Control subvi execution order

I have a test program with 2 subVIs and the first one simply creates a text file and writes a large string to it, the second one writes another string to the same file and then closes it. Is there a way to set execution order as the subVI that writes and then closes the file seems to be executing first. The subVis are independent from each other. Thanks.

No. Just wire the error out of the first VI to the error in of the second VI.
When you switch from a text-based language to LV, the hardest thing to realize is that the position on the diagram has essentially nothing to do with the order of execution. The dataflow concept is very powerful but quite foreign to text programming. The core point is that any node (function, subVI, structure,...) may begin to execute when data is present at ALL of its inputs. Similarly, the node's outputs are not available until the node completes its execution.
Lynn

Similar Messages

[SOLVED] Netctl script execution order?

The man pages are bit ambiguous, but this is what I'd like to know:
Given I'm connecting to wireless network "MyESSID" on interface "wlan0", what is the execution order of these scripts:
/etc/netctl/hooks/*
/etc/netctl/interfaces/wlan0
/etc/netctl/wlan0-MyESSID (ExecUpPost)
Given I'm disconnecting from the same interface/essid, what is the execution order again:
/etc/netctl/hooks/*
/etc/netctl/interfaces/wlan0
/etc/netctl/wlan0-MyESSID (ExecDownPre)
Some of my wireless networks need proxies, and others don't.
I'd like to start/stop Dropbox on connect/disconnect of any network (but only after the proxies are set)
Thanks in advance!
Last edited by sxtynnmach1 (2013-07-27 05:38:39)

Added the feature request to the netctl github page.
Since the hooks/interface scripts are sourced instead of passed to a subshell, they have access to previously-defined variables. At the time of this writing, when netctl sources it's hooks and interface scripts the following are already available in the environment:
$interface (ex: wlan0)
$profile (ex: wlan0-essid)
$action (ex: CONNECT, see wpa_actiond --help)
$ssid
Following the convention of prepending two-digit numbers to my scripts to enforce execution order, I have gotten pretty fine-grained control over my scripts and netctl actions
/etc/netctl/hooks/10-proxy.sh
#!/bin/sh
if [ "$profile" = "wlan0-companyESSID" ]
then
case "$action" in
"CONNECT"|"REESTABLISHED")
export http_proxy="http://proxy.company.com:8080"
unset http_proxy
esac
fi

Copy Control between Sales Orders and Deliveries

Hi Gurus,
please can you tell me why copy control between Sales Order and Delivery doesn't work?
At header level, into copy control, we can set 2 requirement routines, one as general requirement for copying (TVCPL-AUBED) and the other one as requirement for grouping orders into deliveries (TVCPL-AUZUS).
At header level we can also set a routine for data transfer to define how data are passed from Sales Order header to Delivery header (TVCPL-GRUAK).
Then we can set routines at item level, one as requirement (TVCPL-AUBED) and one as data transfer (TVCPL-GRUAP).
When delivery is created with VL10A transaction, at header level only the first general requirement routine is used (FV50B***). Grouping requirement is not used (we also set a break point and the program is not passing into this routine).
Then it is used the requirement routine at item level (FV50B***).
Please can you tel me how we camake working the routine for grouping requirement at header level?
Thank you very much.
Kind Regards
Andrea

Hi, we used standard routine even if to be sure we run also the generation report you mentioned.
Please any other suggestions?
Thank you very much.
Kind Regards
Andrea

Dynpro Table Control Column's Order

Hi everyone,
I am facing a strange issue in a Dynpro Table Control with the order of the columns.
I had to add a new key filed in a standard view. When I am running the Table Maintenance Generator in SE11, the Dynpro Table Control is generated correctly and the new column appears at the right place with the other key fields. But when I display the view data with either in SE11 or using the Customizing link in SPRO, the new key field appears at the complete right end of the Dynpro in between two normal fields.
I tried to delete the screen and to generate it again, I tried to use the same screen number and also a new screen number but the result is always the same. The column's order is not correctly displayed when executing the Dynpro.
The only way the columns are correctly displayed it's if I created a new screen in a new Z program but this solution cannot be consider since we are talking about standard Dynpro / Table / Function Pool. Using a Z program would not permit to use the standard SPRO link no more.
I know that sometimes the Table Maintenance Generator does not work properly but I never saw this kind of behavior before. Can someone help me?
Thank you in advance for your answers,
Sylvain

hi,
r u making through wizard?
it is good practice.
Otherwise first take I/O field, give name and than u can take text field for column heading.
Reward if useful.

Copy Control From Sales Order to Purchase Order

Hi Experts,
I want to ask how the copy control from Sales Order to Purchase Document can be done? Because they are instances that the users have some items in the Sales Orders not copied to Purchase Document.
Thanks a lot!

Hi Experts,
I have seen the documentation for 3rd Party Sales, thanks to some suggestions. However, there is a report which does not work in our Test Environment, the program name is SDMFSTRP. As suggested by some forums, this is another way of connecting Sales Order to the created Purchase Requisition. So I'd like to ask if there are other ways to connect the 3rd Party Sales to the created Purchase Requisition.
And also may I know your scenarios when there will be missing items from Sales Order to Purchase Requisition. There are some instances that from Indent Orders, some SO items are not copied to PR.
Thanks a lot!

"Tab" control and Tab order of controls inside the tab

Hello everybody,
I have created the tab control with 6 'tabs', inside every tab I have some controls, like edit fields etc. I wanted to make an order of controls for every tab, so I have selected the option "Tab-order settings" from menu "Edit" (sorry for translation, I use non-English version of LabView), and tried to set the order. After saving it with "OK" button it turned out that the order is not changed. Simple it seems that the option doesn't work for controls in tabs. Is this a bug or do you have a solution for this?
TIA,
Yazilim.

Sorry LabviewGuru, but I haven't found anything concerning Tab control and tab order inside it. Of course, I have found the topic "tabbing through front panel objects", but it simply describes how to change order for standard controls, not for controls which are inside the Tab control. But maybe you have another, extended help? So can you please copy and paste to discussion forum message this part of your help which concerns the Tab control and tab order, and then send the message?
TIA,
Yazilim.

Add a new field in the item table control of sales order

Hi Experts,
We have created a new custom field in Material master table. Now, they want to add the custom field from material master to the last field of item control of sales order.
Please, let me know the steps to do it.
Regards,
M.Saravanan

Hi,
take program: SAPMV45A
take screen 8459 and add the new field.
Also add the validation in the flow logic.
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10547810&messageID=3132651
Regards
Kiran

Execution order of Multiple Numeric Limit Test?

What is the execution order of "Multiple Numeric Limit Test" in TestStand 2010?
I am using a custom steptype of Multiple Numeric Limit Test. I want to manipulate the input parameter. How can I do that. I am not interested in making a new steptype. I am writing in Post-Expressions and the data is manipulated as they should but it is not evaluated. I is evaluated before the Post-Expressions executes.
For example I am writing: Step.NumericArray[0]= Step.NumericArray[0]*1000/(2.5-Step.NumericArray[0])
The execution order when looking at the TS manual at page 3-13 is Evaluate Post-Expression before Evaluate Status expression. But it is not what I see. I have also tryed using the more simple Numeric Limit Test and it works as I expect it to according the manual.
Anyone knows about any workaround for that?

Hi Ray
Thanks for your reply
I have tried writing what you are suggesting: Step.Result.Measurement[0].Data= Step.Result.Measurement[0].Data*1000/(2.5-Step.Result.Measurement[0].Data)
Still it evaluates the step before the post-Expression. When I am looking at the variables at runtime the Step.Result.Measurement[0].Data is having the correct value but it seems to evaluate the step before the Post-Expressions.
Any other suggestions?

What is the different type mapping faster execution order ?

Order is XSLT, JAVA(SAX), JAVA(DOM), Graphical(sax), and ABAP mappings ?
Is there any Graphical mapping with dom parser ?
Please send the faster execution order .

Hi,
I am not getting exactly what you are looking for,
I think I already had answered your questions in your previous blog
Mapping types performance
Is there any Graphical mapping with dom parser ?
-->Graphical mapping with DOM parser is not possible, thus you have to go for Java Mapping
JAVA mapping
/people/amjad-ali.khoja/blog/2006/02/07/using-dom4j-in-xi--a-more-sophisticated-option-for-xml-processing-than-sap-xml-toolkit
Mapping Techniques
Please let me know if any specific thing that you will be looking for, so accordingly we could narrow down the analysis and answers.
Thanks
Swarup

Dashboard Prompt Execution Order

Hi everyone,
I wanted to create a few test cases to see which order the Dashboard prompts were executing. What I did was I created two identical dashboard prompts, DBP1 and DBP2, on column "Account Number". I set DBP1 to Default to Specific value of 1. I set DBP2 to Default to Specific value of 2. My assumption is that the last prompt that executes is the value that will be shown in a dashboard.
I put the two prompts into a Dashboard and ran a few tests and here is what I found out:
1. The order in which the prompts appear are the dashboard is irrelevant to the execution order.
2. The value to which the prompts are set to is irrelevant to the execution order
3. The name of the dashboard prompts is irrelevant to the execution order
4. The alias of the dashboard prmopt is irrelevant to the execution order
In my trials, the second dashboard prompt's value was always the one being shown. So I created a third dashboard prompt DBP3 set to value 3. Then all the prompts had 3 as their value. My conclusion is that DB prompts are executed in the order in which they are created. Some where in their metadata, there must be a sequence number or internal ID that grows each time a DB prompt is created. Then OBIEE uses this identifier to determine execution order.
Can anyone confirm or deny that?
Thanks!
-Joe
Edited by: Joe Bertram on Dec 5, 2009 10:44 AM

Hi Sunil,
Thanks for the reply. You are correct. Its seems that the dashboard prompts do execute asynchronously.
It turns out the reason why I was seeing newer dashboard prompts taking precendent over older dashboard prompts has to do with the cache. Apparently the last dashboard prompt in the cache, is the value all the prompts will have.
thanks!
-Joe

Actionscript execution order with attachMovie statements

Hi I wonder if anyone's got any decent solutions to this...
Basically whenever I have a script generating an interface by
dynamically placing movie clips (using the attachMovie method), I
often need the actionscript of the attached movie clip to execute
before the rest of the code in the main script continues.
According to normal actionscript execution order, the current
script finishes before 1st frame actionscript of any attached
movies is executed, so say for example I had the following in frame
1 of my root timeline:
trace("start");
this.attachmovie("myMovieClip","movieClip1",this.getNextHighestDepth());
trace("end");
and the movie clip in my library with the linkage identifier
"myMovieClip" has the following on frame 1 of its timeline:
trace("middle");
Normally this would output:
start
end
middle
However I want it to output:
start
middle
end
The only appropriate way I've found so far to do this is to
have a function that is called on completion of the myMovieClip
actions, i.e. in the root timeline:
trace("start");
this.attachmovie("myMovieClip","movieClip1",this.getNextHighestDepth());
movieClip1.onLoaded=function() {
trace("end");
and in the timeline of the myMovieClip movie clip:
trace("middle");
this.onLoaded();
But the problem with this is that if I rather than the
trace("end"); statement I want a series of other commands,
some of them in turn using attachMovie methods, again wanting the
scripts to execute in the order above, I'm going to end up with a
lot of nested onLoaded functions and it's going to end up looking
pretty ugly!
Any thoughts?

you're welcome.
i generally load everything sequentially. if you don't want user's to possibly advance into the display far enough to see a load-delay, then you can use some preload display. here's an example i'm doing for a current client:
www.kglad.com/Files/tf
and click portfolio.
this client has a lot of images to load and wants them presented as soon as possible so i load them sequentially. that makes for an orderly display (though this client only wants a few images viewable on-stage at any one time).

Controlling Entity Posting Order to Avoid Constraint Violations

Hi all,
I am using Jdeveloper 11.1.1.2.
I want to create a row in a master table, then when I commit, I want automatically creating a Row in its detail table.
I am following the instructions of the paragraph 38.8 Controlling Entity Posting Order to Avoid Constraint Violations of the manual.
I have a problem when I write:
myTable.setNumberField(NumberField);
compiling, I have this error: myTable.setNumberField(Number) cannot invoke myTable.setNumberField(oracle.jbo.domain.Number) in myTableEOImpl
I have created myTableEOImpl.java automatically, using the java tab in myTableEO
How can I solve it?
Andrea

Hi,
you must make sure that data types passed to an Oracle ADF BC Number field are pf type oracle.jbo.domain.Number. Often developers forget to import this class and use Java lang Number instead
Frank

How to control shuffle play order?

Hi Everyone
I have an Ipod shuffle I think its 4th gen.
On the computer control panel I can delete songs Import songs in the library. I can check and uncheck. I can rate songs, I can follow all the advise from users and help forums online. I cant seem to understand what I'm doing. I do all the above taks thinking it is controlling the play back on the shuffle when I take the shuffle off the usb cable and putton the headphones.
Yet the shuffle plays sequential or shuffle the same exact songs ... I'd say 20 songs of the 120 songs that has been downloaded to it.
Help! How do I play other songs and control my play order in the earphones.

HI gerrlinggal
thanks!
I had to go to play list by highlight one song and right click the choose menu flyout Lawrence's" Ipod
This worked with one song i saw the syncing icon sync notice at the top banner. I had to highlight all new songs and preform that function as a group of songs
That worked .
Q. But it did not over right songs and cant seem to find how to access the shuffles list of songs on the IPOd/shuffle. So I can delete the old songs. ????? The menu in the ITunes manger is difficult and seem to show only songs on iTunes.
I really had to get lucky finding. the above previous trick.

Filter & init(), execution order....

I just started my Java servlet adventure, here are my questions
1) If I have a filter set up in my web.xml and also have code written in my servlet init() method (which is assoicated with the filter), would the filter program be called to do whatever it's supposed to do first? or the init() would still have to finish what it has to do first and then follow by the filter program?
2) If the filter is being called first, would servlet require the filter program to finish the whole operation before it returns to the init()?
3) Is there any documentation about the execution order of a servlet program (especially when it's related to the web.xml file)?
Many thx.
I understand I could write some programs to find out but I would need some java experts to prove that (even if I write the programs). So I thought I would just ask here anyway.

I just started my Java servlet adventure, here are my
questions
1) If I have a filter set up in my web.xml and also
have code written in my servlet init() method (which
is assoicated with the filter), would the filter
program be called to do whatever it's supposed to do
first? or the init() would still have to finish what
it has to do first and then follow by the filter
program?Specifications: "The init method must complete successfully before the servlet can receive any requests. "
2) If the filter is being called first, would servlet
require the filter program to finish the whole
operation before it returns to the init()?Specifications: "The servlet container calls the init method exactly once after instantiating the servlet. " So I do not understand what you mean by "before it returns to the init()". If it is not the answer you expect, please redefine the question.
3) Is there any documentation about the execution
order of a servlet program (especially when it's
related to the web.xml file)? google for servlet lifecycle.
The order of the filters' execution is the one specified in web.xml.

How to control photo sort order in flickr publish folder

Using LR 5.3 and trying to control the sort order of photos in a Publish folder (Flickr). When I drag-and-drop the photos, they never end up in the location indicated by the dark black bar that appears under the mouse cursor. Usually appear within 5 or 6 places of the dropped location, but sometimes up to 20 places away from the dropped location. Futzing with the location sometimes gets them closer, but not always. It's very frustrating. I've seen comments about certain restrictions for manual sorting (e.g. not feasible in Smart Collections), but no specific reference to sorting in a Publish service. Is there a way to put the photos into the exact order that I want in a Flickr Publish folder? (Note: drag and drop does not work correctly... that's the problem).

Click the Action icon > show view options > Arrange by none > sort by name.

Control subvi execution order

Similar Messages

Maybe you are looking for