Conversion from string "20041023 " to type 'Date' is not valid.

Hi ,
   I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. 
Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023  " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ? Can anyone help me with the solution.
Thanks,
Kittu

Hi Jmcmullen,
     Found one more issue on the same. I have one value like "00000000" for the column(EmpHiredate)
, when i use above expression values(ex:"20141023")
are displaying in dd/MM/yyyy format in report except value like "00000000" and giving following error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "0000/00/00" to type 'Date' is not valid.
Even i tried to pass its original value("00000000") as below but no luck.
=IIF(Fields!EmpHireDate.Value = "00000000","00000000",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Also tried this:
=IIF(Fields!EmpHireDate.Value = "00000000","2000/10/21",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Please Suggest. 
Thanks ,
Kittu

Similar Messages

  • Conversion from string "" to type 'Double' is not valid

    We're using BPC 7.5 MS and on patch level 111.02
    There's two front-end servers and one back-end.  we have about 100 users but concurrency is likely in the 50 range.
    We've been running extremely well for about 4 years but are now starting to run into problems.
    There are about 5-6 applications but none greater than 10 million records.  We optimize regularly.
    However over the past two months admin processes seem to take a lot longer.  Optimization now times out after about 1.25 hours and none used to take greater than 15 minutes.
    Today after processing dimensions we checked the application status and we were not able to check if it was available or not.  We got a pop up box saying
    conversion from string "" to type 'Double' is not valid
    I've processed dimensions and applications since and still this error persists.
    We're attempting a reboot to see if that helps but I've never seen this before and in combination with the slower admin processing I'm wondering if there's something drastic going to happen.
    Michael

    Hi Michael,
    for the poor performances you have to check the guides about performance on bpc if you have scheduled regurarly optimize during day and night (just verify that never factwb reach 50.000 and fac2 500.000 records) maybe you need to change some parameter on the server as MaxThreads.
    For the conversion string error on admin console see please this note 1803092 - Set application set status error
    Regards
         Roberto

  • Conversion from type 'CalculatedFieldWrapperImpl' to type 'Integer' is not valid._

    Hi,
    I'm using SSRS 2008 to create a relatively simple report with a stored procedure as the dataset. The SP runs fine (no errors) but when I try to run the report I get "Conversion from type 'CalculatedFieldWrapperImpl' to type 'Integer' is not valid. "
    error message. The data type is declared as int in SQL. I'm using several other int fields in the report without a problem.  Anyone familiar with this error?  Thanks.
    Robert Boccone

    Hmm, my research also suggests multi-value parameters may be the cause, but you say there aren't any in the report. These sings can sometimes be generated automatically though, even if you haven't knowingly created one. You could try checking the .rdl
    file directly (if you're using BIDS, just go to View > Code, otherwise load the report into wordpad or similar) and searching for the term 'Parameter' to see if there is anything there. Otherwise, I'm afraid I'm getting a bit lost for ideas
    too.I work to UK time. If this post, or another, answers your question, please click the 'Mark as answer' button so others with the same problem can find a solution more easily.

  • Deprecated conversion from string constant to 'char*'

    Hi all
    I am working with strings and i cant figure out why the following
    warning appears at time of build.
    warning: deprecated conversion from string constant to 'char*'
    It appears for the line
    char *myName = "Apple.txt";
    Is there anyone who can help me?
    Help is welcome.
    Thanks in advance.

    Any reason why you aren't using NSString in place of char?
    char *myName = "Apple.txt";
    NSString *myName = @"Apple.txt";

  • The Value expression used in textrun 'Textbox.Paragraphs[0].TextRuns[0]' returned a data type that is not valid.

    Hi all,
    While viewing report in SSRS 2008 i am getting an error like this
    Warning 1 [rsInvalidExpressionDataType] The Value expression used in textrun ‘Textbox21.Paragraphs[0].TextRuns[0]’ returned a data type that is not valid. 
     sotred procedure
    ALTER
     Procedure [dbo].[spGetSupervisor]
    @START_DATE
    datetime, 
    @END_DATE
    datetime, 
    @CenterID
    varchar(4000), 
    @TITLE
    varchar(100)
    =
    NULL
    as
    Select
     Distinct L1_ID SupID,
    L1_Name SupName
    from
    REF_DB.info v
    inner
    join dbo.fn_MVParam(@CenterID
    +
    P
    v
    .CenterID
    = p.Column1 
    where
    v.startdate
    <= @END_DATE
    and v.enddate
    >= @START_DATE
    and
     (v.title
    IN
    (@TITLE)
    or @title
    is
    order
     by Name
    Here is the expression in Report textbox
    =Parameters!CenterID.Label
    Please
    help me
    Thanks
    in advance
    Jyo
    null)
    ON

    Hi Jyo1105,
    Thanks for your question. Based on my research and experiences, the issue may be caused by you set the @CenterID
    is a multiple values parameter.
    If in this condition, you couldn’t use the expression of
    Parameters!CenterID.Value directly, you
    should use a join() function on the parameter to merge the whole values, or add a sequence number behind the expression to use a specific value, just like this:
    =join(Parameters! CenterID.Value) or
    =Parameters! CenterID.Value(0)
    If your issue still exsits, please feel free to let me know.
    Thanks,
    Sharp Wang
    Best Regards. Sharp Wang

  • THE DATA FROM THE ORACLE DATABASE VIEW DATA IS NOT REFERESHED AUTOMATICALLY

    THE DATA FROM THE ORACLE DATABASE VIEW DATA IS NOT REFERESHED AUTOMATICALLY IN OBIEE DASHBOARD(ANSWERS)
    UNLESS AND UNTILL I OPEN THE ORACLE BI ADMINISTRATOR TOOL AND DO UPDATE ALL ROWCOUNT AND THEN SAVE THE RPD.
    WHERE AS ORACLE DATABASE TABLE DATA IS AUTOMATICALLY REFRESHED.
    PLS SOMEONE HELP OUT IN THIS ISSUE.

    Check whether you have enable cache on that view?

  • Wage type PP10 is not valid

    When entering the prod order in CO15 screen the systems displays this eror. "Wage type PP10 is not valid for personnal number or plant (but in master data i didn't create any routing, i dont know why the system displays the error like this )
    Pls give the correct feedback
    Thanks,
    Maran.d

    Dear Maran,
    the Mssg ur getting should be a warning Mssg, not error Mssg
    in work center costing tab, just below the activity type
    there are some other fields
    i think, in ur case some of those are entered with data
    just check it
    Regards
    kumar

  • How does "Unflatten From String" take a type and return a value of that type?

    http://zone.ni.com/reference/en-XX/help/371361E-01/glang/unflatten_from_string/
    How exactly does the "type" argument for "Unflatten From String" work? I need to create a VI that takes a type, passes it as an argument to several calls of the "Unflatten From String" function, and returns an array containing elements of the type originally passed. The "Unflatten From String" function seems to do some magic though, because the type of the "value" that it outputs changes depending on the type it is passed as input. How do I do the same magic in my VI?
    Ultimately, what I need to accomplish is an unflatten-list operation. Given a type T and a byte string of length L (which contains a concatenation of T elements that are flattened to their bytes), create a VI that unflattens all the types in the string and return an array of length (L / sizeof(T)) that contains each type.
    Note: performing the unflatten-list operation is trivial, but I cannot for the life of me figure out how to do it in a VI that takes a type and returns an array of the appropriate type. By the way, my data is being given to me from another source, so please don't bother suggesting that I should be flattening an array using LabVIEW's "Flatten To String" function in the first place. My data is not given in LabVIEW's array format: http://zone.ni.com/reference/en-XX/help/371361B-01/lvconcepts/flattened_data/
    Thanks a ton!
    -Wakka

    Take a look at this example:  You can see that the flattened string contains several bytes.  The first four bytes contain the length of array (number of elements).  Since the data type is U32, the next 32 bits (4 bytes) contains the value of the first element, and so on.  Could you possibly use this scheme to do what you want to do?  Other data types present different outputs.  You would have to experiment with them.
    - tbob
    Inventor of the WORM Global

  • Movement Type data is not Showing in IW39 tcode

    Hi,
    We run the T.Code IW39 for Single Plant...Output showing correctly....
    But after select whole output, we goes in Environment --> Goods Movements path...but after this, No objects were selected..even i select all the output comes after execution...
    For other Plant, movement type data is coming.... Please help me out of this...
    Regards..

    Hi,
    'No objects were selected' status message appears when you have not selected the order against which any goods movement have taken place. may be with your other plant there are few orders against which the goods movemements have been recorded in the system.
    you can better be ensured by selecting the particular order against which goods movement have been carried out.
    Regards,
    Lucky.

  • Flash builder 4.7 upgrade issue from Flash builder 4.5 (key is not valid)

    Hi,
          We (Company) are buying Adobe products more than 6-7 years now. We bought the Flash builder premium 4.5 and Flash builder premium 4.5 for PHP volume licence. Now flash builder 4.7 should be complementary upgrade for us. But when we are using Flash builder 4.7 trial version and adding serial number (Flash builder 4.5 serial number), it's just not working and showing a error "key is not valid".
    I chat with Adobe customer care 4 different people, they end up saying that let us transfer you to volume licence department and then chat ended. No more chat messages, I checked more than one hour and still no message.
    Then I called they, it took 15 mins to connect with customer care. I picked the "upgrade" option from phone menu and then connected with a guy. After listening complete case he forwarded my call to Volume licence executive and the volume licence executive transferred it to some other guy and the other guy redirect it to some specialized person. So total 4 guys. The last guy (specialized) name was Rohit.
    This guy Rohit asked me, did I buy a customer support programme (some product about $2.nn.00 )? I said no, we bought volume licenses for Flash builder premium 4.5 ( about $4000.00 ****). He said, sorry sir I can not help you in this, but I can provide you an e-mail address and you can report your concern there. I already passed my 1.5 hour in this conversation. I said okie. He gave me a case number and told me that he will send a email mentioning that email address as per my request I disconnect the phone.
    I never get that email address.
    Can some one suggest me what to do next. My case number is : 209-788-274.
    My email is: [email protected]
    Thanks,
    Amitabh Arya

    I have the same problem, and i have send request complementary upgrade (Adobe® Flash® Builder® 4.7 Complimentary Upgrade), and only received a Acrobat change licensed...
    I´m working with 4.7 Beta the last mounths, and now all the days have to see "please enter your license". So one problem that you can jump with money (if you have that money..), isn´t a problem. Like a i have license from flex 3, upgrade to flex 4, and upgrade to flex 4.5, i´m going to take de upgrade from 4 standard to 4.7 standard (47,97 euros), and not waste my time and money on calls. So yes, I'll see adobe with another eyes...
    Best regards,
    José Ramón León

  • Displaying "N/A" in report fields where Number data is not valid using a formatting formula

    Post Author: Horizon57
    CA Forum: General
    I have many reports which are populated by "Number" data. However, there are certain charts and tables where the number data is not appropriate and the summation of such data does not add value to the report. In these instances I would like to display "N/A", however the formula I am using keeps giving me an error that I need to use a "Number" data type. Please note this is a formatting formula.
    Formatting Formula
    DO{TREND.EPTP1} = 'N/A' AND{TREND.EPTP2} = 'N/A' AND{@Trend %}    = 'N/A'  WHILE {TREND.POS2} = 'TOTAL';
    Can anyone assist me with displaying "N/A"?

    Post Author: V361
    CA Forum: General
    Try this
    DOtotext ( {TREND.EPTP1} ) = 'N/A' ANDtotext ( {TREND.EPTP2} ) = 'N/A' ANDtotext ( {@Trend %} )    = 'N/A'  WHILE {TREND.POS2} = 'TOTAL'; 

  • Display error messages in Visual Composer if Input Data is not valid

    Hi,
    We developed a small iView with a single input field FO (Factory Order).
    The output is a table with some fields corresponding to the given FO.
    My requirement is if the given FO (Factory Order) has no data then the table should not be displayed, instead a message should be displayed saying
    'No Data is found' and stop the program.
    Please reply soon if anyone has got a solution.
    Thanks,
    Shashidhar

    Hi
    You can use <b>guard condition</b> of the event to check whether input field(FO) has data or not. When the input field is empty , you can open a <b>pop-up iView</b> displaying "No Data is found" and when the input field has data , you can execute your service to produce the table output.
    If, you have any more doubts, revert back
    Thanks & Regards
    Harsimran

  • Conversion from string to Date Query.

    Hi,
    I need a way to convert a date format which is in string to a date data type.
    String is in the following format : Tue Feb 27 16:00:31 PST 2007
    Have used the SimpleDateFormat class but it returns an unparseble data error.
    Any thoughts????
    Regards
    Sam W

    Please don't crosspost: http://forum.java.sun.com/thread.jspa?threadID=5142482

  • Conversion from string to date

    hi,
    Can someone tell me how can i convert a string "09/09/02" to date ......

    HaHaHa jboeing is Sooo instructional. Yes, please to read instructions, bang head for four hours and then do this -import java.util.*;
    import java.text.*;
    public class DateTest
       public static void main(String[] args)
          String dateStr = "09/09/02";
          Date date = new Date();
          SimpleDateFormat sDF = new SimpleDateFormat("MM/dd/yy");
          try{
             date = sDF.parse(dateStr, new ParsePosition(0));
          }catch(NullPointerException npe)
          {System.out.println("bad parse");}
          java.sql.Date sqlDate = new java.sql.Date(date.getTime());
          System.out.println(date.toString());
          System.out.println(sqlDate.toString());
    }

  • Run time error message - Conversion from string "Mobile Telecommunications" to type 'Boolean' is not valid.

    I get a error message when I select an element in the combo box, please review my variables:
     Public Sector As String
        Public Index As Decimal
    ...and code
     Select Case ComboBox1.Text
                Case "Banks"
                    Sector = "Bank" And Index = -0.086
                Case "Mobile Telecommunications"
                    Sector = "Mobile Telecommunications" And Index = -0.024
                Case "Real Estate Investment Trusts"
                    Sector = "Real Estate Investment Trusts" And Index = 0.132
            End Select

    And is a boolean operator. Try it like this instead:
    Select Case ComboBox1.Text
    Case "Banks"
    Sector = "Bank"
    Index = -0.086
    Case "Mobile Telecommunications"
    Sector = "Mobile Telecommunications"
    Index = -0.024
    Case "Real Estate Investment Trusts"
    Sector = "Real Estate Investment Trusts"
    Index = 0.132
    End Select
    Still lost in code, just at a little higher level.

Maybe you are looking for