Content generation [Error: Duplicate overlay IDs are not allowed]

This means what then? And why?

I'm getting this error message as well when trying to make a tooltip, basically having two object states with buttons pointing to each object state. Any idea on how to fix?

Similar Messages

Content generation error. [Error: Duplicate overlay IDs are not allowed]

Has anyone else experienced this? I'm creating a hidden navigation menu that has buttons for showing and hiding it. When the menu is on, there are a number of buttons grouped together in one of the states. It works when I preview with the preview tool, but when I try to preview through Folio Builder I get the error message: Content generation error. [Error: Duplicate overlay IDs are not allowed]
All of my multi-state objects have unique names, as do buttons and layers and I still get this error. Any ideas?
Thanks,
Christopher

Attached are screenshots of my layers palette, object states and buttons. I noticed in the layers palette, after I've made the menu into a multi-state object there's a sub-group called "normal" that's showing up in my layers palette. Could this be it?

Duplicate property names are not allowed 'max'

I'm puzzled by the above error. It seems I can only add in one aggregate in a single query. The error shows up in the simple example below, if I remove one of the AVG the error goes away. I could create multiple queries and join them but
I've seen samples that suggest this should work. Any thoughts as to what I'm doing wrong?
SELECT MAX(Driver), AVG(Time), AVG (SpeedInKmPerHour)
FROM input
TIMESTAMP BY DataTimestamp
GROUP BY Driver, TumblingWindow(second, 1);

Hi Michael,
I'm using Stream Analytics to issue speading tickets in a driving game (they are actually achievements). It looks very similar to what you are doing, are you tracking real cars?
I started with this query:
-- Select the average speed over a 10 second tumbling window
select Driver, avg(Speed) as AverageSpeed
from telemetry
group by TumblingWindow(second, 10), Driver
Then tried this:
-- Select average speed where it exceeds
-- 100 MPH in a 10 second sliding wondow.
select Driver, avg(Speed) as AverageSpeed
from telemetry
group by SlidingWindow(second, 10), Driver
having avg(Speed) > 100
And am now using this:
-- Limit the output events to one per minute
with Speeds as
select
Driver,
avg(Speed) as AverageSpeed
from telemetry TIMESTAMP By CreatedTime
group by SlidingWindow(second, 10), Driver
having avg(Speed) > 100
select Driver, max(AverageSpeed) as Speed
from Speeds
group by TumblingWindow(minute, 1), Driver
Hope this helps.
Regards,
Alan
Free e-book: Windows Azure Service Bus Developer Guide.

Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

Dear Friends,
In Se38 abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
In the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
Please suggest how to resolve the errors.
Regards
Sridhar

Hello,
Why are you directly executing these programs?
You will not expect these program to execute directly by going to SE38.
I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
Hope this is informative and solves your issue.
Regards,
Ravi

You are not allowed to have zero line only massages no. m8278

Hi all,
At the time of MIRO Reversal we are facing error massage.
You are not allowed to have zero line only massages no. m8278
Because of wrongly 0.00 amount posted in MIRO posting.
What we do please help me it is production system error.
Thanks & Regards,
Juhi
Edited by: juhis022 on Nov 8, 2011 1:43 PM

this is because for the document which you posting MRIS is not covered with invoicing plan settlement.
Please create a invoicing plan and settle through MRIS.

Wild Cards are not allowed for this info object

Hello Experts,
I am getting some problem, when I trying to find the some selections for info object in variable selection screen; it giving some error like u201CWILD CARDS" are not allowed for this info object.
I am trying to find the search item like this: TELENOR*
When I click on find button it is giving error.
Please any body help me in this matter.
Thanks & Regards
Prathap.

Hi,
You need to create a selections option variable on the characteristic that needs to be filtered.
After doing this, when you run the query, select the * from the dropdown box,and give the value.
Hope this helps u..!!
-Pradnya

Nested aggregate functions are not allowed

I need a calculation that divides a parcial value (based on a condition) by the total. It is something like that:
CALCULATION 1:
PARCIAL_VALUE = CASE WHEN DURATION >= :PARAMETER THEN MEASURE_VALUE ELSE 0 END
CALCULATION 2:
DIVISION = CASE WHEN MEASURE_VALUE = 0 THEN 0 ELSE PARCIAL_VALUE / MEASURE_VALUE END
Calculation 1 only works if I use a SUM before the CASE. If I don't use the SUM, the calculation doesn't aggregate.
I believe I also should add a SUM before the CASE of Calculation 2, but I can't. I got the error: Nested aggregate functions are not allowed.
I tried to merge the two calculations, but I got the same error. I also tried to create a calculated item in detail level in the Administrator, but it didn't work too.
How can I reformulate this calculation in order to avoid this error?

I got the correct result with this formula:
CALCULATION 1:
PARCIAL_VALUE = SUM(CASE WHEN DURATION >= FIXED_VALUE THEN MEASURE_VALUE ELSE 0 END)
CALCULATION 2:
DIVISION = PARCIAL_VALUE / SUM(MEASURE_VALUE)
It didn't return a division by zero error.
The calculation works and correctly aggregates the data when I use a fixed value in the CASE. When I change the fixed value by a parameter, the calculation 1 works perfectly, but calculation 2 doesn't aggregate.

What does 'init functions are not allowed in this objset' mean and how can it be fixed?

We have added some init functions to the beginning of the obj.conf file so that we can proxy off to Weblogic.
However when we try to run the Web server we get an error message 'init functions are not allowed in this objset'.
The syntax seems to be correct. Has anyone any idea how this can be fixed?

You are probably using iPlanet Web Server 6.0 or higher; starting with 6.0, the web server does not allow Init directives to appear on the obj.conf file. Instead, place your Init directives in the magnus.conf file.
This is documented in the Installation and Migration Guide at http://docs.iplanet.com/docs/manuals/enterprise/50/ig/migrate.htm#20780 in the Programmer's Guide at http://docs.iplanet.com/docs/manuals/enterprise/50/pg/1-intro.htm#13565 and in the NSAPI Programmer's Guide at http://docs.iplanet.com/docs/manuals/enterprise/50/nsapi/02_objcn.htm#13097

Content generation error: invalid url for web content overlay

Hi,
I am having an error message " content generation error: invalid url for web content overlay" when I want to upload the article.
I don't have any link with that article and this is my 1st time having this kind of error. I am using indesign CC
Please help.
Thanks,
Rush O

I’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down.

Pan And Zoom Overlay Content Generation Error Invalid Asset

I am attempting to create a Pan AND Zoom overlay, I can get the overlay to work if I choose Pan only, but if I choose Pan AND Zoom and then go to preview, I get the following error: "Content Generation Error: Invalid Asset". Any ideas? I am using V17 of the tools, (the latest before todays update)

What image file format are you trying to turn into a Pan-and-Zoom overlay?? I encountered this error last night (I found this thread while searching here for "Invalid Asset"), and determined that it was because I had placed a .PSD file. Once I converted the image to JPG, I got it to work.

Content generation [Error: Unable to access the output directory. The directory is not writable, so

Content generation
[Error: Unable to access the output directory. The directory is not writable, so the folio cannot be saved.]
This means?
This is fun BTW. Two days and two different silly errors applying themselves arbitrarily. Yesterday was the network, today its this.

heres the fix i used for on a Mac
1. While in the Finder, select the menu command Finder > Preferences.
2. In the General panel, ensure the option "Connected Servers" is selected under the heading "Show these items on the desktop:", then close the preferences dialog box.
3. Choose the menu command Finder > Hide Others.
4. Close all open Finder windows to ensure you can see all items on your desktop.
5. If you locate what appears to be a mounted volume with the name "Users", Control + Click on its icon and choose the contextual menu command Eject "Users".
6. Add or update your article(s).
7. Cross fingers
8. If doesn't work ask for a refund

Content Generation Error in InDesign

"Content Generation Error" in InDesign-every time I try to preview my document I get the following message:[Error: The assets for one or more overlays could not be located. Verify the assets used are available on disk, then update the article.]. Everything was working fine perfectly just the other day when all I did was preview it in InDesign. I can't think of anything that I could have done to ruin it. All my links appear to be fine, and so far I've gone through and stripped most of the document to find the problem but it won't work unless I take out 99 percent of the document. It seems to have multiple issues and appears to be an entire corrupted document rather than just a few issues with MSOs. The document consists of five pages with vertical and horizontal layouts and I have slideshows, scrollable frames, and multi-state objects but no audio.

That was the first thing I tried because obviously I wanted to find out if it was a problem with my file or a general issue with all uploads to that folio. It seems to be working ok now, although I still have no idea what the problem was and I have never seen that error message before :s
Thanks for your response.
Adam

"Content generation error. Failed to Export the PDF file"

Building a multi-folio in InDesign 6 Folio Builder V30. Received "Content generation error. Failed to Export the PDF file" on several of the spreads. I have tried reducing the original pdf files sizes, but that did not help.
Any suggestions on other possible causes or way to fix.?
thanks
Christopher Huber
MMN

I'm very new to DPS so I hope the following description makes some kind of sense.
My magazine is in the process of doing trial runs for an iPad edition. I'm setting some templates up for us to work off so the process from magazine to iPad will run a lot smoother month to month.
So far I've set up some dummy stock pages in an InDesign CS6 document, currently 15 pages long.
All images are linked and all fonts have paragraph styles applied to them.
I'm at the stage I want to check the document on my iPad to test run font sizes and their legibility.
We have successfully been able to export the document as a jpg file but we really need the PDF format. When attempting this we get the above message.
Sonia.

Content generation error ...

"The page size aspect ratio must match the folio aspect ratio." is an error i keep getting, although my file is 1024 px wide. It isn't however 768 px high. It's higher, to create a scrollable page. Is there a minimal / maximal size, are there constraints ?
Also sometimes when i already have a portrait lay-out & want to add the landscape lay-out, InDesign's Folio Builder thinks it's still the portrait lay-out, so he does not add the landscape version, does not seem to see the difference ?!

I'm also having GENERATION ERROR but on the article side of things
Content generation
[Error: Invalid value for parameter 'portraitDocument' of method 'exportMiniFolio'. Expected Document, but received /Users/christian/Library/Preferences/StageManager.BD092818F67280F4B42B04877600987F0111B59 4.1/Local Store/dmp/City Guide_2011_6_24_8_28_7/WiFi Ad_2011_6_24_8_28_7.folio.]
Any remedy for this?

Content generation error. [Error: invalid asset]

I'm am trying to add an article to a Folio and am getting "Content generation error. [Error: invalid asset]. I have re-imported all of the files in the article. I'm stumped. Anyone have any ideas?

Hm. Might be that the two errors are of a different kind:
[Error: Invalid asset] vs. [Error: Invalid asset location].
I have an error with a simple image I want to use with "Pan and Zoom" ("Schwenken und Zoomen" in my German InDesign CS5.5 v7.5.2 on OSX 10.6.8).
The error message translates to "[Error: Invalid asset]":
After a bit of experimenting I think I know why there was an error.
My first attempt was on an TIFF image (=> ERROR), then I tried with a JPEG version (NO error).
Too bad Overlay Creator cannot detect wrong file formats for the given task.
Uwe

Content generation [Error: Duplicate overlay IDs are not allowed]

Similar Messages

Maybe you are looking for