Content available on peripheral without logging in

How safe is safe? When I turn on my MacbookPro but do not login, and turn on my AllShare Samsung TV, I can acces all of my media content using the app TVMOBiLe over Wifi... That should not be possible, should it? That means that although my computer itself is 'secure', my data isn't because it is accesible over air.
I guess there is a solution in the settings, but shouldn't the setting be automatic that it protects data when you're not logged into your computer?

Just because a computer is sitting at it's log-in screen does not mean that the contents of it's file system are not accessible to remote users and systems. As long as the remote user or system has the required credentials, account name and password, it can access everything on that computer that those credentials allow it to access.
As long as you haven't allowed unfettered guest access, in other words, an account name and password is required to do anything, then your computer is fairly safe.
Now I'm not at all familiar with AllShare Samsung TVs or TVMOBiLe or what the configuration is to get this all to work but your assumption is not correct.

Similar Messages

No BI Content available at all...

Dear All,
Our SAP BI 2004s system is set up technically. Now I want to set up some Business Content cubes. But they don´t appear in the AWB Business Content Tab....
Can it be that the technical consultant didn´t install the BC?
You're helpfull reaction will be rewarded and appriciated!
Thanks in advance.

Hi,
Try transporting just those info objects before you transport the cube. See if they reflect in active version in the target system. Then you can transport the cube. Its not a best pratice to send all the objects related to cube (dataflow before/after) in one huge request. Due to the dependencies, the transposrts tend to fail when they dont find the necessary dependent objects in the target
try running RSDG_IOBJ_ACTIVATE program in the target system.
Installing Business Content
Use
Before you are able to work with Business Content objects, you have to convert them from the SAP delivery version (D version) into the active version (A version). For more information, see Business Content (Versions).
SAP recommends that you install Business Content objects in the following cases:
·        After a Content release upgrade
An upgrade to a new Content release usually contains a large number of new and modified Business Content objects. If you want to be able to use the new and modified Business Content, you have to reinstall the Business Content objects. Refer to the Release Notes published with the upgrade. In some cases, SAP will recommend explicitly that you install the A versions of certain objects.
·        After installing a Content Support Package
Refer to the SAP Notes that are delivered with each Content Support Package. These notes contain information on why certain Business Content objects are being redelivered.
Procedure
The following is an overview of the individual steps in the procedure: These steps are subsequently explained in more detail.
       1.      Navigate to the Administrator Workbench to install Business Content (selection of objects, settings for the transfer, starting the transfer).
       2.      Assign relevant source systems.
       3.      Group objects to be included, determine mode of collection for the objects.
       4.      Determine the view of the objects.
       5.       Transfer the objects in Collected Objects.
       6.      Check the settings for the Collected Objects with reference to the Install,Match or Copy and Active Version Available functions.
       7.      Make settings in the selection list and Transfer.
       8.      Correct errors.
1. Navigate to the Administrator Workbench to Install Business Content
In the main menu of the SAP Business Information Warehouse select Modeling ® Administrator Workbench: Business Content. If you are already in the Administrator Workbench, select the Business Content function area by clicking on the corresponding pushbutton in the left-hand navigation window or by choosing the path Goto ® Install Business Content.
The Administrator Workbench for installing Business Content has three navigation windows:
·        In the left-hand window you determine the view of the objects in the middle area of the screen.
·        In the middle window, you select the objects that you want to activate.
·        In the right-hand window, you make the settings for installing the Business Content. The right-hand window also contains an overview of the objects you have selected, and it is here that you start the installation of the Business Content.
You use the Navigation Window On/Off pushbutton on the toolbar in the Administrator Workbench to display or hide the left-hand navigation window. The rest of this section assumes that the left-hand navigation window is displayed.
2. Assign Relevant Source Systems
If you want to assign a source system, select the Source System Assignment function. The Choose Default Source Systems dialog window appears.
Select one or more source systems by setting the corresponding indicators in the Default Assignment column.
Only ever select the source systems that you really need, otherwise you may have to wait unnecessarily when objects are collected.
The assignment of the source system is only relevant for source-system dependent objects (such as transfer rules, file DataSources, and InfoPackages). If more than one source system is available, only those objects assigned to the specified source system are collected ready for the transfer. Objects that have not been assigned to the specified source systems are ignored.
For more information about the special features inherent in activating process chains that can reference to source-system dependent objects, see the Customer Content documentation, under Process Chain and Process Variant.
If you do not select a source system, all the source systems are assigned automatically. You can subsequently change your selection by using the Source System Assignment function.
3. Group Objects To Be Included, Determine Mode of Collection for Objects
Make the settings you require from the following selection lists on the right-hand side of the screen:
·         Grouping
Choose the objects that you want the system to include. The groupings combine the objects from a particular area. You have the following options:
¡        Only Necessary Objects (default setting)
¡        In Data Flow Before
¡        In Data Flow Afterwards
¡        In Data Flow Before and Aftrwds
For more information about groupings, see Collection Object Grouping.
If you change the default setting (Only Necessary Objects), the new setting becomes the default setting for your user.
The grouping selection has an impact on system performance when installing Business Content. For more information, see View of Objects and Object-Specific Recommendations.
·        Collection Mode
Select how you want to collect the objects:
¡        Collect Automatically (default setting): The data is collected directly when the objects are selected.
¡        Start Manual Collection: The data is collected only when you click on the Gather Dependent Objects icon.
Set the collection mode to Start Manual Collection. You can then select all objects without having to wait.
4. Determine View of Objects
In the left-hand navigation window, specify how you want the objects to be displayed. For more information, see View of Objects and Object-Specific Recommendations.
5. Transfer the Objects in Collected Objects
In the central area of the screen, select the objects that you want to install, and use the drag and drop function to transfer them into the right-hand Collected Objects area of the screen.
The Find Object functionenables you to use strings of characters (for example, 0CUST) or wild card searches (for example, 0CUST_*B) to search for objects.
Input help is available for every type of object: Double-click on the Select Objects icon in the tree structure of the corresponding object type to display the Input Help for Metadata screen. Select the required objects. Choose Transfer selection.
You can only use the Business Content DataSources of a source system for transferring data in BW if you have transferred these in their active forms and then copied them into the BW system. For more information, see Implementing Business Content DataSources .
In the Collected Objects area of the screen, the system displays the selected objects and all dependent objects. To reduce the time taken to access the objects when wanting to use them again, the collected objects are stored by default in the Repository Cache.
When you transfer objects into the Collected Objects area of the screen, these objects are also added to the tree structure of the corresponding object type in the central area of the screen and stored for your user. This personal object list can be called up each time the program is restarted.
If you want to remove objects from your personal list, select the objects that you want to remove and choose the Remove Object from Display option from the context menu or click on the icon.
Objects that are listed in several tree structures can only be changed in the place where they first appear. All additional instances of these objects are grayed out so you cannot modify them.
6. Check Settings for Collected Objects
Check the following columns in the Collected Objects area of the screen:
·        Install
The following Business Content objects are highlighted in this column by default:
¡        Objects that are being transferred for the first time. There is not an active version of these objects in the system.
¡        Business Content objects that have been redelivered in a new version. These objects are identified by the Content time stamp in the corresponding object tables.
When setting this indicator check whether the checkbox refers to a folder of an individual object: If the checkbox refers to a folder, the indicator is set for all the objects that belong to this folder. If the checkbox refers to an individual object, the indicator is set for a single object and the indicators for the other objects in the folder are not changed. The same applies when removing this indicator.
In the context menu, the following two options are available for the installation:
                            a.      Install all Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Install.
                            b.      Do Not Install All Below
The Install indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy.
·        Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡        the match indicator is not set and
¡        the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
                            a.      Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
                            b.      Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
The most important properties which are taken into account when versions are matched are now listed.
When referring to InfoObjects it is important to differentiate between:
§         Characteristics
§         Time characteristics
§         Key figures and
§         Units
Valid for All InfoObjects Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        Texts
·        Description
If texts/descriptions in the delivery version do not yet exist in the active version, they are transferred.
·        Attribute only (flag)
·        Short and long text (description)
·        Time dependency of attributes
·        Transfer routine
Valid for Characteristics
Properties Matched Automatically:
Properties Matched Manually:
·        Compounding
New InfoObjects are included in compounding
·        Referenced characteristic
Reference characteristics are transferred automatically. A warning is issued.
·        Attributes / navigation attributes
New attributes are included.
If an attribute is added by the customer, the settings for this attribute are transferred (for example, F4 sequence).
·        Application components
If the entry for the active version is initial, the delivery version is used.
·        BEx display
·        Characteristic constants
·        Default member
·        Authorizations (flag and field)
·        Selection (CHASEL)
·        InfoObject is document attribute
·        Data type
·        Length
·        Output length
·        Conversion routines
·        Lower case allowed (flag)
·        Contains master data (flag)
·        Master data is authorization relevant (flag)
·        Export DataSource (Flag)
·        F4 query design
·        F4 query runtime
·        Check ODS object
·        Contains text tables (flag)
·        Texts are language-dependent (flag)
·        Short, medium and long texts exist (each with flag)
·        Default currency
·        GIS attribute
·        Hierarchies exist (flag)
Valid for Key Figures
Properties Matched Automatically:
Properties Matched Manually:
·        Type of key figure
·        Fixed unit
·        Fixed currency
·        Aggregation
·        Exception aggregation
Valid for Units
Properties Matched Automatically:
Properties Matched Manually:
·        See the table above (Valid for Characteristics), if these properties are also relevant for the units.
When referring to InfoProviders it is important to differentiate between:
¡        MultiProviders
¡        InfoCubes
¡        ODS Objects and
¡        InfoObjects
InfoObjects are discussed above (see the first table Valid for All Objects Named Above).
Valid for All InfoProviders Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoObjects
If InfoObjects in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for MultiProviders
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoProviders
If InfoProviders in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for InfoCubes
Properties Matched Automatically:
Properties Matched Manually:
·        New dimensions
If dimensions in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
With the InfoObject catalog object type, InfoObjects that are assigned to a catalog in the delivery version are transferred to the active version automatically. Manual matching is not necessary.
With the transfer rule object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional attributes) are added automatically when the match is performed. Manual matching is not necessary.
With the process chain object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional objects in the process chain) are added automatically when the match is performed. Manual matching is not necessary.
·        Active Version Available
In this column, the following display options are available:
¡        : The object is available in an active version. You decide whether you want to retain this version or reinstall the latest version of the object.
¡        Date symbol: The object is already available in an active version. However, the active version belongs to an older Content release. SAP recommends that you install the latest version.
¡        Gray symbol: An activated version of the object is available in the system. However, the object status is inactive. If an object version is activated, this indicates that all metadata for the object can be created successfully. The inactive object status indicates that the processed object is inconsistent and cannot currently be used for processing data. Transfer the object again from the SAP delivery version (D version). If this is not enough to change the object status from inactive to active the object has to be postprocessed. You find notes on postprocessing in the activation log.
Postprocessing: An inactive object status may also occur for an InfoObject if changes are made to the structure at field level. Postprocessing the object involves converting the relevant tables in accordance with the activation log.
¡        No indicator: The object is not available in an active version.
7. Make Settings in the Selection List and Install.
Make the required settings in the Install selection list:
Installation Type
Installation Type
Information
Simulate installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in background
The selected objects are installed in the background.
Install and transport
The selected objects are installed immediately and then written to a transport request.
SAP recommends you use the Install in background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete. Make sure that when you install objects in the background that the versions are not matched. It is always the delivery versions that are installed. These are not matched with any available customer versions.
8. Correct Errors
Any errors that occur during the installation of the Business Content are listed in a log. Click on the Log pushbutton to view this log. In the relevant maintenance transaction, repair any errors that occurred during the installation. Install the Business Content again.

How do i share content with my family without becoming responsible for payment of everybody's purchases? with familysharing i mean, not home sharing

how do i share content with my family without becoming responsible for payment of everybody's purchases?
with familysharing i mean, not home sharing
i have set up a familyshare for my parents and 3 siblings, all mid twenties. everybody is used to paying their own way. how do i make that continue to be the case and still keep the sharing facility open?
e.g I don't want to pay for my sisters' music purchases - half of it i don't like - but would like access to it now and then.

-> Home Sharing is different than logging into the iTunes store.
You enable Home Sharing using one AppleID. Doesn't matter which you use but all devices must use the same AppleID for Home Sharing.

An error has occurred. Further information is available in the server log.

I been trying for days to access Secondlife.com but when i do i get this message''An error has occurred. Further information is available in the server log. '' now i can use Chorme and firefox to go to the site but not firefox plus fireofx is searching for second life on my C drive and Customer service for second life said they don't know why Firefox is Searching for Second life on my c-drive.. Can you please help me
Thank you very much

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Why isn't Logic Pro X content available on flash drive?

Why isn't Logic Pro X content available on flash drive?
Running Logic Pro version 10.1.1
Imac 3.1 GHz Intel Core 7
16 GB RAM
Graphics: NVIDIA GeForce GT 750M 1024 MB
Software OS X 10.9.5

If you ask nicely at an Apple Store... and take your Mac with you.... they will download and install LPX for you..... along with all it's content...
As for why they don't offer it on a flash drive?
Who knows.....
It's Apple.... Its the App Store system... Its all about the Apple ID.. it's where things are leading, away from the physical to the non physical medium... and so on..They do things their way.. whether we like it or not... and if you don't like it?
Then choose a different DAW (or move to a different OS via bootcamp) .. It's no skin off their nose... so to speak... but it will cost you more...(in most cases a lot more) for a boxed / non downloadable edition.. For example... Cubase 8 = $550... Live 9 Suite (Boxed) = $800.... Motu DP = $500.. Bitwig = $300... and so on...
$199 for LPX..and all its content... It's a steal, box or no box...
My only issue is.. it would be good to be able to easily download and store a copy of everything myself.. without having to resort to somewhat tricky methods to do so.. so I could easily install everything on a non internet connected Mac...

Remove/Change Proxy Settings Without Logging In

Is there a way to change the proxy settings without logging in?
Our proxy server went down and Spiceworks will not allow pro users to log in because of it. I can't change the settings because I can't login. Does anyone know of a way to change the settings another way?
We can't login on the server or via workstations. This only affects pro users.
This topic first appeared in the Spiceworks Community

HI Norm,
Open System Preferences/Network. Select Airport in the panel in the left then click the Advanced tab then click the Proxies tab. Where you see: Select a protocol to configure Make sure there are NO boxes checked.
Click the Airport tab in that same window. Make sure your network is listed under: Preferred Networks
If not, cick + Type in your network name or click Show Networks and select it from there. Your network should be listed in the Preferred Networks window now. Just below that window select the box next to: Remember networks this computer has joined.
If you still have problems, open Airport Utility (Applications/Utilities)
Select your device on the left then click Continue. In the next window click: I want to restore this AirPort device to its factory settings and then set it up again; then click Continue.
I'm on Comcast without using any Proxies.
You can disconnect the Comcast cable modem from it's power source for about 5 minutes then reconnect. Sometimes you have to recycle the modem.
AirPort troubleshooting guide
Also, on the G5. Go to /Library/Preferences/System Configuration and move these files to the Trash.
com.apple.airport.preferences.plist
com.apple.nat.plist
com.apple.network.identification.plist
You may only see the com.apple.airport.preferences.plist file in that list since it's running 10.5.x
Don't worry about the other .plist files if they are not available.
Carolyn
Message was edited by: Carolyn Samit

I have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code?

i have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code? thank you!

i inherited the website. It’s for a non-profit and is not very
sophisticated, and neither am I in webdesign. It currently has multiple
pages that are identical except for that body section, so whenever i change
the navigation (in the sidebar) I have to update every html page. I want
to have one basic page, and just call in the different body content based
on the link the user selects from the nav bar. How can i do that using a
script? i am using Dreamweaver.
~ in love and light ~
Jeannie
On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

Edu DVD in computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Thanks! For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine. It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do. The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
So, thanks anyway! Pretty cat!
Mona

"I just updated the software on my iphone 4 and prior to updating I could double click and start the camera without logging in, now I can't. How do I fix?

I just updated the software on my iphone 4 and prior to updating I could double click and start the camera without logging in, now I can't. How do I fix?

Nothing to fix...things have changed...slide the camera icon up now..no more double tap.

How can I acess my ipad content from the pc, without enter the security code on ipad? I broke the screen and it doesn´t work. theres a way to enter the code on the pc?

how can I acess my ipad content from the pc, without enter the security code on ipad? I broke the screen and it doesn´t work. theres a way to enter the code on the pc? thank you

No. Get it fix by making an appointment with the Apple genius bar.

I purchased adobe for someone else. How do they download it without logging in to my account?

I purchased adobe for someone else. How do they download it without logging in to my account?

I will assume you mean Acrobat Standard XI.
They can download the trial version of the software thru the page linked below and then use the serial number you purchased for them to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Adobe Acrobat XI Pro/Standard and Reader: Direct Download Links | ProDesignTools

Process KPI extraction from BPM to BW possible? Is there content available?

Hallo
I have a question concerning BPM. Does anybody know if there is standard content and/or an extractor to retrieve BPM Process Data from the CE 7.1? I am looking for something similar as the SAP Workflow extractor and/or data model.
Does someone have a suggestion?
Regards,
mingolo

Hi mingolo,
Didn't you already ask the same question in the following thread?
Process KPI extraction from BPM to BW possible? Is there content available?
I assume that this might be a duplicate and therefore close it.
Best regards,
Martin

BINDUMP of content denied in the SMICM log while connecting to external sys

Hi,
Though this question is related to SAP XI, I feel this question can also be answered by people in ITS, so i am posting this in this forum.
In my current scenario where SAP XI system pushes data to another system(ABC system) using HTTPS connection. I have set up an RFC destination of Type G to connect to the external system.
When i do a Test connection, i see in SMICM log file, i found that connection established, request message written into ABC system.When response is being written i could find BINDUMP of content denied in the SMICM log file. What does that exactly mean..?
Also When i contacted the other party--ABC, they have told that they could not see any messages in their system.
XI shows successfully processed and ABC system did not receive the message... So where did the data go?? I have no clue :-(( Need your inputs in this regard. How to trace if the message has been successfully posted by XI. Below is the SMICM log file.
[Thr 5880] IcmConnConnect: direct connect to www2.ABC.com:443
[Thr 5880] nihsl-getHostAddr: found hostname '.www2.ABC.com' in cache
[Thr 5880] nihsi-getHostAddr: hostname '.www2.ABC.com' = addr 16.256.48.91
[Thr 5880] nihsi-getServNo: servicename '443' = port 01.BB/0443
[Thr 5880] NiCreateHandle: state hdl 23 / socket -1 NI_INITIAL
[Thr 5880] NiIBlockMode: switch off block-mode for hdl 23 / socket -1
[Thr 5880] NiLowLevCon: connect to: host 16.256.48.91, port 01.BB/0443, fam 2 (low adr..high adr)
[Thr 4532] [Thr 4532] NiISelect: fds in write-mask: [Thr 5880] NiIInitSocket: set default settings for socket 65268
[Thr 5880] NiISocket: hdl 23 got socket 65268
[Thr 5880] NiPBlockMode: set socket 65268 to NONBLOCK mode
[Thr 4532]
[Thr 5880] NiPConnect: connect in progress
[Thr 5880] SiPeekPendConn: connection of socket 65268 established
[Thr 5880] NiLowLevCon: took local port 10.1B/4123
[Thr 5880] nilh-localCheck: using local address list
[Thr 5880] NiSetStat: state hdl 23 NI_CONNECTED
[Thr 5880] ->> SapSSLSessionInit(&sssl_hdl=015BC3DC, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 5880] <<- SapSSLSessionInit()==SAP_O_K
[Thr 5880] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 5880] out: sssl_hdl = 19193D20
[Thr 5880] ->> SapSSLSetNiHdl(sssl_hdl=19193D20, ni_hdl=23)
[Thr 5880] IcmPlCheckRetVal: Next status: WRITE_REQUEST(3)
[Thr 5880] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 5880] MPI<12ee>0#7 GetInbuf 5 1489e0 2179 (1) -> 6
[Thr 5880] NiPBlockMode: set socket 65268 to NONBLOCK mode
[Thr 5880] NiPSockGetStatus: socket 65268 ok, no data pending
[Thr 5880] NiPBlockMode: set socket 65268 to BLOCK mode
[Thr 5880] IcmReadFromPartner(id=0/4693): fe-nihdl timeout
[Thr 5880] PlugInHandleServData: role: 2, status: 3, content-length: 0/0
buf_len: 2127, buf_offset: 0, buf_status: 6
[Thr 5880] HttpParseRequestHeader: content length: 1805
[Thr 5880] HttpParseRequestHeader: no transfer-encoding set
[Thr 5880] HttpParseRequestHeader: Version: 1000
[Thr 5880] HttpParseRequestHeader: Keep-Alive: 0
[Thr 5880] IcmPlCheckRetVal: Next status: READ_RESPONSE(2)
[Thr 5880] IcmHandleNetWrite(id=0/4693): HandleServData returned: 2
[Thr 5880] BINDUMP of content denied
[Thr 5880] IcmWriteToConn(id=0/4693): prepared to write data to partner (len = 2127)
[Thr 5880] ->> SapSSLWrite(sssl_hdl=19193D20, buf=061F8A74, len=2127, timeout=2000, &writelen=123EFF24)
[Thr 5880] <<- SapSSLWrite(sssl_hdl=19193D20)==SAP_O_K
[Thr 5880] result = "written= 2127 of 2127 (all)"
[Thr 5880] IcmWriteToConn(id=0/4693): wrote data to partner (len = 2127)
[Thr 5880] MPI<12ee>0#8 FreeInbuf#1 0 1489e0 0 -> 0
[Thr 5880] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 5880] IcmReadFromConn(id=0/4693): request new MPI (0/0)
[Thr 5880] MPI<12ed>1#4 GetOutbuf -1 1489e0 65536 (0) -> 061F8A40 0
[Thr 5880] ->> SapSSLRead(sssl_hdl=19193D20, buf=061F8A74, maxlen=65483, timeout=500, &readlen=123EFEE8)
[Thr 5880] Fri Dec 02 08:59:10 2005
[Thr 5880] <<- SapSSLRead(sssl_hdl=19193D20)==SAP_O_K
[Thr 5880] result = "max=65483, received=8036"
[Thr 5880] IcmReadFromConn(id=0/4693): read 8036 bytes(timeout 500)
[Thr 5880] BINDUMP of content denied
[Thr 5880] PlugInHandleNetData: role: 2, status: 1, content-length: 0/-1
buf_len: 8036, buf_offset: 0, buf_status: 0
[Thr 5880] PlugInHandleNetData: read response header
[Thr 5880] HttpParseResponseHeader: no transfer-encoding set
[Thr 5880] HttpParseResponseHeader: Version: 1000
[Thr 5880] HttpParseResponseHeader: Keep-Alive: 0
[Thr 5880] PlugInHandleNetData: more data to read
[Thr 5880] PlugInHandleNetData: need more data (7936/12484)
[Thr 5880] IcmPlCheckRetVal: Next status: READ_RESPONSE(2)
[Thr 5880] IcmHandleNetRead(id=0/4693): read_len: 8036, HandleNetData returned: 2
[Thr 5880] IcmHandleNetRead(id=0/4693): status 2 -> 2
[Thr 5880] ->> SapSSLReadPending(sssl_hdl=19193D20, &pendlen=123EFF1C)
[Thr 5880] <<- SapSSLReadPending(sssl_hdl=19193D20)==SAP_O_K
[Thr 5880] out: pendlen = 0
[Thr 5880] IcmHandleNetRead(id=0/4693): pending SSL data: 0, rollout=1
[Thr 5880] nihsl-getHostAddr: found hostname 'localhost' in cache
[Thr 5880] nihsi-getHostAddr: hostname 'localhost' = addr 127.0.0.1
[Thr 5880] NiIDgSend: re-connect dgram to: host 127.0.0.1, port FD.E6/64998, fam 2 (low adr..high adr)
[Thr 5880] IcmConnRollOut: connection (id=0/4693) rolled out:
[Thr 5880] CONNECTION (id=0/4693):
used: 1, role: 2, stateful: 0
NI_HDL: 23, protocol: 2
host: www2.ABC.com:443
status: READ_RESPONSE
connect time: 02.12.2005 08:59:08
WP-status: ROLLED IN (Context: 0, Role: 2)
tid: 15, mode: 0, uid: 746, roll-reason: ICM_ROLL_NONE
MPI request: <12ee> MPI response: <12ed>
request_buf_size: 2127 response_buf_size: 65484
request_buf_used: 2127 response_buf_used: 8036
request_buf_offset: 0 response_buf_offset: 0
[Thr 4852] NiBufSelect: Postprocessing...
[Thr 4852] NiBufSelect: returning 1 clients
[Thr 4852] NiSelNext: returning hdl 5, r--, 00000000, rest 0 entries (0164FEF0)
[Thr 5880] IcmWorkerThread: Thread 6: Waiting for event
[Thr 4852] NiIPeek: peek successful for hdl -1 / socket 65588 (r)
[Thr 4852] NiIDgReceive - WAKEUP DGRAM received from:
host 127.0.0.1, port 07.B0/1968, fam 2 (low adr..high adr)
[Thr 4852] NiIPeek: peek for hdl -1 / socket 65588 timed out (r; 0)
[Thr 4852] IcmWatchDogThread: dg received
[Thr 4852] IcmWatchDogUpdateRollQueue(id=0/4693): insert fe-nihdl 23, flags=1
[Thr 4852] NiSelSet: hdl 23, r-, 01679D50
[Thr 4852] IcmWatchDogThread: check ni handles (timeout=10000)
[Thr 4852] NiBufSelect: Preprocessing...
[Thr 4852] NiISelect: timeout 10000 ms
[Thr 4852] NiISelect: maximum fd=65757
[Thr 4852] NiISelect: fds in read-mask: [Thr 4852]
[Thr 4852] NiISelect: fds in write-mask: [Thr 4852]
[Thr 4852] NiBufSelect: Postprocessing...
[Thr 4852] NiBufSelect: returning 1 clients
[Thr 4852] NiSelNext: returning hdl 23, r--, 01679D50, rest 0 entries (0164FF00)
[Thr 4852] IcmWatchDogThread(id=0/4693): nihdl 23 - data received(read)
[Thr 4852] NiSelClear: removed hdl 23 from selectset
[Thr 4852] IcmQueueAppend: Queuelen: 1
[Thr 4852] IcmCreateRequest: Appended request 8369
[Thr 4852] IcmConnRollIn: connection (id=0/4693) rolled back to status: READ_RESPONSE
[Thr 4852] IcmWatchDogThread: check ni handles (timeout=10000)
[Thr 4852] NiBufSelect: Preprocessing...
[Thr 4852] NiISelect: timeout 10000 ms
[Thr 4852] NiISelect: maximum fd=65757
[Thr 4852] NiISelect: fds in read-mask: [Thr 4152] IcmWorkerThread: worker 3 got the semaphore
[Thr 4152] REQUEST:
Type: READ_RESPONSE Index = 8368
[Thr 4152] CONNECTION (id=0/4693):
used: 1, role: 2, stateful: 0
NI_HDL: 23, protocol: 2
host: www2.ABC.com:443
status: READ_RESPONSE
connect time: 02.12.2005 08:59:08
WP-status: ROLLED IN (Context: 0, Role: 2)
tid: 15, mode: 0, uid: 746, roll-reason: ICM_ROLL_NONE
MPI request: <12ee> MPI response: <12ed>
request_buf_size: 2127 response_buf_size: 65484
request_buf_used: 2127 response_buf_used: 8036
request_buf_offset: 0 response_buf_offset: 0
[Thr 4152] ->> SapSSLRead(sssl_hdl=19193D20, buf=061FA9D8, maxlen=57447, timeout=500, &readlen=10BEFEE8)
[Thr 4852]
[Thr 4852] NiISelect: fds in write-mask: [Thr 4852]
[Thr 4152] <<- SapSSLRead(sssl_hdl=19193D20)==SAP_O_K
[Thr 4152] result = "max=57447, received=4548"
[Thr 4152] IcmReadFromConn(id=0/4693): read 12584 bytes(timeout 500)
[Thr 4152] BINDUMP of content denied
[Thr 4152] PlugInHandleNetData: role: 2, status: 2, content-length: 7936/12484
buf_len: 12584, buf_offset: 8036, buf_status: 0
[Thr 4152] PlugInHandleNetData: read response body (len=12484/12484)
[Thr 4152] PlugInHandleNetData: response completely read(EOS=0)
[Thr 4152] IcmFlushBuf: Flushing 12584 Bytes, buf_status: 6
[Thr 4152] flush buffer with mpi buffer id 1
[Thr 4152] MPI<12ed>1#5 FlushOutbuf l1 1 1 1489e0 12636 6 -> 061F8A20 0
[Thr 4152] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 4152] PlugInHandleNetData: close connection
[Thr 4152] IcmPlCheckRetVal: Plugin retval: PLUGIN_RET_CLOSE (-702)
[Thr 4152] IcmHandleNetRead(id=0/4693): read_len: 4548, HandleNetData returned: -702
[Thr 4152] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 4152] PlugInStopConn: role: 2, error: 0, write_err: 1
[Thr 4152] ->> SapSSLSessionDone(&sssl_hdl=015BC3DC)
[Thr 4152] <<- SapSSLSessionDone(sssl_hdl=19193D20)==SAP_O_K
[Thr 4152] NiICloseHandle: shutdown and close hdl 23 / socket 65268
[Thr 4152] IcmConnClose: Connection 0/4693 closed
[Thr 4152] IcmConnFreeContext: context 0 released
[Thr 4152] IcmServDecrRefCount: intersrv.afdb.local:443 - serv_ref_count: 1
[Thr 4152] IcmWorkerThread: Thread 3: Waiting for event
Cheers,
Siva Maranani

Hi,
My problem is solved.
I was not able to see the message in external system b'cos the XML document being posted to external server was an incorrect one. When we changed the payload and tested the scenario, its woking fine.
It did not have anything related to BINDUMP. BINDUMP error still exists even after successful post into external system.
Regards,
Siva Maranani

How to make business content available for reporting

The business content is loaded.The version is 3.5.3 SP2 which we have and BW version is 3.5
I can see the business content going thru RSA1 for e.g for Sales 0SD_O01 etc
Now how can i make the content available for reporting.When I go in modeling and click on infoprovider, infoobject it doesnt show me anything.Its blank.
Do i have to connect R/3 to BW for reporting or load data to BW from R/3 and do reporting.Why the content is not showing in modeling?How can i make it available for reporting

Hi,
First you need to install the Businesscontent object first...right side window in the business content will give you the option.once it is installed then u can view it in modeling then load data and do reporting...
If you need any details..feel free to post..If u satisfied upto some level..exibhit it by awarding points..

Exceptions thrown when news items are viewed without logging into Personalisation server

Hi all
I am currently getting some exceptins thrown each time I view any news items without
logging into personalisation server.
It is a warning but exceptions are being thrown
Here are the errors in the attached file
Any help would be appreciated
Bola
[errors.txt]

Bola,
This is a benign warning message, but indeed a bug. It is currently being tracked
as CR059395 internally. It did not make it into the upcoming 3.5 sp2. If this
problem is causing you trouble, you may wish to request a patch through your Support
channel.
Cheers,
PJL
"Bola Taylor" <[email protected]> wrote:
>
>
>
Hi all
I am currently getting some exceptins thrown each time I view any news
items without
logging into personalisation server.
It is a warning but exceptions are being thrown
Here are the errors in the attached file
Any help would be appreciated
Bola

Content available on peripheral without logging in

Similar Messages

Maybe you are looking for