Conversion exit 'PDATE' does not take an effect

Have to load the data from flat file which the document date was save in dd/mm/yyyy so I put the conversion exit 'PDATE' in transfer structure to make it convert to "YYYYMMDD"
However, it seems the conversion does not take an effect, what I found tracing simulation upload (Monitor Details) is
record in the file = 1/1/2006
record in transfer structure = 1/1/2006
record in comm structure = 06.20.11
Please advise why's it like that ?
When I test in SE37--> CONVERSION_EXIT_PDATE_INPUT , it seems the conversion works properly

Hi,
You said:"I put the conversion exit 'PDATE' in transfer structure to make it convert to "YYYYMMDD""
If you have a conversion routine assigned to the infoobject system will allow you to check the conversion .
regards,
raju

Similar Messages

Data in cell does not take effect immed

Hi I have JTable with all cells editable.
Problem is when user click on a cell and enter the data. That data does not get immediately take effect in table model unless user click on some other cell.
How can i make data immediately available when for example user click on Change button and user does not have to click on any other cell.
eg...row has 4 columns.....123....456....date....date
if user changes 123 to 321...and click on CHange button i have in panel. ..it does not take effect.....user has to click on some other cell ie eg 456 cell.....then press Change button.

in preparetable where i set the model, create columns, set renderer and editors. I even tried at the end of that method..ie added this line....still did not work....please help
public void prepairLnnTable() {
    lnnTableModel = new CellSiteLNNTableModel();
    lnnTable.setModel(lnnTableModel);
    lnnTableModel.addColumn("AAA");
    lnnTableModel.addColumn("BBB");
    lnnTableModel.addColumn("Effective From");
    lnnTableModel.addColumn("Effective To");
    ccpd6.setAllowedCharacters("0123456789");
    ccpd7.setAllowedCharacters("0123456789");
    for(int k = 0; k < lnnTableModel.getColumnCount(); k++) {
      TableColumn col = lnnTable.getColumn(lnnTableModel.getColumnName(k));
      DefaultTableCellRenderer textRenderer = new DefaultTableCellRenderer();
      JTextField textColumn = new JTextField();
      TableCellRenderer renderer = null;
//      TableCellEditor editor = null;
      if(k == CellSiteLNN.AAA) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd6);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.BBB) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd7);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_FROM) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_TO) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      col.setCellRenderer(renderer);
//      col.setCellEditor(editor);
lnnTable.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);
dFormat.setTimeZone(TimeZone.getDefault());
dFormat.setLenient(false);
}

Update 4.01 asks to update, I say yes it appears to update then in the last step it goes back up to the update center and cannot connect, the update does not take effect and it keeps asking

I allow update 4.01 to update got thru all the steps and at the last step it goes back out to the update and cannot connect, the update does not take effect.

Sign out of your account on the iPad, restart the iPad and then sign back into your account.
Settinsg>Store>Apple ID - tap the ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
After restarting go to Settings>Store and sign in again.

Podcast logo how long does it take to effect after being approved

my podcast has been approved and the Url was accessible but why my logo is not reflecting? how long does it take to effect after being approved?
https://itunes.apple.com/ca/podcast/toronto-gospel-ministries/id712382987

It can take quite a long time, but in your case your logo is now visible.

I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

What font? What system? What Glyph? What language settings? Could be anything. Either way, ask in the AI forum. You'll get quicker answers there - if you provide all the required info.
Mylenium

After doing a Google search - when I click on a link it does not take me to the corect website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?

After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?

After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?

Resizing a TIFF File: Overwriting TIFFFields does not have any effect

Hi,
I have some TIFF files that I am receiving through a FAX server. Some of the TIFF files have an image length of *1077 pixels and a DPI of 200x98*. These images open fine in generic viewers like Microsoft Image Viewer and IrfanView and the image size in the information dialog shows up fine (1752x2158). But when I open the images in a LeadTools viewer (that works off TIFF Header tags), the image appears stretched out.
I am trying to re-sample the image to make it a true Letter size image (1700x2200) with resolution of 200x200. I have been able to set the TAG_X_RESOLUTION and TAG_Y_RESOLUTION which I can see changed in the Tag Viewer. But changing the following tags does not have any effect on the resulting image:
TAG_IMAGE_WIDTH
TAG_IMAGE_LENGTH
TAG_ROWS_PER_STRIP
the following is the code I am using, I have tried all possible ways (removing TIFFFeilds and then adding them), but it has no effect. The last options is to use a Print Driver from within Java and Print the image (that re-samples it into a 8.5x11 inch image with 200 DPI). At this point, I am just curious about writing TIFFFields with images. Any ideas are appreciated:
Thanks,
Manuj
+
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.util.Iterator;
import javax.imageio.IIOImage;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.ImageWriter;
import javax.imageio.metadata.IIOMetadata;
import javax.imageio.stream.ImageInputStream;
import javax.imageio.stream.ImageOutputStream;
import org.w3c.dom.NamedNodeMap;
import org.w3c.dom.Node;
import com.sun.media.imageio.plugins.tiff.BaselineTIFFTagSet;
import com.sun.media.imageio.plugins.tiff.TIFFDirectory;
import com.sun.media.imageio.plugins.tiff.TIFFField;
import com.sun.media.imageio.plugins.tiff.TIFFImageWriteParam;
import com.sun.media.imageio.plugins.tiff.TIFFTag;
import com.sun.media.imageioimpl.plugins.tiff.TIFFT6Compressor;
               //set the input stream for to the reader
               tiffFileReader.setInput(tiffFileInputStream);
               //define the writer
               ImageWriter tiffWriter = (ImageWriter) ImageIO.getImageWritersByMIMEType("image/tiff").next();
               //define the writer param with compression;
               TIFFImageWriteParam writeParam = (TIFFImageWriteParam)tiffWriter.getDefaultWriteParam();
               TIFFT6Compressor compressor = new TIFFT6Compressor();
               writeParam.setCompressionMode(TIFFImageWriteParam.MODE_EXPLICIT);
               writeParam.setCompressionType(compressor.getCompressionType());
               writeParam.setTIFFCompressor(compressor);
               writeParam.setCompressionQuality(Float.parseFloat("1"));
// get the metaData
               IIOMetadata imageMetadata = null;
               IIOImage testImage = null;
               for(int i=0;i<filePageCount;i++)
                    imageMetadata = tiffFileReader.getImageMetadata(i);
                    TIFFDirectory dir = TIFFDirectory.createFromMetadata(imageMetadata);
          // Get {X,Y}Resolution tags.
          BaselineTIFFTagSet base = BaselineTIFFTagSet.getInstance();
          TIFFTag tagXRes = base.getTag(BaselineTIFFTagSet.TAG_X_RESOLUTION);
          TIFFTag tagYRes = base.getTag(BaselineTIFFTagSet.TAG_Y_RESOLUTION);
          TIFFTag tagImageWidth = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_WIDTH);
TIFFTag tagImageLength = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_LENGTH);
          TIFFTag tagRowsPerStrip = base.getTag(BaselineTIFFTagSet.TAG_ROWS_PER_STRIP);
          TIFFField fieldRowsPerStrip = new TIFFField(tagRowsPerStrip, TIFFTag.TIFF_SHORT, 1, (Object)new char[]{2200});
          // Create {X,Y}Resolution fields.
          TIFFField fieldXRes = new TIFFField(tagXRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
          TIFFField fieldYRes = new TIFFField(tagYRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
          // Create Width/Height fields.
          TIFFField fieldImageWidth = new TIFFField(tagImageWidth,TIFFTag.TIFF_SHORT,1, (Object)new char[]{1728});
          TIFFField fieldImageLength = new TIFFField(tagImageLength, TIFFTag.TIFF_SHORT,1, (Object)new char[]{2200});
          //TIFFTag imageLengthTag = fieldImageLength.getTag();
          // Append {X,Y}Resolution fields to directory.
          dir.addTIFFField(fieldXRes);
          dir.addTIFFField(fieldYRes);
          //add Image Length and height parameters
          dir.addTIFFField(fieldImageWidth);
          dir.addTIFFField(fieldImageLength);
          // dir.removeTIFFField(278);
          dir.addTIFFField(fieldRowsPerStrip);
testImage = new IIOImage(tiffFileReader.read(i), null, dir.getAsMetadata());
+
The resulting image with this carries the updated DPI values (200x200) but still carries the old values of 1752x1077, the length being exactly half of what Irfan view is showing.
Edited by: Manuj on Nov 2, 2010 10:48 AM

Your problem for some reason sounds familiar.
EDIT
Ok, now I remember. Your post is like this one in the old forums,
http://forums.sun.com/thread.jspa?forumID=540&threadID=5425983
Basically, for viewing purposes Irfanview scales the image's height by 2 and changes the dpi to *200x196*. It does this to achieve a 'square' pixel. The image that appears on screen now looks roughly how a printer would print it. However, the image data is still the same squished 1752x1077 image.

HS.EXP does not take into account the Value member and the source

Hello,
The formula is put in the "Entity Curr Adjs" part of the Sub Calculate.
The expression is the following and apply for one entity (Holding method) I filtered previously and the ICP Entity has proportionnal method with 50% rate:
HS.Exp "A#5420.I#[ICP None].C1#REC.C2#[None].C3#[None].C4#Recla_IAS_Aut_RetS_5=
A#5340.V#[Contribution].E#Logista_E_TBCO.I#UTE_O.C1#CLO.C2#TotC2.C3#TotC3.C4#TotC4"
The data I would like to retrieve is the one in Contribution Value as I put on the source part of the expression.
And yet, the data I get is the one of the Entity Currency and Proportion Value, which is different because the ICP has proportionnal method (50%) and the Contribution value is the result of Proportion - Elimination values.
To sum up: I obtain a data of 50 instead of 25.
I checked that the data I see in my form corresponds to the source parameters but it seems that it does not take into account the Value parameter.
Could it be that it is not possible to use a Contribution Value source for an Entity Currency Adjs destination?
Thanks in advance.
Regards,
Julien

Hi,
I see another problem in what you're trying to do. First, let me state what you're trying to establish: you are trying to get a value from one entity (say A) to another entity (say B), be it at [Proportion], [Elimination], [Contribution], ...
My question is: how can you know that during the consolidation process, by the time your code runs on B, A has already been processed and [Proportion], [Elimination] are not empty (or contain values from a previous consolidation run)?
The answer is "You don't". Theoretically, you have no control as per the order in which entities are calculated/consolidated during the process. Even more complex is the thing that if you have a multi-core machine, more than one entities may run in parallel, but still you cannot force A to run before B. I have done some tests and I've seen that in a one processor setting the order that entities enter in the process of consolidation matches the order you have placed them in the consolidation tree in metadata. Still this thing is not documented as far as I know and therefore you cannot rely on this.
Finally, I have also seen that in a simple case (B pulls from A), if you run consolidation twice, then you definitely get correct values. By the time you make a change in A, you have to run consolidation twice again to make sure that you get the correct data. I believe that you see that what I'm describing is good for experimenting but not for releasing to a client.
I tend to think of such a design, as a practice to avoid.
--Kostas

I need to reinstall my adobe creative suite 6 on a new MAC, which does not take CDs. How do I do tho

I need to install my adobe creative suite on a new MAC, which does not take CDs.
Any clues

Is your CS6 serial number for Windows or Mac? If Windows then you must apply for a platform swap to get a Mac serial number for CS6.
If you already have a CS6 Mac serial number then download CS6 from
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

Why the itunes does not take my ipod 4g

why the itunes does not take my ipod 4g

this worked for me, below.
from:
http://docs.info.apple.com/article.html?artnum=93716
Reinstall the COM interface for the iPod Service
1. Quit iTunes and any running iPod Updater.
2. Click iPodService.exe in the Windows Task Manager window.
3. Click End Process.
4. Click Yes.
5. On the Start menu, click Run. Note that the Run windows may appear behind the Windows Task Manager window.
6. Enter this text (including the quotation marks):
"C:\Program Files\iPod\bin\iPodService.exe" /service
7. Click OK in that window.
8. On the Start menu, click Turn Off Computer.
9. Click Restart.
If the iPod is not working with iTunes or the iPod Updater, proceed to the "Quick Fix" section below.

Build thumbnail image does not take AnalogBalance into account

When I build a thumbnail, it does not take AnalogBalance into account.
dng_image_preview thumbnail;
dng_render render (host, *negative);
// Build stage 2 image.
negative->BuildStage2Image (host, ttShort);
// Build stage 3 image.
negative->BuildStage3Image (host, ttShort);
render.SetFinalSpace (negative->IsMonochrome () ? dng_space_GrayGamma22::Get () : dng_space_sRGB ::Get ());
render.SetFinalPixelType (ttByte);
render.SetMaximumSize (256);
thumbnail.fImage.Reset (render.Render ());
thumbnail.fImage.Get()->Rotate( dng_orientation::Mirror90CCW() );
thumbnail.fInfo.fColorSpace = thumbnail.fImage->Planes () == 1 ? previewColorSpace_GrayGamma22 : previewColorSpace_sRGB;

The AnalogBalance is going to affect the mapping between temp/tint values and camera neutral values. If the white balance values are already stored as camera neutral values, I would not expect it to significantly change thumbnail rendering.
It sounds like you do not understand AnalogBalance correctly.

Scrubbing playhead does not show slide effects

In the Timeline and Effects windows, scrubbing the playhead or pressing the play button or the space bar does move the playhead, but the slide above does not show the effects I designated to its elements. Can you please help me with this issue? I am using a Powerbook with OS 10.9.5. Thanks.

Effects will only show when doing a real preview, not Play slide which is not a real preview; and that is what you get when scrubbing as well. In the effects panel you can use Live Preview button to
see effect.

Code does not make any effect:need help

hello friends,
now i am going to describe the problem i am phasing
actually i have embedded japplets in a jsp page(appletjsp) and want to communicate japplets indeed jsp to a servlet in the diffrent derectory but in same context root.
moreover, i have written code at applet and servlet side both. actually there is a next button in one of japplets(embedded in appletjsp) and i have written the code(for servlet communication) inside button's mouse clicked event. and at servlet side, as usual i have got an inputstream from request and want to forward this request(after getting request dispatcher) to another jsp page(proposing to display this jsp page after clicking next button inside appletjsp ).
now the problem that made me a bit confused is that when i click next button after running jsp page(containing japplets) then neither there is any error/exception at server/IE's sun java console nor any effect of code at servlet side.
actually i am not sure that the servlet side code does not make any effect rather it is ony my assumption.
although i am very new in java and as what i know, to send back response to client side, servlet class needs to be run at server side and probabbly for that there must be a sepreat request from client's applet to server(please dont flame me if i am wrong).
so please tell me how can i get running another jsp page running(to which i trying to get request dispatcher inside servlet) after clicking next button?
applet code
        try{
        String[] data    ={"santosh","kumar","tripathi"};
        String strwp ="/UASProject/RegistrationData";
        URL jspURL = new URL(getCodeBase(),strwp);
        System.out.println(jspURL);
        URLConnection jspCon = jspURL.openConnection();
        jspCon.setUseCaches(false);
        jspCon.setDoOutput(true);
        jspCon.setDoInput(false);
        jspCon.setDefaultUseCaches(false);
        jspCon.setRequestProperty("Content-Type", "application/x-java-serialized-object");
       BufferedOutputStream bos=new BufferedOutputStream( jspCon.getOutputStream());
        ObjectOutputStream oboutStream = new ObjectOutputStream(bos);
        oboutStream.writeObject(data);
        oboutStream.flush();
        bos.close();
        oboutStream.close();
     // getAppletContext().showDocument(new URL(getCodeBase().getProtocol(),getCodeBase().getHost(),getCodeBase().getPort(),"/UASProject/faces/Editpage.jsp"),"_self");
     }catch(Exception e)
       {System.out.println(e);}servlet code
         try {
                //    response.setContentType("application/x-java-serialized-object");
                     BufferedInputStream bis=new BufferedInputStream( request.getInputStream());
                    ObjectInputStream inputFromjsp = new ObjectInputStream(bis);
                    reg_data = (String[])inputFromjsp.readObject();
                    out.println(reg_data[1]);
                    bis.close();
                    inputFromjsp.close();
                   HttpSession session =request.getSession(true);
                  session.setAttribute("first_name",reg_data[0]);
                    getServletContext().getRequestDispatcher("http://localhost:8084//UASProject/faces/Editpage.jsp").forward(request,response);
               } catch (Exception e) {e.printStackTrace();}    although this topic has been made too long, even then please fix my problem.
thanks

When you formatted the system you erased everything on the harddrive, obviously, and so its just a matter of putting back the Apps and data that you want from your Backup that you made, BEFORE reformatting the harddrive. You did make a backup, didn't you??   Your Time machine or other external harddrive backup can be used with Migration Assistant to return the iLife Apps to the iMac. If he indeed purchased the iLife Apps from the App Store, then you would need to use His Apple ID account to redownload them; not yours.
Oh, and to answer your other question, no, iLife is not a part of any version of OSX itself.
Hope this helps
Message was edited by: Radiation Mac

I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

I am not able to login to my applet as the login dialog does not take the focu

In the login dialog of the applet it does allow the user to enter the password in to the field. Password field does not takes the focus. I tried with JTextfield and it is also having the same problem.
== This happened ==
Every time Firefox opened
== When in installed 3.5.9 version. It is ok with 3.0 version

Can you use the Tab key?
See also [[Pressing Tab key does not select menus or buttons]]
http://kb.mozillazine.org/accessibility.tabfocus

Conversion exit 'PDATE' does not take an effect

Similar Messages

Maybe you are looking for