Contact list not show after migration Exchange 2007 to 2010

Hello.
I have a old infraestructure with exchange 2007 and new organizacion with exchnage 2010
If I migrate a mailbox from 2007 to 2010 I can open the mailbox on 2010 without problems,
From owa works correct active sync and outlook work correct, I can send a receive mails but, from outlook client I can not see the Global Address list.
Step by step:
User with mailbox over exchange 2007.
Outlook, owa active sync.. all is working fine and I can see the Global Addres list from owa and from outlook.
Move mailbox from 2007 to 2010
Completed ok without errors
The user mailbox on 2010 working fine, I can access by owa by outlook and active sync and from owa I can see the Global Addres list but from outlook I can not see the GAL.
I've tried diferents outlook versions: 2003 2007 and 2010 but I can not see the GAL
If I try to download de GAL from Outlook I see outlook download the correct list and complete ok without erros but not show on outlook.
I don't know why..
Exchange 2007 with sp3 and 2010 with sp3 too.
Any idea how could resolve this problem?
Thanks in advance¡

Hi
Did you migrate your address list or create a new one? Move-OfflineAddressBook "Default Offline Address Book" -Server <your Exchange 2010 server>
Get-OfflineAddressBook | fl *server*
Set-OfflineAddressBook "\Default Offline Address Book" -VirtualDirectories "your exchange server\OAB (Default Web Site)"

Similar Messages

  • Contact list not showing up after upgrade to iOS5

    Just upgraded to iOS5 now my contact list is blank but the contacts still show up on incoming calls and text messages. I have the iPhone4 and yes I have reset the phone. Any clue how to get them to list again in the contact area? Thanks for any help!

    My contacts were still in place after upgrading to 5, but I could not get into them.  Clicking on a name would just freeze the Address Book.   Some other thread here suggested the "soft reset", holding down the Home and Power buttons at the same time and power cycling the phone.   That solved the problem for me. 

  • Distribution group not showing up in Exchange 2007 GAL

    Hello,
    We have AD running on a 2003 R2 SP2 server
    We have Exchange 2007 running on a 2003 R2 SP2 server on the same domain.
    I put a distribution group (all staff) on the active directory server.    I can e-mail to [email protected] and it goes to everyone I put in that group no problem.   However if I do check name, allstaff isn't listed, I have to go to contacts and drop down to find that distribution group (under groups).   How do I get it into the global address list so it shows for anyone pressing alt K or checkname along with other members of our domain - I don't want them to have to drop down under the contacts item in outlook to go to groups to find it.
    Thanks

    Thanks - I don't think the regen of the address book is really the key but modifying the distribution group in AD after you create it in EMC.   I had regened the OAB a few times since last friday but the allstaff was only available under groups in outlook.   Maintenance runs every morning at 5AM and that didn't update the group into lookup in outlook.   It seems to be the broken AD interface between exchange 2007 and windows 2003.   You used to be able to see all exchange data for a user or group in AD however now part of it is in Exchange 2007 Management console and some is in AD users and computers.  
    THis is just one more item in my opinion along with the lack of gui control in exchange 2007 that displays the half baked creation that is Exchange 2007.   Is the next version of WIndows Server going to require all DOS commands like Exchange 2007 does to do any AD work?   Gussy it up with a fancy name like "POWERSHELL" but it is just another way of saying DOS to me.   Pretty sure PCs became more popular with GUI interfaces.    I used to be an MS FAN (not the same as fanboy who thinks they can do no wrong) but things at MS have taken a SERIOUS turn down hill as of late
    Vista - incredibly bad performance - no such issue with WIndows 95, 98, 2000, XP - and then they claimed it was drivers, then it was third party apps such as AV or firewalls - 5 months later they finally admit as people set up boxes with all the extras turned off with identical hardware and the latest drivers - hmm XP blows the doors off vista for file copy performance - can't imagine why sales suck for business clients and Dell had to start selling XP again.
    BTW - I tried their patch for performance - it actually decreased disk to disk performance on the same box while increasing performance by 20% in network copys however since network performance is up to 500% slower than XP that 20% increase doesn't really help enough to offset internal performance slow downs - here is a tip MS - strip out the DRM scanning and you'll get your performance back.
    Exchange 2007 - ESM worked great in 2003, 2000.   2007 we bring you POWERSHELL known 20 years ago as DOS.   Much easier to write scripts like - ## AutoDisco for EWS
    [array]$SCPCurrent = Get-ClientAccessServer
    $autodiscoResponse = "<Autodiscover xmlns=`"http://schemas.microsoft.com/exchange/autodiscover/outlook/requestschema/2006`">"
    `
    + " <Request>"`
    + " <EMailAddress>" + $siSIDToSearch.WindowsEmailAddress + "</EMailAddress>"`
    + " <AcceptableResponseSchema>http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a</AcceptableResponseSchema>"`
    + " </Request>"`
    + "</Autodiscover>"
    $strRootURI = $SCPCurrent[0].AutoDiscoverServiceInternalUri.absoluteuri
    $WDRequest = [System.Net.WebRequest]::Create($strRootURI)
    $WDRequest.ContentType = "text/xml"
    $WDRequest.Headers.Add("Translate", "F")
    $WDRequest.Method = "Post"
    $WDRequest.UseDefaultCredentials = $True
    $bytes = [System.Text.Encoding]::UTF8.GetBytes($autodiscoResponse)
    $WDRequest.ContentLength = $bytes.Length
    $RequestStream = $WDRequest.GetRequestStream()
    $RequestStream.Write($bytes, 0, $bytes.Length)
    $RequestStream.Close()
    $WDResponse = $WDRequest.GetResponse()
    $ResponseStream = $WDResponse.GetResponseStream()
    $ResponseXmlDoc = new-object System.Xml.XmlDocument
    $ResponseXmlDoc.Load($ResponseStream)
    $EWSNodes = @($ResponseXmlDoc.getElementsByTagName("ASUrl"))
    if ($EWSNodes.length -ne 0){
    $ewsURL = $EWSNodes[0].'#text'
    than just clickin in Exchange System Manager and going to mailbox management like you had to in 2003.   Whew glad that trudgery is gone!   In just 20 lines I can do what I was forced to do in a couple of mouse clicks in the old version - happy days are finally here.
    WM6 - the BT stack was horrible in PPC2003, WM5 it was still bad but we've made it intolerable in WM6 - and we've made sure you can't get in touch with anyone at MS to point out these issues.
    Office 2007 - Gone are all those customizable menus that made your job easy - we've locked them down because we didn't have enough time to fix them after we scrapped our original ribbons interface - we tell you they are locked for security reasons but we'll bring it back as a new feature in the next version of Office.
    Thanks for letting me dump on the *** coming from MS these days - if their surveys actually let you give open feedback it would be great but their surveys about products are more like -
    Would you like to give feedback about VIsta?
    Question 1 -
    Do you think Vista is
    a more colorful
    b more intuitive
    c more visually stimulating
    Question 2
    Do you think the menu bar
    a Has better icons
    b Has better fonts
    c Looks more user friendly
    A real question about my Vista experience would be
    Question 1
    What did you think was better about Vista
    Question 2
    What did you think needs fixing in Vista
    Question 3
    Any additional comments
    MS is determined not to let in any info that might delay releases or improve their products.

  • SkyDrive photos & contact list not showing in FF13

    I have had FF for years & have been happy with it always until FF13 which has caused problems with my use of SkyDrive to share my photos. I have used SkyDrive for a long time too & never had issues until the recent FF13 update. I can use SKYDrive without any problems if I use IE as my browser but in FF13 some photos will not show in a slideshow unless you right-click & choose view original then a separate window opens for that one photo. It is random because if you start slideshow over it may be totally different photo(s) that will not show. Other thing that started since FF updated to 13 is that when I try to 'share' the slideshow my hotmail contacts list will no longer load although it will load if I switch to IE. This is clearly a problem related to FF13 since there is no problem in IE. I prefer to use FF but need it to work for SkyDrive. Please is there a patch for this or can you tell me what to do.

    This is way too technical for me. I have no idea what that is nor do I feel comfortable fiddling with things I don't know anything about.
    Thanks for your help but as I said in my last post I will use IE for sharing SkyDrive until the FF fix comes out.

  • Services for Object (GOS) Attachement List not showing after attachment

    Hi All,
    I have created a new entry for the Generic Object Service List and this links to a copy of the CL_GOS_SRV_ATTACHMENT_CREATE class (Create attachment) with some additional logic. However, after attaching a file, the "Attachment List" does not become available until after I re-enter the transaction. The attachment list is showing the correct attachments.
    After some (understatement...) investigation, I found that even if I try and link the new service to a unchanged copy of the CL_GOS_SRV_ATTACHMENT_CREATE service in SGOSATTR, it is not working. It is attaching fine, but the "Attachment List" entry in the Services for Object Menu is still greyed out. If I attach the original class CL_GOS_SRV_ATTACHMENT_CREATE to the newly created entry it works fine. e.g. straight after I attach a file to the transaction, the menu entry becomes available.
    I can't find where the re-draw of the GOS menu happens and hence can not determine what is going wrong. Does anybody know if this is part of the Kernel or is this actually done in ABAP ?
    Am I missing something ? Debugging including system debugging for two days now and can't find it... very frustrating.
    Any help would be appreciated.
    Thanks,
    Wouter.

    Hi Wouter,
    I had originally posted to ask if you had resolved this since I was facing the same issue, but then deleted my post when I was able to get it working. Sorry, I didn't mean to initiate a flurry of activity in such an old thread.
    My scenario is I created a new GOS service entry in table SGOSATTR using transaction SGOSM. My new service uploads attachments to an external document management system via a call to a RESTful web service. The class I use in the SGOSM entry is a custom subclass of CL_GOS_SRV_URL_CREATE.
    I resolved this issue by taking a look at what CL_GOS_SRV_URL_CREATE does in its EXECUTE method. The key bits to refresh the GOS Attachment List with the new attachment are...
    raise event commit_required. " if SGOSM has the commit flag checked
    raise event service_succeeded
           exporting eo_service = me.
    These events tell any subscribers to go do their thing-- which in this case includes a refresh of the GOS Attachment List. So in the EXECUTE method of my custom subclass, after I call function BINARY_RELATION_CREATE, I raise these events...
    CALL FUNCTION 'BINARY_RELATION_CREATE'
       EXPORTING
           obj_rolea     = gs_object
           obj_roleb    = rel_doc
           relationtype = 'URL'
       EXCEPTIONS
           OTHERS       = 1.
    CASE sy-subrc.
       WHEN 0.
           MESSAGE s043(sgos_msg). " The attachment was successfully created
           RAISE EVENT commit_required.
           RAISE EVENT service_succeeded
                 EXPORTING eo_service = me.
       WHEN OTHERS.
           MESSAGE s042(sgos_msg). " The attachment has not been created
    ENDCASE.
    I hope this is helpful to you even though your initial implementation was a while back. Thanks for replying to my question though!!
    Cheers,
    Amy

  • Material list   not showing after saving the sales document

    Hi
    any body can give the answer  for this question : AFTER SAVING THE SALES ORDER MATERIAL LIST IS NOT SHOWING . Thanks in advance

    Hi,
    Go to Menu EDIT >> DISPLAY RANGE >> ALL ITEMS
    Also set it on sales order document type in VOV8
    Display Range -  UALL
    Kapil

  • Contact pictures not showing after update...

    Just downloaded/installed the update for my 9900 via OTA (7.0.0.585) and when I went through my contact list, I noticed that at least half of them don't have pictures. (which are linked through FB) This was also the case for my BBM contacts. Would this be a glitch after the installation completed? Or is there a fix towards this?
    Thanks!

    Yeah, that's another way of doing it. 
    I'm glad things are back to normal again. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Some items of selection-screen not showing after migration to QA

    Hi Folks,
    I'm trying to help a colleague with something rather weird:
    After migrating code-changes from our DEV- to our QA-environment (SAP_BASIS 620, SAP_APPL 470), a newly added block of the selection-screen doesn't show up. We already spent quite some time debugging and tracing in both DEV and QA but cannot really spot a difference. The new block (B2) and field (S_DATE) show up in the selection-screen internal table SCREEN and the content looks to be identical. In addition to the complete block B2 missing, the frame-title for B3 has also gone AWOL.
    This is happening for a rather straighforward selection-screen definition:
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
    PARAMETERS : p_eaddr LIKE somlreci1-receiver OBLIGATORY .
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t27.
    SELECT-OPTIONS :
    s_date FOR hrp1001-endda NO-EXTENSION.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t23.
    PARAMETERS : p_tstrun AS CHECKBOX.
    SELECTION-SCREEN END OF BLOCK b3.
    During debugging I already single stepped through programs like RSDBRUNT, SAPLSVAR and RSDBSPBL but nothing jumped out at me which could explain the difference between development and QA.
    Do you have an idea where (else) we could look?
    Thanks much and Cheers
    Baerbel

    Hi Vikranth!
    Thanks for your quick reply and suggestion which I immediately followed and - guess what? - it worked! The selection-screen now looks like it should.
    As we never before had this type of issue it never occurred to us to just regenerate the program in QA - next time we'll know and first try this simple fix.
    Thanks again!
    Cheers
    Baerbel

  • External HD not showing after Migration to Yosemite on New iMac

    Morning All,
    Just upgraded my wife's 8YO iMac using Migration Assistant.
    Fixed the Hang Problem that occurred with that, but now the external media drive, with our family iTunes Library refuses to mount on the new computer.  Mounts perfectly on my MacBook Air but does not show up on the iMac at all, not in Finder, not in Disk utility and not using any of the Terminal Window searches that I found. ,
    Please help as my boys will get frustrated if they can't access their movies on Apple TV and there is a week of school holidays to go
    Cheers Steve

    Wish we new what version of OS X you have installed, that sure would be helpful.
    How is the external media drive connected to the iMac, don't assume we know we have no idea!

  • Lync 2011 - Contact List Not Working after Upgrade

    I updated my Lync 2011 client that was running perfectly fine.  Once the update was complete the contact list area of the application is blank.  There is no way to add new contacts or groups.
    I uninstalled and reinstalled the app with the update.  I am having the same issue.
    I am an Office 365 user with a Mac running Mavericks.
    Please help!

    Hi,
    The forum you posted is for Lync Server On Premise only. The issue is more related to Lync online, you can also post a question on Office365 forum for assistance. Thank you for your understanding.
    http://community.office365.com/en-us/forums/163/categories.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Contacts list not showing

    I have 191 contacts in my personal list.  But something happened and now when I click on the bookmarks icon it takes me to add a contact and I cannot access my contacts.  HEL!  lol thanks

    Bookmarks icon takes you to add a contact? Strange.
    Bookmarks are located in your browser.
    Do this... With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
    Now, once back up and running, go to your Address Book, and open it. See your contacts?
    OH, and Roll Tide.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Photos not showing after migrating from iPhoto to Photos.

    I  just upgraded to OS X 10.10.3 and the Photos App, however when I started to migrate my iPhoto libraries (have nine(9) libraries) no pictures show up on the third one I migrated.  I checked and the migrated library file has been created (11.3 GB) however nothing shows up when I select the file and open this library.  Any suggestions by anyone would be appreciated.

    Try these for the first attempt:
    First be sure to have a backup copy of the library if you already don't have one.
    OT

  • Friends "buddy list" not showing after the last update..!!

    I just downloaded the update and for some reason i cant see my friends online, i tried restarting couple of time and its still the same, and two of my other friends are having the same problems, any advise ?

    First.
    Repair permissions.
    Applications > Utilities > Disk Utility
    Highlight your Mac's HD and click the Repair Disk Permissions button near the bottom.
    Restart iChat

  • POST MIGRATION - Project Site cannot be found after migration from 2007 to 2010

    Hi,
       I have done full  migration from Project Server 2007 to Project server 2010. All the databases have been restored. The details in the Project Center are coming correctly. But When I open the Project Site , I get error webpage cannot be
    found. 
    I have done the Bulk update but it is not updating the URL to 2010 URL. 
    Please help.
    Regards

    Use PowerShell to list all the sites in your PWA site collection.
    There are many examples online..  Here is a link that is useful
    http://blogs.msdn.com/b/vijay/archive/2009/10/01/how-to-list-all-the-sub-sites-and-the-site-collections-within-a-sharepoint-web-application-using-windows-powershell.aspx
    Cheers
    Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
    Website http://www.WhartonComputer.com
    Blog http://MyProjectExpert.com contains my field notes and SQL queries

  • After Migration Exchange 2013 does not send mail outside the organization

    Dear,
    After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
    Delivery has failed to these recipients or groups:
    [email protected] ([email protected]) The server has tried to deliver this message,
    without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
    Diagnostic information for administrators:
    Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
    [email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
    10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
    to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
    Original message headers:
    Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
     (192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
     2014 16:13:30 +0600
    Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
     mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
    From: Administrator <[email protected]>
    To: Administrator <[email protected]>
    CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
        <[email protected]>
    Subject: RE: Migration batch mrtmove has completed successfully.
    Thread-Topic: Migration batch mrtmove has completed successfully.
    Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
    Date: Mon, 9 Jun 2014 10:13:29 +0000
    Message-ID: <[email protected]>
    References: <[email protected]>
    In-Reply-To: <[email protected]>
    Accept-Language: en-US
    Content-Language: en-US
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator:
    x-originating-ip: [192.168.10.2]
    Content-Type: multipart/alternative;
          boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
    MIME-Version: 1.0
    Queue viewer:
    Identity: ogmail\8786\3470333575194
    Subject: testing
    Internet Message ID: <[email protected]>
    From Address: [email protected]
    Status: Active
    Size (KB): 4
    Message Source Name: SMTP:Default OGMAIL
    Source IP: 192.168.10.12
    SCL: -1
    Date Received: 6/23/2014 3:22:49 PM
    Expiration Time: 6/25/2014 3:22:49 PM
    Last Error: 
    Queue ID: ogmail\8786
    Recipients:  [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
    Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
    Md. Ramin Hossain

    What I notice is Queue expired. The message is not going out.
    Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
    This error states that It tried to connect to the target system but failed to connect out.
    Is Exchange 2013 server added in the firewall rule to send communication over port 25?
    Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
    If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
    to add the Mailbox server's IP on the outbound rule for port 25.

Maybe you are looking for