Continued trouble making button hot spot invisible after click

I posted this question a few days ago and wasnt able to come up with a solution so I'm hoping to post again and see if anyone can steer me in the right direction. I have a few buttons that use loadmovienum to load a few clips into levels. The code on each button is something similar to:
on(release){
loadMovieNum("print_index.swf",1);
printbutton._visible = false;
webbutton._visible = false;
illusbutton._visible = false;
threedbutton._visible = false;
retouchbutton._visible = false;
But because the print_index movie slowly scrolls across the stage rather than immediately replace it, there is a moment where the button turns completely invisible after the click. Perhaps the bigger problem is that it doesnt make any of the accompanying buttons invisible like it is supposed to- only the one that is clicked. Any ideas?

ah yes i should prob describe the scene better- its a button inside a movieclip. The movie clip makes the button appear to kinda 'float' around the screen slightly and there is a simple rollover action on the button to make it highlight once rolled over. There is an example up at www.darrenlasso.com/newindex.html
And i dont have a tracer on any actions because ive never delved that deeply into AS so im kinda at a loss

Similar Messages

Quickstart to creating Window with Buttons+Hot Spots+

I'm a newbie too Java.
Would someone be kind enough to point me to a quick start... tutoral... sample code or whatever...
- to create a window with...
- Buttons
- Hot Spots
- Hot Objects
- Data Entry Fields, etc...
This will be a demo prototype for an app that may run both as a stand-alone application and a web based application... multi-platform...
thanks for any assistance.
Will

Check out the [url http://java.sun.com/docs/books/tutorial/]Creating a GUI with JFC/Swing tutorial.

Button Hot Spot Problems

Hi guys
I am using the button hot spot method to create a small interactive ‘tag’ that contains the copyright information for the picture of lightening in my app design. The tag is a MSO, made up of two states. State 1 is the icon that you tap to trigger state 2 which is a textbox containing the copyright information. When the user taps the textbox, the MSO goes back to state 1. Therefore, the icon in state 1 is a button embedded in the state (which triggers state 2) and the textbox in state 2 is also a button embedded in the state (to trigger state 1).
Below are two screenshots of the app from my iPad and two close-up views of the MSO. You will be able to see the problem I am encountering with the button hot spot method (see bottom left hand corner of lightening image). Ever since I updated Adobe Content Viewer and DPS Desktop Tools CS6, the MSO (explained above) has a ‘double’ appearance. Both the icon (state one) and the textbox (state 2) are not viewing correctly. This MSO worked perfectly before the most recent updates to DPS and Adobe Content Viewer.
Are there any known issues with buttons embedded in MSOs and the button hot spot method, since the above mentioned updates? Or have I made a mistake when creating the MSO?
Your help is much appreciated!

There are issues, if you use "Effects" together with MSO contents that "expand" the geometric bounds of the MSO (e.g. drop shadow).
The contents would shift slightly depending of the size of the effect. This is a known issue. Not resolved yet.
See:
http://forums.adobe.com/thread/1047429?tstart=150
Uwe

I want make my button visible or invisible on click of button

Hi All
I want make my button visible or invisible on click of button.
Regards
Kirankumar M

HI Kiran,
Your Question:
onclick button should be visible and on second click it should become invisible.
Answer:
In your View
1.Add Two button using Apply Template--actionButton
So two buttons will get added to the view
2.Create an attribute in View Context say buttonset of type com.sap.ide.webdynpro.uielementdefinitions.Visibility
Bind the visible property of second button to buttonset attribute
This attribute is to set visibility
Also create a booloean attribute bool in the View context
3.In DoInit method
wdContext.currentContextElement().setBool(true);
So that both buttons are visible in View initially
4.In First button event handler onActionButton()
call second button eventhandler onActionButton_0()
public void onActionButton(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionButton(ServerEvent)
       onActionButton_0(wdEvent);
    //@@end
Here onActionButton_0() is like one method which is actually making second button visible or invisible based on boolean value bool=true /bool=false
5. Write the following code in onActionButton_0() to perform the actual action
    if(wdContext.currentContextElement().getBool()==true){
            wdContext.currentContextElement().setButtonset(WDVisibility.NONE);
            wdContext.currentContextElement().setBool(false);
else{
       wdContext.currentContextElement().setButtonset(WDVisibility.VISIBLE);
                  wdContext.currentContextElement().setBool(true);
6.Now build and deploy ans run your application.
It works..
Nice Question..
I was excited trying this...
Hope it helps You
Regards,
Archana
Edited by: Archana CTS on Mar 19, 2009 2:08 PM

Class static/dynamic Vi icon invisible after clicking "Visible Items/Terminals"? Why?

I created a class in LabVIEW 2014, then added a VI for Data Member Access; Static Dispatch, & Dynamic Dispatch Template.
I'm just using the default ICON. All of these VI's have terminals connected by default to the class instance and error (In & out).
I can connect up to these VI's, but when I right click and select "Visible Items/Terminals", the VI disappears. It's still there on the screen, but I can't see it. If I turn the label on, I can then locate it.
Seems like a good way to cause some real nasty debugging problems (an invisible code segment).
What's special about the Static/Dynamic dispatch template VI's that they can be made invisible? ...and why would you want to allow this?
Note: I'm currently using a trial version of LabVIEW 2014.

Since it's the trial version of LabVIEW, you can only try to look at the VIs, but they won't let you. Nah, just kidding!
Can you share the VI you're having trouble with? Maybe the VI has no pattern set for the terminals, so it's not actually invisible it's just one big terminal.
Re-read that you have error clusters and stuff wired. I use dynamic dispatch VIs and VIs from the data member access template all the time and haven't seen this before.

Creating hot spots that upon click open a forced-sized window

I tried looking at HELP...but because it isn't semantic
yet...whatever I am using to search on ISN'T finding a
solution...so...
I have created two HOTSPOTS I know how to link then to a
specific file ... I WANT THE LINK to open a pre-sized window. Are
there tools in FW that allow me to do this or do I have to pop into
DreamWeaver.
What I want to happen (but with an imagemap/hotspot)...go to
http://human-landscaping.com/staging/SLERT2/park.html
... then click on one of the image of the building (upper
right-hand corner image)...another pre-sized window should be
opening for you.
Again...I did it user HREF on a img src...how do I do it from
an imagemap/hotspot...are there tools inside of FW?
Thanks, --bill

bdaul wrote:
> I tried looking at HELP...but because it isn't semantic
yet...whatever I am
> using to search on ISN'T finding a solution...so...
>
> I have created two HOTSPOTS I know how to link then to a
specific file ... I
> WANT THE LINK to open a pre-sized window. Are there
tools in FW that allow me
> to do this or do I have to pop into DreamWeaver.
Use Dreamweaver. Fireworks = Image editor. Dreamweaver = HTML
editor.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Follow up on hot spots

To follow-up on previous hot spot question-a response that I received indicated that you couldn't put a hot spot on a background image. Is there any other way for this to be accomplished.
I try to the following to Hot Spot the following items:
Search for home listings here, and
Search for land listings here.
Please look at the following website. You will see what areas that I am trying to Hot Spot.
http://www.grutkowski.com/index5.html
Thank you for your responses.

Simply take your header image out of the body background CSS.
Insert image directly into the HTML document. Insert > Image...
Once you do that, you'll have no trouble using the hot spot tools.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How can I set up a hot spot on my new iPad. I can't call 611 as suggested.

I would like to set up a hot spot with my new iPad but can't figure out how to do that. I cannot log on to the suggested web site and, of course, I can't dial 611 from my iPad.

Good pointer. It lead me to a phonenumber to call and a real person who said she could help set up my personal hot spot. After that things too a turn for the worse. She could not set up the hot spot without cancelling my grandfathered unlimited data plan. She said I had to cancel that and buy a $50/mo 5Gig plan. I told her that is not what the AT&T wireless iPad support web site said. She wouldn't budge and I wouldn't cave in and accept a new plan - so - I did not get a hot spot, but I get to keep my unlimited $30/mo data plan.
End of discussion for now. I'm going to try to find a basis for an appeal. Wish me luck. If I succeed, I'll post here. If not, thanks to the members of this support community for your assistance.

ALV GRID - double click event - hot spot event

Dear developers
I am building a custom application using ALV GRID (OO method).
I have three ALV's on the screen.
User selects a cell on the first ALV from the list. say a specific product group.
The second ALV displays the product records depnding on selection of first ALV. (this works fine).
when the user selects a cell of a specific column on ALV grid 2 using double click event or hotspot I am always getting row ID as 1 , irrespective of the user clickin on row 2 or 3 on the specific cell.
To carry out further processing , I need to get the exact row the user is selecting which I expected to be available in LVC_S_ROID. My further process works always with ROW ID as 1.
I am using event hot spot in alv grid 1. In grid 2 I tried both hot spot and double click . But both returns the index value of row as 1 , irrespective of the cell being clicked is beyond row 1. in second grid.
Looking forward for help or suggestion on this,
Regards
Kumar

Hi
The handler is implemented as follows for all ALV GRIDs.
I give below only the relevant one grid 2 from my code.
Class definition
**03/17/2005 skulist hotspot
handle_skulist FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
Class implementation
**03/17/2005 sku list by currency hotspot on listprice
METHOD handle_skulist .
    PERFORM handle_skulist USING e_row_id e_column_id es_row_no.
ENDMETHOD.                    "HANDLE_HOTSPOT_CLICK
DATA gr_event_handler TYPE REF TO lcl_event_handler.
DATA gr_event_handler_4 TYPE REF TO lcl_event_handler.
The above are done in an include and are public in nature.
Also note that I have similar implementation for similar events for grid 1 bu the event handlers are registered in different names.
The code below is in the maib program , under a custom container for grid 2
CREATE OBJECT gr_event_handler_4.
    SET HANDLER gr_event_handler_4->handle_skulist FOR gr_alvgrid1.
*Based on the user action on grid 2 this form is getting executed. But as I said earlier the parameter I am getting for index is 1 always.
FORM handle_skulist USING i_row_id1 TYPE lvc_s_row
                                i_column_id1 TYPE lvc_s_col
                                is_row_no1 TYPE lvc_s_roid.

Submit button for hot spot quiz

the hot spot quiz functionality is not very intuitive. is there a way to proceed to the next slide after the user hits "submit?" also, is there a way to only allow one hotspot selection that once the user makes a selection he/she cannot keeping placing selections all over the page? thanks.

Hello Lilybiri,
Thank you for offering to help find a solution for my Hot Spot Quiz issues. If you would like to (or have the time to) help me here's what I am trying to accomplish:
We need some Hot Spot quizzes which require the user to click on one, or sometimes one of several, hot spots on an image object. I have already encountered the Captivate 4 hot spot quiz limitation of having to click on all of a group of hot spots in order for the answer to be correct when we want the user to click on just one of any of the correct hot spots. I have developed a customer specific header and footer bar template for each slide, with the footer bar containing navigational buttons for beginning/previous/next/end functionality, have disabled this navigation in the question slides as we don't want this available to the user during the quizzing. Instead, we want to advance to the next question slide if the user clicks the correct hot spot, or produce a text caption (with a continue button to advance to the next question slide) accompanied by an arrow animation indicating the correct hot spot to click (which would require executing an advanced action). The user gets one attempt to answer the question correctly. Each question slide will have a text caption with the question for the user to answer. Because of the limitations I've encountered with Captivate 4 hot spot quizzing I've been considering creating custom question slides just as you suggested. Unfortunately, we have a very tight deadline to meet and a lot of content to pour into this project, so I need solutions that are as simple and quick to develop as possible. It seems that sometimes Captivate does not allow for this to happen and I've been discovering that it's been increasingly frustrating to use. Any assistance you could lend me would be greatly appreciated and I thank you for your time.
Sincerely,
Roland

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

Since downloading IOS 7.0 on my iPhone 4 I do not have the ability to connect to wifi. I can't even move the on/off button at all. Also, the "personal hot spot"

Since downloading IOS 7.0 on my iPhone 4, I cannot connect to wifi. The button is greyed out, so I can't even turn it on. I can't download the upgraded version that fixes some of the bugs because you have to be able to connect to the internet to download it. I also noticed that under "Settings", my Bluetooth and Personal Hot Spot settings are constantly roaming with the circle that just keeps going around and around. I've tried everthing (I think). It was directly related to the 7.0 download because it happened right away. Any ideas? I listen to a lot of eBooks when I commute each day and I need to connect to the internet to download the full versions. I miss my books!!

See if this helps you with the wifi issue. http://support.apple.com/kb/TS1559

Hot spot s not visible after latest iOS version update on my iPad please help

hey personal hot spot is not visible after iOS latest version update on my iPad mini please help

Hey Devinder from chd,
For most issues with Personal Hotspot, try out the basic troubleshooting in the article below. It does talk about iPhone but the troubleshooting is the same for your iPad. If you are still having issues, let me know and I can see what else we can do after that.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/en-us/HT203302
Basic troubleshooting
See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
Install the latest version of iOS.
Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
If you still see the issue, restore the iPhone.
Take it easy,
-Norm G.

After up grade to ios5.1, my 3GS can not use personal hot spot (both USB and blue tooth) .

After up grade to ios5.1, my 3GS can not use personal hot spot (both USB and blue tooth) . Tried reboot, reset network, reset everything, reinstall my xp system on my N B, still does not work. My iPad used to go to Internet via iPhone 3GS personal hot spot, now my 3GS can not find my iPod through blue tooth!!!!

Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(

Ipad hot spot connection trouble

I connect my ipad to the internet via a hot spot on my iphone. Worked perfectly for months and suddenly it won't connect. My phone says there is 1 connection and ipad says connected but the ipad never shows a check beside the iphone hotspot. Any suggestions?
Thanks!

If the hotspot you are trying to connect to is a "captive portal" type of hotspot, which are commonly found in public locations, such as hotels, airports, cafes, etc. If you are connecting to this type of public hotspot, you may be required to complete an additional step before you will be allowed to access the internet. This may be to login/register for an account, acknowledge terms of acceptable use, pay for access time (if its not a free hotspot), or some other similar action. If this is the case, you will be redirected to a login page in your browser after you connect to the WiFi network using the steps that @Weth listed above.

Continued trouble making button hot spot invisible after click

Similar Messages

Maybe you are looking for