Content based receiver detrmination

Hi All,
We are having an requirement in my project where the users whats reset their passwords . Here we are using an web service where user needs to send the system id ( DEV, QUAL,PRD etc) , user id , password . Depends on the content (DEV,QUAL,PRD) we need to route the request to that particular system in the SAP trough XI. once the password is changed we need to send the response to the SOAP( web service).
I tried to use the link
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
But for the above link it is not supporting for synchronous. Please advice me how to preform this scenario.
Regards,
Rama K Balusu

You have to do the following change to make the scenario synchronous
Create the sender and reciever interface synchronous mode. (ESR)
Quality of Service Best Effort for the soap channel(ID)

Similar Messages

Content based receiver determination with Seeburger AS2 adapter

We are planning to use the Seeburger AS2 adapter on our XI 3.0 installation to post custom XML documents to XI from external business partners. The problem we have is to do the receiver and interface determination based on the xml message type that is submitted. How can we identify what is the name of the root xml node (which is representing the message type that was submitted to us) during the receiver determination and specify conditions for the receiver determination based on this? We can not use the Seeburger Classifier module here as this is only determining the mapping name to be used for an EDI conversion but can not handle any type of XML message.

Rudy,
I think the easiest way would still be the ReceiverDetermination and creating an XSD that contains the main important TAGs from the different messages.
That should allow you to test for the existing of certain important TAGs or check the value of some TAGS.
I don´t know about aedaptive-adapters, but I don´t think that they are Drummond-Certified. Check out...
http://www.drummondgroup.com/html-v2/as2-companies.html
Without this certification, a lot of your partners might not allow you to use this adapter if you wanna make AS2 with them.
Greetings
Stefan

Content based routing in receiver determination.

hi,
how to do content based routing in receiver determination based on value of of a variable of target structure?
Miten.

ths is what you are looking for
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers

Receive file content based on file Id/fileName

Hi,
I want to configure a scenario in XI that I can call via HTTP, pass the filename and receive the file conetnt of XML document.
Suppose I had created two structres, 1st is fileID, and 2nd is FileContent.
If i send the FileID/Filename, I should get File content based on FileId/Filename as output.
If I am doing HTTP to RFC, for BAPI-Company getdetail, I can fetch the data, based on the company ID, and can get company details as result,
I am doing Http to file, Now how shd i proceed with my case.
I send fileid/filename as input parameter, i shd get filecontent as output
Regards,
varun

Hi Varun,
i don't know how to do it in .Net
But procedure must be the same as that of java.
in java to develope web service we create a standalone EJB and expose it as a web service.
you will have a variable that will contain the path of the file.
then as return type take a variable of string type that will return the content of file.
Down load the WSDL of your webservice from WebserviceNevigator of your WAS,
Import it as a external defination in XI
Do the Required Mapping.
Thanks
Sunil Singh

Sender SMTP Adapter / Content Based Routing / Mapping of an attachement

Hi all,
I'm still working on my SMTP --> PI --> Proxy scenario (asynchronous). I've tried several different properties of my sender communication channel (type = mail), but I didn't find the correct configuration. Hopefully it exists.
I'm working with PI 7.0 SP10.
I get an inbound message via Mail using sender SOAP Adapter. The message payload itself is an attachement. Now I'd like to do the following:
a) Content Based Routing in Receiver Determination based on the message subject
b) Mapping of the Attachement XML message to my inbound proxy interface
Now, trying to do so, I didn't get it work. When I use XIPAYLOAD with keep attachements, I get two attachements in my inbound message (one in XI mail package format having the subject within, one with the IDoc structure I'd like to map). How can I assign the second attachement to be used for my message mapping?
When I use XIALL instead of XIPAYLOAD, I think the mapping will work but my subject for content based routing will be lost, right? That one I didn't get running because of another failure, so I don't know the exact behaviour of the adapter for that configuration.
Anybody out there who know the correct configuration for the sender mail adapter for my small scenario above?
BR
Holger

Hi Stefan,
sorry for misunderstanding, for sure I'm using the mail adapter, not the SOAP Adapter. I'm actually on the same direction. I'm using XIPAYLOAD as message protocoll (having the attachement as the content for the mapping --> correct). Furthermore I've also found the predefined context objects for the content based routing receiver determination.
What I missed was setting the following properties in the communication channel:
To store adapter attributes in the message header of the XI message, set the Set Adapter-Specific Message Attributes indicator.
The following attributes are added to the XI message header if the sender makes them available, and if the Variable Transport Binding indicator is set.
Now it's working
BR
Holger

Content Based Correlation in Oracle 11g

Dear Veterans!!!
I am working on the following use-case.
An order processor accepts order(Mode-Buy/Sell, Price, Quantity) on webservice from various customers, and presents them to DecisionService, after adding the order Id to it. The decision service would check if the price*quantity > 1000, if so the response is sent as (Order ID, OrderStatus="Fail") else, sends (Order ID, OrderStatus="Success").
What I want to do?
Now I need to create Order Processor using single JMS Adapter with Interaction type "Asynchronous Request/Reply" using content based.
What I have been able to do?
I have been able to do content-based Correlation between Decision Service BPEL and Order Processor BPEL, where Order Processor has two JMS Adapters, One Producer which enqueues the order for Decision Service, setting the orderId as correlation. The another JMS Adapter is set as Consumer and recieve activity is registered with it and picks up the response after correlating the message.
Also I have been able to do the "native correlation" scenario, using Decision Service as mediation module.
What is the problem?
1. I need to have the decision service as BPEL, and be able to do the native correlation, which I wonder how to do, because the Jdeveloper 11g has removed support for Adapter Header variables.
2. I need to use decision service as BPEL and be able to do the content-based correlation, using a single Asyncronous Request/Reply JMS Adapter instead of two (Producer and consumer).
Any Pointers shall be useful.
Many Thanks,
Regards,
SwapSawe.
I am aware of how to set the correlation
http://swapnil-soa.blogspot.com/2008/01/correlation-this-post-would-effort-to.html
And how to do it in Oracle 11g
http://biemond.blogspot.com/2009/10/jms-request-reply-interaction-pattern.html
Edited by: SwapSawe on Nov 30, 2009 11:01 PM

Dear Friends,
If I was not able to make my point clear, I would explain it again. I am posting message from one BPEL process to an Asynchronous Request/Reply JMS Adapter.
A consumer JMS Adapter, would read the message from Q and would initiate another BPEL process, which would perform some business logic to generate a response and post it to reply queue via JMS Producer.
Now the reply posted, is picked up by the Async Request/Reply, but the receive activity is unable to correlate the message.
I was able to do this scenario using native correlation, i.e. JMS Message Id mapped to JMS Correlation Id, through mediation module. But I am looking forward to do this using content based correlation.
Regards,
SwapSawe

Content based Routing?

Hi Forum,
I've looked through the messages regarding content based routing or similar's but the answers did not satisfy my needs. I have an XSLT mapping from a flat file structure to an IDOC. To qualify the receiving system I have to do a database lookup in my XSLT mapping by a Java extension function with combining some of the inputfields. The result of this database lookup is the Receiver System. How can I use this result in the condition Editor for the receiver determination. I can only use here the Nodes from the inputmessage. Are there other ways to have access to a "global Container" where I can store the results from the databaselookup to use them here?
Thanks for you patience
Manfred Schmidt-Voigt

Hi,
If the outbound adapter is a j2ee adapter, you can write a module which performs the lookup in a database or what ever. Then alter the message and add the information looked up.
The easy way would be to add an extra attribute on the root node and add the content of the lookup in this field.
I whould though prefere to use add the information to my root node.
If you are not that keen on adapter development, the send the message into a bpm where you perform a lookup. This could probably be performed useing one of SP13's lookup functions. The BPM should only consist of a recieve and a send step. When sending the message you should be able to perform the routing.
/daniel

Content based routing in PI 7.1?

Hi Guys,
For the normal content based routing in PI 7.1 in the receiver determination step once i select the conditin and in the condition editor to choose the filed, i dont see any interface under the xpath.
I dont have any search help option in the xpath column
any help or suggestions would be appreciated
Thanks,
Raj

Hi Raj,
Try the steps which I am giving below, although it's a workaround and don't know the exact reason why it is failing.
1. Open your Outbound Message Interface (which you are using in your Receiver Determination) in IR, edit it and change the Interface pattern (which is there just below the category "Outbound") to "Stateless (XI30 - Compatible)" , save it activate it.
2. Follow the same step for your Inbound Message Interface. Change the Interface Pattern from "Sateless" to "Stateless (XI30 - Compatible)" .
3. Go to ID. Remove your Outbound and Inbound Message Interface from their respective Business Service/Comp and add it again.
4. Create your your receiver determination again using the Outbound and Inbound MI you have changed.
5. Open condition editor of your receiver determination.You should be able to see your Message Interface and can choose the XPath.
Follow the above steps carefully. It took me an hour to find this workaround. Let me know if it works.
Thanks
Amit

Split messages while using content based routing

Hi gurus,
We are using content base routing by checking the value of field F1 in our scenario. If the value is V1, then route to system A; If the value is V2, then route to system B.
There are two layer in the send message type: layer1 and layer2. Both layer1 and layer2 can occur many times.
As you know, The field maybe existed many times in the real messages. Sometimes with the value V1, sometimes with the value V2.
If F1 is in the layer1, can we split into two messages by judging the value of F1?
If F1 is in the layer2, can we split into two messages by judging the value of F1?
Thanks in advance.

Hi Grzegorz,
Thanks for your reply.
Actually my case is as follows:
(send messge)
               <DATA>
                    <F1>V1</F1>
               </DATA>
               <DATA>
                    <F1>V2</F1>
               </DATA>
               <DATA>
                    <F1>V1</F1>
               </DATA>
Then in system A, we should receive( suppose no mapping):
               <DATA>
                    <F1>V1</F1>
               </DATA>
               <DATA>
                    <F1>V1</F1>
               </DATA>
While in system B, we should recieve:
               <DATA>
                    <F1>V2</F1>
               </DATA>
If we only use content based routing, both A and B will receive all 3 DATA.
Any ideas? Thanks in advance.

Where do you perform Content based Routing?

Where do you perform Content based Routing?
Edited by: I AM NEW TO XI on Jan 8, 2009 5:11 PM

Hello,
Although jayson has answered, just to help you more, in the receiver determination in ID, you will see conditional routing, there if you click, you will see your source message structure, you can select a perticular field and set conditions and the corresponding reciever if those conditions are met.
Hope this helps.
Thanks
-Kulwant
Award score if useful

Content based Routing Vs Message based Routing

Hi friends,
Can u plz differentiale Content based Routing and Message based Routing?

Hi,
Content based routing is when the receiver is determined based upon some value in message i.e for a field 'a' receiver is A but if its 'b' receiver is B.this is determined at runtime.
While message based is normal routing
Regards,

Content Based Queue Routing

Is it possible to have a message routed to a particular queue based on some identifier within the content of the message?
I have a situation where a certain message needs to take priority over other messages and the only distinguishing characteristic for this message will be embedded in the actual message. So, I would like to have a dedicated queue or pool of queues for this high priority message, ensuring quick processing.
Any help is appreciated.

Hi,
There is no content based Queue routing in Receiver side. However, you can achieve, prioritized message processing by ensuring, high priority messages are processed first by registering queues with priority messages.
For more on this:http://help.sap.com/saphelp_nw70/helpdata/en/04/827440c36ed562e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Hope you are looking for this one.
Rgds

Swapping attachment to content on Receiver Mail Adapter

Hi Experts,
Can I move my attachment data to content on receiver mail adapter ? I am not using Mail package or mapping. I tried using Payloadswapbean on receiver adapter but adapter generated email with attachment only with and without Payload swap bean module.
Please let me know if it is possible without using Mail Package.
Thanks,
Ankit

Hi there,
If you want to use attachment in content, then you need to collect the entire mail content in BPM. From there you can use Payloadswap bean on receiver adapter.
The reason behind using BPM is that the attachment is maintained only in Integration Directory. First the mapping converts the source into mail and then just before moving to receiver the attachment gets added to the mail(i.e. after mapping). So if a BPM is used then all the mail content with attachment will get transported to BPM first and then to the receiver with the above change (Payloadswap bean i.e transferring the attachment to content).
Best Regards,
Souvik

ABAP stack configuration for content based message search in PI 7.

Hi experts,
I am trying to eanble Content based message search in PI7.11 SP10.
My requirement is to Filter message in PI moni based on a particular DeviceID field in the paylaod.I have set filters in SXMS_LMS_CONF.
But upon testing the extractor, the messages are extarcted based on the interface mentioned in the filter criteria, and not the particluar field of the message.
I have referred a few bolgs on this topic , but could not find a relevant solution to my issue. Am i missing any configurations in this? Or is his not possible without TREX.
Could anyone suggest a solution for this.
Thanks.

Filter
Extractor:
XPath: nm:XXXXXCreateRequest/MeterReadingDocument/UtiltiesMeasurementTask/UtiltiesDevice/UtilitiesDeviceID

Performance impact of Content based message search in IE

Hello Experts,
I am working on implementing Content based message search in IE in PI 7.0 and PI 7.1 landscape.
All the configurations are done and its working fine in Development scenario.
I need help in identifying , how this actually works on technical level as in how the messages are getting searched based on the filter criteria, if there is any table getting created in background and values are getting stored etc.
And also how could this impact the overall performance after implementing it in Production system.
Thanks in advance!
Warm Regards,
Lisin

Hi Lisin
Not sure about 7.0/1 but for 7.4 these are the tables.(most probably tables should be same)
When you configure a filter for UDMS search on ABAP stack(Tcod: sxms_lms_conf)
Entries will be created in the following backed ABAP tables. (you can go to se16 and check the entries).
SXMS_LMS_EXTR
SXMS_EXT_FIL
SXMS_NSPREFIX
Data will be stored in this table
SXMSPDATA
When you configure a UDMS filter in RWB(java stack), entries will be created in the following backend tables
XI_AF_LMS_EXTRACTR
XI_AF_LMS_FILTER
Data will be stored in the table (only the message id, direction, key field,value and position)
XI_AF_LMS_DATA
We have UDMS configured in our production system, and i never saw any performance issue.
Regards
Osman

Content based receiver detrmination

Similar Messages

Maybe you are looking for