Conversion from type 'CalculatedFieldWrapperImpl' to type 'Integer' is not valid._
Hi,
I'm using SSRS 2008 to create a relatively simple report with a stored procedure as the dataset. The SP runs fine (no errors) but when I try to run the report I get "Conversion from type 'CalculatedFieldWrapperImpl' to type 'Integer' is not valid. "
error message. The data type is declared as int in SQL. I'm using several other int fields in the report without a problem. Anyone familiar with this error? Thanks.
Robert Boccone
Hmm, my research also suggests multi-value parameters may be the cause, but you say there aren't any in the report. These sings can sometimes be generated automatically though, even if you haven't knowingly created one. You could try checking the .rdl
file directly (if you're using BIDS, just go to View > Code, otherwise load the report into wordpad or similar) and searching for the term 'Parameter' to see if there is anything there. Otherwise, I'm afraid I'm getting a bit lost for ideas
too.I work to UK time. If this post, or another, answers your question, please click the 'Mark as answer' button so others with the same problem can find a solution more easily.
Similar Messages
-
Conversion from string "20041023 " to type 'Date' is not valid.
Hi ,
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report.
Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ? Can anyone help me with the solution.
Thanks,
KittuHi Jmcmullen,
Found one more issue on the same. I have one value like "00000000" for the column(EmpHiredate)
, when i use above expression values(ex:"20141023")
are displaying in dd/MM/yyyy format in report except value like "00000000" and giving following error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "0000/00/00" to type 'Date' is not valid.
Even i tried to pass its original value("00000000") as below but no luck.
=IIF(Fields!EmpHireDate.Value = "00000000","00000000",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Also tried this:
=IIF(Fields!EmpHireDate.Value = "00000000","2000/10/21",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Please Suggest.
Thanks ,
Kittu -
Hi, what should I do if I have this problem,
Install Adobe Flash Player quit unexpectedly, and this is from the Problem Report,
terminating with uncaught exception of type std::logic_error: basic_string::_S_construct NULL not validHi viktoriat6208079,
What does "it is not worked out." mean? What happens when you use the offline installer?
To modify how your name displays in the forums:
Go to your profile by clicking on the avatar in the upper right, alternatively, click on your username/name link
Then select Actions > Edit Communities Profile
In the next window, click on Privacy
The Privacy tab contains numerous options, one is how your name displays in the forums. If you select "Yourself" then only you can see your name.
Maria -
Power View in SharePoint Server - The data extension type for a data source is not valid
Hi All,
All of a sudden I am getting following error when trying to create Power View report using shared report data source (no error testing the connection):
"The current action cannot be completed. The data extension type for a data source
'http://dev/Shared Ducuments/Sales.rsds' is not valid for this operation"
I already have a data source (I had created it after creating my site collection a week ago) and when I use this source to create Power View report then there is no error but I am getting above error when I create another similar data source and use it to create
a Power View report.
Please help me to resolve the error.
ThanksI am going nuts! I had selected 'Analysis Services' instead of 'Microsoft BI Semantic Model for Power View'
-
Flash builder 4.7 upgrade issue from Flash builder 4.5 (key is not valid)
Hi,
We (Company) are buying Adobe products more than 6-7 years now. We bought the Flash builder premium 4.5 and Flash builder premium 4.5 for PHP volume licence. Now flash builder 4.7 should be complementary upgrade for us. But when we are using Flash builder 4.7 trial version and adding serial number (Flash builder 4.5 serial number), it's just not working and showing a error "key is not valid".
I chat with Adobe customer care 4 different people, they end up saying that let us transfer you to volume licence department and then chat ended. No more chat messages, I checked more than one hour and still no message.
Then I called they, it took 15 mins to connect with customer care. I picked the "upgrade" option from phone menu and then connected with a guy. After listening complete case he forwarded my call to Volume licence executive and the volume licence executive transferred it to some other guy and the other guy redirect it to some specialized person. So total 4 guys. The last guy (specialized) name was Rohit.
This guy Rohit asked me, did I buy a customer support programme (some product about $2.nn.00 )? I said no, we bought volume licenses for Flash builder premium 4.5 ( about $4000.00 ****). He said, sorry sir I can not help you in this, but I can provide you an e-mail address and you can report your concern there. I already passed my 1.5 hour in this conversation. I said okie. He gave me a case number and told me that he will send a email mentioning that email address as per my request I disconnect the phone.
I never get that email address.
Can some one suggest me what to do next. My case number is : 209-788-274.
My email is: [email protected]
Thanks,
Amitabh AryaI have the same problem, and i have send request complementary upgrade (Adobe® Flash® Builder® 4.7 Complimentary Upgrade), and only received a Acrobat change licensed...
I´m working with 4.7 Beta the last mounths, and now all the days have to see "please enter your license". So one problem that you can jump with money (if you have that money..), isn´t a problem. Like a i have license from flex 3, upgrade to flex 4, and upgrade to flex 4.5, i´m going to take de upgrade from 4 standard to 4.7 standard (47,97 euros), and not waste my time and money on calls. So yes, I'll see adobe with another eyes...
Best regards,
José Ramón León -
Why is conversion from array/vector of chars to jcharArray not working?
This really is an array/vector of chars, not a string (i.e. not a char* string).
jcharArray convert(JNIEnv* env, const std:vector<char> vect)
int size = vect.size();
jcharArray arr = env->NewCharArray( size );
env->SetCharArrayRegion( arr, 0, size, ( jchar * ) &( vect[ 0 ] ) );
return arr;
}It returns garble to Java instead of the characters put into the vector. What am I doing wrong?Presumably you have some reason to think that vect[ 0 ] is going to represent a contigous memory segement for the rest of the characters.
A java "char" and C "char" are not the same size. -
Conversion from u0091Stringu0092 to type u0091Dateu0092
Hi,
I am fetching a date from DeliveryDate TextBox from Sales Order. I enter as 10/03/2007. As I need to fetch this value and store it in Production Order DueDate records through SDK Code.When I fetch this value from code,I get as 20070310. When I try to update my Production Order DueDate it gives me an Error Msgbox Conversion from string 20070310 to type Date is not valid. Here is my code to update production order.
Dim DelDt As String
DelDt = MyForm.Items.Item("12").Specific.value
Here DelDt shows 20070310
Now I have created an object of ProductionOrder and try to add Records,
sboProdOrder.DueDate = DelDt
On the above line it gives me that messagebox.
Can any one help me as to how can I convert this code in a working one or how to convert the string to date in VB.Net
Thanks a lot
MurtazaHi Murtuza,
Retrieving the value from a date-field through the value always returns the date as a string in the format yyyymmdd.
the field DueDate is a field of type DateTime.Date. to enter the date in this field, you must convert the string to a date.
The following line converts the date-string to a date.
new DateTime.Date(left(DelDt,4), mid(DelDt,5,2), right(DelDt,2))
Regards
Ad -
IMessage, Start new conversations from number missing?
I sign in with my Apple-ID. But then apperienlty you can choose which you will start new conversations from, hotmail or number, but that does not appear for me? Settings ---> Messages ---> Send and recieve. PLEASE HELP ME
This worked for me. Turn off iMessage in Settings---> Messages. Then turn off iPhone. Restart iPhone then turn iMessage back on. The phone number should reappear.
-
Disallowed implicit conversion from data type datetime to data type timestamp
Received error: [Macromedia][SQLServer JDBC
Driver][SQLServer]Disallowed implicit conversion from data type
datetime to data type timestamp, table 'myTbl', column 'duration'.
Use the CONVERT function to run this query.
I have a field named duration hh:mm:ss.lll that I am trying
to insert into MS SQL. DB has field defined as [duration]
[timestamp] NOT NULL,
My insert has this: INSERT INTO myTbl( duration) VALUES(
<cfqueryparam value="2006-05-26 11:12:13"
cfsqltype="CF_SQL_TIMESTAMP"/> )
Why does this not work? rrrrrrrrrrrrrr! BTW: also tried with
seconds as 13.111 which did not work. Does the db duration need to
be date? I just want to store a duration for the time of a movie...
10 Qquote:
Originally posted by:
quiet1
Received error: [Macromedia][SQLServer JDBC
Driver][SQLServer]Disallowed implicit conversion from data type
datetime to data type timestamp, table 'myTbl', column 'duration'.
Use the CONVERT function to run this query.
I have a field named duration hh:mm:ss.lll that I am trying
to insert into MS SQL. DB has field defined as [duration]
[timestamp] NOT NULL,
My insert has this: INSERT INTO myTbl( duration) VALUES(
<cfqueryparam value="2006-05-26 11:12:13"
cfsqltype="CF_SQL_TIMESTAMP"/> )
Why does this not work? rrrrrrrrrrrrrr! BTW: also tried with
seconds as 13.111 which did not work. Does the db duration need to
be date? I just want to store a duration for the time of a movie...
10 Q
Duration as a timestamp? How odd, most people would store it
as an integer. Or, if you want to build your own string, the syntax
is {ts 'yyyy-mm-dd hh:mm:ss'}. The seconds might not be required.
In any event, use createodbcdatetime() for the value you want
to put into your table. -
Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?
I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences
-
Short dump: Conversion from type 'c' to 'v' not possible
Hi,
When do we get the following error? 'Conversion from type "c" to "v" not possible'.
I am getting this dump when I try to assign a structure to a field symbol.
This is happening only for a specific structure type.
Thanks in advance,
Regards,
WenonahHi,
type - v is Structure with internal table , deep structure....
u might have declared the field-symbol as a typed one.....
Declaring it a generic one like type any as suggested in above post might solve the problem.....
Cheers,
Jose -
Implicit Conversion from data type sql_variant to datetime is not allowed.
Getting a odd error. This code was working perfectly before a SQLServer upgrade.
The linked database is working, I'm able to pull up data from it in separate queries just fine.
I'm getting the following error.
Implicit conversion from data type sql_variant to datetime is not allowed. Use the CONVERT function to run this query.
Invalid column name 'TotalDay'. (.Net SqlClient Data Provider)
can anyone spot the issue? I've tried sever variations of the same code, but still get the same thing.
If I put this section in a query by it self it works just fine.
( DATEDIFF(ss,
CONVERT(VARCHAR(10),( SELECT TOP ( 1 )
TimeDate
FROM [nav].AcsLog.dbo.EvnLog AS X3
WHERE UDF2 = E.No_
AND CONVERT(VARCHAR(10), X3.TimeDate, 101) = CONVERT(VARCHAR(10), @sdate, 101)
ORDER BY TimeDate ASC
),101),
CONVERT(VARCHAR(10),( SELECT TOP ( 1 )
TimeDate
FROM [nav].AcsLog.dbo.EvnLog AS X4
WHERE UDF2 = E.No_
AND CONVERT(VARCHAR(10), X4.TimeDate, 101) = CONVERT(VARCHAR(10), @sdate, 101)
ORDER BY TimeDate DESC
),101)) ) AS TotalDayBadge ,>ANDCONVERT(VARCHAR(10),X3.TimeDate,101)=CONVERT(VARCHAR(10),@sdate,101)
It is not a good idea to use string dates for predicates in WHERE clauses.
Use DATETIME or DATE in predicates.
If you are not interested in the time part of DATETIME, use DATE datatype.
Example:
SELECT CONVERT(DATE, getdate());
-- 2014-08-25
Datetime conversions:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Between dates:
http://www.sqlusa.com/bestpractices2008/between-dates/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Conversion from string "" to type 'Double' is not valid
We're using BPC 7.5 MS and on patch level 111.02
There's two front-end servers and one back-end. we have about 100 users but concurrency is likely in the 50 range.
We've been running extremely well for about 4 years but are now starting to run into problems.
There are about 5-6 applications but none greater than 10 million records. We optimize regularly.
However over the past two months admin processes seem to take a lot longer. Optimization now times out after about 1.25 hours and none used to take greater than 15 minutes.
Today after processing dimensions we checked the application status and we were not able to check if it was available or not. We got a pop up box saying
conversion from string "" to type 'Double' is not valid
I've processed dimensions and applications since and still this error persists.
We're attempting a reboot to see if that helps but I've never seen this before and in combination with the slower admin processing I'm wondering if there's something drastic going to happen.
MichaelHi Michael,
for the poor performances you have to check the guides about performance on bpc if you have scheduled regurarly optimize during day and night (just verify that never factwb reach 50.000 and fac2 500.000 records) maybe you need to change some parameter on the server as MaxThreads.
For the conversion string error on admin console see please this note 1803092 - Set application set status error
Regards
Roberto -
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value
I am trying to insert records into a temporary table with date values concatenated with other string values into one large string value.I am getting the following error:
Msg 242, Level 16, State 3, Line 12
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Msg 241, Level 16, State 1, Line 28
Conversion failed when converting date and/or time from character string.
-My code below
Declare
@hdrLOCAL char(255),
@CR char(255),
@BLDCHKDT DATETIME,
@BLDCHTIME DATETIME,
@hdrline int
SELECT @hdrLOCAL = DDLINE FROM DD40400 WHERE INDXLONG =1
SELECT @CR = DDLINE FROM DD40400 WHERE INDXLONG =2
SELECT @hdrline =1
SELECT
@BLDCHKDT = CONVERT(varchar(20),T756.PAYDATE,105) ,
-- convert(varchar,getdate(),15)
@BLDCHTIME= CONVERT(varchar(20),T756.PAYDATE,105)
FROM STATS.dbo.DD10500 T762
LEFT OUTER JOIN STATS.dbo.DD10400 T756 ON (
T762.INDXLONG = T756.INDXLONG
AND T756.INCLPYMT = 1
WHERE (T756.INCLPYMT = 1)
AND (T762.DDAMTDLR <> 0)
Create TABLE [dbo].[##DD10200B](
[INDXLONG] [int] NOT NULL,
[DDLINE] [varchar](8000) NOT NULL,
[DEX_ROW_ID] [int] IDENTITY(1,1) NOT NULL,
BEGIN
INSERT INTO ##DD10200B (INDXLONG,DDLINE)
VALUES (1,@hdrLOCAL +',' + @CR +','+ @BLDCHKDT +',' + @BLDCHTIME )
END
Msg 242, Level 16, State 3, Line 12
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Msg 241, Level 16, State 1, Line 28
Conversion failed when converting date and/or time from character string.
The Best thing in Life is LifeSince the Variable
BLDCHKDT and BLDCHTIME are of type date time why are you trying to assign it a value
of type varchar
and the format 105 gives you dd-mm-yyyy but SQL server takes the default format as mm-dd-yyyy so the error occurs for all dates that
are greater than 12
try the below code
Declare
@hdrLOCAL char(255),
@CR char(255),
@BLDCHKDT Varchar(50),
@BLDCHTIME Varchar(50),
@hdrline int
SELECT @hdrLOCAL = DDLINE FROM DD40400 WHERE INDXLONG =1
SELECT @CR = DDLINE FROM DD40400 WHERE INDXLONG =2
SELECT @hdrline =1
SELECT
@BLDCHKDT = CONVERT(varchar(20),T756.PAYDATE,105) ,
-- convert(varchar,getdate(),15)
@BLDCHTIME= CONVERT(varchar(20),T756.PAYDATE,105)
FROM STATS.dbo.DD10500 T762
LEFT OUTER JOIN STATS.dbo.DD10400 T756 ON (
T762.INDXLONG = T756.INDXLONG
AND T756.INCLPYMT = 1
WHERE (T756.INCLPYMT = 1)
AND (T762.DDAMTDLR <> 0)
Create TABLE [dbo].[##DD10200B](
[INDXLONG] [int] NOT NULL,
[DDLINE] [varchar](8000) NOT NULL,
[DEX_ROW_ID] [int] IDENTITY(1,1) NOT NULL,
BEGIN
INSERT INTO ##DD10200B (INDXLONG,DDLINE)
VALUES (1,@hdrLOCAL +',' + @CR +','+ @BLDCHKDT +',' + @BLDCHTIME )
END
the only change done is
@BLDCHKDT Varchar(50),
@BLDCHTIME Varchar(50),
Surender Singh Bhadauria
My Blog -
Below select statement results in "The conversion of a nvarchar data type to a datetime data type resulted in an out of range value" error. By the way Terms
field's data type is nvarchar
SELECT * from INVOICE
where convert(datetime,Terms)
BETWEEN
'01/01/14'
and
'01/30/15'If you can't use TRY_CONVERT (It's only available in 2012+) You should be able to validate the data with something like this (based on your example date formats):
DECLARE @notDate TABLE (Terms NVARCHAR(10))
INSERT INTO @notDate (Terms) VALUES
('01/01/14'),('02/29/14'),('01/32/15'),('13/13/14'),('13/3/14'),('13-13/14'),('02/29/12'),('02/29/13')
SELECT *,
CASE WHEN (LEN(Terms) - 2) <> LEN(REPLACE(Terms,'/','')) OR LEN(Terms) <> 8 THEN 'Bad Form'
WHEN LEFT(Terms,2) > 12 THEN 'Bad Month'
WHEN LEFT(Terms,2) IN (9,4,6,11) AND LEFT(RIGHT(Terms,5),2) > '30' THEN 'Bad Day'
WHEN LEFT(Terms,2) = 2 AND LEFT(RIGHT(Terms,5),2) > (28 + CASE WHEN (2000+RIGHT(Terms,2)) % 400 = 0 THEN 1 WHEN (2000+RIGHT(Terms,2)) % 100 = 0 THEN 0 WHEN (2000+RIGHT(Terms,2)) % 4 = 0 THEN 1 ELSE 0 END) THEN 'Bad Day'
WHEN LEFT(Terms,2) NOT IN (2,9,4,6,11) AND LEFT(RIGHT(Terms,5),2) > '31' THEN 'Bad Day'
END
FROM @notDate
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.
Maybe you are looking for
-
For anyone still having activesync or battery problems I have a potential fix: I've had two issues lately. First, my battery life was draining at an insane rate. iPhone5 lasted about 3-4 hours before absolutely dead from a full charge. LTE disable
-
Problems installing Oracle 9i R2 on IBM AIX 5L V3 (server IBM p5 570)
Hi all, Sorry for my bad englsih! I have problem with installing oracle 9i R2 During Linking Oracle 9i Database Error : Error in invoking target install of makefile /u01/app/oracle/product/9.2.0/rdbms/lib/ins_rdms.mk. Thank you. $ oslevel -r 5300-03
-
Multiple Image File Upload for Creating Weblogs
Maybe I just like pretty pictures more than most webloggers; but it seems like I spend a heck of a lot of time uploading images for my weblogs to SDN. It would great if there was an easier way to do this. Perhaps something as simple as uploading mo
-
No audio while scrubbing video in event library in iMovie 10
I just began making my first film with the new iMovie 10 and I have no audio while scrubbing the video event library screen. The audio plays fine when I just have it play in the event library but it vanishes when I scrub which makes it difficult to f
-
Twitter and Facebook in Notification Centre
On the new iphone 5, how do I get the "Tap to Tweet" and "Tap to Post" tabs on the Notification centre page? I am signed in on the accounts. (See page 28 of the user guide)