Consolidation Area - Dependent Settings : Selections

Hi All
Just a Small Verification form BCS Folks. I have One Cons Area and Standard BW Queries for Reporting and am trying to Create Transport.
" Under Cons Area - Dep Settings"
Do I need to Select SINGLE Selections and XBRL Mapping for TRANSPORT? or
Just SINGLE Selections
Appreciated Your Quick Response
Thx
Ramana

If you have defined Single selection, you can select that to transport.
If you have not implemented XBRL , then why you need to select it for transport?

Similar Messages

What are the settings for capturing video from Canon HV20

Hi All,
I want to capture video from Canon HV20 with Premiere Elements 11. What kind of settings should I use to capture the video with full information?
Here is what I did:
1) According the manual, I went to Capture settings panel (Edit > Project Settings > Capture) and selected HDV as capture format, because my video is at high definition.
2) In addition, I checked "Capture to Timeline" and "Split Scenes by cotent".
Are these settings enough?
Thanks.

HV20user
Sounds reasonable, using Add Media/HDV Camcorder, but....
Have you reviewed the Adobe write up on Premiere Elements 11 DV and HDV capture firewire into it.
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
The mention of Get Media instead of Add Media makes me wonder if the video's instructor was demo'ing from Premiere Elements 10, but...
Major factors have always included having Premiere Elements project preset set correctly to correspond to your camera settings...For HDV data capture firewire...
NTSC HDV HDV 1080p30 or PAL HDV HDV 1080p25 depending on if you are targeting a NTSC or PAL area where frame rates are typically a consideration.
I had not done any DV or HDV data capture firewire into Premiere Elements. But, Premiere Elements 11's take over of the project preset setting would encourage me to encourage you to verify your project settings before the capture.
There are probably many more, but the following is online discussion of one Canon HV20 issue
http://forum.videohelp.com/threads/316970-video-capture-problems-HV20-camcorder-is-control led-but-no-video-capture
If you experience difficulty with the HDV capture fireware into Premiere Elements 11, you might consider what some others have done in this regard, that is, use HDVSplit for the capture firewire and then import the split (.m2t) clips "Add Media" into Premiere Elements 11 with the appropriate HDV HDV 1080p (1440 x 1080 HD anamorphic 16:9) project preset.
Please update us on your progress when you get a chance.
Thanks.
ATR

What are the Settings for DefaultFreq as YTD...

Hi Experts,
If I want to set “DefaultFreq” as YTD, what are the settings I have to do.
1) In Application profile (Time Periods, View, and Periods).
2) In Scenario (DefaultFreq and Default View).
And also the load data file format.
Pls explain me in detail.
Thanks in advance
Sai

Hi Sai
1. When you are creating the frequencies in Application profile for MTD, QTD or HYTD Frequency, System Automatically creates the YTD Frequency.
So no need to do any changes for Application Profile.
2. Create a scenario name with YTD, like Actual,Budget...
In Scenario Dimension mention below details.
Member- YTD (YTD is Scenario name)
Description –YTD Scenario
DefaultFreq-YTD
DefaultView-YTD
ZeroviewForNonadj-YTD
ZeroviewForadj-YTD
DefFreqForICTrans-YTD
3. To Load the Data into HFM Select the Scenario: YTD and Period: *[Year]*
Select the Proper POV to load the DATA.
Scenario:YTD
Year: 2012
Period:[Year]
View:YTD
Entity:India
Value:INR
Account:ExtSales
ICP:[ICP None]
Custom1:NOCC
Custom2:NO Cust
Custom3:[None]
Custom4:[None]
Sample Data file
!Data
YTD;2012;[Year];YTD;India;INR;ExtSales;[icp none];nocc;no cust;[none];[none];90000
All the best......
<Font color="Blue">
Regards
Dev
</Font>

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the settings for Transport?

What are the settings for Transport?

u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

Where are the settings to make Acrobat software recognize my scanner?

Where are the settings to make Acrobat software recognize my scanner? I've had my computer on a road trip. When I returned to the home office, I can't get Adobe Acrobat 10 Pro software to recognize my scanner, which is a 4-in-one printer. Acrobat will print to the printer, but I can't get it to recognize the scanner to scan a document. Any suggestions as to how to fix this?

Open the Acrobat application(Acrobat X) and later navigate to Create>PDF from scanner>Configure presets and later select the Scanner which is connected to your computer and check it will work.
If you are getting two options ie WIA and TWAIN please select TWAIN as Acrobat is compatible with TWAIN interface than WIA.

View packages depending on selected package

TL; DR: Is there a way to use pacman -Q to see what packages are depending on a particular package?
Basically what's in the title.
I'm always worried about removing packages in Arch here because I don't want to break (an)other package(s).
I have made a file named "dependencies" that lists the dependencies selected by pacman for each package I've installed from the beginning, however it's not necessarily in chronological order, and you know that if you already have a particular package that a new package you're looking to install depends on, it won't tell you it's a dependency, because it's already there!
I'm looking to remove avant-window-navigator and any useless packages left behind, if it matters.

> pacman -Qi glibc
Name : glibc
Version : 2.12.1-2
URL : http://www.gnu.org/software/libc
Licenses : GPL LGPL
Groups : base
Provides : None
Depends On : linux-api-headers>=2.6.34 tzdata
Optional Deps : None
Required By : a52dec aalib alsa-lib attr audiofile bash bash3
binutils bison bzip2 cabextract calc cdparanoia
coreutils cracklib dcron device-mapper dhcpcd diffutils
dmidecode eject elfutils eventlog expat faac fakeroot
file findutils flac flex foomatic-filters fuse gawk
So that tells you which package need another package. Pacman won't let you remove a package unless that list is empty anyway.
Read the man page for details on how to remove a package and all its dependencies.

Where are the settings and import buttons

I finally got my home sharing to work. But after selecting all, there are no "settings" or "import" buttons on the bottom right of iTunes. Help!

This button does not exist on my computers either. Been looking all day. Can share music but can't transfer library ITunes you are about to lose a customer.

SEM BCS - Error in Consolidation Area

Dear Experts,
When i save my consolidation area, there is an error message.
it is "Syntax error in GP_ERR_UCDTYPE, row 8.880".
The Diagnosis said "Component called REFYEAR already exists".
I can not found "REFYEAR" in my system.
I am using info cube 0BCS_C11.
Please help....
Thanks in advance.

Hello
Though I am not an expert in this area I have found the following information with a similar problem in another customer that maybe useful:
"On the basis of your problem description it seems that you assigned in
the data basis maintenance the `SEM-BCS info-object catalogue` for
characteristics and key figures to the two info-object catalogues (on
the first tab strip of data basis maintenance). This makes the trouble.
Please read the F1 help carefully and if you need an extra info-object
catalogue, then please create one. Please note that the SEM-BCS standard
info-object catalogues are NOT appropriate for this purpose.
F1 help:
"InfoObject Catalog for Characteristics
InfoObject catalog of the SAP Business Information Warehouse to include
additional characteristics.
Use
You use this field as follows:
In a data basis, the InfoObject catalog contains the quantity of
additional fields that can be selected on the Additional Financial Data
tab page for investments and equity.
In a source data basis, the InfoObject catalog portrays the definition
of an external field catalog, which can be used in a method of the
category Flexible Upload, if a data basis was allocated to the source
data basis."
In order to remove the info-object catalogs you can use the transaction
UCWB01.
Hope it helps .
Regards
Javier

My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac

My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac and any suggestions?

In the AirPort Utility, I selected the Advanced tab, and then selected Port Mapping.
Q: What service do I choose from the drop-down menu? Also, where do I enter the two ports you mentioned? Public UDP Port(s)? Public TCP Port(s)? Private IP Address: Private UDPPort Private TCP Port?
still confused, I guess. Thanks!

What are dependency types?

What are dependancy types in variant configuration ?
& what they indicate?
1. Precondition
2. Selection Condition
3. Action
4. Procedure
5. Constraint

Dependancy types in Variant configuration:-
Dependencies let you do the following:
Describe the interdependencies between characteristics and characteristic values
Control which components are selected from a bill of material (BOM) and which operations are selected from a task list
Change the values of fields in BOM items and operations during configuration
1. Precondition
You can use preconditions to hide characteristics and characteristic values that are not allowed and thereby ensure that the configuration of an object is consistent.
2. Selection Condition
You can use selection conditions to ensure that all the objects relevant to a variant are selected:
Selection conditions determine which variants require a specific component or operation
Selection conditions determine when it is mandatory to assign a value to a characteristic
You can allocate selection conditions to the following objects:
Characteristics
BOM items
Operations in task lists
Sub-operations
Sequences of operations
Production resources/tools (PRTs)
3. Action
You use actions to infer values for characteristics. You cannot overwrite values that are set by an action.
You can also use actions to change field values in BOM items or operations in routings.
Now in ECC6 this is Obsolete
4. Procedure
You can use procedures to infer values for characteristics
You can assign procedures to the following objects:
The characteristic value that triggers the procedure
The characteristic that triggers the procedure
The configuration profile of the configurable object
5. Constraint
This dependency type is mainly for intensively interactive configuration tasks and for configuration tasks in which you need to take into account the dependencies between the characteristics of several objects. The main purpose of a constraint is to monitor the consistency of a configuration.
Regards
Samunder Singh
U can also refer the link
http://help.sap.com/erp2005_ehp_04/helpdata/EN/92/58c228417011d189ec0000e81ddfac/frameset.htm

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

What is the best practice to replicate the change of an object name in HANA AT/AN view where there are dependent views in it?

Dear All HANA Studio Experts,
I'm using SAP HANA Studio Version: 1.0.68 in our current landscape and looking for a expert and intelligent solution for a problem that we have encountered recently.
We have created multiple AT views, AN views and created CA views on top of these AN views to cater different LOB related to our organization. We have also designed BO universe on top of the CA views from HANA and finally created webi reports out of these universes.
In a particular scenario, we have one AT view which is been used by 10 different AN views.
Now we had 3 Requirements like below:
1. To add a new field in this AT view,
2. To update an existing field in this AT view and
3. To remove a field from this AT view which is not required anymore.
Problems Encountered:
Req 1. When we added a new field (e.g. XX_ADD) in the AT view and activate it, its throwing warning that there are dependent objects on this AT view. However no error thrown and it leads to re-work to check if this new field is available in all those dependent views and re-deployed those all.
Question: How to ensure if this addition of object will not impact the rest of the dependent views?
Req 2. When we updated an existing field (e.g. XX_UPDATE_NEW) in the AT view and activate it, its throwing warning that there are dependent objects on this AT view. However the BO reports built on top of these different dependent AN views became inoperative.
Question: How to ensure if we need to update the name of an existing object it will not impact the rest of the dependent AN views?
Req 3. Finally we have removed one object from the existing fields as it is not required. Again we faced warnings that there are dependent AN views on this AT view.
Question: How to ensure if we need to delete an existing object, it will automatically reflect in all dependent AN views?
Please suggest, if it is a good practice to create separate AT,AN and CA views for each of the LOB's and avoiding any dependent views (hence gradually the total no. of logical objects will be increase) or to reuse the AT/AN views whenever possible and in case of any updation/deletion we need to do a huge rework to check and redeploy the dependent objects again and again?
Thanks for reading this detailed explanation and please let me know in case you need any other inputs....don't hesitate to share your expert thoughts on this.

Hi Avishek,
Are you using Development or Modeller Prespective?
Avishek Chakraborty wrote:
Now we had 3 Requirements like below:
1. To add a new field in this AT view,
2. To update an existing field in this AT view and
3. To remove a field from this AT view which is not required anymore.
1) Adding a new Field in the AT View and after activating the view. Then you have to Refresh/Check out the dependent views to see if it is reflecting.
2) We cannot update the existing field in the AT view i.e like name change if it is being already used in joins in any of the dependent views. It will not allow you to activate
3) To remove the field which is not being used any where, we can make the changes in AT View and Refresh/Check out to see if the dependent views are reflecting the change
Regards,
Krishna Tangudu

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out.

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out of one devise before using another?

Some Internet providers that limit access to a single device at a time do so by the device's hardware MAC address. If your ISP is one of those, you may be able to substitute the MAC address of your AirPort Express base station for the computer. I would suggest that you contact them to find out if this is allowable.

Consolidation Area - Dependent Settings : Selections

Similar Messages

Maybe you are looking for