Controller restarts while trying to create array

I'm trying to create a new array on new drives on the Lower controller(Drives 8-14). The wheel turns for a few seconds and then the window closes and the admin windows show that both controllers are restarting. The array isn't created.
I already have 2 arrays on drives 1-7 that have been in service for years.
I've updated the firmware and rebooted everything.
Any idea?

Dear,
What is the message no?
The configuration profile is always with respect to a particular material. You have to create configuration profile for each of your configurable material.
CU41 -- Create Configuration profile for a Material ( to create this first you need to define the Material for Varaint Configuration )
Please refer this also,
http://www.sap-topjobs.com/VARCONFG%5B1%5D.pdf
Regards,
R.Brahmankar

Similar Messages

Error while trying to create tree using same EMP how to tutorial

Hi,
I get the following error while trying to create a sample tree similar to the one
posted in the how-tos web page.
The final query that creates the tree is also as follows
The Current Query shown in my apex window and the one on the howtos tutorial is as follows
select "EMPNO" id,
"MGR" pid,
"ENAME" name,
null link,
null a1,
null a2
from "RJOSEEMPCLUB"."EMP"
where DEPTNO = 1
The error is as follows
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Debug:
1: begin
2: wwv_flow_wiz_confirm.create_tree (
3: p_flow_id => :FB_FLOW_ID,
4: p_region_template => replace(:F4000_P112_REGION_TEMPLATE,'%'||'null%',null),
5: p_start_option => :F4000_P112_START_OPTION,
6: p_owner => :F4000_P112_OWNER,
7: p_table_name => :F4000_P112_TABLE,
8: p_id => :F4000_P112_ID,
9: p_pid => :F4000_P112_PID,
10: p_name => :F4000_P112_NAME,
11: p_link_option => :F4000_P112_LINK_OPTION,
12: p_link_page_id => :F4000_P112_LINK_PAGE_ID,
13: p_link_item => :F4000_P112_LINK_ITEM,
14: p_where => :F4000_P112_WHERE,
15: p_order_by => :F4000_P112_ORDER_BY,
16: p_page_id => :F4000_P112_PAGE_ID,
17: p_page_name => :F4000_P112_PAGE_NAME,
18: p_tab_set => :F4000_P112_TAB_SET,
19: p_tab_text => :F4000_P112_TAB_TEXT,
20: p_region_name => :F4000_P112_REGION_NAME,
21: p_tree_name => :F4000_P112_TREE_NAME,
22: p_tree_type => :F4000_P112_TREE_TYPE,
23: p_max_levels => :F4000_P112_MAX_LEVELS);
24: end;

Hi Kart,
If you have the sample EMP table, the DEPTNO values are 10, 20 or 30.
Did you specify a root value for the tree?
Regards
Andy

Application hangs while trying to create a socket

Hello,
We have a third party application that makes HTTP connections using a old version of HTTPClient. Recently we have run into problems where the application hangs as one thread seems to hang while trying to create a socket (thread dumps show the hang occurs in native code) and other threads end up waiting for this thread as they need to obtain a lock on HTTPClient.HTTPConnection. We found out that HTTPClient was not setting a timeout on the underlying socket (SO_TIMEOUT) and the relevant patch has been implemented in the hope that if the condition arises again the offending thread will be timed out and allow other threads to try and continue.
We will not be able to see if the patch works until Monday and I would like to understand the problem a little better if it fails. My question at what point will the socket timeout starting ticking? As our offending thread is waiting in native code is there a chance that the timeout will not be "active".
Also can anyone provide reasons for an application hanging while trying to create a socket and any suggestions for monitoring or mitigating this problem?
Thanks a lot.
Sun Solaris 5.8
JDK 1.4.1 b02

It looks like our version of the JDK offer a connect method with a timeout value, I think this will do the trick.

Error while trying to create a new company

Hey All
I found an error while trying to create a new company.
the Error like - No matching Records Found - [ODBC -2028]
This can generate only database but not any tables in that database.
Please help me.
Thanking you
Hepil Doshi

Hello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J.

Getting error while trying to create the push certificate...

I am getting the following error while trying to create a push certificate for the mdm from the apple site.
Certificate Signature Verification failed because the signature is invalid.
I am mdm vendor as well as the customer. I did the following steps.
openssl x509 -inform der -in mdm_identity.cer -out mdm.pem
openssl x509 -inform der -in AppleWWDRCA.cer -out intermediate.pem
openssl x509 -inform der -in AppleIncRootCertificate.cer -out root.pem
openssl req -inform pem -outform der -in customer.csr -out customer.der
created the plist_encoded file using a java program which uses the "SHA1WthRSA"
When i tried to upload the plist_encoded file to the apple site (https://identity.apple.com/pushcert/), it creates a file with the following error
{"ErrorCode":-80018,"ErrorMessage":"Certificate Signature Verification failed","ErrorDescription":"Certificate Signature Verification failed because the <a href=\"http://www.apple.com/business/mdm\" target=\"_blank\">signature<\/a> is invalid."}
Any help would be greatly appreciated....

Please see the solution in (The Descriptive Flexfield With Application Name Receivables (AR) and Name Party Site Information (HZ_PARTY_SITES) Is Not Frozen [ID 743262.1]).
Thanks,
Hussein

Issue while trying to create Sales Order from Inbound Idoc ORDER05

Hi All,
I am trying to create a sales order through an Inbound idoc ORDERS05 created out of a Purchase order. The header pricing conditions from the Purchase orders gets populated in E1EDK05 segment and this needs to go to the Sales order header conditions while trying to create the Sales order.
But when the fields are getting incorrectly mapped to the Sales order. Issue being, the segment E1EDK05-BETRG contains the condition value. But this fields gets populated to the KOMV-KWERT (condition value) screen field on the Sales order header conditions. But this should have got mapped to field KOMV-KBETR (Rate). If I look at the Purchase order, E1EDK05-BETRG is the field getting fetched from field KOMV-KBETR on the Purchase order. So this should have correspondingly got mapped to KOMV-KBETR on the Sales order as well.
This looks like a standard behavior. But if any of you have encountered this issue before please let me know if any Correction instructions are available for the same. If this some issue in Pricing conditions configuration, do let me know.

Hi Paaavan
You can set a break-point include "FV45PFAP_VBAP_BEARBEITEN_VORBE" that is called by both the SAP Standard and BAPI where the data is prepared and checked in the internal table XVBAP. Compare both SAP standard VA01 and your 'Z' program for what may be different in XVBAP.
I think the problem my be with regards to the business_object number that is hardcoded in the standard function module. It has given me issues before and hence I tend to use the function module SD_SALESDOCUMENT_CREATE to create sales documents with.
Regards,
Marius

Bar Code entry while trying to create one through FB03

Hi Guru
We recently had techical upgrade to ECC6.0. While trying to create a barcode entry for a document through FB03 I am getting the following error message
oa280 - Bar code not active -system administration .
All the configuration are in place in OAC5,OBD2 . I couldnt able to find any relevant notes regarding to this issue . Can some one help me out in fixing this issue
Thanks
Auroar

Hi
I raised the question to SAP and they provided me the notes 173521 as suggested by you . But following this note will open bar code entry access for all user and for all accounting document which will be an issue . After few trial and error I was able to get an solution for this issue . I created an entry in oac5 with barcode active for object type and user specified and an another entry with barcode inactive for object type ,document type FIIInvoice and user . This enabled only the authorized user for bar code entry to make changes . One drawback is that it does allow permitted user for all document type
Thanks all for your suggestion
Regards
auroar

My Mac OS X does not restart while trying to update/install

My Mac OS X does not restart while trying to update/install iTunes. It allows me to click on Restart button, then just the screen saver shows up, waited 10 -15mins and nothing happens. Had to force shut to try again, same thing happens.

As a test, try opening the PDFs using Preview and see if they will print correctly from that application. If so, then it is likely an Acrobat problem. If they still don't print correctly, it is like a file problem.
You can also try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

ORA-01422: while trying to create a job

Hi all,
WE need a help from you, group of experts
we are getting the following error
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "SYS.DBMS_ISCHED", while trying to create a job using the following code
BEGIN
DBMS_SCHEDULER.create_program
(program_name => 'FAILURE_MONITOR_PRG',
program_action => 'JOB_MGR.SPR_FAILURE_MONITOR',
program_type => 'STORED_PROCEDURE',
number_of_arguments => 1,
enabled => FALSE
DBMS_SCHEDULER.define_metadata_argument
(program_name => 'FAILURE_MONITOR_PRG',
argument_position => 1,
metadata_attribute => 'EVENT_MESSAGE'
DBMS_SCHEDULER.create_job
(job_name => 'FAILURE_MONITOR_JOB',
program_name => 'FAILURE_MONITOR_PRG',
enabled => TRUE,
auto_drop => FALSE,
start_date => SYSDATE,
event_condition => 'tab.user_data.event = ''FAILED''',
queue_spec => 'event_queue'
END;
Oracle allows us to create the job if the parameter values for enabled is "false" in the DBMS_SCHEDULER.create_job call. But we got the same error
when tried to enable the job using exec DBMS_SCHEDULER.ENABLE ('FAILURE_MONITOR_JOB');
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "SYS.DBMS_ISCHED", line 2751
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1794
ORA-06512: at line 1
Please help us to solve this issue
Thanks,
Reghu
null

Hi Ravi,
Thank you for your kind support
That issue has been solved. Problem was with the event queue and only for that particular job i mentioned in the first post (I was able to create other jobs with different Events using the same queue) . After recreating the event queue i am able to create the same job. I got the same error when I tired to drop the queue, and then I dropped the queue table itself. Do you have any idea about what might had caused the issue?
Thanks
Reghu

HT201289 Aperture keeps 3.6 on Yosemite keeps going "non responsive" while trying to create a new vault or back up to an existing vault. Any help would be great.

Aperture keeps 3.6 on Yosemite keeps going "non responsive" while trying to create a new vault or back up to an existing vault.
Any help would be great.

Where is your vault stored? Is it on a drive with the correct formatting - MacOS Extended (Journaled)?

TS3297 the 'none' payment option is not displayed in the preferred payment method while trying to create an apple id?

While trying to create a new apple ID, I do not see the option of 'NONE' payment. Only the VISA and MASTERCARD options are displayed. What is the reason?

Welcome to the Apple Support Communities, Joseph
http://support.apple.com/kb/ht2534

Getting an exception while trying to create a territory

Hi All,
I got a dump while trying to create a territory using tcode crmm_terrman. The dump was in program CRM_TERRMAN_READ_EMP_OF_POS saying NO_ACTIVE_PLVAR Found Exception. Request you all to please guide me in finding the reason behind this dump.
Regards
Mandeep

Hi All,
The dump was coming because there were empty postitions created in the org structure.
Regards
Mandeep

HT1343 Restart while trying to update to OS X maverick.

Restart while trying to update to OS X maverick and it doesnt start anymore. It appears forbiden sign and the moving circle. I tried to Restart with internet recovery but after a while an atention sign appeared.

http://www.apple.com/support/mac/app-store/contact/

Error while trying to create new assignment with supervisor through API

Hi Experts,
I'am trying to create new assignment with supervisor for employee, but i'am facing this error:
=============================================================
ORA-20008: Error While Create new assignment..-20001
ORA-20001: The supervisor assignment that you have entered is invalid.
Please check that you have entered the supervisor,
that the supervisor assignment belongs to this supervisor and that the assignment is effective.
ORA-06512: at line 198
=============================================================
This is my script, (Oracle EBS 12.1.1)(DB 11):
DECLARE
v_user_id NUMBER;
v_res_id NUMBER;
v_res_appl_id NUMBER;
v_org_now_no_manager_warning BOOLEAN;
v_spp_delete_warning BOOLEAN;
v_other_manager_warning BOOLEAN;
v_tax_district_changed_warning BOOLEAN;
v_entries_changed_warning VARCHAR(4000);
v_person_id per_all_assignments_f.person_id %TYPE;
v_business_group_id hr_all_organization_units_tl.organization_id %TYPE;
v_people_group_id per_all_assignments_f.people_group_id %TYPE;
v_object_version_number per_all_assignments_f.object_version_number %TYPE;
v_special_ceiling_step_id per_all_assignments_f.special_ceiling_step_id %TYPE;
v_group_name pay_people_groups.group_name %TYPE;
v_ass_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_end_date per_all_assignments_f.effective_end_date %TYPE;
v_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_sup_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_supervisor_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_job_id per_jobs.job_id %TYPE;
v_grade_id per_grades.grade_id %TYPE;
v_location_id hr_locations_all.location_id %TYPE;
v_payroll_id pay_all_payrolls_f.payroll_id %TYPE;
v_pay_basis_id per_pay_bases.pay_basis_id %TYPE;
BEGIN
v_user_id := FND_GLOBAL.user_id ;
v_res_id := FND_GLOBAL.resp_id ;
v_res_appl_id:= FND_GLOBAL.resp_appl_id;
FND_GLOBAL.apps_initialize(v_user_id, v_res_id, v_res_appl_id);
BEGIN
SELECT organization_id
INTO v_business_group_id
FROM hr_all_organization_units_tl
WHERE name = 'Vision University'
AND language = 'US';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20000,'Error While Retrieving (Business Group ID) Info...'||SQLCODE||' '||SQLERRM);
END;
FOR R IN (SELECT * FROM xx_assignment) LOOP
BEGIN
SELECT assignment_id , ass_f.object_version_number
INTO v_assignment_id , v_object_version_number
FROM per_all_assignments_f ass_f, per_all_people_f p_f
WHERE ass_f.person_id = p_f.person_id
AND ass_f.business_group_id = p_f.business_group_id
AND ass_f.business_group_id = v_business_group_id
AND p_f.employee_number = R.employee_number
AND TRUNC(p_f.effective_start_date)= TRUNC(ass_f.effective_start_date)
AND TRUNC(p_f.effective_end_date) = TRUNC(ass_f.effective_end_date);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001,'Error While Retrieving (Assignmet_ID) for employee..'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT job_id
INTO v_job_id
FROM per_jobs
WHERE trim(lower(name)) = trim(lower(r.employee_job))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20002,'Error While Retrieving (Job_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT grade_id
INTO v_grade_id
FROM per_grades
WHERE trim(lower(name)) = trim(lower(r.employee_grade))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20003,'Error While Retrieving (Grade_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT location_id
INTO v_location_id
FROM hr_locations_all
WHERE trim(lower(description))= trim(lower(r.employee_location))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20004,'Error While Retrieving (Location_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT payroll_id
INTO v_payroll_id
FROM pay_all_payrolls_f
WHERE trim(lower(payroll_name)) = trim(lower(r.payroll_name))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20005,'Error While Retrieving (Payroll_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT pay_basis_id
INTO v_pay_basis_id
FROM per_pay_bases
WHERE trim(lower(pay_basis)) = trim(lower(r.pay_basis))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20006,'Error While Retrieving (Pay_Basis_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20007,'Error While Retrieving (Assignmet_ID) for supervisor..'||SQLCODE||' '||SQLERRM);
end;
BEGIN
hr_assignment_api.update_emp_asg_criteria(p_effective_date => TRUNC(SYSDATE),
p_datetrack_update_mode => 'CORRECTION',
p_assignment_id => v_assignment_id,
p_validate => FALSE,
p_called_from_mass_update => NULL,
p_grade_id => v_grade_id,
p_position_id => NULL,
p_job_id => v_job_id,
p_payroll_id => null,--v_payroll_id,
p_location_id => v_location_id,
p_organization_id => v_business_group_id,
p_pay_basis_id => v_pay_basis_id,
p_segment1 => NULL,
p_segment2 => NULL,
p_segment3 => NULL,
p_segment4 => NULL,
p_segment5 => NULL,
p_segment6 => NULL,
p_segment7 => NULL,
p_segment8 => NULL,
p_segment9 => NULL,
p_segment10 => NULL,
p_segment11 => NULL,
p_segment12 => NULL,
p_segment13 => NULL,
p_segment14 => NULL,
p_segment15 => NULL,
p_segment16 => NULL,
p_segment17 => NULL,
p_segment18 => NULL,
p_segment19 => NULL,
p_segment20 => NULL,
p_segment21 => NULL,
p_segment22 => NULL,
p_segment23 => NULL,
p_segment24 => NULL,
p_segment25 => NULL,
p_segment26 => NULL,
p_segment27 => NULL,
p_segment28 => NULL,
p_segment29 => NULL,
p_segment30 => NULL,
p_employment_category => NULL,
p_concat_segments => NULL,
p_grade_ladder_pgm_id => NULL,
p_supervisor_assignment_id => v_sup_assignment_id,
p_people_group_id => v_people_group_id,
p_object_version_number => v_object_version_number,
p_special_ceiling_step_id => v_special_ceiling_step_id,
p_group_name => v_group_name,
p_effective_start_date => v_ass_effective_start_date,
p_effective_end_date => v_effective_end_date,
p_org_now_no_manager_warning => v_org_now_no_manager_warning ,
p_spp_delete_warning => v_spp_delete_warning,
p_entries_changed_warning => v_entries_changed_warning,
p_tax_district_changed_warning => v_tax_district_changed_warning,
p_other_manager_warning => v_other_manager_warning);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20008,'Error While Create new assignment..'||SQLCODE||' '||SQLERRM);
END;
END LOOP;
COMMIT;
END;
Thank you & Best Regards

I think this is essentially saying that the Supervisor Assignment is wrong or no longer effective. Looking at your SQL to fetch the Supervisor Assignment there are a number of potential issues. This is what you've currently got:
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
Potential Problems/Clarifications
1. What is r.supervisor_number, what does it contain and how is it derived? I can't see that anywhere else in the block...
2. Is there a chance that r.supervisor_number is referencing an employee who has left, ie, now an ex-employee?
3. The SELECT statement that fetches the assignment_id does not perform any date-effective restrictions, which means you might be lucky enough to fetch the person's current assignment. But you might also fetch an old or future-dated assignment.
4. The SELECT statement that fetches the assignment_id does not restrict the type of assignment, so if this manager has applied for a job (ie, they have an applicant assignment) or some other type of non-employee assignment you might be picking that up.
This would work better for you:
SELECT paaf.assignment_id
INTO v_sup_assignment_id
FROM per_all_people_f papf
,per_all_assignments_f paaf
WHERE papf.employee_number = r.supervisor_number
AND papf.business_group_id = v_business_group_id
AND nvl(papf.current_employee_flag, 'N') = 'Y'
AND trunc(sysdate) BETWEEN
papf.effective_start_date AND papf.effective_end_date
AND papf.person_id = paaf.person_id
AND paaf.assignment_type = 'E'
AND paaf.primary_flag = 'Y'
AND trunc(sysdate) BETWEEN
paaf.effective_start_date AND paaf.effective_end_date;
If it doesn't return a row it means that the supervisor (or whatever employee is returned by r.supervisor_number) is not active as at sysdate and cannot be used. Note that this SQL only applies for employees. If you can have Contingent Workers as supervisors in your implementation then this needs tweaking.
Does that help?

Controller restarts while trying to create array

Similar Messages

Maybe you are looking for