Context connection and error ORA-20100: System.AccessViolationException

I created a .NET stored procedure by following the instructions on this web (used different proc name):
[http://www.oracle.com/technology/obe/net11gobe/stfunc/vs2.htm]
I can deploy it fine into the database but got the following error when I ran it in SQL*Plus Worksheet:
ORA-20100: System.AccessViolationException
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at Oracle.DataAccess.Client.OpsCon.OpenUsingExtProcContext(IntPtr ociExtProcContext, IntPtr& opsConCtx, IntPtr& opsErrCtx, OpoConValCtx pOpoConValCtx, OpoConRefCtx& pOpoConRefCtx)*
at Oracle.DataAccess.Client.OracleConnection.OpenExtprocConnection()
at Oracle.DataAccess.Client.OracleConnection.Open()
at OracleTestProject.Class1.GetName()
ORA-06512: at "SYS.DBMS_CLR", line 243
ORA-06512: at "COMMPROD10.GETNAME", line 6
I got the following error if I ran it again:
ORA-20100: System.AccessViolationException
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at Oracle.DataAccess.Client.OpsSql.ExecuteReader(IntPtr opsConCtx, IntPtr& opsErrCtx, IntPtr& opsSqlCtx, IntPtr& opsDacCtx, IntPtr& opsReaderErrCtx, IntPtr opsSubscrCtx, Int32& isSubscrRegistered, Int32 bchgNTFNExcludeRowidInfo, Int32 bQueryBasedNTFNRegistration, Int64& query_id, OpoSqlValCtx& pOpoSqlValCtx, String pCommandText, OpoDacValCtx*& pOpoDacValCtx, IntPtr[] pOpoPrmValCtx, String[] ppOpoPrmRefCtx, OpoMetValCtx*& pOpoMetValCtx, Int32 NoOfParams)*
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Boolean fillRequest, CommandBehavior behavior)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader()
at OracleTestProject.Class1.GetName()
ORA-06512: at "SYS.DBMS_CLR", line 243
ORA-06512: at "COMMPROD10.GETNAME", line 6
The error was gone if I changed the connection string "context connection=true" to regular connection string with specific Data Source;User ID;Password in the .NET stored proc. Does anyone know how to solve it?
FYI, I have installed Oracle Database 10.2.0.1.0 and then upgraded ODE.NET to 10.2.0.2.20 and then installed Oracle Database patch 10.2.0.4 on my machine.
I have also installed the latest ODP.NET 11.1.0.6.20 and Oracle Developer Tools for Visual Studio from the web:
[http://www.oracle.com/technology/software/tech/windows/odpnet/index.html]
The top most line in my GAC showed both Oracle.Database.Extensions and Oracle.DataAccess have Version= 2.102.2.20.
Thank you so much for the help!
Jenny

skj,
Thank you for the reply!
Yes, the Oracle Database patch 10.2.0.4 contains both ODE and ODP. The database I tried to connect to is on my machine so there was no remote server.
Here is the result when I ran: gacutil /l oracle.database.extensions:
Microsoft (R) .NET Global Assembly Cache Utility. Version 2.0.50727.42
Copyright (c) Microsoft Corporation. All rights reserved.
The Global Assembly Cache contains the following assemblies:
oracle.database.extensions, Version=2.102.2.20, Culture=neutral, PublicKeyToke
n=89b483f429c47342, processorArchitecture=x86
oracle.database.extensions, Version=2.102.4.0, Culture=neutral, PublicKeyToken
=89b483f429c47342, processorArchitecture=x86
oracle.database.extensions, Version=1.102.3.0, Culture=neutral, PublicKeyToken
=89b483f429c47342
oracle.database.extensions, Version=1.102.4.0, Culture=neutral, PublicKeyToken
=89b483f429c47342
Here is the result when I ran: gacutil /l oracle.dataAccess:
The Global Assembly Cache contains the following assemblies:
oracle.dataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f
429c47342, processorArchitecture=x86
oracle.dataAccess, Version=2.102.4.0, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
oracle.dataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f
429c47342, processorArchitecture=x86
oracle.dataAccess, Version=1.102.4.0, Culture=neutral, PublicKeyToken=89b483f4
29c47342
oracle.dataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f
429c47342
I am not sure which version is really used. Maybe I should downgrade my ODP?

Similar Messages

Why i receive errors: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"

Hello,
"C:\app\xps\product\11.2.0\dbhome_1" where is my installation of database oracle enterprise 11g; I use Windows 7 Pro.
I have in System PATH : C:\app\xps\product\11.2.0\dbhome_1\bin
I have in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > SYSMAN > OracleDBConsoleorcl : "ORACLE_HOME" value "C:\app\xps\product\11.2.0\dbhome_1"
When i execute "sqlplus / as sysdba" command, i receive error: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"
If i execute
set ORACLE_HOME=C:\app\xps\product\11.2.0\dbhome_1
C:\>set PATH=%ORACLE_HOME%\bin;%PATH%
sqlplus "/ as sysdba"
I don't receive Error.
Why?

You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM.

10g Installation and Error : ORA-12514 : Listerner cant recog. service requ

Hi,
I installed 10g, and trying to start sql plus. I entered
username: orcl
password: my own password
host string: name of my computer
I am getting the error: ORA-12514: TNS: Listener does not currently know of service orequested in connect descriptor.
I started the services and tried again but same problem.
I also tried system and sysman as username, w/o a password and included my computer name, but still facing the same problem.
Any thing else I should do besides uninstalling and reinstalling ?
Thanks

Where did the user name orcl come from? It certainly is not going to be there unless you logged in with a DBA account and created it: Did you?
So back to basics ... what version of Oracle did you install? 10g is a marketing label not a version number. It is likely something between 10.1.0.2 and 10.2.0.4.
Second how did you install the database? With the Oracle Universal Installer or with a script? Were there any error messages?
Have you checked the installation log?
Has it ever worked in the past and is now broken or has it never worked?
Is the listener running? How did you check?
When you say "I started the service" you are in what operating system and you started what service and how?
My guess, and it is only a wild guess given how little information you provided, is that there is an issue in your listener.ora and/or tnsnames.ora files: Post them along with the value you are entering as "Host" when you try to log in.
Again just a guess ... the user name should be SYSTEM, the password whatever you entered, and the Host "orcl."

Database Link and error ORA-02019

Oracle 9.2.0.6 on Windows 2003
Has anybody encountered this before and been able to resolve.
SQL> connect SchemaA/password@NSN1
SQL> create database link MyLink1
2 connect to REMDB identified okm135
3 using 'STAF'
4 /
Database link created.
SQL> create or replace VIEW rem_mydocs as
2 (select * from mydocs@MyLink1)
3 /
View created.
SQL> grant select on rem_mydocs to UserA ;
Grant succeeded
SQL> Create or replace function fn_rem_mydocs
2 return Sys_RefCursor
3 IS
4 v_rc Sys_RefCursor;
5 begin
6 open v_rc for
7       select * from rem_mydocs ;
8 return (v_rc);
9 end;
10 /
Function created.
SQL> grant execute on fn_rem_mydocs to UserA;
Grant succeeded
SQL> connect UserA/test975@NSN1
Connected.
SQL> create or replace synonym rem_mydocs for SchemaA.rem_mydocs;
Synonym created.
SQL> create or replace synonym fn_rem_mydocs for SchemaA.sp_rem_mydocs ;
Synonym created.
SQL> select count(*) from rem_mydocs ;
COUNT(*)
      324
SQL> var g_ref refcursor
SQL> begin :g_ref := fn_rem_mydocs; end;
2 /
SQL> print g_ref
ERROR:
ORA-02019: connection description for remote database not found

Metalink Note:262881.1
The information in this article applies to:
Oracle Server - Enterprise Edition - Version: 8.0.x to 9.2.0.x
This problem can occur on any platform.
Errors
ORA 2019 connection description for
Symptoms
Describe on a Synonym which is based on a database link may issue error:
ORA-2019 connection description for remote database not found
Select from the synonym works successfully.
Cause
Based on the Bug 3071468 this issue happens when the local
and the remote database have different domain name in the GLOBAL_NAME.
For example if:
select * from global_name;
gives from local database:
PROD.UK.ORACLE.COM
and the remote database has:
TEST.US.ORACLE.COM
then we have different domains for the global_name.
This does not reproduce when the domain is the same for both global_names.
Fix
This issue is fixed in 10.1.0.2.
For previous versions we have the following 2 workarounds:
1. Use View in the place of the synonym. This works.
2. Alter one of the databases global_name , so that the 2 global_names to have the same domain.
For example in the above example chenge the TEST database as:
sql> alter database rename global_name to test.uk.oracle.com;
Then you would have to drop and recreate the database link.
References
Bug 3071468 - Ora-2019 May Occur When Describing An Synonym Using A Database Link
Regards,
Reza
Message was edited by:
Reza

Import and error ora-12203

Hi,
I got this error ora-12203 (TNS:unable to connect to destination) when I was importing a table into my own schema. I don't know whether the error is related with import. My question is: when performing import, can other user login into the database?
Thanks,
Richard

Hi Richard,
The database will you to logon irrespective of what other work you are doing with whatever tool you are using. The Exceptions are :-
If the refered schema comes under certain restriction of the assigned profile.
If the database is running in RESTRICTED mode and you are not having accessibilty during this peiod.
As for your error in the import statement, check the connection you are using in the import statement.
I'm personally using import at least 10 times a week and usually come across these errors. These errors are all human errors and not bugs in the program.
Bye,
Piyush.

Adding REDO_Collector and Error:ORA-02082: a loopback database link...

Hi, when I tried to add REDO Collector by command
avorcldb add_collector -srcname av_db -agentname avagent -colltype REDO -av hostname:port:service name
I got following:
Collector added successfully
Collector name (collname): REDO_Collector
ERROR: ORA-02082: a loopback database link must have a connection qualifier.
Any idea...? Please..

i tried using -srcuser and i am getting the following error message
avorcldb add_collector -srcname ORCLDB -agentname ORADB_AGENT -colltype REDO -srcuser av_user -av oraods.domain.com:1532:ORCL.WORLD
unrecognized argument -srcuser was ignored
unrecognized argument av_user was ignored
collector REDO_Collector for source ORCLDB already exists
initializing REDO Collector
ERROR: could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oraods.domain.com)(PORT=1532))(CONNECT_DATA=(SERVICE_NAME=ORCL.WORLD)))
ERROR: java.sql.SQLException: ORA-01017: invalid username/password; logon denied

National Language Support and Error ORA-01858

Hi,
I have a problem using NLS.
When I use NLS for Italian,I become the error ORA-01858 -->
"a non-numeric character was found where a numeric was
expected".
But with the same query I use for NLS_Italian,it works with
NLS_German and NLS_English.
I use this date-formats "DD.Month YYYY" , "DD.MM.YYYY", "DD.MM"
For example:
Select to_char(sd.Datum,'DD.Month YYYY') Datum ,
sd.FONDSVERMOEGEN, sd.AKTIEN, sd.KASSE, sd.RENTEN,sd.FUTURES,
sd.WERTPAPIERE, sd.IMMOBILIEN,
sd.KUPON, sd.DURCHSCHNITT_RENDITE, sd.DURCHSCHNITT_RL from
Strukturdaten sd,fondsdaten_allgemein fd
where sd.match=fd.match and sd.match=amfcomm .
Can somebody help me??

Can you tell us what the value of sd.Datum is in the queries?

Nationnal Language Support and Error ORA-01858

Hi,
I have a problem using NLS.
When I use NLS for Italian,I become the error ORA-01858 -->
"a non-numeric character was found where a numeric was expected".
But with the same query I use for NLS_Italian,it works with
NLS_German and NLS_English.
I use this date-formats "DD.Month YYYY" , "DD.MM.YYYY", "DD.MM"
For example:
Select to_char(sd.Datum,'DD.Month YYYY') Datum ,
sd.FONDSVERMOEGEN, sd.AKTIEN, sd.KASSE, sd.RENTEN,sd.FUTURES,
sd.WERTPAPIERE, sd.IMMOBILIEN,
sd.KUPON, sd.DURCHSCHNITT_RENDITE, sd.DURCHSCHNITT_RL from
Strukturdaten sd,fondsdaten_allgemein fd
where sd.match=fd.match and sd.match=amfcomm .
Can somebody help me??

Can you tell us what the value of sd.Datum is in the queries?

Post installation for Portal and errors for new system

I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
2) When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 05:05_25/03/10_0032_7012350
See the details for the exception ID in the log file
The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
J2EE Process Details
Name Type PID Status Debug
Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
SDM SDM Server 4,736 Running Switched off
Server0 ID7012350 J2EE Server 596 Running Disabled
Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
Thanks,

Hi Jay,
Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
- Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
- Check JAVA_HOME Enviromental variable is added or not under "System Variable'
Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services manually and change prperties as automatic)
Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
Hope it helps
Regards
Arun

FOR UPDATE on scrollable cursor and error: ORA-00907: missing right parenthesis

If change my query to have a FOR UPDATE and make it an updatable scrollable cursor I get an error on the updateRow() command saying "ORA-00907: missing right parenthesis"
If I remove the FOR UPDATE it works OK.
The problem I have is trying to update a CLOB from a ResultSet. If I do not upate any other column I get the error saying that the error"
"ORA-22920: row containing the LOB value is not locked"
I can get around this by adding FOR UPDATE. But if I add FOR UPDATE and try to update any non-CLOB column I get the 00907 error above.
Hmmmm. So here is what I can and cannot do:
- I CAN update the CLOB IF I update another column 1st and NO FOR UPDATE clause.
- I CAN update the CLOB only if I have FOR UPDATE clause.
- I CANNOT update just the CLOB without FOR UPDATE.
- I CANNOT update any non-CLOB column with FOR UPDATE.
What a pain in the ***! How am I to provide generic access to the applications being built on my DB layer. This is crazy!

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Andrew Edgar ([email protected]):
I have this same problem!
The error occurs when performing updateRow.
The turning off of auto commit only gets the query to work but not the actual update.
Will this be fixed in the next version of the Driver?<HR></BLOCKQUOTE>
Here is the stack Trace I recieved:
java.sql.SQLException: ORA-00907: missing right parenthesis
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:822)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1446)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1371)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1900)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:363)
at oracle.jdbc.driver.UpdatableResultSet.execute_updateRow(UpdatableResultSet.java:2135)
at oracle.jdbc.driver.UpdatableResultSet.updateRow(UpdatableResultSet.java:1322)

"disk read error" and "error loading operating system"

Hello,
I have a problem with my N100 0768 BSG with Windows XP system. When I turned it on there was a lenovo screen with a sign: "to interrupt normal startup press lenovo care button" as usual. But after that instead of Windows loading there was a sign: "disk read error". I rebooted it, run rescue and recovery and started recovery proces.
However after about 20 minutes of recovery process, I saw a blue screen with some error and I could only shut down the computer. When I turned it on again, there was lenovo screen and after that I saw: "error loading operating system". I rebooted it but now I can't even run "rescue and recovery".
I downloaded some diagnostic programme from lenovo site, burned it on dvd and run on my lenovo. When it was doing "Surface scan test" of my hard drive, there was an error: "Error : Found uncorrectable data error."
I thought about buying rescue and recovery cd from lenovo but I heard that they do not sell it in Poland.
Please help me.
Sorry for my English.
Solved!
Go to Solution.

If you have a dual core processor and 2 GB of RAM you will have no problems running Windows 7. You can check the microsoft hardware compatibility site to find out for sure.
Why 32 bit over 64 bit?
Unless you are doing an application like Video rendering or using a Digital Audio Workstation you probably won't notice any performance difference. Most applications today aren't written to take advantage of a 64 bit OS. This will happen over time but for now - you just don't need it. The 32 bit OS will be more compatible with older peripherals like printers and other devices where the manufacturer may not have built a 64 bit driver. Also when you get the upgrade disk you will get both versions so you can start with the 32 bit and always upgrade to the 64 bit at a later time if you really need it. You can only address a little more than 3 GB of RAM in a 32 bit OS but that is usually overkill for most applications people use. A 64 bit OS will allow you to address more memory but you will not gain any performance increases unless the specific application you run is written as a 64 bit application.
I have also found certain older applications that don't work with the 64 bit OS. So it really depends on what peripherals you are using and what applications you tend to use. The safe bet is to go with the 32 bit version.
If you decide to use XP just burn a copy of the XP disk and then you will have one the next time you need to reload. The licensing has nothing to do with the media - it is all about the license you own. Your license key should be on the bottom of your laptop.
Hope this helps.

P2vhd and error loading operating system

I used p2vhd to create a windows server 2003 server to a vhd file. I have done in this in the past wihtout any issue but it seems this time when i load the vhd i get the message. error
loading operating system. Any idea why this is?

Hi KirkSH,
I am assuming that you are using SCVMM to achieve P2V .
And the following article indicated that server pack2 is required to install into
server2003 when you try to do P2V :
http://technet.microsoft.com/en-us/library/hh427293.aspx
Also it is recommended to use windows server 2003 with sp2 as a VM in hype-v 2008/R2 and hyper-v 2012/R2 .
For details please refer to following links :
http://technet.microsoft.com/library/cc794868(WS.10).aspx
http://technet.microsoft.com/library/hh831531.aspx
Any further information please feel free to let us know .
Hope it helps
Best Regards
Elton Ji
If it is not the answer , please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TCP Open Connection and Error Code 1

So, I have a client that is supposed to continuously try to connect to a server using TCP Open Connection.vi. When the connection is established, the loop is supposed to exit.
psuedocode for the loop I have is as follows (similar code, LV 7.1, exhibiting the same problem is attached)
while (error)
attempt to open connection
Pretty simple, right?
I've had no issues with servers written in LabVIEW, but when attempting to integrate with a server that was written in C, it appeared that the client created multiple connections. I have been able to reproduce this problem by writing a server with Java. The C server was on a remote machine, the Java server on a local. Both see different numbers of additional connections (3 for C, 2 for Java).
Looking at the error codes, I am getting a bunch of code 56 (timeout, expected) and the ocassional code 1 (unexpected). I have noticed that whenever I have this multiple connection problem, I show an error code 1 right before the valid connection attempt and loop exit. Is there someway that a connection is being established (or partially established), but labVIEW is still returning an error? Is there a better way to verify that a TCP connection was actually successful?
Here is example output from the attached code, it shows the error codes generated
56
56
56
1
56
56
56
56
56
56
56
1
56
56
56
56
56
56
56
1
Here is output from my Java code
[2006-05-24 15:43:23.556] - Begin Listening for Connection Attempts
[2006-05-24 15:43:23.587] - Accepting Connection
[2006-05-24 15:43:23.603] - Begin Listening for Connection Attempts
[2006-05-24 15:43:23.603] - Accepting Connection
Running ServerNIOConnection Thread
[2006-05-24 15:43:23.603] - Begin Listening for Connection Attempts
Running ServerNIOConnection Thread
Thanks,
Martin
Message Edited by mmathis2000 on 05-24-2006 05:50 PM
Attachments:
Sample Client.vi ‏21 KB

Hello,
I’m a little curious why you are setting up your client like
this. If it is your objective to just
have the client wait until a connection is made, why not just have the TCP
connect VI have timeout value of ‘-1’ meaning “do not timeout”. This will allow the built-in TCP event
structure to listen for connections and ‘wake up’ your program when a
connection is established. I say this,
because the error messages seem to be dependant on the timeout values. For example, wire in 1ms to the timeout and
see how the messages differ in timeouts as opposed to wiring in “2000” for the
timeout value. This is because the
Connect VI attempts a connection and waits only the specified timeout before
abandoning that attempt and continuing with another attempt. I’m betting in your case connecting to the
server takes longer than your timeout value, so the connection is initiated by
your LV client, the handshaking takes place, your server indicates that a
connection is being made, and sometime during this process your timeout expires
and LV tries the process again thus you see the multiple connections. Go ahead and try this as an experiment – take
your VI, and instead of using ‘localhost’ use the IP address of your favorite
website and change the remote port to port 80.
Change the timeout to -1 and wait for the connection, then change the timeout
to 1 and see all the timeout errors given.
Hopefully this answers your question, please let me know if
you have any additional questions or if this is inaccurate/unclear.
Travis M
LabVIEW R&D
National Instruments

SQL Loader and Error ORA-01847/ORA-01839

Hi,
While using the direct loading in SQL-LOADER when we get the ORA-01847/ORA-01839 all the other records are getting errorred out. It goes fine with the conventional loading.
Should I use some parameters or anything to make sure that all the other records are not rejected when we get the ORA-01847/ORA-01839 error while going with the DIRECT loading.
Thanks
Jibin

In internet I found this short message:
“AL32UTF8 is a multi-byte characterset,that means some characters are stored in more than 1 character, that's true for these special characters.
If you have same table definitions in both databases you likely face error ORA-12899.
This metalink note discusses this problem, it's also applicable to sqlloader:
Import reports "ORA-12899: Value too large for column" when using BYTE semantic
Doc ID: Note:563893.1”
By metalink, I can see the Note linked to a one Oracle Internal Bug for Oracle 11g.....
I'm waiting you suggestion... thanks very much in advance.
Regards.
Giovanni

Unable to "Connect" and "Browse Registry" on systems running Windows 7 or later when creating applications

I'm setting up an application deployment in SCCM that needs to use the existence of a specific registry key as its detection method. When I choose this option I am presented with a button that allows me to connect to a machine and browe its local registry
to add the key in question, like so:
This feature works great on all our Windows XP/2003 machines. But if I try to Connect to anything Windows 7 or later I get the following error:
Since it works on older machines I'm thinking I just need to change some configuration setting somewhere to get it working for Windows 7 or later. Is anyone else experiencing this issue and (if so) is there a fix?

Windows Firewall??
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Context connection and error ORA-20100: System.AccessViolationException

Similar Messages

Maybe you are looking for