Convert .mp4 to .flv with centre screen play arrow

This has to be simple to do, but I can't find instruction to do it. My .mp4 file is 480x270 pixel, and the clip is about 12 seconds long. If any one could help me out. thx

you can use adobe media encoder to convert your mp4 to an flv.
to play your flv, add an flvplayback component to your stage, select no skin for your player, assign your player an instance name (eg, flv_pb), create a large button in the center of the player and assign it a name (eg, large_btn) and use:
large_btn.addEventListener(MouseEvent.CLICK,playF);
function playF(e:Event):void{
flv_pb.source="path/filename of your flv";
removeChild(large_btn);

Similar Messages

  • Converting mp4 to flv with AME - audio is out of sync

    I am trying to convert an .mp4 file to an .flv (cropping it at the same time) using AME. The file crops and converts without error but when I play my .flv file the audio is not in sync.
    The audio is playing slower than the original mp4, but the video speed still matches the source file.
    Does anyone have any suggestions on what might be causing this?
    Here are my settings and operating system:
    Source Settings:
    1920x1080, 15 fps, Progressive, 00;02;20;12
    22050 Hz, Mono
    Output Settings:
    1644x1004, Same as source fps, Progressive
    MPEG Layer III (MP3), 256 kpps, Mono
    CBR, 1 Pass, Target 6977.80 kpps
    Windows 7 Enterprise
    Thanks!

    If you provide video file details, someone may be able to help
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Are you 100% sure that your editing sequence matches your video file... such as by using the New Item process?

  • Converting MP4 to FLV - Getting White Screen

    I was sent an MP4 video that I have to convert to a Flash video.
    The video keeps encoding with audio, but no picture. All I get is a white screen.
    I have encoded Flash videos before and have not had this problem.
    What do I do from here? Thanks in advance...
    I read on one board that I should change the extension from MP4 to MPG, but that didn't help.

    Hmmm...so you encode the mp4 and it generates an flv, right?
    And then in Flash (I'm just thinking out loud here) you create a
    new fla, import -> video and choose the flv and it walks you
    through the process where you select 'streaming from server' and
    the player skin, etc. and then it places the flv instance on stage
    in the fla.
    Then you can fiddle with the stage dimensions, publish it,
    and once you upload the flv, the swf with the flv as a parameter,
    the swf for the player skin, the .js file and the html file to the
    server you should be able to play the video.
    If you've done all that, I guess the next question would be
    whether you've tried it with another format, like an .avi or
    something else.
    Sean

  • Adobe Media Encoder CS4 converting mp4 to FLV

    Hi,
    First up why is there no forum for Adobe Media Encoder CS4?
    My issue is whith converting MP4 to flv.
    The video is added to the que.
    Problem is no video picture is shown, during the convert process.
    When I go into setting and move the play head along the timeline no video is shown.
    The video was generated using Apple's HD iMovie.
    All setting are on default.
    Can someone please help.
    Why is source video has no picture. If I do encode to flv I just get the audion
    Does Adobe have some problem with MP4 created by Apple HD Movie?
    Regards,
    Simon

    well im guessing or atleast hoping you 3 who posted on here got it sorted out by now but thought id post on here to help anybody who has the same problem in the future.i had the same problem and after searching a few different forums i found that mp4's are a bit troublesome when converting them.apparently a good way to get around it is opening the mp4 in quicktimepro  and then exporting it as an flv.i dont know if its that simple but i dont have quicktimepro anyway so i couldnt do it.
    but here is what i did- i uploaded my video to youtube.
    then using     keepvid.com   i downloaded it from youtube as an flv file.(you have the choice of a few different file types)
    now it works in my flash perfectly.
    hope it helps somebody and if anybody knows an easier way (there must be one) please let me know
    cheers
    terry

  • Convert MP4 to FLV (for integration on timeline Flash Pro.)

    Hello guys,
    I'm having trouble converting MP4 to FLV file, after this latest update seems to me that it was discontinued this type of conversion formats of videos.
    need to convert a mp4 to flv videos and integrate the timeline in Flash Professional.

    See this for an explanation for the change regarding FLV and F4V and for the recommended workflow:
    removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro

  • How to convert .mp4 or .flv to mp3?

    I've been searching for Mac software that lets me convert mp4 or flv files to mp3, but I can't seem to find any at all. I know of some that work on windows, but since I have a macbook pro I want a program that works on it.
    It doesn't have to be free, I don't mind paying for the software if it actually works...So if anyone knows of anything please let me know. Thanks in advance!

    I use iSquint to convert the .flv to .mp4.
    Then AudioExtract to rip the audio off (in AIFF format).
    I add the new file to iTunes and convert it to .mp3, sometimes.
    It's all freeware, but it'll ask you every time to donate or purchase.
    There are no restrictions on iSquint.
    There is a 3 file limit on AudioExtract. But all you have to do is quit after the first one and open it again.
    Before I had AudioExtract, I'd import the .mp4 into iMovie and put in in a movie file and extract audio that way.

  • Converting MP4 to FLV

    Hi,
    I posted this in the Flash Encoder forum a few days ago, but
    haven't gotten any responses. So I'm hoping someone here might
    know.
    I'm trying to take a MP4 file, and convert it to a .flv to
    use on our Intranet.
    When I open Flash Encoder, I select the .MP4 and settings in
    Encoder are
    Flash 8 Medium Quality (400kbs)
    It goes through the process of converting the file, and saves
    a .flv.
    but when I try and view the .flv I can double click on it and
    it opens Flash Player 9 and I get nothing but a white screen. All
    the controls in the control menu are shaded out.
    If I try and insert the file into a page within dreamweaver
    and upload everything to the server, I still get nothing.
    So it seems the conversion from MP4 to .flv is not working
    correctly.
    Before I encode it, if I go into the settings area of Flash
    Encoder, and move the timeline I can see the frames of the video.
    So I'm assuming the MP4 is not the problem.
    Is there something else I need to do?
    Thanks.

    Hmmm...so you encode the mp4 and it generates an flv, right?
    And then in Flash (I'm just thinking out loud here) you create a
    new fla, import -> video and choose the flv and it walks you
    through the process where you select 'streaming from server' and
    the player skin, etc. and then it places the flv instance on stage
    in the fla.
    Then you can fiddle with the stage dimensions, publish it,
    and once you upload the flv, the swf with the flv as a parameter,
    the swf for the player skin, the .js file and the html file to the
    server you should be able to play the video.
    If you've done all that, I guess the next question would be
    whether you've tried it with another format, like an .avi or
    something else.
    Sean

  • Adobe Media Encoder CS4, converting mp4 to flv - seriously drifting sync

    (Not sure this is the right forum for this - I didn't see a forum for AME but it's being used in conjunction with Flash)
    I've  been trying to convert a 2:54 mp4 to flv, and when I'm done, when  playing the resulting flv it tells me it's now 3:37. Of course the audio  runs out at 2:54 so I have half a minute of silence.
    The mp4 was ripped from DVD using HandBrake.
    I  tried converting using a couple of different presets and keep getting  the same result. I can't seem to locate any sort of "keep video locked  to audio" option in AME CS4.
    Maybe it's a frame rate  issue? I'm not sure how to determine the frame rate of the original, but  the DVD is a burn from the video house that produced the video - US  format. So probably 29.97?
    Help!
    - Bob

    Well that did work. Unfortunately Viddler turned the previously 16 x 9 video into 4 x 3. Not sure why - found a thread there where they suggest this could happen if exported from a Mac. My source was ripped from a DVD (though it may have originated on a Mac).
    So now we're just linking to it on YouTube. Crappy solution but best I'm going to get under the circumstances.
    Thanks for the suggestion.

  • Can't convert MP4 to .fLV for flash using encoder CC 2014

    Hi
    Seriously adobe, I wish I never upgraded to CC, it's been a nightmare.
    I need to convert an MP4 to an .flv for flash pro CC. Encoder CC no longer supports this, which is UNBELIEVABLE....
    I use a third party vendor for video in flash banner advertising and it only supports .flv files.
    Can someone tell me what other programs allow me to so the MP4 to FLV conversion?

    > Can someone tell me what other programs allow me to so the MP4 to FLV conversion?
    The previous version of Adobe Media Encoder or After Effects, which you can have installed alongside the current version:
    removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro

  • Converting swf to flv with flash video encoder

    Hi...
    I have a couple of questions please... I have managed to put some captions on a video file and would now need to get this video back into flv format to put it online;..I tried with the cs3 video encoder but it wouldn't let me.... So my questions are:
    1. Is it actually possible to convert my swf file into flv with cs3 video encoder ...which would be logical as it is a flash file...
    2. What is the best option I Have to convert my swf file with captions without losing the captions...
    Many thans for any clear help as I am not a code guru....
    Regards
    Flav

    Hi Vlaf (Flav),
    the main thing for converting a flash swf into a flv is to make sure that the timeline is not embeded inside a moveclip (meaning that the timeline of the movie is on the MAIN timeline....and not nested somewhere else.
    if this is right, then it should export correctly. If it still fails with the Encoder....try an alterative encoder caller "Super"(its free)...and does a great job!
    unless specified by your client or target advert host, always try to use a minimum of 30 frames per second and you should be good to go.

  • Converted mp4 to flv plays really fast

    Hello,
    I converted a 256MB mp4 video to flv using ame.  I lowered the bit rate a little bit as our users are mostly on dsl.  This is for use in a adobe connect session.  Now in adobe media player, the video is greatly speeded up playing in about 5 seconds.
    What can I do?  Thank you for any assistance, Mary

    It turns out this problem only occurs on one Mac computer,
    out of all the 5 machines I'm testing on. Unfortunately, my main
    workstation...

  • Convert mp4 to edit with

    What would be best settings to get an MP4 into an editable form that Final Cut can handle ?

    I suggest you use StreamClip. It's free to download and will convert your files into DV. You will, however, also have to conver the audio to .aiffs because Final Cut does not like the DV audio out of StreamClip. Not sure why.
    There are quite a few posts about this on the Final Cut forum too.
    Hope that helps.
    ~Luke

  • OS X Yosemite 10.10.1 Boots with black screen, white arrow cursor, no menu or icons therefore no control.

    OS X Yosemite 10.10.1 Mac Book Pro.  Won't power up to show menus or icons.  Completely black screen with useless cursor and nothing to click on.  cn't run any diagnostics.

    What do you mean by "Installer CD does nothing?"
    Booting From An OS X Installer Disc
    1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
    lease posted the link for using safe mode. Try clicking on it.

  • How to convert MP4?

    Emicsoft MP4 Converter for Mac can convert from MP4 to other video/audio formats on mac os x. With this Mac MP4 Converter, you are able to convert MP4 to AVI, MP4 to FLV, MP4 to MPEG and also to more popular formats such as MOD, TOD, MKV, WMV, DivX, XviD, MOV, MPEG1/2, 3GP, VOB, HD MP4, HD MOV, HD AVI, HD MP4, etc. Emicsoft MP4 Converter for Mac also can help you extract audio track from MP4 video to MP3, WMA, WAV, AAC, AC3 and so on.
    How to convert MP4 Mac?
    1. Click "Add File" button to load video file to the mp4 converter for mac.
    2. Click "Effect" "Trim" and "Crop" button to edit the video file.
    3. Set output profile and destination folder for the output file.
    4. Start conversion by clicking "Start" button.
    Now, it is no longer a problem to convert mp4 on Mac os x. Users can take full advantage of this Emicsoft MP4 Converter for Mac and create unique videos at ease.
    Emicsoft MKV Converter for Mac supports converting from MKV to all popular video and audio formats including MPEG-4, AVI, DivX, XviD, MOD, FLV, WMV, 3GP, MOV, HD video and MP3, WMA, WAV, AAC, AC3, etc. This outstanding mac MKV converter os x works to convert MKV and convert to MKV reversely. Another attracted feature is to convert MKV to iPod, iPhone, Apple TV, PSP, PS3, Zune and more multimedia devices.
    Emicsoft MTS Converter for Mac is an featured Mac AVCHD MTS video Converter. MTS Converter OS X is a macintosh software that help convert Mac MTS videos to other Mac video and audio formats such as MP4, M4V, MOV, QuickTime format, FLV, AVI, 3GP, MPG, MPEG2, MPEG1, MP3, WAV, AC3, OGG and APE.

    Why Convert MP4 to MP3?
    Reason one: Some old music players don't support MP4 format  but are compatible with MP3 format, so people have to extract the audio  tracks from MP4 clips and then save them as MP3.
    Reason two: People are intent to DIY a video. To use the music from one video in another video, they need to extract audio from video.
    Reason three: Download a video in MP4 format but only want the audio of the video.
    Here is a step by step guide to help you convert MP4 to MP3 with 30X faster speed and high output quality at: Convert MP4 to MP3

  • Creating a FLV video player with full screen option

    > This message is in MIME format. Since your mail reader
    does not understand
    this format, some or all of this message may not be legible.
    --B_3258016930_5977304
    Content-type: text/plain;
    charset="ISO-8859-1"
    Content-transfer-encoding: 8bit
    Hi!
    I am trying to create a video player that will allow full
    screen functions
    like what we can see on youtube. I know how to create the
    window and the pop
    up but the only problem I am having is having the original
    video in the
    small screen to pause or go silent when the full screen mode
    is activated.
    How can get it done?
    Thank you.
    °K.
    --B_3258016930_5977304
    Content-type: text/html;
    charset="ISO-8859-1"
    Content-transfer-encoding: quoted-printable
    <HTML>
    <HEAD>
    <TITLE>Creating a FLV video player with full screen
    option</TITLE>
    </HEAD>
    <BODY>
    <FONT FACE=3D"Arial"><SPAN
    STYLE=3D'font-size:12.0px'>Hi!<BR>
    <BR>
    <BR>
    I am trying to create a video player that will allow full
    screen functions =
    like what we can see on youtube. I know how to create the
    window and the pop=
    up but the only problem I am having is having the original
    video in the sma=
    ll screen to pause or go silent when the full screen mode is
    activated. How =
    can get it done?<BR>
    <BR>
    Thank you.<BR>
    <BR>
    <BR>
    <B>&deg;K.<BR>
    </B> </SPAN></FONT>
    </BODY>
    </HTML>
    --B_3258016930_5977304--

    Hello,
    You should ask in the
    Windows Phone forums on the Microsoft Community forums.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Maybe you are looking for