.
    To correct this issue we have some steps that you can follow so that you can connect to the hub. You will need to log into the BT home hub manager  and change the SSID on the 5 GHZ band being broadcasted from the hub.
    Steps to do this are as follows…….
    Log in to the Hub 4 in the normal manner setting up a new password or using the custom password that has been setup by the customer then navigate to the Advanced Settings
    Then select continue to advanced setting
    Then select wireless
    Then select 5GHZ
    After that you will need to change Sync with 2.4 from yes to NO
    After this has been done you will then be able to change the SSID of the 5GZ band adding a number or a letter to the end
    After all this has been done you will then need to click apply to save the changes
    You will now be able to connect the Xbox in the normal way using the default wireless key 
    BTCare Community Mod
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

    Try changing the wireless channel in the hub. Enter 192.168.1.254 then go to wireless switch to manual and try another channel. You can try downloading inssider3 which will show netwrorks and their channels round about you
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Camcorder connection issues (not the simple type)

    Note: Also posted in OS and Hardware forums
    I have a Panasonic PV-GS400 camcorder that my Mac Pro refuses to recognize. First a list of what I have confirmed.
    1) There is nothing wrong with the camcorder (It will work with an iMac at my work running Leopard)
    2) There is nothing wrong with the cable I am using (Connected a friend's cam corder using it)
    3) There is nothing wrong with my firewire (I have a LaCie drive and have been able to interface to a different camcorder)
    4) I have reinstalled quicktime w/o fixing the problem.
    5) I installed my orig Tiger OS on my firewire drive and still see the same problem.
    6) Both iMovieHD and FinalCut fail to recognize the camcorder.
    7) All of my software and firmware is up to date.
    8) I have confirmed all settings on my camcorder (It worked with another mac)
    Now for the information regarding my mac:
    2x3GHz Dual Core Xeon
    OS X 10.4.11
    Model MacPro1,1
    Rom Version MP11.005C.B08
    SMC Version 1.7f10 (Don't know what this is)
    I appreciate any suggestions, there are only 2 things left to try (as far as I can see)
    1) New OS
    2) Try a Firewire 800 cable
    I have searched the net quite a bit over this issue and I feel I have done my homework with no success. I have also heard some disturbing comments / BS regarding certain camcorders "just not working" with certain Mac / PCs. Is this really true?
    Again thanks for any thoughts.

    I thought this initially myself, but when I had the other camcorder working with my mac I went through the following steps
    1) Use Canon Camorder (iMovie works, I can see the camera in the profiler)
    2) Plug in the GS400 and nothing happens (Can't see it in the profiler)
    3) Use Canon Camcorder again to make sure my cam is not killing the firewire and everything works as in step 1.
    Thank you very much for the suggestion, I also tried a 30 min reset a couple of days ago and no difference.
    Do you know if there are any firewire utilities for looking at plug in events and such?

Maybe you are looking for