Process KPI extraction from BPM to BW possible? Is there content available?

Hallo
I have a question concerning BPM. Does anybody know if there is standard content and/or an extractor to retrieve BPM Process Data from the CE 7.1? I am looking for something similar as the SAP Workflow extractor and/or data model.
Does someone have a suggestion?
Regards,
mingolo

Hi mingolo,
Didn't you already ask the same question in the following thread?
Process KPI extraction from BPM to BW possible? Is there content available?
I assume that this might be a duplicate and therefore close it.
Best regards,
Martin

Similar Messages

Data Transfer Process - Full Extract from DSO

We running BI7 and have got a DSO with characteristics and key figures that we want to use as a source for a full data load into a target.
When we run the DTP the extract process generates SQL:
SELECT characteristic_1, characteristic_2,.......,SUM(key_figure_1),SUM(key_figure_2).....
FROM dso_name
GROUP BY characteristic_1, characteristic_2
This is OK when the data volumes are low but our DSO has over 120 million records and this SQL results in an Oracle error after running for over 12 hours.
In the 3.x world with update rules and infopackages the generated SQL is:
SELECT characteristic_1, characteristic_2,.......,key_figure_1,key_figure_2.....
FROM dso_name
With this there is no group by and so the data is extracted immediately (no long Oracle processing for the GROUP BY).
My question is:
Is there anyway of stopping the GROUP BY in the BI7 world, i.e. just a simple select statement without any functions on the key figures?
Regards
Terry

This is the SQL generated without the semantic key (I have removed a lot of the characteristics and functions on key figures) :
SELECT
"O1"."DOC_NUMBER" ,"O1"."S_ORD_ITEM" ,"O1"."SCHED_LINE" ,
"O1"."CREATEDON" ,"O1"."SALES_UNIT" , "O1"."DEL_BLOCK" ,
"O1"."DISTR_CHAN" ,"O1"."DIVISION" , "O1"."DOC_TYPE" ,
"O1"."RECORDMODE" ,"O1"."MATERIAL"
SUM ( "O1"."CONF_QTY" ) AS "CONF_QTY" ,
SUM ( "O1"."DLV_QTY" ) AS "DLV_QTY" ,
SUM ( "O1"."ORDER_QTY" ) AS "ORDER_QTY" ,
FROM
"/BIC/AESSDO11600" "O1"
WHERE
( ( ( ( "O1"."S_ORD_ITEM" <> '000000' ) ) ) )
GROUP BY
"O1"."DOC_NUMBER" ,"O1"."S_ORD_ITEM" ,"O1"."SCHED_LINE" ,
"O1"."CREATEDON" ,"O1"."SALES_UNIT" , "O1"."DEL_BLOCK" ,
"O1"."DISTR_CHAN" ,"O1"."DIVISION" , "O1"."DOC_TYPE" ,
"O1"."RECORDMODE" ,"O1"."MATERIAL"
and this is it with the semantic key:
SELECT
"O1"."DOC_NUMBER" ,"O1"."S_ORD_ITEM" ,"O1"."SCHED_LINE" ,
"O1"."CREATEDON" ,"O1"."SALES_UNIT" , "O1"."DEL_BLOCK" ,
"O1"."DISTR_CHAN" ,"O1"."DIVISION" , "O1"."DOC_TYPE" ,
"O1"."RECORDMODE" ,"O1"."MATERIAL"
SUM ( "O1"."CONF_QTY" ) AS "CONF_QTY" ,
SUM ( "O1"."DLV_QTY" ) AS "DLV_QTY" ,
SUM ( "O1"."ORDER_QTY" ) AS "ORDER_QTY" ,
FROM
"/BIC/AESSDO11600" "O1"
WHERE
( ( ( ( "O1"."S_ORD_ITEM" <> '000000' ) ) ) )
GROUP BY
"O1"."DOC_NUMBER" ,"O1"."S_ORD_ITEM" ,"O1"."SCHED_LINE" ,
"O1"."CREATEDON" ,"O1"."SALES_UNIT" , "O1"."DEL_BLOCK" ,
"O1"."DISTR_CHAN" ,"O1"."DIVISION" , "O1"."DOC_TYPE" ,
"O1"."RECORDMODE" ,"O1"."MATERIAL"
ORDER BY
"DOC_NUMBER" , "S_ORD_ITEM" ,
"SCHED_LINE"
As you can see, all the the semantic key(the key of the DSO) does is add an order by.
Regards
Terry

Invoking methods extracted from a string?!?

Hi everybody. I hope the subject is not confusing. What I'm really looking for is some Perl-like behaviour in Java. In Perl its possible to execute subroutines (basicly methods) extracted from a string ("&sub()"). Is there anything similar in Java?
What I would like to do is to process a string and if it has a method (object.getTime()), the method will be called and the return value stored in its place.
Please let me know if more explanation is needed.
Thanks in advance for all the help!
Leo.

I use a language called MUMPS where you can do that as well - execute strings as commands etc. I don't know much about Reflection but it looks like you can get method (Objects) from strings and execute them as well ...

Calling ADF page Custom Listener (Ex: ActionListener) from BPM Process Task (APPROVE/REJECT)

Hi All,
Jdeveloper version - 11.1.1.7
I am very new to BPM / SOA development, but I have very good development skills on ADF.
I am not using ADF BC, using EJB for business services and also using custom ADF pages for HumanTasks.
Usecase:
From the BPM Process task, when process submission (APPROVE / REJECT) , I need to invoke a Custom listener (Ex.Action Listener - a EJB call) in the ADF page.
I am trying to use BPM APIs.
Please clarify me how this will achieve using BPM APIs. I need detail guidelines to do it. Please make to understand this process.
Provide some useful documentation or links to understand the following:
1. Custom Human task pages
2. BPM APIs - 11.1.1.7
3. Call a BPM process task from ADF Listener and Call a ADF Listener from BPM Process task - Using BPM APIs.
Please revert more clarifications needed.
Thanks and Regards
Mohanraj N

Hi Joonas.
Plese let me explain me better for your understanding
A big summary for what I meant it's the following:
1- In the procces you made, when you add the HT activity, you have to implement it, this means declare the input(s) parameters you want. This implementation create the .task file.
2- Create an application, and projects as HT you have. Each poject are based on the .task file, and automatically create a Data Control (for each project based on a .task) with all you need.
This w'll be an empty application, so you can customize it all you want. The task selected should have all the parameters previously defined. Those parameters can change if you want.
2- Create a page(s) in the task flow for the task implementation. You can even split the the payload of the task in differents pages, create your custom pages and any logic you need.
3- An important aspect is how to match these application with the HT implemented in the process. It's possible, it's a configuration en the Enterprise Manager.
4- Deploy your application
All these are explain in the book I mentioned
Th book you can find it here:
https://blogs.oracle.com/soacommunity/entry/oracle_soa_suite_11g_handbook_1
Regards Dariel.
PS: Please, let me know if you need more details.

How to access/invoke Web Service from BPM Process

The following steps required to attach and invoke web service method from process:
1) Add a module in the catalog for ex WebServiceMO
2) Add WebService Catalog component demoWebService in WebServiceMO
3) Put ur WSDL address in WSDL address field like "http://localhost:8080/test/test?wsdl"
4) Click next to introspect the web service it will import required files and setting from the url to your project
5) Now for invoking webservice just call the method for ex.
@return as String[]
getTestStringList(TestInterfaceService, out @return : @return)
logMessage "web service calll result >>"+length(@return)+">>>"+@return[0]
Here @ return is the return from webservice call.
this way u can access web service from BPM process.
Edited by: Anurag Yadav on Jul 17, 2009 2:19 PM

I have a web service which does not return any value but when I introspect the web service, I have an out parameter to it.. Not sure why?
For e.g.
TestServiceListener.addTestNotes(TestNotes : testNotes, out TestNoteResponse : testNoteResponse);
So here I see an out parameter, but my web-service has no out parameter...
Any idea why is this happening?

** Is it possible to call a Proxy from BPM ?

Hi friends,
Our requirment is to take the thru JDBC (data required to create Sales Order) and call the Standarad BAPI 'BAPI_SALESORDER_CREATEFROMDAT2'. Since BAPI is not able to handle multiple sales order, we want to use this BAPI in inbound proxy and want to call from BPM.
Since we want to call continuous BAPIs one by one, (Sales Order, Delivery, Invoice) we want to design this scenario using BPM.
I understand that we are not able to create proxy for Abstract Interfaces. BPM only understands abstract interface. In this case, how do we call proxy from BPM? Is there any other possibility?
Kindly reply friends.
Kind Regards,
Jegatheeswaran P.

hey,
yeah its possible..
Check this.
/people/vanita.thareja2/blog/2006/05/23/bpm-sending-message-asynchronously-and-getting-the-response-from-synchronous-system-using-abap-proxies
These replies too..
Proxy in BPM
BPM file to ABAP proxy
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 5:32 AM

Process to Extract the data from R/3 to MDM .

Hi
Can any one Explain the process of how the data is Extracted from the R/3 to MDM.
If any doc plz mail me to [email protected]
Thanking you in Advance.
Hari.

Hi,
To extract data from R/3 to MDM you would need to first set up a port to XI (if it is your integrator) and then establish an FTP to the MDM server.
R/3 has lookup data/check table data that can be extracted to MDM to do this you could run standard code provided by SAP extract the lookup data as an xml file & upload this data using hte standard maps in to the MDM repository
If you have any custom tables in R/3 you could extract that data using MDMGX transaction code .
Finally for the actual master data you could set up extraction variants using MDM_CLNT_EXTR and schedule jobs to run them/ MDMC to extract records.
Please find the IT Scenario config guide & other relevant documents at:
https://websmp204.sap-ag.de/nw04operation
Regards,
Anita

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Error while extraction from R3 : URGENT

While extracting from R/3 generic datasource(extracted through function module ) i am getting error as :
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
But when I am running the FM or the extractor checker it is giving actual records with our any error
Could you please help me what to do ?
No job log in job overview , only it is given Cancelled.

Some possibilities:
1. Replicate the data source and then try loading.
2. Check the RFC connection ; may be it is broken.
3. Check the update rules to see it is active.
Ravi Thothadri

Do not Extract from PSA but Access Data Source (for Small Amounts of Data)

Hi Experts,
In the DTP, the above option is available for Full Loads for certain extractors but not for others, particularly, certain HR extractors?
Is there a way to make it available for HR extractors? Is there a setting that needs to be updated in ECC or in BI?
Thank you for your help!

Hi,
There is no special setting for this, Please see the detail description:
Data is not extracted from the PSA for the DataSource; it is requested from the data source directly at DTP runtime.
Use
You use this mode for small data sets and full uploads, for example, small sets of master data. With file source systems, note that the file has to be available on the application server.
Dependencies
You do not have to create an InfoPackage in order to extract data from the source.
Data in the data source is accessed in "direct access mode". This has certain consequences, especially if you are extracting data from SAPI systems:
Data is extracted synchronously. This places a particular demand on the main memory, especially in remote systems.
The SAPI extractors may respond differently than during asynchronous load since they receive information by direct access.
SAPI customer enhancements are not processed. Fields that have been added using the append technology of the DataSource remain empty. The exits RSAP0001, exit_saplrsap_001, exit_saplrsap_002, exit_saplrsap_004 do not run.
If errors occur during processing in BI, you have to extract the data again since the PSA is not available as a buffer. This means that deltas are not possible.
In the DTP, the filter only contains fields that the DataSource allows as selection fields. With an intermediary PSA, you can filter in the DTP by any field.
Regards,
Kams

Alerts from BPM Email Subject and From address should be changed.

Hi All,
I'm raising an alert from BPM by using Container operation and Control steps.
The below details are appearing in the Email. Is there any way to change these standard steps... ?
From:     WF-BATCH at K.local
To:         SAPSupport at k.com
Subject: Process 000000021589
Alert ID:   ##00010##
I want to change the
- Subject name with my own subject line.
- From address should be changed to it.helpdesk at k.com instead of WF-BATCH at k.com
- I checked in some of the threads, looks like there is limitation in terms of characters in the Email body(127 characters)? Is there anything I can do to extend the email body?
Kindly suggest me.
Thanks
Deepthi

Hi Baskar,
// You can pretty much change the subject title and recipient information easily. Click on fixed recipients to modify mail address.
Recipients list is fine. I can change. How about the Sender Email address?
Ex: WF-BATCH.. Since the errors are generated from BPM, the sender userid will be always WF-BATCH.
I want to change this user id into my custom user id.. is it possible?
2. Also I enabled Dynamic Text in alert category which is used to get the dynamic text from mapping.. Hence i cannot use Short and Long texts tab in Alert Category to generate the subject line.
Hence Subject line is coming with process ID, looks like I cannot change?
Thanks

Error while calling ejb service call from BPM service

Hi,
We are using the Oracle 11.1.1.5.0
We are calling ejb service call from BPM service to update the data to Oracle database.
We are getting the below error when we executing the ejb service call from BPM Service.
<Error> <EJB> <BEA-010026> <Exception occurred du
ring commit of transaction Name=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliver
yBean.handleCallback(java.lang.String,java.lang.String,java.lang.String,int,bool
ean)],Xid=BEA1-45B91984D57960994897(30845116),Status=Rolled back. [Reason=javax.
transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a p
articipant in two-phase commit. To force this participation, set the GlobalTrans
actionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhas
eCommit for the Data Source = EBSConnection],numRepliesOwedMe=0,numRepliesOwedOt
hers=0,seconds since begin=1,seconds left=60,XAServerResourceInfo[SOADataSource_
base_domain]=(ServerResourceInfo[SOADataSource_base_domain]=(state=rolledback,as
signed=soa_server1),xar=SOADataSource,re-Registered = false),XAServerResourceInf
o[ArCnTaskForms@EBSConnection@EBSConnection_base_domain]=(ServerResourceInfo[ArC
nTaskForms@EBSConnection@EBSConnection_base_domain]=(state=rolledback,assigned=s
oa_server1),xar=weblogic.jdbc.wrapper.JTSEmulateXAResourceImpl@fa5476,re-Registe
red = false),SCInfo[base_domain+soa_server1]=(state=rolledback),properties=({web
logic.jdbc.remote.EBSConnection=t3://192.168.10.114:8001, weblogic.transaction.n
ame=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean.handleCallback(java.la
ng.String,java.lang.String,java.lang.String,int,boolean)]}),local properties=({w
eblogic.jdbc.jta.SOADataSource=[ No XAConnection is attached to this TxInfo ]}),
OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=soa
server1+192.168.10.114:8001+basedomain+t3+, XAResources={eis/tibjms/Queue, eis
/activemq/Queue, WLStore_base_domain_BPMJMSFileStore, WLStore_base_domain__WLS_s
oa_server1, eis/fioranomq/Topic, eis/jbossmq/Queue, eis/Apps/Apps, eis/websphere
mq/Queue, eis/AQ/aqSample, WLStore_base_domain_SOAJMSFileStore, eis/aqjms/Queue,
WSATGatewayRM_soa_server1_base_domain, eis/sunmq/Queue, eis/pramati/Queue, SSCo
nnectionDS_base_domain, eis/tibjms/Topic, eis/tibjmsDirect/Queue, eis/wls/Queue,
eis/tibjmsDirect/Topic, EDNDataSource_base_domain, eis/wls/Topic, eis/aqjms/Top
ic, RL3TST_base_domain, ArCnTaskForms@EBSConnection@EBSConnection_base_domain, S
OADataSource_base_domain, WLStore_base_domain_UMSJMSFileStore_auto_2},NonXAResou
rces={})],CoordinatorURL=soa_server1+192.168.10.114:8001+base_domain+t3+): weblo
gic.transaction.RollbackException: Could not prepare resource 'ArCnTaskForms@EBS
Connection@EBSConnection_base_domain
JDBC driver does not support XA, hence cannot be a participant in two-phase comm
it. To force this participation, set the GlobalTransactionsProtocol attribute to
LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source
= EBSConnection
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(
TransactionImpl.java:1881)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:345)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:239)
at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocal
Object.java:622)
at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetr
y(BaseLocalObject.java:455)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
ionLocalMethodInvoker.java:52)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDelivery
LocalBeanImpl.handleCallback(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMes
sageHandler.handle(CallbackDeliveryMessageHandler.java:47)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:140)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: javax.transaction.xa.XAException: JDBC driver does not support XA, he
nce cannot be a participant in two-phase commit. To force this participation, se
t the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended)
or EmulateTwoPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
.>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <failed to handle message
javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot
be a participant in two-phase commit. To force this participation, set the Globa
lTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateT
woPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:207)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
>
Could any body help on this issue.It is little bit urgent for us to resolve.
Thanks in advance.

Thanks Sudipto Desmukh,
The link is helpful me to resolve this issue.
Thanks,
Narasimha E

Error occured during extraction from APO to BI 7.0

Hi Experts,
I am in the process of extracting data from SCM(APO-Demand Planning) to BI .I have selected the relevant planning area 9ADP01 and given Generate Export DS in APO system and replicated the same in BI.But before scheduling the InfoPackage,when i checked for the DS 9A0APO_DP_ORDERANALYTICS_1,it displays "Error occured during extraction".I do have a doubt whether I should activate the DS in RSA5 before replication (but am not able to find the DS under DP in RSA5)
I have checked the forums but solutions mentioned did not resolve my issue.
Thanks,
Meera

Hi,
The issue is resolved...
Regards,
Meera

Error while extracting from BI source

Hi,
We are facing a wierd problem:
Scenario:
Loading data from one DSO to another DSO with the help of transformation
The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
Error:
Data package processing terminated
Error while extracting from source EPUD0002 (type InfoProvider)
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Unknown error in SQL interface
Error reading the data of InfoProvider EPUD0002
Exception CX_RS_STEP_FAILED logged
Workaround:
We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
FYI...Our transformation has lots of abap coding ...
Addn Info:
SAP_BW 700 0010
BI_CONT 703 0005
SAP_BASIS 700 0010
Any help will be highly appreciated...
- Amit

There must be some bug in the code which is causing this issue.
try to debug it,
refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
/people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

Master data extraction from SAP ECC

Hi All,
I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.

Hi All,
i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
Please find the screenshots.
I did an Environment -->Check connection and found the below,

Process KPI extraction from BPM to BW possible? Is there content available?

Similar Messages

Maybe you are looking for