Contribute changes not showing after site update

A few months ago I added a top level navigation item to a client site.  That made changes to the code for every page in the site, but the changes the client had made with Contribute 4 still showed in browsers.
Just posted the pages for another addition to top level nav.  This again made changes to the code on every page of the site.  This time the Contribute changes do not show in browsers.
The Contribute files are still in their folders on the server.
Navigation to the pages modified in Contribute has not changed.
Is there a simple fix to wake up the Contribute files?

If there are any errors in yur code, FB will not compile
anything new.
Verify that you do not have any errors in the Problems pane.
Then try Menu, Project, Clean.
Tracy

Similar Messages

  • Website changes not showing after publishing

    I have changed some of my website pages. IWEb says I have published. If I check my folders on mobile me they show the site files as being the most recent version published, but when I try to review the revised pages they are not visible, only the previous versions come-up. I have closed Safari, emptied my caches (multiple times), even deleted the site files on mobile me, all with no success. Help!

    Sounds like your ISP is serving you some "stale" cached files instead of the more updated version.
    Try this:
    Enter your URL in the Address bar of your browser and end it with a ? (question mark). This should force a "fresh" page download.

  • Changes not showing after successfully building up.

    Hello everybody,
    I am new to the forum and also a new novice in Flex.
    I have written an application. I have a page called
    SchedAppointments.mxml, well, after writing the code and building
    the project successfully the page was displayed successfully as per
    requirements. After that, I made certain changes in the page
    (SchedAppointments.mxml), then saved it and build it successfully
    again. Now the problem is that the changes is not showing in the
    browser. What I am viewing in the browser is exactly the same as I
    saw before making the new changes.
    Can anybody tell me why its happening?
    Thanking you in advance,
    Manoj

    If there are any errors in yur code, FB will not compile
    anything new.
    Verify that you do not have any errors in the Problems pane.
    Then try Menu, Project, Clean.
    Tracy

  • External discs not showing after Security Update

    Did recent security update and all of a sudden one of my external drives which has worked fine on a Belkin hub for months is not showing up in Finder.
    Fearing the drive may have failed I connected it to a Macbook running Leopard and it was nstantly seen.
    iDisk was also not showing up for mtime to time.
    Anyone else having Finder issues since updating?
    AC

    OK verified the system (OK) and external drive.
    External drive had wrong free block count which has repaired.
    The thing still isn't recognised on either Belkin powered hub but is recognised if I unplug the hub and connect it direct. Other identical external drives (I have several of the same make/model/capacity) work fine via the hub.
    The problem drive spins up, the hub does not illuminate an LED for that USB socket (unlike the ones that work), then the drive spins down.
    Connecting direct to the Mac and the drive spins up, spins down, then spins u again, and this pattern is completely reproducible.
    If this were a pending hardware failure I'd expect startups to be random on the hub or the main USB port but they're not.
    Very odd.
    AC

  • Email address change not showing on ipad after sync

    iTunes email address change not showing on ipad after sync

    So change it.
    Open iTunes, scroll to the bottom of the main page, tap your account name, log out then sign in with the correct name.

  • Changes I make in camera raw do not show up or update in bridge.

    Greetings.
    I’m working in PS CS4 in XP(government).
    Changes I make in camera raw do not show up or update in bridge.
    These images DO process with the changes when I run my actions.
    For example: Open images in bridge. Edit. Open reaming images in camera raw. Push the images two stops in camera raw. Close camera raw. Images in bridge show no change. Run action to turn raw files into psd. Final PSD appear pushed two stops.
    Purging Cache make no difference.
    Thoughts?

    You are using Embedded thumbnails.  These are small and fast, but do not show raw edits.
    You need to use one of the HQ thumb options to see the edits.

  • HT201407 "Your iPhone could not be activated because the activation server is temporarily unavailable." this massage showing after i update through itune

    "Your iPhone could not be activated because the activation server is temporarily unavailable." this massage showing after i update through itune

    See this discussion.
    https://discussions.apple.com/message/21189708

  • SD Card not showing after Mountain Lion Update

    This matter has been discussed for some time now in
    Apple Support Communities > Desktop Computers > iMac (Intel) > Discussions
    SD Card not showing after Mountain lion Update
    Since the update to Mountain Lion, the SD slot does not show up in Finder.
    Someone gave a fix using the killall in Terminal, and that worked only once.  I have not been able to get that fix to work again.
    The only saving grace for me is that my SD Card us is always from my Nikon camera, and Nikon ViewNX 2 software is able to see and read from the card.
    Killall may have worked partially in that I no longer get the error message telling me that I have removed the SD card improperly, and need to dismount it first.
    However, Finder still cannot see it.

    BrianForbesColgate wrote:
    Thanks, Barney ...
    Those are basics ... Been there, done that, first.
    Then you should hava posted all the troubleshooting you already accomplished.
    Does the card show up in System Information? Or is that another one of the "basics" you've already looked into?
    Does it show up in Disk Utility? If so, have you tried formatting it there to determine if it is a formatting problem?

  • Mic Jack not working after Driver Update, Console unavailable, can't install

    LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
    I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
    I'm running on Windows Vista Ultimate, 64-bit
    My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
    I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
    Any help would be greatly appreciated.
    I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

    Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

  • HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

    How do i update 10.5.8 if my macbook does not show any software updates?

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • C1-01 not working after Nokia update

    Hi,
    C1-01 not working after Nokia update.
    Message shows "Updating" then blank screen, any ideas?

    How did you start the update? OTA or using Nokia Suite?
    Try to run the update through Nokia Suite again.
    If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
    Don't forget if your problem is solved to press the "Accept as Solution" button.

  • Facebook birthdays not working after ios7 update

    Facebook birthdays not working after ios7 update?

    Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
    Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection. 

  • Airport not working after osx update-keychain?

    Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
    "Confirm Application Change
    Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
    This chain is permanent and affects all keychain items used by aiport.
    Don't Change Change All
    What should I have replied? Anyway to reset the airport or download it again?
    Thanks.
    Anyway to reset this or download again? Thanks.

    What should I have replied?
    Change All

  • Usb hard drive not loading after security update

    usb hard drive not loading after security update
    I can't seem to find any other posts about this problem.
    I have three external hard rives connect by a USB hub to my iMac.
    Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly. 
    I get the same issue but not all the time if I turn them on before I boot the iMac.
    I used the disk drive utility to "repair" the drives but they always come back as "probably ok". 
    If I restart the iMac with the drives connected (on), it seems to work but not all the time.
    A bit annoying as I am wondering if the drives are OK or not.
    I don't always need the drives as they are for backing up images from my camera using Apreture.
    This all began after i did the latest security update.
    is the update to blame?
    mahalo.

    Yes, you can still use those instructions to reset the PRAM.
    You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
    Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

  • E7 Nokia Messaging not working after anna update

    hi
    nokia messaging not working after anna update. when i
    -choose provider (hotmail/gmail/yahoo...etc)
    -enter username & password
    -click OK to T&C
    -get error message: "cannot enable this service on the device"
    any ideas?

    I'm having a similar issue. It appears to only impact Hotmail accounts. For me though, this happened without updating the OS. The email client is simply failing to connect to the Hotmail interface. Only two possibilities, either Microsoft changed something on the email gateway or Nokia changed something on their end. Either way, it's not working and has been out of commission for the past week. If this is how corporate friends get along, I'd hate to see what happens in a adversarial relationship.

Maybe you are looking for