Contribute attempting to run SQL code in edit mode

On some PHP sites that using PHP includes and make MySQL
calls, we have seen the following:
When a user edits a page, they see a PHP error saying that
the connection to the MySQL database couldn't be made.
Why in the world is Contribute executing PHP code in an
include? To get around this, we've had to add code around the SQL
connection which simply echoes (with PHP) "unable to connect" if a
connection can not be made.
But, on other sites, we've used echo to see if PHP is indeed
executing in edit mode of Contribute, but it doesn't echo.

Similar Messages

Am facing this error sqlcode :-6502 while running sql code in plsql block

Am facing this error sqlcode :-6502 while running sql code in plsql block.
am using query :
SELECT SUBSTR('123456DE789KL|987654321|B',1,INSTR('123456DE789KL|987654321|B','|')-1) FROM DUAL;
CAN any body tell me why.

BD_Fayez wrote:
I've tried the following, but don't get any error.As I mentioned, most likely variable is too short:
SQL> declare
2 strSub varchar2(2);
3 begin
4 SELECT SUBSTR('123456DE789KL|987654321|B',1,INSTR('123456DE789KL|987654321|B','|')-1) into strSub FROM DUAL;
5 dbms_output.put_line(strSub);
6 end;
7 /
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 4
SQL> SY.

Javascript: Check Internet connection before attempting to run SQL command on remote server

Good evening,
I am developing a form that reads and posts data from/to a table hosted on a remote PC running XP/SQL Server Express 2008 R2. I access the server through the Internet.
My problem is that if the internet connection happens to be down when I -eg- try to save data to the table using the form, the SQL command tries to reach the server for a while, and eventually crashes.
Is there a way to programatically verify that a remote SQL server is reachable over the Internet before attempting to run a command on it?
Many thanks in advance for any help you can provide!
Randy

Did you find a solution to this? I am attempting a similar form and need to verify there is an active internet connection before allowing the form to process.

Does a Hyper-V VM running SQL 2014 Standard Edition support Hot Add Memory?

According to this article: http://support.microsoft.com/kb/956893
This was the case with SQL 2012 Standard Edition when running in a Hyper-V VM:
Q7: Is Hyper-V Dynamic Memory supported for SQL Server?
A7: Hyper-V Dynamic Memory is fully supported with SQL Server. Only SQL Server versions and editions that support Hot Add Memory (Enterprise and Datacenter) can see memory that is added by using Hyper-V Dynamic Memory. SQL Server 2012 Standard
edition also recognizes Hot Add memory when running in a virtual enviroment. SQL Server versions that do not support Hot Add Memory are still supported. But these versions will detect only the memory that is present in the operating system when SQL Server
starts.
I setup SQL 2014 Standard Edition in a VM and set it to Dynamic Memory, and just realized that Standard Edition does not support Hot Add Memory. However, this support article contradicts that, but only mentions SQL 2012.
Is anyone aware of the real answer to this question? I just need to know how to configure the memory for my VM to make it run optimally.

> just realized that Standard Edition does not support Hot Add Memory. However, this support article contradicts that, but only mentions SQL 2012.
It would not have been removed in SQL 2014. So proceed accordingly.
David
David http://blogs.msdn.com/b/dbrowne/

Analyzer - running default calc from Edit mode

In edit mode I can update the database but when the Run default calc script icon is pressed nothing happens - any ideas?

Oh Boy. I am now experiencing this behaviour in Webi. The webi is still in Dev. When I ran on info-view with 'view' mode, it has displayed all tabs in the report, but when I pressed 'Edit' button and did some variable changes, I lost all tabs, but for the first one. I hit the Save button without noticing this behaviour.
I fortunately had a copy of this webi. I see the same behaviour there. View mode shows all tabs, but as soon as I press Edit mode, I lose all tabs except the first one. For now, I am not saving it and coming out. But I need to make changes to this webi.
Strange!!
Anyone else is facing this issue or any SAP solution. We are on BOBJ XI R 3.1 SP3 (We don't have FP3.2 yet)

How can I run RT code in development mode on ni 9068?

This is my first time using NI 9068.
I set Disable RT Startup App in MAX and restart the RT, then click the RUN button on the vi. I saw the User FPGA 1 LED is flashing orange. I don't read any data the modules. I guess FPGA code not running.
Do I need re-deploy FPGA code when run in development mode?
Thanks for you help.

I'm glad things are working for you now.
I wanted to add in something for anyone that may find this thread via Google at a later date.
The orange STATUS LED blinks in specific patterns to provide information about your cRIO. This is the LED you can go to your manual to read about the behavior.
The USER FPGA 1 LED is something you can set in your FPGA code. The behavior of this is not something that you can look in the manual to understand. The behavior is determined by the programmer, not the hardware. While it was a heartbeat in this case, it could be something as simple as turning the LED on when the program starts and turning it off when the program stops for another program. The programmer could opt to leave it off entirely. These are all appropriate uses of the FPGA 1 LED. These could all also be programmed to represent an error. That would also be an appropriate use. Use this LED as you see fit to tell you what is taking place on your cRIO. But, do not look into the manual for guidance as to what the LED is telling you. For that information, you'll need to take a look at the code.
Jeff B.
Applications Engineer
National Instruments

Error running managed code inside DllMain or image initialization

I have a LabView 7.1 DLL, and am calling it from a Visual C++ application. I load the DLL dynamically at runtime using LoadLibrary. When I call the function, I get this:
<mda:msg xmlns:mda="http://schemas.microsoft.com/CLR/2004/10/mda">

<mda:loaderLockMsg break="true"/>
</mda:msg>
in the Visual C++ debug window.
I have been through the pages on this website about creating LabView DLLs and calling them. I have also created very small vi's and exported them, but with the same error. I have uninstalled LabView 7.1, and reinstalled it.
Any ideas?

Hi
What version of C++ are you using?
If you could you post your small VI and associated code I will have a look at it and see if I can get it running with out any errors.
You said you have looked at some help material on the website. Have you tried any of the example pieces of code?
Here is a link for one.
Calling a LabVIEW DLL in Visual C++ that Passes Array Handles by Reference
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=D67C2540A4CE3182E034080020E74861&p_...
See if you can run this with out any errors if you still get the same error with this please let me know
Regards
Tim
AE NI UK and Ireland

Webpage in Edit Mode displays NO editable data!

I used Dreamweaver MX to develop our company's Intranet. Our
HR Director makes changes to the Job Postings page on her own using
Contribute 2. Since the original creation of our Intranet, I've
updated to Macromedia Studio 8. A couple weeks ago she was on
vacation so I updated the Job Postings page for her using
Dreamweaver and it worked fine.
Now, however, when she navigates to the Job Postings page in
Contribute 2, it displays as expected. BUT, when you go into Edit
mode, the page only displays the locked-by-template features and
the editable regions/data don't exist. It's as if the editable area
is empty.
As a test, I pulled the page from the Intranet in DW8 and it
appears just fine. I did a HTML validation on it and it seems fine.
I then configured Contribute 3 on my computer (I don't use it -- it
just came with the Studio) and, just as with using Contribute 2, it
displays fine but in Edit mode it is blank -- no data is shown to
edit.
Some more details: In Contribute 2 in Edit mode, the editable
region where the job posting data should be, it shows a </td>
in bold highlited in yellow. And, nothing else shows. In Contribute
3 in Edit mode, ther editable region is totally blank/empty.
I have no idea what happened. Any ideas? I did download the
latest v2 updater for her machine ... fyi.

Thanks for replying Tom. I tried using the Attach Code button
-- but not sure if it will work (I think it has a character max
limit). Yes, I also thought that when Contribute 2 shows the
</td> in bold highlite it would mean an exrtra closing tag.
However, it doesn't show up in DW or Contribute 3. Regardless, the
page in Edit Mode in Contribute 2 (or v3) doesn't show the editable
region so that I can add/remove jobs for some really odd
reason.

To run a piece of PL/SQL code, in TT is much slower than in ORACLE.

A piece of PL/SQL code , about 1500 lines, package is named rtmon_event, function in it is named rtmon_SHOLD_CUS_RPT;
the PL/SQL code is run in ORACLE.
Now I want to get fast speed, I think of TT.
I rewrite the PL/SQL code by grammer in TT.
But the speed in TT is much slower than the speed in ORACLE.
In ORACLE, to run the PL/SQL code, it need 80 seconds; but In TT, to run the PL/SQL code, it need 183 seconds;
How can I resolve the problem?
Btw: there are some joins of 2 tables, or 3 tables in rtmon_event.rtmon_SHOLD_CUS_RPT, and some complex DML in it.
The run method is :
declare
a number;
begin
a := rtmon_event.rtmon_SHOLD_CUS_RPT ;
end;
Thanks a lot.

The easiest way to view a plan is to use ttIsql and issue the command:
explain SQL-statement;
For example:
explain select a.ol1, b.col2 from taba a, tab b where a.key = b.key;
See the documentation that 'hitgon' pointed you to to help you interpret the plans.
Chris

Cannot run SQL script on Oracle Database 10g Express Edition

I'm trying to upload a script, and the file is being uploaded fine, but in the Script Editor window where I'm going to actually run the script, the entire file content is shown on one line and the whole edit area is in red. I'm not being able to run that script. Also if I create a new script from the editor, the edit area is again in red and I'm not able to save it. Please help me understand what's to be done so that I can run my SQL scripts.

I'd bet the database is down.
Try a login through sqlplus ("Run SQL Command Line" in the Oracle Express Edition 'Start' menu).
Do a CONN / AS SYSDBA
If you get a message about database or memory area not available, try STARTUP.
If that doesn't work, you are best off in the General Database forum or the Express Edition forum.
You'll probably get the most expert response in General Database, but the Express Edition forum can be gentler on newbies (as it is more accepted that questioners are not and do not have access to full-time DBAs).

What is the proper way to demote a Win 2003 Domain Controller running SQL Server 2008 WorkGroup Edition?

Hi,
What is the proper way to demote a Windows 2003 Domain Controller running SQL Server 2008 WorkGroup Edition?
I will be migrating AD from Win 2003 to 2012....
Thanks in advanced.

Running SQL on a domain controller is highly not recommended for performance reasons and for complexities it introduces in the management of both systems (You are already facing this situation now).
I would recommend proceeding like the following before demoting your domain controller:
Install a new SQL server on a member server
Migrate your databases to the new SQL server
Once done, you can safely demote your DC.
More if you ask them here: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=sqlserver
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

How to run an external application from PL/SQL code?

Hi,
I want to call an application like "Notepad" from PL/SQL code in a Windows2000 server. Is there any way to do that?
Thanks, best regards.
Paulo.

declare
r varchar(4000);
begin
dbms_java.set_output(10000);
system_util.runshell('sh /ora9/runBackup.sh', r);
dbms_output.put_line(r);
end;
System_util package is
CREATE OR REPLACE PACKAGE System_Util IS
*System: Generic
*Package Name: System_util
*Description: This is an open source package which holds regular used
     * methods by developers and dba's.
*Created by:        Rae Smith
*Created Date:       27/06/2001
*Notes: This ia an free open source package that holds no warranty and
* therefore no-one connected to the development of this package
* can be made reasponsible for any outcomes by it's use.
MODIFICATION LOG**************************************************************
*DETAILS                                    DATE          VERS          CHANGED BY
*===============================================================================
*Created                                 27-06-2001     1.0           Rae Smith
     /********************************* Public Methhods ***************************************/
     --- getDir returns the first directory value held in the init.ora file
     FUNCTION getDir RETURN VARCHAR2;
     --- getPrev.. returns the prevoise day from a gievn date
     FUNCTION getPrevSat(pDate IN DATE) RETURN DATE;
     FUNCTION getPrevSun(pDate IN DATE) RETURN DATE;
     FUNCTION getPrevMon(pDate IN DATE) RETURN DATE;
     FUNCTION getPrevTue(pDate IN DATE) RETURN DATE;
     FUNCTION getPrevWed(pDate IN DATE) RETURN DATE;
     FUNCTION getPrevThu(pDate IN DATE) RETURN DATE;
     FUNCTION getPrevFri(pDate IN DATE) RETURN DATE;
     --- isNumber returns TRUE or FALSE depending on a datatype passed
     FUNCTION isNumber(pnumber IN VARCHAR2) RETURN BOOLEAN;
     FUNCTION isNumber(pnumber IN NUMBER) RETURN BOOLEAN;
     FUNCTION isNumber(pnumber IN DATE) RETURN BOOLEAN;
     --- The writeFile allow you to write data to a file
     --- writeFile has 2 Versions
     --- v1 pass in the file name and the text to write to a file.
     --- v2 pass in the file name, dbms_sql.varhar2s object
     --- and the amount of rows to procces at a time
     --- This enables you to write to afile in batch mode
     PROCEDURE writeFile(pName IN VARCHAR2, pText IN VARCHAR2);
     PROCEDURE writeFile(pName IN VARCHAR2, pText IN DBMS_SQL.VARCHAR2S, pRows IN PLS_INTEGER);
     --- The appendFile methods allow you to append data to a file
--- This also has the inteligents to create the file if ts does not exist.
     --- appendFile has 2 Versions
     --- v1 pass in the file name and the text to write to a file.
     --- v2 pass in the file name, dbms_sql.varhar2s object
     --- and the amount of rows to procces at a time
     --- This enables you to write to afile in batch mode
     PROCEDURE appendFile(pName IN VARCHAR2, pText IN DBMS_SQL.VARCHAR2S, pRows IN PLS_INTEGER);
     PROCEDURE appendFile(pName IN VARCHAR2, pText IN VARCHAR2);
     --- The clearFile clears the data from a file.
     PROCEDURE clearFile(pName IN VARCHAR2);
     --- checkSyntax is a quick syntax checker for sql statements the is a limit to
     --- the size used in the statement. If you have a error with
     --- a statement then pass in the statement watch as it displays
     --- the point where the error arose.
     PROCEDURE checkSyntax(pSql IN VARCHAR2);
     --- isEmpty this returns TRUE or FALSE
     FUNCTION isEmpty(pValue IN VARCHAR2) RETURN BOOLEAN;
     --- getTimeInMins returns the time in minutes for a specified date
     FUNCTION getTimeInMins (pDate IN DATE) RETURN NUMBER;
     --PROCEDURE get_time_in_mins (pDate IN DATE);
     --- incDate returns a specified date incremented by value
     FUNCTION incDate(pInc IN NUMBER DEFAULT .999999, pDate IN DATE DEFAULT SYSDATE) RETURN DATE;
     --- decDate returns a specified date decremented by value
     FUNCTION decDate(pInc IN NUMBER DEFAULT .999999, pDate IN DATE DEFAULT SYSDATE) RETURN DATE;
     --- getTime returns the time in milliseconds
     FUNCTION getTime RETURN NUMBER;
     --- daysDiff returns the amount of days between two values
     FUNCTION daysDiff(pHigh IN DATE, pLow IN DATE) RETURN NUMBER;
     --- difference returns the diffeence between two numbers always
     --- taking the lowest away from the highest
     FUNCTION difference(pAnum IN NUMBER,pBnum IN NUMBER)RETURN NUMBER;
     --- total returns the value of two numbers added together
     FUNCTION total(pAnum IN NUMBER, pBnum IN NUMBER)RETURN NUMBER;
     --- numberToWords returns the string for a number passed in
     FUNCTION numberToWords(pNumb IN NUMBER) RETURN VARCHAR2;
     --- runShell allows you to run operating commands from pl/sql
     --- Only available with 8i
     --- PROCEDURE runShell(pCmnd IN VARCHAR2, pErrMsg IN OUT VARCHAR2);
     /**************************** Public Vaiables *******************************/
     --- Public variable that holds the operating system directory
     --- that the can be written to from withing the database.
     vDir VARCHAR2(50);
END;
CREATE OR REPLACE PACKAGE BODY System_Util IS
     FUNCTION getDir RETURN VARCHAR2
     IS
     BEGIN
          RETURN vDir;
     EXCEPTION
          WHEN OTHERS THEN
               dbms_output.put_line('ERROR...ERROR...System_Util.getDir');
               RAISE;
     END getDir;
     /**** Private module to get the first directory for utl_file to use ****/
     PROCEDURE getDir
     IS
          CURSOR cDir(p1 IN VARCHAR2)
          IS
          SELECT DECODE(INSTR(value, ','), 0, value, SUBSTR(value, 1, INSTR(value, ',')-1)) dir
          FROM v$parameter
          WHERE name = p1;
     BEGIN
          FOR rDir IN cDir('utl_file_dir') LOOP
               vDir := rDir.dir;
          END LOOP;
     EXCEPTION
          WHEN OTHERS THEN
               dbms_output.put_line('ERROR...ERROR...System_Util.getDir');
               RAISE;
     END getDir;
     FUNCTION getPrevDate(pDate IN DATE, pDay IN VARCHAR2) RETURN DATE
     IS
     BEGIN
          RETURN NEXT_DAY(pDate - 7, pDay);
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getPrevDate;
     FUNCTION getPrevSat(pDate IN DATE) RETURN DATE
     IS
     BEGIN
          RETURN getPrevDate(pDate, 'saturday');
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getPrevSat;
     FUNCTION getPrevSun(pDate IN DATE) RETURN DATE
     IS
     BEGIN
          RETURN getPrevDate(pDate, 'sunday');
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getPrevSun;
     FUNCTION getPrevMon(pDate IN DATE) RETURN DATE
     IS
     BEGIN
          RETURN getPrevDate(pDate, 'monday');
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getPrevMon;
     FUNCTION getPrevTue(pDate IN DATE) RETURN DATE
     IS
     BEGIN
          RETURN getPrevDate(pDate, 'tuesday');
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getPrevTue;
     FUNCTION getPrevWed(pDate IN DATE) RETURN DATE
     IS
     BEGIN
          RETURN getPrevDate(pDate, 'wednesday');
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getPrevWed;
     FUNCTION getPrevThu(pDate IN DATE) RETURN DATE
     IS
     BEGIN
          RETURN getPrevDate(pDate, 'thursday');
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getPrevThu;
     FUNCTION getPrevFri(pDate IN DATE) RETURN DATE
     IS
     BEGIN
          RETURN getPrevDate(pDate, 'friday');
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getPrevFri;
     FUNCTION isNumber(pNumber IN VARCHAR2) RETURN BOOLEAN
     IS
     BEGIN
          IF TO_NUMBER(pNumber)> 0 THEN
               RETURN TRUE;
          ELSE
               RETURN FALSE;
          END IF;
     EXCEPTION
          WHEN OTHERS THEN
               RETURN FALSE;
     END isNumber;
     FUNCTION isNumber(pNumber IN NUMBER) RETURN BOOLEAN
     IS
     BEGIN
          IF TO_NUMBER(pNumber) > 0 THEN
               RETURN TRUE;
          ELSE
               RETURN FALSE;
          END IF;
     EXCEPTION
          WHEN OTHERS THEN
          RETURN FALSE;
     END isNumber;
     FUNCTION isNumber(pNumber IN DATE) RETURN BOOLEAN
     IS
     BEGIN
          IF TO_NUMBER(TO_CHAR(pNumber, 'YYYYMMDD')) > 0 THEN
               RETURN TRUE;
          ELSE
               RETURN FALSE;
          END IF;
     EXCEPTION
          WHEN OTHERS THEN
               RETURN FALSE;
     END isNumber;
     PROCEDURE writeFile(pName IN VARCHAR2, pText IN VARCHAR2)
     IS
          vFtype utl_file.file_type;
     BEGIN
          vFtype := UTL_FILE.FOPEN(vDir, pName,'w');
          UTL_FILE.PUT_LINE(vFtype,pText);
          UTL_FILE.FCLOSE(vFtype);
     EXCEPTION
          WHEN OTHERS THEN
               UTL_FILE.FCLOSE(vFtype);
               RAISE;
     END writeFile;
     PROCEDURE writeFile(pName IN VARCHAR2, pText IN VARCHAR2, pFtyp IN OUT utl_file.file_type)
     IS
          vFtype utl_file.file_type;
     BEGIN
          vFtype := UTL_FILE.FOPEN(vDir, pName,'w');
          UTL_FILE.PUT_LINE(vFtype,pText);
          UTL_FILE.FCLOSE(vFtype);
     EXCEPTION
          WHEN OTHERS THEN
               UTL_FILE.FCLOSE(vFtype);
               RAISE;
     END writeFile;
     PROCEDURE writeFile(pName IN VARCHAR2, pText IN DBMS_SQL.VARCHAR2S, pRows IN PLS_INTEGER)
     IS
          vFtype utl_file.file_type;
          vText VARCHAR2(2000);
          vCnt BINARY_INTEGER;
          vRem BINARY_INTEGER;
          vRowcnt PLS_INTEGER := 0;
     BEGIN
          vRem := MOD(pText.COUNT, pRows);
          vFtype := UTL_FILE.FOPEN(vDir, pName, 'w');
          vCnt := pText.FIRST;
          LOOP
               EXIT WHEN vCnt IS NULL;
          vRowcnt := vRowcnt + 1;
               IF vCnt = pText.LAST THEN
                    vText := vText||pText(vCnt);
                    UTL_FILE.PUTF(vFtype,vText);
                    UTL_FILE.FFLUSH(vFtype);
                    vText := '';
               ELSIF MOD(vCnt, pRows) = 0 THEN
                    vText := vText||pText(vCnt)||'\n';
                    UTL_FILE.PUTF(vFtype,vText);
                    UTL_FILE.FFLUSH(vFtype);
                    vText := '';
               ELSIF vRowcnt = vRem THEN
                    vText := vText||pText(vCnt)||'\n';
                    UTL_FILE.PUTF(vFtype,vText);
                    UTL_FILE.FFLUSH(vFtype);
               ELSE
                    vText := vText||pText(vCnt)||'\n';
               END IF;
               vCnt := pText.NEXT(vCnt);
          END LOOP;
          UTL_FILE.FCLOSE(vFtype);
     EXCEPTION
          WHEN OTHERS THEN
               dbms_output.put_line('ERROR...ERROR...SYSTEM_UTIL.WRITE_FILE');
               UTL_FILE.FCLOSE(vFtype);
               RAISE;
     END writeFile;
     PROCEDURE appendFile(pName IN VARCHAR2, pText IN DBMS_SQL.VARCHAR2S, pRows IN PLS_INTEGER)
     IS
          vFtype utl_file.file_type;
          vText VARCHAR2(2000);
          vCnt BINARY_INTEGER;
          vRem BINARY_INTEGER;
          vMode VARCHAR2(2) := 'a';
          vRowcnt PLS_INTEGER := 0;
     BEGIN
          vRem := MOD(pText.COUNT, pRows);
          vFtype := UTL_FILE.FOPEN(vDir, pName, vMode);
          vCnt := pText.FIRST;
          LOOP
               EXIT WHEN vCnt IS NULL;
               vRowcnt := vRowcnt + 1;
               IF vCnt = pText.LAST THEN
                    vText := vText||pText(vCnt);
                    UTL_FILE.PUTF(vFtype,vText);
                    UTL_FILE.FFLUSH(vFtype);
                    vText := '';
               ELSIF MOD(vCnt, pRows) = 0 THEN
                    vText := vText||pText(vCnt)||'\n';
                    UTL_FILE.PUTF(vFtype,vText);
                    UTL_FILE.FFLUSH(vFtype);
                    vText := '';
               ELSIF vRowcnt = vRem THEN
                    vText := vText||pText(vCnt)||'\n';
                    UTL_FILE.PUTF(vFtype,vText);
                    UTL_FILE.FFLUSH(vFtype);
               ELSE
                    vText := vText||pText(vCnt)||'\n';
               END IF;
               vCnt := pText.NEXT(vCnt);
          END LOOP;
               UTL_FILE.FCLOSE(vFtype);
     EXCEPTION
          WHEN UTL_FILE.INVALID_OPERATION THEN
               IF vMode = 'a' THEN
                    writeFile(pName, pText, pRows);
               ELSE
                    RAISE;
          END IF;
     WHEN OTHERS THEN
          dbms_output.put_line('ERROR...ERROR...SYSTEM_UTIL.APPENDFILE');
          UTL_FILE.FCLOSE(vFtype);
          RAISE;
     END appendFile;
     PROCEDURE appendFile(pName IN VARCHAR2, pText IN VARCHAR2)
     IS
          vFtype utl_file.file_type;
          vMode VARCHAR2(2) := 'a';
     BEGIN
          vFtype := UTL_FILE.FOPEN(vDir, pName, vMode);
          UTL_FILE.PUTF(vFtype, pText);
          UTL_FILE.FFLUSH(vFtype);
          UTL_FILE.FCLOSE(vFtype);
     EXCEPTION
     WHEN UTL_FILE.INVALID_OPERATION THEN
     IF vMode = 'a' THEN
          writeFile(pName, pText);
     ELSE
          RAISE;
     END IF;
     WHEN OTHERS THEN
          dbms_output.put_line('ERROR...ERROR...SYSTEM_UTIL.APPENDFILE');
          UTL_FILE.FCLOSE(vftype);
          RAISE;
     END appendFile;
     PROCEDURE clearFile(pName IN VARCHAR2)
     IS
          vFtype utl_file.file_type;
          vText VARCHAR2(2000);
          vCnt BINARY_INTEGER;
          vRem BINARY_INTEGER;
          vRowcnt PLS_INTEGER := 0;
     BEGIN
          vFtype := UTL_FILE.FOPEN(vDir, pName, 'w');
          UTL_FILE.PUTF(vFtype,'');
          UTL_FILE.FFLUSH(vFtype);
          UTL_FILE.FCLOSE(vFtype);
     EXCEPTION
     WHEN OTHERS THEN
     dbms_output.put_line('ERROR...ERROR...System_Util.CLEARFILE');
     UTL_FILE.FCLOSE(vFtype);
     RAISE;
     END clearFile;
     PROCEDURE checkSyntax(pSql IN VARCHAR2)
     IS
     sqlCur PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
     errPos PLS_INTEGER;
     sqlStmt VARCHAR2(2000);
     BEGIN
          sqlStmt := pSql;
          DBMS_SQL.PARSE(sqlCur, sqlStmt, DBMS_SQL.NATIVE);
     EXCEPTION
          WHEN OTHERS THEN
               errPos := DBMS_SQL.LAST_ERROR_POSITION;
               DBMS_OUTPUT.PUT_LINE(SQLERRM);
               DBMS_OUTPUT.PUT_LINE(sqlStmt);
               DBMS_OUTPUT.PUT_LINE(' ');
               DBMS_OUTPUT.PUT_LINE(LPAD('^', errPos, '-'));
               DBMS_SQL.CLOSE_CURSOR(sqlCur);
     END checkSyntax;
     FUNCTION isEmpty(pValue IN VARCHAR2) RETURN BOOLEAN
     IS
     BEGIN
          IF pValue IS NULL OR pValue = '' OR pValue = ' ' THEN
               RETURN TRUE;
          ELSE
               RETURN FALSE;
          END IF;
     END isEmpty;
     FUNCTION getTimeInMins (pDate IN DATE) RETURN NUMBER
     IS
          vHours NUMBER;
          vMins NUMBER;
          vRetval PLS_INTEGER;
     BEGIN
          vHours := TO_NUMBER(TO_CHAR(pDate,'HH24'));
          vMins := TO_NUMBER(TO_CHAR(pDate,'MI'));
          vRetval := ((60 * vHours) + vMins);
          RETURN vRetval;
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getTimeInMins;
     PROCEDURE getTimeInMins (pDate IN DATE)
     IS
          vHours NUMBER;
          vMins NUMBER;
          vRetval PLS_INTEGER;
     BEGIN
          vHours := TO_NUMBER(TO_CHAR(pDate,'HH24'));
          vMins := TO_NUMBER(TO_CHAR(pDate,'MI'));
          vRetval := ((60 * vHours) + vMins);
          DBMS_OUTPUT.PUT_LINE('The time IN minutes IS: '||vRetval);
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END getTimeInMins;
     FUNCTION incDate(pInc IN NUMBER DEFAULT .999999, pDate IN DATE DEFAULT SYSDATE) RETURN DATE
     IS
     BEGIN
     RETURN (TO_DATE(TO_CHAR(pDate + pInc, 'DD/MM/YYYY HH24:MI:SS'), 'DD/MM/YYYY HH24:MI:SS'));
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END incDate;
     FUNCTION decDate(pInc IN NUMBER DEFAULT .999999, pDate IN DATE DEFAULT SYSDATE) RETURN DATE
     IS
     BEGIN
     RETURN (TO_DATE(TO_CHAR(pDate - pInc, 'DD/MM/YYYY HH24:MI:SS'), 'DD/MM/YYYY HH24:MI:SS'));
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END decDate;
     FUNCTION getTime RETURN NUMBER
     IS
     BEGIN
          RETURN dbms_utility.get_time;
     END getTime;
     FUNCTION daysDiff(pHigh IN DATE, pLow IN DATE) RETURN NUMBER
     IS
          vHighdate DATE;
          vLowdate DATE;
     BEGIN
     IF pHigh > pLow THEN
               vHighdate := TO_DATE(TO_CHAR(pHigh, 'YYYYMMDD'), 'YYYYMMDD');
               vLowdate := TO_DATE(TO_CHAR(pLow, 'YYYYMMDD'), 'YYYYMMDD');
     ELSIF pLow > pHigh THEN
               vHighdate := TO_DATE(TO_CHAR(pLow, 'YYYYMMDD'), 'YYYYMMDD');
               vLowdate := TO_DATE(TO_CHAR(pHigh, 'YYYYMMDD'), 'YYYYMMDD');
     END IF;
          RETURN (vHighdate - vLowdate);
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END daysDiff;
     PROCEDURE dateCheck(pDateFrom IN OUT DATE, pDateTo IN OUT DATE)
     IS
          /* Declare the variable to hold the "from" date */
          vDateFrom DATE;
     BEGIN
          /* If either date_from or date_to is null then set to todays date **
          ** using the sysdate **
          ** today's DATE AND IN the correct format */
          pDateFrom := NVL(pDateFrom, SYSDATE);
          pDateTo := NVL(pDateTo, SYSDATE);
          /* Check that the from date is not greater than the to date if so **
          ** use the system_util.incDate to Increment the date by 1 day */
          IF (pDateFrom > pDateTo) THEN
          vDateFrom := pDateFrom;
          pDateTo := System_Util.incDate(1, vDateFrom);
          END IF;
     EXCEPTION
          WHEN OTHERS THEN
          RAISE;
     END;
     /* calculates the difference of two numbers always taken the high from the low*/
     FUNCTION difference(pAnum IN NUMBER, pBnum IN NUMBER)RETURN NUMBER
     IS
          vTotal NUMBER;
     BEGIN
          IF (pAnum > pBnum )OR (pAnum = pBnum)THEN
               vTotal := (pAnum - pBnum);
          ELSIF (pAnum < pBnum) THEN
               vTotal := (pBnum - pAnum);
          END IF;
          RETURN (vTotal);
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END difference;
     /* calculates the Total of two numbers*/
     FUNCTION total(pAnum IN NUMBER, pBnum IN NUMBER)RETURN NUMBER
     IS
          vTotal NUMBER;
     BEGIN
          vTotal := (pAnum + pBnum);
     RETURN (vTotal);
     EXCEPTION
          WHEN OTHERS THEN
               RAISE;
     END total;
     FUNCTION numberToWords(pNumb IN NUMBER) RETURN VARCHAR2
     IS
          vRetval VARCHAR2(255);
          vNumb PLS_INTEGER;
     BEGIN
          vNumb := pNumb;
          vRetval := REPLACE(TO_CHAR(TO_DATE(vNumb,'j'),'jsp'),'-',' ');
          RETURN (vRetval);
     EXCEPTION
          WHEN OTHERS THEN
          RAISE;
     END;
/*************** Only Available on 8i ********************************\
     FUNCTION Catcherr(pStr IN VARCHAR2) RETURN VARCHAR2
     IS
          LANGUAGE JAVA
          NAME 'catchErr.run(java.lang.String) return String';
     PROCEDURE runShell(pCmnd IN VARCHAR2, pErrMsg IN OUT VARCHAR2)
     IS
     BEGIN
          pErrMsg := Catcherr(pCmnd);
     EXCEPTION
     WHEN OTHERS THEN
          RAISE;
     END runShell;
BEGIN
getDir;
END;

How to 100% Protect PL/SQL Code By Wrapped in Oracle Database 10g R2

Hello,
Is Possible to 100% Protect PL/SQL Code By Wrapped in Oracle 10g R2 ?
If it is not possible by wrap in oracle 10g R2,
Please, let me suggest, how i will be able to 100% protect PL/SQL code in Oracle Database 10g R2.
Because, I have lot of functions, procedures & package's in my project.
Which is running in field filed.
So, i have needed to protect 100%.
Also, will i convert to al functions, procedures & package's to .pll file ?
And .pll file to .plx file?
Is it possible to convert .plx file to .pll file ?
Please, let know any better solutions in this case....
Regards
Mehedi

Hello,
No, wrapping is not a 100% secure method. It could prevent your code from amateurs, but not from professional hackers. Look at the article http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/wrap.htm#BEHGBJAA
It says: "•Wrapping is not a secure method for hiding passwords or table names.
Wrapping a PL/SQL unit prevents most users from examining the source code, but might not stop all of them."
Edited by: apiminov on 03.12.2012 3:23
Edited by: apiminov on 03.12.2012 3:24

Unable to connect to the 2014 SQL Developer's Edition Report Server

Hello,
I have been through the wringer trying to gain access to my report service. I have to admit that I am something of a neophyte with regards to SQL Server but I am pretty good with Windows 7 management in general. I have just installed
SQL 2014 Developer's Edition under Windows 7 SP1. I have connected to the database engine server and loaded a couple of databases. I chose windows authentication and can get into the report configuration manager and the SQL server configuration
manager with no problems. I have registered the URLs for both the web and report manager. I can connect to all of the other instances (database engine, analysis services, and integration services). I have to run with administrator privileges
to connect to the integration services but it does not make any difference when attempting to connect to the reporting service either through report builder 3 or connect through object explorer. I can find no relevant errors in the RS log even after
enabling logging. I have been through many of the articles I could find online but nothing seems to resolve the problem. When connecting it shows Windows Authentication and the correct domain\user. I also browse to find the service so the
URL should be correct. The error that I am getting is as follows:
"Unable to connect to the server at CALYSTO\ReportService. The specified URL might not be valid or there might be a problem with the report server version or configuration. Specify a different URL, or contact your server administrator to verify that
the report server runs SQL Server 2008 or later. Additionally, if you are trying to connect to a SharePoint-integrated report server, verify that SharePoint is installed on the server and that the report server uses SharePoint integrated mode. (Microsoft.SqlServer.Management.UI.RSClient)"
Program Location:
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.GetRSConnectionObject(Boolean ensureOpenConnection)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.ProceedWithConnection(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.Microsoft.SqlServer.Management.UI.ConnectionDlg.IServerType.ProceedWithConnection(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
I have tried fixing the installation with the installation disk, removing the report service instance and reinstalling it, using the administrator account instead of mine (with is of course an administrator). I'm at a loss right now. I have spent
about 12 hours trying to track this down and so far nothing has worked. I'm about ready to reinstall the entire operating system and start all over. I thought that I would try this venue before going to that extreme.
Any thoughts, questions, or ideas would be much appreciated.
Thanks,
-Tom
Tom L

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Getting Error when running sql from concurrent program in R12

Hi All,
I created concurrent program and attached EXECUTABLE which executable method as SQL plus .
Using this program I am running one SQL file in R12 when I am running I am getting below error .
Same king of program I have define in 11i and running it is running can anyone please help me if I need to do any set ups or security thing to resave this problem.
ERROR:
ORA-01017: invalid username/password; logon denied
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 3162719.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Regrds,
Sridhar.

user12000862 wrote:
Hi all,
Thanks a lot giving replay below simple code I have put in my SQL file for testing Eventhough it is giving error .
Table which i am using in Apps schema only.
declare
BEGIN
insert into BRCD_HZ_DNB_XTBL_TEST values (666,'Y','547','Y','12254','TESTING','N','Y');
commit;
END;
/Try this instead
WHENEVER SQLERROR EXIT FAILURE ROLLBACK;
WHENEVER OSERROR EXIT FAILURE ROLLBACK;
insert into BRCD_HZ_DNB_XTBL_TEST values (666,'Y','547','Y','12254','TESTING','N','Y');
commit;
exit;HTH
Srini

Contribute attempting to run SQL code in edit mode

Similar Messages

Maybe you are looking for