Connection to a virtual server

Before I start I know this is really a dumb post so if its too dumb just stop reading and go elsewhere.
I am just having a slight issue with connecting my coldfusion server that resides on my virtual server which my local box host.
I will google this but I am really having a real difficult time making a connection.
Thankjs for the time.

Hi,
To allow the Disk Management snap-in to administer Server Core remotely, perform the following steps:
1. Enable the Remote Volume Management rule group in Windows Firewall on your Server Core installation.
2. Start the Virtual Disk Service (VDS) by typing sc start vds at the command prompt.
You can also type: sc config vds start= auto to configure the service to start automatically each time the computer boots.
Then ran the following command on the core server
netsh advfirewall firewall set rule group="Remote Service Management" new enable=yes
--ran the following command on the Win7 machine
cmdkey /add:<Server name> /user:Administrator /pass:<Password>
The related KB:
Using MMC Snap-ins and RSAT
http://technet.microsoft.com/en-us/library/dd163507.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Connecting to a virtual server in dreamweaver

    Hey guys, I'm hoping I can get an answer to this, I've been kind of struggling with it for a week or so now and frustration is taking over!
    Anyway, I'm making some website for my school right now, and it needs to connect to a database. Now, I created an Ubuntu web server in VMWare and installed LAMP on there. I'm able to FTP my website onto the server and the php works as does everything else. My ONLY problem is connecting to the database itself. I guess I just don't know how to do it. And was hoping someone could guide me in the right direction.
    On my other computer, I have installed XAMPP and actually got everything working perfect. I connected to my database and I was able to transfer info between the site and the DB.
    If anyone knows what I'm talking about or understands what I'm talking replies, thank you so much for your time, I really do appreciate it. And if you need more information I'll glady share with you guys.
    Thanks again,
    Nate

    Probably the first questions you will get here are:
    Show us the connection code you use.
    Is the site/database local or on the internet.
    Is it a MySQL database etc.
    Otherwise people are not able to help you.
    There are good books and als online tutorials of David Power.

  • Virtual Server DB Connection

    Guys, I've posted my problem with the logging on the virtual server. I have another problem as well. I created a JDBC connection on the virtual server. But, it does not write the information into the database
    This is the same WAR file that I deployed on the default server and it runs well. Meaning, it is able to store the information using the JDBC. Both of the WAR file are same.
    Please assist me. Thanks a lot!

    Hi,
    try to start services with database user.
    have you check this?:
    ORA-12547: TNS:lost contact
    --sgc                                                                                                                                                                                                                                                                                                   

  • 10.6.3 virtual server anomalies

    Sure could use some help here. I've installed Snow Leopard 10.6.3 Server in a virtual machine via Parallels. For a brief period I was able to ping this virtual server and even connect to it from Server Admin on my "real" Mac partition. There seemed to be no problem in connecting to the virtual server via its IP of 10.211.55.7 even though the "real" Mac side uses 10.0.1.3.
    I've been trying to teach myself via a manual about Open Directory and at one point worked on getting my virtual server to have proper DNS zones. It took me awhile, but eventually I got the DNS fixed and there was a valid machine entry and reverse zone for the DNS name I had give to the virtual server.
    This was where I got into trouble. Although my DNS entries in the server seem to be working just fine, I've lost the ability to connect from the "real" Mac and I cannot even ping the virtual server anymore. It would seem a no-brainer in that the virtual server is on one virtual subnet and the real Mac is on it's own real subnet; but that's how it was before I did the DNS entries and I was able to remotely connect at that time - hence my confusion. Since I'm learning I don't really yet know how to resolve this conundrum and could use some enlightening. Thanks.

    Changed everything to bridged networking and all is well.

  • VMM is unable to perform this operation without a connection to a Virtual Machine Manager management server.

    Hi,
    I'm running SCOM and VMM integration. For the most part everything is working. However I get lots of alerts generated in regards to my scvmm server.
    This is a the guide I used:
    https://technet.microsoft.com/en-ca/library/hh882396.aspx
    SCOM + VMM 2012r2 Ur4
    One of the Errors(which appears to be root issue):
    The PowerShell script failed with below
    exception
    System.Management.Automation.CmdletInvocationException: VMM is
    unable to perform this operation without a connection to a Virtual Machine
    Manager management server. (Error ID: 1615)
    Use the Get-VMMServer cmdlet
    or the -VMMServer parameter to connect to a Virtual Machine Manager management
    server. For more information, type at the command prompt: Get-Help Get-VMMServer
    -detailed.At line:109 char:12
    + $vmm = Get-SCVMMServer $VMMServer -Credential
    $cred;
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    at
    System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object
    input, Hashtable errorResults, Boolean enumerate)
    at
    System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean
    ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[]
    pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext
    funcContext)
    at
    System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame
    frame)
    at
    System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
    frame)
    at
    System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
    frame)
    Script Name:
    GetStorageSubsystemPerfScript
    One or more workflows were affected by
    this.
    Workflow name:
    Microsoft.SystemCenter.Advisor.StorageSubsystem.Performance.PerfCollection
    Instance
    name: SCVMM01.Domain.com
    Instance ID:
    {B5175EAC-D64D-2553-D567-F19B5C864BBD}
    Management group: OMGRP82

    Can you connect from powershell? get-vmmserver <VMMServerComputerName>
    If this doesn't work it's likely that your VMM server doesn't work. Check Application log to see if there are errors related to VMM service.
    You can also collect traces as described
    here and attach them to this thread.
    Are you using a domain administrator account?  (this is the default allowed after SCVMM is installed - until other users are added).
    also try restarting VMM server or VMM services once.
    this occur if the SQL database owner is indicated as NULL.  Try adding the SQL SA account as db owner.
    refer this once -
    https://social.technet.microsoft.com/Forums/en-US/a4199cb2-ccbf-4bb0-96c1-7a640143f81b/error-id-1615-vmm-is-unable-to-perform-this-operation?forum=virtualmachingmgrhyperv
    Thanks, S K Agrawal

  • Can I install Adobe Connect version 8 on a virtual server?

    Hi everyone.  We are looking to upgrade our version of Adobe Connect and to put it on a virtual server.  Our current enviornment Adobe Connect v8 on a physical server.
    Is this possible?
    Is it supported?
    Has anyone done this and has experienced no problems?
    thank you in advance everyone.
    scott

    Hey Scott,
    Many customers today run Adobe Connect 8 virtually on WinSrv 2008 64-bit.  First make sure you read the page link below that details our tech specifications and that your server is compliant. 
    http://www.adobe.com/products/adobeconnect/tech-specs.html
    Also, you will want to discuss where your DB will reside (on that same virtual or a separate one).  The biggest improvement you will see is with performance.  The speed of the server alone is enough to upgrade.  Microsoft definitely made some improvements there...
    I am assuming you know all the usual WinSrv settings such as Domain, etc...so will not discuss those here..
    Regards,
    Scott@Adobe

  • RDP to virtual server stops connecting

    I have a Windows Server 2008 R2 Hyper-V host running a number of virtual Windows 2008 R2 virtual servers.  I use RDP to remote in to manage the host and guest servers.  On occasion, I find I cannot RDP into one of my virtual servers.  I enter
    the login credentials but the connecting dialog stays on screen and I do not connect.
    I then RDP into the host and use Hyper-V Manager to view my running servers.  I see that the server I cannot get into is running at 5-6%.  Something is running on the server, apparently taking up resources and not allowing me to get in.  I
    also cannot get in from the Hyper-V Manager.  I must reset this virtual server to gain access again.  This happens once or twice a month.  By the way, other users are still able to run apps from this server and it is pingable.
    Can any one offer suggestions on what to look for, how to resolve this?
    Thanks

    Hi ,
    Please check the VM's state in hyper-v manager when it "stopped" .
    What is the host's OS ?
    What is the guest OS ?
    Did you check hyper-v log ( event viewer --> application and services log -->microsoft --> windows -->then check   hyper-v logs to find some useful information )
    Also please check event log in VM .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Need to create a virtual server and give its access to another admin

    Dear Sir,
    I am a new admin and have 5 Blade server "HP ProLiant BL660c Gen8".
    I access these servers through HP enclosure.
    I have to install Hyper-V on server 1 which consisted of the OS windows server 2012 R2 Datacenter edition.
    I created a plan to create 5 Hyper-V VM's on the physical server and I requested the IT department network Admin that I want these 5 VM's to able to connect to each other.
    The network Admin created a Trunking configuration on the physical server and after this setup he provided me Hyper-v node IP address and 5 more IP addresses for the 5 Hyper-v VM's.
    Now it was left to me to Add the Hyper-v role and create 5 VM's.
    While Adding the Hyper-V role, I was asked in the middle of the setup to add the network adapter for
    connecting to external network.
    I went inside the network connection settings and I see one network adapter "Microsoft Multiplexer"
    which had the IP address of the Hyper-V node which was given  to be me by Network Admin.
    Besides this I found following Network Adapter: (Mgmt,Trunk):(Mgmt A, Trunk A);(Mgmt B, Trunk B) =Total
    6 Network Adapter out of which only "Mgmt" was configured with the IP address of the Hyper-v node given by my Network Admin. Remaining all other Network adapters IPV4 configuration
    was unchecked except "Mgmt" 
    So I selected the "Mgmt" connection while Installing the Hyper-v role
    SO I chose this Network connection for adding the Hyper-V role.
    My question: Did I chose the correct Network Adapter.
    After doing this I created a VM-1 and tried to assign the IP address given by the Network Admin. But the network Admin did not provide me the default gateway so I used the deafult gateway according to the IP address and used the last digit as "1"
    like a general installation.
    Now my question is: 1.How can I use this VM to be used as a Virtual server?
    2. I would like to open this VM through my browser by entering the IP address of this VM-1. How can I do this?
    Because I access my physical server through the IP address. SO in the similar way I want to access this VM-1 through the IP address
    OR is there any alternate way to access this VM-1 separately.
    My Requirement: I need to give VM-1 access to another admin to Install his application on it. SO how to give him to access this VM directly?
    This is my main query.
    Waiting for your reply.
    Thanks & Regards,
    Ahmed

    Jawin, Jacob, etc.. are fine for creating COM clients but COM servers is a totally different story. I suspect you'll either have to write your own JNI or get out your C/C++ compiler.

  • Connect to Microsoft SQL server 2012

    HI,
    Currently My OSB connects to MS SQL server to get some data and then construct the request to submit to another web service. But recently the SQL server that I connect to has upgraded(previously was MS SQL 2005) to MS SQL to 2012. There are certain properties that needs to be changed in the connection property(for example : ApplicationIntent=ReadOnly) and I am not sure where to change this connection property. I am using sqljdbc4.jar for connectivity. Please advice. This is a bit urgent and appreciate if someone can help me out ASAP.
    After the upgrade I am not able to connect to the SQL server DB as well. This is the error
    Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/SGH/LabResults/SCMLabService [ SCMLabService_ptt::SCMLabService(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SCMLabService' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/myAPPConn].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/myAPPConn].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
    You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server.  This exception is considered not retriable, likely due to a modelling mistake.
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/SGH/LabResults/SCMLabService [ SCMLabService_ptt::SCMLabService(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SCMLabService' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/myAPPConn].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/myAPPConn].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
    You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server.  This exception is considered not retriable, likely due to a modelling mistake.
    at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:155)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
    at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
    at sun.reflect.GeneratedMethodAccessor1269.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
    at $Proxy143.sendMessageAsync(Unknown Source)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
    at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:377)
    at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:76)
    at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:134)
    at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:132)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
    at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
    at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
    at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
    at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
    at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_1033_WLStub.invoke(Unknown Source)
    at com.bea.alsb.console.test.TestServiceClient.invoke(TestServiceClient.java:174)
    at com.bea.alsb.console.test.actions.DefaultRequestAction.invoke(DefaultRequestAction.java:117)
    at com.bea.alsb.console.test.actions.DefaultRequestAction.execute(DefaultRequestAction.java:70)
    at com.bea.alsb.console.test.actions.ServiceRequestAction.execute(ServiceRequestAction.java:143)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
    at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
    at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
    at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
    at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
    at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
    at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
    at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
    at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
    at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
    at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
    at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
    at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
    at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
    at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
    at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
    at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
    at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
    at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
    at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
    at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
    at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
    at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
    at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
    at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/SGH/LabResults/SCMLabService [ SCMLabService_ptt::SCMLabService(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SCMLabService' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/myAPPConn].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/myAPPConn].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
    You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server.  This exception is considered not retriable, likely due to a modelling mistake.
    Thanks in advance
    Sridhar

    Hi All,
    I really appreciate your valuable inputs. My hair about to fall because of this problem
    L
    Tom, thanks, I have gone through that article weeks ago, but no luck
    J
    The Summary:
    I have made a work around to resolve my problem. I have created a new virtual server on the second physical DELL server (with SQL Express 2012).
    The problem seems to be a network issue on the hyper-V virtual switch!!
    More details:
    As described previously, VS connects to SQL service within the same Hyper-V only, although all configuration are right. From any PC within my domain, I can connect to the SQL server on the first Hyper-V service using the ODBC or the connection string file
    (.UDL), BUT not through the “visual studio express 2012 web” !!!!!!!!!
    Now, I can connect from any PC (using visual studio express 2012 web) to any SQL server Express 2012 on the second Hyper-V .
    I have made 4 virtual service on the first hyperV and 4 on the second HyperV. All with the same result:
    VS on PC’s can connect normally to any SQL server on the second HyperV
    VS on PC’s can NOT connect to any SQL server on the first HyperV
    VS on virtual servers on first HyperV can connect normally to any SQL server on the same physical machine/Same hyperV .
    VS on virtual servers on first HyperV can connect normally to any SQL server on the second physical machine/Second hyperV .
    VS on virtual servers on the second HyperV can connect to any SQL server on PC’s or on the second HyperV/Same physical machine.
    VS on virtual servers on the second HyperV can NOT connect SQL servers on the first HyperV
    Long story that last more than one month
    L

  • CSS11503 load balancing virtual server IP's

    Hi CSS experts,
    We have a Cisco Content Services Switch 11503 Load Balancer which seems to require Real Server NICs to be plugged in. When I plug a cable from our Cisco 3560 switch into the Cisco Load Balancer, it can't see the 2 web server IP's that I'm trying to load balance for HTTP/HTTPS. The virtual IP does not display the webpage of either web servers.
    On the otherhand, when I use two physically separate 1U web servers and physically plug 2 cables (1 for each server) into the CSS 8 port switch, the virtual IP is able to redirect the traffic to both web servers.
    How do I configure the CSS to load balance and actually see 2 IP's on the network which isn't plugged in physically per server into the CSS 8 port switch.
    Internet->CSS->1 cable plugged into Cisco switch which host 2 web servers.
    Thanks,
    Mike
    Configuration:
    circuit VLAN1
    ip address 192.168.1.10 255.255.255.0
    service Websrv1
    ip address 192.168.1.104
    protocol tcp
    port 80
    keepalive type http non-persistent
    active
    service Websrv1SSL
    ip address 192.168.1.104
    protocol tcp
    port 443
    keepalive type ssl
    active
    service Websrv2
    ip address 192.168.1.101
    protocol tcp
    port 80
    keepalive type http non-persistent
    active
    service Websrv2SSL
    ip address 192.168.1.101
    protocol tcp
    port 443
    keepalive type ssl
    active
    owner Web
    content NG
    add service Websrv1
    add service Websrv2
    vip address 192.168.1.7
    port 80
    protocol tcp
    advanced-balance arrowpoint-cookie
    url "/*"
    active
    content NGSSL
    add service Websrv1SSL
    add service Websrv2SSL
    vip address 192.168.1.7
    port 443
    protocol tcp
    advanced-balance sticky-srcip
    sticky-inact-timeout 60
    active

    I checked the connectivity to the servers form the CSS and it was good. I was able to ping, and the connection status in sh service summary incremented by 1 each time I tried to connect. From the server, I was able to ping back to the IP of the CSS and the VIP address as well. I have tried using only 1 server for 1 VIP. I have tried changing the default gateway on the server to the IP of the CSS and the VIP IP as well. It still doesn't seem to help. Anymore suggestions for me to try?
    Thanks
    Mike

  • Flex 3 and connection to remote ubuntu server

    Good morning,
    I'm trying to retrieve the result from a SQL query to populate a datagrid.
    My server is a Ubuntu server on a virtual machine. I created the tables I want to extract information from using MySQLWorkbench and put them on my ubuntu server. Flex is running on my Mac.
    I have the following code in the mxml file of my Flex project:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="rest_service.send()">
        <mx:HTTPService id="rest_service" url="http://192.168.56.101/testhtml.php"/>
        <mx:DataGrid left="0" right="0" top="0" bottom="0"
            dataProvider="{rest_service.lastResult.people.person}">
            <mx:columns>
               <mx:DataGridColumn headerText="Test ID" dataField="userid"/>
               <mx:DataGridColumn headerText="Name" dataField="username"/>
               <mx:DataGridColumn headerText="Email" dataField="emailaddress"/> 
            </mx:columns>
        </mx:DataGrid>
    </mx:Application>
    The testhtml.php file is on the server (in the /var/www/ folder) and looks like this:
    <?php
       require ("Connection.php");
    $db_handle = mysql_connect($server, $user_name, $password);
    $db_found = mysql_select_db($database, $db_handle);
    if ($db_found) {
    $Query = "SELECT * from users";
    $Result = mysql_query( $Query );
    //print "allo?" . "<br/>";
    echo htmlspecialchars('<?xml version="1.0" encoding="utf-8"?>')."<br/>";
    echo htmlspecialchars('<people>')."<br/>";
    //print '<people>';
    // Iterate through the rows, printing XML nodes for each
    while( $Row = mysql_fetch_object( $Result ) )
      echo "      ";
      echo htmlspecialchars('<person>') . "<br/>" ;
      echo "            ";
      echo htmlspecialchars('<userid>'.$Row->userid.'') ;
      echo htmlspecialchars('</userid>') . "<br/>";
      echo "            ";
      echo htmlspecialchars('<username>'.$Row->username.'');
      echo htmlspecialchars('</username>') . "<br/>";
      echo "            ";
      echo htmlspecialchars('<emailaddress>'.$Row->emailaddress.'');
      // echo htmlspecialchars('<emailaddress>"'.$Row->emailaddress.'"');
      echo htmlspecialchars('</emailaddress>') . "<br/>";
      echo "      ";
      echo htmlspecialchars('</person>') . "<br/>" ;
    echo htmlspecialchars('</people>');
    mysql_close($db_handle);
    else {
    print "Database NOT Found ";
    mysql_close($db_handle);
    ?>
    I tested the php file by typing http://192.168.56.101/testhtml.php in my web browser and I get the xml code expected. The problem is that I don't think Flex is actually connecting to the server.... I have noticed that when you create a new project you can select an application server type but I have no idea what to put for the web root and the root url (I picked php in the list of options for the server type).
    My server is not hosted on my machine but on a virtual machine. Is there something I need to install on my server, and if yes, on which folder?
    Your help would be greatly appreciated. I'm a newbie and have lots to learn and I have been stuck on this for a while now.
    Thank you again,
    supernous

    Forget it. I'm an idiot.
    I forgot to active the "Allow remote admin" setting again

  • Virtual server and Firewall

    Hi all,
    Sorry if this is a too basic question. I'm trying to understand how our system works as I'm not the one that set it up in the first place. The Firewall crashed today and needed rebooted. When connected to the the server it says "Kernel-Power" and
    ID 41 so to me it sounds like the server shut down unexpectedly but I'm not sure. When the Firewall was rebooted everything was working fine again. So I have several questions that I'm thinking of. How can I figure out what really happened? Did the server
    shut down or was it just the firewall? Is it possible that the server (or client computers) sent information through the firewall, the firewall's cache got fully loaded and couldn't give a response and because the server didn't get a response it rebooted and
    the firewall crashed? Sounds unlikely, doesn't it. I maybe should say that when the firewall was down, as I said, I could access the server through RDC but the firewall was completely inaccessible so I had to press the physical power button to restart the
    Firewall. And the last week the network overall has been going very slow (which I tried to resolve yesterday by rebooting the routers that we have and that seemed to work).
    Thankful for any ideas!

    Hi Nitman,
    You are welcome to post the feedback here when using microsoft products .
    "is it possible to setup Windows Server 2008 in a way that it runs on a virtual machine but physically on three different machines? "
    If you want to enable hyper-v role in server 2008 (you can enable hyper-v role directly in 2008R2 and later ), please refer to the article below :
    http://technet.microsoft.com/en-us/magazine/dd744752.aspx
    The prerequisites for hyper-v :
    http://technet.microsoft.com/en-us/library/cc731898.aspx
    Hyper-v getting started guide :
    http://technet.microsoft.com/en-us/library/cc732470(v=WS.10).aspx
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Outlook is unable to connect to the proxy server.(Error Code 10) when users opened Outlook 2010

    Hi All
    Exchange Server - 2013 CU2 (Windows 2012 Standard)
    AD Server - 2003 R2 SP2
    exchange-svr01.domain.com - internal name
    mail.company.net - external name
    When users opened Outlook 2010, they will encountered
    "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
    Outlook is unable to connect to the proxy server.(Error Code 10)"
    I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
    The RPC/HTTP test completed successfully.
        Validating the certificate name.
         Certificate name validation failed.
         Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
    Testing SSL mutual authentication with the RPC proxy server.
         The test passed with some warnings encountered.
    The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
     please help.

    Hi PS CL
    [PS] C:\Windows\system32>Get-OutlookAnywhere
    RunspaceId                         : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
    ServerName                         : exchange-svr01
    SSLOffloading                      : True
    ExternalHostname                   : mail.company.net
    InternalHostname                   : exchange-svr01.domain.com
    ExternalClientAuthenticationMethod : Negotiate
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    XropUrl                            :
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    MetabasePath                       : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
    Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
    ExtendedProtectionTokenChecking    : None
    ExtendedProtectionFlags            : {}
    ExtendedProtectionSPNList          : {}
    AdminDisplayVersion                : Version 15.0 (Build 712.22)
    Server                             : exchange-svr01
    AdminDisplayName                   :
    ExchangeVersion                    : 0.20 (15.0.0.0)
    Name                               : Rpc (Default Web Site)
    DistinguishedName                  : CN=Rpc (Default Web
                                         Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
    Administrative
                                         Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=domain,CN=Microsoft
                                         Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
    Identity                           : exchange-svr01\Rpc (Default Web Site)
    Guid                               : 33c3cb74-e490-487d-844c-4072334089a1
    ObjectCategory                     : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
    ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
    WhenChanged                        : 8/17/2013 10:14:55 AM
    WhenCreated                        : 6/25/2013 1:47:50 PM
    WhenChangedUTC                     : 8/17/2013 2:14:55 AM
    WhenCreatedUTC                     : 6/25/2013 5:47:50 AM
    OrganizationId                     :
    OriginatingServer                  : ADserver.domain.COM
    IsValid                            : True
    ObjectState                        : Changed

  • How to join local computer to virtual server domain ?

    Hi everyone,
    I am new to Window Azure cloud computing. I found many articles and tutorials available online but I am kind of lost because I don't what I need to do to achieve my scenario.
    Scenario: I want to migrate my servers to cloud and retire all local servers such as DC and file server. At the same time, I wish to control the network traffic to limit the clients access to Internet resources. I am not sure retiring the
    all local servers is something right to do and how to do.
    What I have done:
    1. Site-to-Site VPN connection with Dell Sonicwall TZ205 to VNet. (I followed the route-based VPN in this document -> https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CB0QFjAA&url=https%3A%2F%2Fsupport.software.dell.com%2Fdownload%2Fdownloads%3Fid%3D5343958&ei=ykGhVIK6GISWuASU6oHQBw&usg=AFQjCNGGS6fsuK6IHAWyQgZi5fey4xhfKg&bvm=bv.82001339,d.c2E&cad=rja)
    2. Created a VM in the VNet. (I can ping the VM from computers connected to TZ205)
    3. Installed active directory and configured the domain forest.
    What I need to do:
    1. How to join the local computers to the virtual server domain controller with S2S and P2S VPN. (Some Internet resources mentioned I need to install Connect agent in order to do this)
    Extra questions:
    1. Is it possible to request the clients to provide account credentials before the point-to-site VPN to VNet is established ?
    2. How do I configure the TZ205 VPN router to send all the Internet traffic to the VNet instead of the ISP gateway? The computers connected to TZ205 firewall router public IP address doesn't change to the VNet gateway IP.
    Thanks for your time reading my questions. It will be helpful if you can provide me some useful links or ideas.
    Sincerely,
    Chee-Kian

    Greetings!
    I assume there is connectivity between on-prem device and DC on Azure VM.
    You can set the Internal IP of the DC as DNS on the on-prem device and trying joining it to the existing domain. Please note to use S2S VPN.
    It is not possible to provide user credentials while connecting to vNet via P2S VPN. It's a certificate based authentication (which is so by design).
    With regards to your query to send all internet traffic to vNet instead of ISP gateway. Please refer to Forced Tunneling:
    http://msdn.microsoft.com/en-us/library/azure/dn835140.aspx
    Hope this helps.
    Thank you,
    Arvind

  • Iws6sp3 Configuring virtual server administrator�s user interface

    Hi I am trying to configure my virtual server admininstrator interface. I followed the admin guide iws60 816-1379-01 May 2001, Chapter 13 "Using Virtual Servers" page 307. I followed all the steps however when I go to my browser, what should I type in for the URL?
    Example given:
    server_name:port/user-app/server_instance/virtual_server_ID
    Q1. should mine will be:
    http://127.0.0.1:8889/user-app/test.mytest.com/https-test.mytest.com
    if I am trying out my default virtual server?
    Q2. If I have created another virtual server called, esample.indoors.com will that by my vistual_server_id?
    Q3. Why after adding the extra codes into my server.xml, I cannot access my default admin port which is 8888?
    Below is my server.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- declare any variables to be used in the server.xml file in the ATTLIST below -->
    <!DOCTYPE SERVER SYSTEM "server.dtd" [
    <!ATTLIST VARS
    docroot CDATA #IMPLIED
    adminusers CDATA #IMPLIED
    webapps_file CDATA #IMPLIED
    webapps_enable CDATA #IMPLIED
    accesslog CDATA #IMPLIED
    user CDATA #IMPLIED
    group CDATA #IMPLIED
    chroot CDATA #IMPLIED
    dir CDATA #IMPLIED
    nice CDATA #IMPLIED
    >
    ]>
    <SERVER legacyls="ls1">
    <VARS accesslog="E:/iPlanet/iws6sp3/https-admserv/logs/access"/>
    <LS id="ls1" ip="0.0.0.0" port="8888" security="off" acceptorthreads="1">
    <CONNECTIONGROUP id="group1" matchingip="default" servername="test.mytest.com" defaultvs="https-admserv"/>
    </LS>
    <MIME id="mime1" file="mime.types" />
    <ACLFILE id="acl1" file="E:/iPlanet/iws6sp3/httpacl/generated.https-admserv.acl" />
    <VSCLASS id="defaultclass" objectfile="obj.conf" rootobject="default" acceptlanguage="on">
    <VS id="https-admserv" connections="group1" mime="mime1" urlhosts="test.mytest.com" aclids="acl1">
    <VARS webapps_file="web-apps.xml" webapps_enable="on"/>
    <USERDB id="default" database="default" />
    </VS>
    </VSCLASS>
    <LS id="ls5" ip="0.0.0.0" port="8889" security="off" acceptorthreads="1" blocking="no">
    <CONNECTIONGROUP id="group5" matchingip="default" servername="test.mytest.com"
    defaultvs="useradmin"/>
    </LS>
    <VSCLASS id="userclass" objectfile="userclass.obj.conf" rootobject="default" acceptlanguage="on">
    <VS id="useradmin" connections="group5" state="on" mime="mime1" urlhosts="user-app" aclids="acl1">
    <VARS webapps_file="user-apps.xml" webapps_enable="on"/>
    <USERDB id="default" database="default" />
    </VS>
    </VSCLASS>
    </SERVER>

    Hi Chris,
    thanks for your reply! Pilot Extended Listener; Pilot Listener; WWW and JBOSS are running and I started Pilot Extended Listener before Jboss, but it doesn't work.
    It tries to open http://localhost/pilot/scriptmain.pw?userinfo=/pilot/pipadmin/adminstart4.htm but there isn't a file "scriptmain.pw" in the pilot directory, only the file "scriptmain.pip". Maybe it is missing?!
    best regards,
    Rob

Maybe you are looking for