Convert Quantity values in MB5B -Regional Units

Hi,
Recently we went go live with Canada and our base unit of measure is in LBS.
Whats the Optimum way to show quantities in their own regional units like KG's and Litres?
User exits?
Writing a Z report?
Configuration?
Other way?
As we have few other standard reports we want to research a bit before taking a decision.
Any ideas?
Regards
Praveen
Message was edited by:
        PRAVEEN s

Hi dear,
and welcome on board!
I think it's better to create a new KF with your desired format and feed it in the update rules (better than modify the std one!)...
Bye,
ROberto
(and please don't forget to assign some points to the answers...it's THE way to say thanks here...)

Similar Messages

  • How to convert Quantity in one unit to another

    My Requirement is to convert Quantity(kwmeng field)in one unit (UOM) say B01,D01 to KG's...Is there any function module
    to do this.
    any pointers on this would be very helpful
    Thanks

    Try function modules like [MD_CONVERT_MATERIAL_UNIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=md_convert_material_unit&adv=false&sortby=cm_rnd_rankvalue].
    Regards

  • Convert quantity in one unit to quantity in another unit

    Hi all,
    I have to convert quantity in one unit to quantity in another unit.
    please suggest me a function module which converts.
    Ex :
    i have quantity : MVKE-SCMNG = 20
           Unit     : MVKE-SCHME = UUE
    now  convert the quantity
           quantity : ?
           Unit     : PCE
    i have used : UNIT_CONVERSION_SIMPLE, but it did not work.
    i think the conv is material specific.
    i can get values from MARM Table .. but i am looking for a function module which can convert.
    Thank you all in advance.

    Hi
    see this may be helpfull
    i had changed the sobid (45 char) to objid (8 numc)
    reward if usefull
    SELECT OTYPE
             OBJID
             RELAT
             BEGDA
             ENDDA
             SCLAS
             SOBID FROM HRP1001 INTO TABLE IT_HRP1001
                        WHERE OTYPE = 'D'
                            AND OBJID IN S_OBJID
                            AND BEGDA GE DATE-LOW
                            AND ENDDA LE DATE-HIGH
                            AND ( SCLAS = 'E' OR SCLAS = 'ET' ).
      IF SY-SUBRC NE 0.
        MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
      ENDIF.
      LOOP AT IT_HRP1001 INTO WA_HRP1001.
        WA_SOBID-OTYPE = WA_HRP1001-OTYPE.
        WA_SOBID-OBJID = WA_HRP1001-OBJID.
        WA_SOBID-RELAT = WA_HRP1001-RELAT.
        WA_SOBID-BEGDA = WA_HRP1001-BEGDA.
        WA_SOBID-ENDDA = WA_HRP1001-ENDDA.
        WA_SOBID-SCLAS = WA_HRP1001-SCLAS.
        WA_SOBID-SOBID = WA_HRP1001-SOBID.
        APPEND WA_SOBID TO IT_SOBID.
      ENDLOOP.
    regards
    naresh

  • SAP Purchasing report : GR Quantity values

    Hi All,
      We have a purchase variance report in which the GR Quantity value is not matching the Production server data can someone tell me how the actual GR Qty is calculated because on a posting date for a PO And for Material i see a GR Qty has +ve value and -ve values and i also find that the transactions are repeating....
    Can someone help me with this , if any additional information is needed ill send you that...
    Thanks a lot.

    HI ,
    Actually in the update rules of the cube , the qunatity is being converted from PO Units to Base units , you should consider that while validating the data
    And the Actual GR quantity is derived based on the below condition
         COMM_STRUCTURE-PROCESSKEY = '002' or
         COMM_STRUCTURE-PROCESSKEY = '012' or
         COMM_STRUCTURE-PROCESSKEY = '022'
         AND COMM_STRUCTURE-BWAPPLNM EQ 'MM'
         AND COMM_STRUCTURE-CPQUAOU <> 0.
    BWMNG    --> 0CPQUAOU    (Gross purchase order value )
    BWVORG   --> 0PROCESSKEY ( you can find the below info in help.sap )
    BWVORG u2013 Transaction Key SAP BW
    This field identifies the event that is based on the information in the DataSource. The contents of this field determines the importance and the behavior of other fields in the DataSource. The field ALIEF (Number of Deliveries) is, for example, only filled if the event is a goods receipt.
    For more information, see SAP Note 684465: BWVORG for Purchasing Data
    Hope this is usefull ,
    Sathya

  • Using conversion rule to convert quantity fields

    Hi!
    I am trying to find a way to use a conversion rule to convert a quantity specified in one unit of measure to the corresponding quantity specified in a different unit of measure. I was trying to use 'Copy sender field' along with a custom 'Special conversion rule'. However, the code to convert quantities requires both the quantity and material number to do the UoM conversion. 'Copy sender field' only allows the transfer of one sender field. Is there a way to transfer two sender field into a 'Special conversion rule'.  Any help much appreciated and rewarded. Thanks, Duncan

    Hi Duncan,
    Try FM UNIT_CONVERSION_SIMPLE.
    Regards,
    Atish

  • Convert quantity field to char field

    Hi folks ,
    i have a requirement where i need to convert quantity field value to char field value so as to send in idoc.
    plz help me .its urgent
    regards,
    chandra

    data: f1(17).
    f1 = qauntity_field.
    lenth of the field f1 is the same or gr8 than quan_field also add one more place for decimal .
    ex-
    ur quan_filed like 13 and 3 decimal place than ur char field must be
    13 + 3 + 1(for decimal) = 17

  • SPRO: Quantity Optimizing and Allowed Logistics Units of Measure.

    Hi,
    during the creation of a <b>PO with ME21N</b> the system generates the following error:
    Error occurred in function module MD_SINGLE_ROUNDING 
         Message no. RPUGEN001                                                                               
    Diagnosis                                                                               
    An unexpected error occurred.                                                                               
    Procedure                                                                               
    Contact your system administrator.    
    This problem is related to customizing (SPRO), <b>Quantity Optimizing and Allowed Logistics Units of Measure</b> but I don't think is mandatory performing the above configuration.
    With trx ME21 the problem doesn't exist....
    Yours truly

    Hi,
    If conversion b/w pound and gallon has not been maintained in material master then conversion needs to be entered manually in PO.
    For PR price to be adopted in PO, Go to OMET and create a Function Authorization Key as "01", here activate "Adopt PO Price" and then assign this key to parameter ID EFB in user master SU01. And then in PR under "Valuation" Tab, you will get option for Adopting PR Price to PO. And then refer PR to PO, it will copy the PR price in PO.
    Configuration Details of Parameter "EFB"
    If you want to find these field.you should configure your SAP sytem like belowing:
    1. Go to SPRO > MM > Purchasing > Authorization Management > Define Function Authorizations for Buyers > Function Authorizations: Purchase Order > Here "New Entries" and define Function Authorization Key as "01" and give description.
    OR use T. Code - OMET
    Here under "General parameters" subscreen, cctivate "Adopt PO Price" indicator and select "Enter conditions"
    In "Possible ref. objects", select "W/o reference" otherwise reference documents (for e.g. PR, RFQ, etc...) for PO creation will become mandatory.
    2. Now go to SU01 > Enter User ID > Parameters Tab > Here for Parameter ID EFB i.e. Function Authorization: Purchase Order, maintain value "01" and check in PO, PR will become mandatory for that user.
    3. Now during creation of PR in ME51N, under "Valuation" Tab, you will get option for PO Price Adoption as Net or Gross. Select as per your requirement and it will copy Price to PO.
    In PR we have the valuation price. Also under valuation tab in PR we have a dropdown list called PO Price with 3 options " As net price" and " As gross price" and "Do not adopt.
    If we use PM order create PR.This field set Do not adopt; if we use PS project builder create PR,this fileld set AS net price. So I want to know where I can config this field's value?

  • Copa there is a option for reset value field / quantity value filed

    Hi
    As per the sap standard in copa there is a option for reset value field / quantity value filed. We
    use this function to reset a quantity or value field depending on the
    billing type (For eg L2 (Debit Memo) G2(Credit Memo). This means that
    the condition value set in the field is replaced by value 0. Due to
    this quantity value filed in copa reflects nil. My client requirement is when profit center document is generated System should display the quantity as nil.
    i have tried some enhancement but these enhancement is only used in  case of PGI . But in the case of debit and credit memo their is no PGI. first we create debit not request (va01) then billing(vf01) then document is generated .
    Can we do the same thing in profit center Accounting? When PCA document
    is generated System should display the quantity as nil.
    Please let me know some user exit or substitution or Bte  we can use ?
    Anjali

    hi Jerry,
    Very appreciated the link you sent.  In this article of this link,  it gives an example of a conversion from an external to an internal format:
    1. '1234 ' -> '00001234'
    2. 'ABCD ' -> 'ABCD '
    Just wonder why the external format '1234 '  has to be converted to '00001234', what's the purpose of doing this converstion?
    Thanks!

  • Statistical Setup Error - Error Converting Quantity

    Dear SDN Mates,
    We are getting this below error while doing the statistical setup for SD extraction in 11 application,
    Error converting quantity: unit M numerator 0 / denominator 0.
    Regards
    Arun S

    Hi guys,
    I have the same error with below message :
    Error determining rate: foreign curr.  local curr.KRW date 17.06.2011 (doc. 14024)
    I checked data in table VBAK with sale document 14024, some information of this data record related above error :
    + ERDAT (Date on Which Record Was Created) : 17.06.2011
    + WAERK (SD Document Currency) : KRW
    + STWAE (Statistics currency) : <BLANK>
    I tried to create 2 new records in Currency Exchange Rates (OB08), like this :
    But there're still error.
    Please give some ideas to solve it.
    Regards
    Dennis Vu,

  • Open Sales Order quantity & value

    Hi,
    We have a requirement here of report to show open sales order quantity & value for any month (monthend). There is a datasource 2LIS_11_V_ITM which gives Open order quantity. I have created an ODS with 2LIS_11_VAITM & 2LIS_11_V_ITM which can give me desired qty & value, but only for date of last data upload and not for date in the past.(and to get that, I have to sumup all open orders quantity without using any date filter)
    I am thinking of creating a Infocube over this ODS to update the Open Order qty & value at the monthend (Snapshot scenario). But to update this, I am not able to get the logic for date to be used in time dimension.
    If anyone can think of the solution or any alternate way to develop this kind of report, your help/suggestions are most welcome.
    Thanks,
    Vikram.

    Hi Vikram,
    Find the link, which solves u r requirement
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/arobustdesignofopensalesorderdataflow
    Thanks & Regards
    Ramakrishna Kamurthy

  • RFC Function Error: Cannot convert a value of 'MM/DD/YYYY' from type java.l

    hi experts,
    iam calling an RFC using SAP_JCO_Function. one of the input parameters is date which shud be in the format 'MM/DD/YYYY' but when i create a transaction property of data type DATETIME the format changes to " 2007-06-21 14:31:50 ". to refrain form passing this value at run time i have defined the transaction property as string and defaulted the value to MM/DD/YYYY.
    When i execute the RFC i get the error "Cannot convert a value of 'MM/DD/YYYY' from type java.l".
    Issue is with time field as well. Any suggestions would be appreciated.
    Thanks,
    Avinash

    Hi
    You can use datefromxmlformat( datetime, toformat ) .
    in toformat you give: "MM/dd/yyyy" and in datetime you pass your xml format date like: 2007-06-21 T14:31:50.
    Try like this. Hope this may help you.
    Thanks

  • Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5

     
    Hi All,
    I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
    Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
    My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
    My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
    Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
    SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
    FROM (SELECT CASE Isnumeric(
    accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
    WHEN 1 THEN Cast(
    fact_highweedsandgrassdetails.vendorinvoiceamount AS
    VARCHAR(
    10))
    END AS
    Total_Dollar_Amount,
    fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township AS
    CaseTownship,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag AS
    CaseReferredToLegalFlag,
    fact_casedetails.macinitiatedflag AS
    CaseMACInitiatedFlag,
    fact_casedetails.conversionstatusdesc AS
    CaseConversionStatusDesc,
    fact_casedetails.assignedstaff AS
    CaseAssignedStaff,
    fact_casedetails.completedstaff AS
    CaseCompletedStaff,
    fact_casedetails.closedbystaff AS
    CaseClosedByStaff,
    fact_casedetails.initiator AS
    CaseInitiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    DECIMAL(6, 2))
    AS
    DaysOpen,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursOpenToMow,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursAssignedToMow,
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END AS
    NumberComplete,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate IS
    NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate
    <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHoursOLD,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHours,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
    Assigned_Department_Staff,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
    'HWG', 0)
    , '-', 0)) AS compliancejoin,
    fact_highweedsandgrassdetails.maccomments AS Expr1,
    dbo.dim_highweedscensustracts.b1_census_tract
    FROM dbo.fact_highweedsandgrassdetails
    INNER JOIN dbo.fact_casedetails
    ON fact_highweedsandgrassdetails.casenumber =
    fact_casedetails.casenumber
    INNER JOIN dbo.dim_highweedscensustracts
    ON fact_highweedsandgrassdetails.casenumber =
    dbo.dim_highweedscensustracts.casenumber
    GROUP BY fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag,
    fact_casedetails.macinitiatedflag,
    fact_casedetails.conversionstatusdesc,
    fact_casedetails.assignedstaff,
    fact_casedetails.completedstaff,
    fact_casedetails.closedbystaff,
    fact_casedetails.initiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    fact_highweedsandgrassdetails.vendormoweddatetime,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate
    IS NOT NULL
    AND
    fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE
    fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)),
    Cast(Datediff(ss,
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN
    ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(18, 2)) * 60,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]'),
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(
    Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
    , '-', 0)),
    fact_highweedsandgrassdetails.maccomments,
    dbo.dim_highweedscensustracts.b1_census_tract) AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
    ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    ASC
    SV

    I just counted the columns from the top:
    1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
    I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
    I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
    might be staring on the wrong column.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 6.

    Hi All,
    I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
    Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
    My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
    My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
    Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
    SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
    FROM (SELECT CASE Isnumeric(
    accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
    WHEN 1 THEN Cast(
    fact_highweedsandgrassdetails.vendorinvoiceamount AS
    VARCHAR(
    10))
    END AS
    Total_Dollar_Amount,
    fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township AS
    CaseTownship,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag AS
    CaseReferredToLegalFlag,
    fact_casedetails.macinitiatedflag AS
    CaseMACInitiatedFlag,
    fact_casedetails.conversionstatusdesc AS
    CaseConversionStatusDesc,
    fact_casedetails.assignedstaff AS
    CaseAssignedStaff,
    fact_casedetails.completedstaff AS
    CaseCompletedStaff,
    fact_casedetails.closedbystaff AS
    CaseClosedByStaff,
    fact_casedetails.initiator AS
    CaseInitiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    DECIMAL(6, 2))
    AS
    DaysOpen,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursOpenToMow,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursAssignedToMow,
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END AS
    NumberComplete,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate IS
    NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate
    <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHoursOLD,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHours,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
    Assigned_Department_Staff,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
    'HWG', 0)
    , '-', 0)) AS compliancejoin,
    fact_highweedsandgrassdetails.maccomments AS Expr1,
    dbo.dim_highweedscensustracts.b1_census_tract
    FROM dbo.fact_highweedsandgrassdetails
    INNER JOIN dbo.fact_casedetails
    ON fact_highweedsandgrassdetails.casenumber =
    fact_casedetails.casenumber
    INNER JOIN dbo.dim_highweedscensustracts
    ON fact_highweedsandgrassdetails.casenumber =
    dbo.dim_highweedscensustracts.casenumber
    GROUP BY fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag,
    fact_casedetails.macinitiatedflag,
    fact_casedetails.conversionstatusdesc,
    fact_casedetails.assignedstaff,
    fact_casedetails.completedstaff,
    fact_casedetails.closedbystaff,
    fact_casedetails.initiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    fact_highweedsandgrassdetails.vendormoweddatetime,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate
    IS NOT NULL
    AND
    fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE
    fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)),
    Cast(Datediff(ss,
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN
    ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(18, 2)) * 60,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]'),
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(
    Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
    , '-', 0)),
    fact_highweedsandgrassdetails.maccomments,
    dbo.dim_highweedscensustracts.b1_census_tract) AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
    ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    ASC
    SV

    I just counted the columns from the top:
    1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
    I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
    I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
    might be staring on the wrong column.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Unable to change the order quantity value during save of sales order

    Hi Experts,
    There is a need to change the order quantity value, based on some conditions, when pressed 'ENTER' or during 'SAVE' of the sales order (VA01, VA02).
    We are trying to change the order quantity value (KWMENG) in table XVBAP in the subroutines userexit_field_modification, userexit_save_document and userexit_save_document_prepare of the user exit 'MV45AFZZ'. But the change is not replicated to field on GUI.
    The order quantity value can be changed in subroutine 'userexit_move_field_to_vbap', but the subroutine is not getting triggered when user changes only the order quantity on screen.
    Please help us in resolving this issue.
    Regards,
    Santosh

    Thanks for your time guys. The issue is resolved.
    SAP is not triggering the vbap user exit as the order quantity on screen is in structure RV45A.
    There are two ways of resolving the issue.
    1. Implement the SAP note #513342 - Quantity change and USEREXIT_MOVE_FIELD_TO_VBAP. But, it is SAP modification note.
    2. Write the code in VBEP exit of MV45AFZZ. This user exit is called whenever the order quantity is changed. But, it is called multiple times in some cases. Hence, need to write code to limit our code execution only once e.g. maintain a global table with our quantity & uom. Check when the quantity and uom in our table is same as quantity on screen. If not, exit from user-exit.
    Edited by: Santosh Kacham on Nov 11, 2011 6:37 AM

  • I have a  problem while changing quantity value in VA01

    Hi,
                       I am written my conditions in User exit save_document_prepare
    and in that I have given custom error message. After the error I have to correct the
    quantity value and then save it.
    But when I am trying to change after error mesasage it gives an Abort message
    "Item xxxx doesnot exist."
    Here is my code pls help me regarding this
    DATA : FLAG(2),
           FCODE LIKE SY-UCOMM,
    FCODE = SY-UCOMM.
    IF FLAG <> 'X'.
      IF SY-TCODE = 'VA01'.
        IF SY-UCOMM = 'SICH' OR SY-UCOMM = 'OPT1'.
          DATA: BEGIN OF T_VBAK OCCURS 0,
                        VBELN LIKE VBAK-VBELN,
                        VGBEL LIKE VBAK-VGBEL,
                        AUART LIKE VBAK-AUART,
                        NETWR LIKE VBAK-NETWR,
                       END OF T_VBAK.
          DATA : BEGIN OF T_VBAP OCCURS 0,
                         VBELN LIKE VBAP-VBELN,
                         POSNR LIKE VBAP-POSNR,
                         ZMENG LIKE VBAP-ZMENG,
                         KWMENG LIKE VBAP-KWMENG,
                 END OF T_VBAP.
          DATA : BEGIN OF I_VBUK OCCURS 0,
                   VBELN TYPE VBUK-VBELN,
                   RFGSK TYPE VBUK-RFGSK,
                 END OF I_VBUK.
          DATA : T_VBAK_RE LIKE T_VBAK OCCURS 0 WITH HEADER LINE,
                  WA_VBAK TYPE VBAK.
          DATA : I_NETWR1 TYPE VBAK-NETWR,
                 I_NETWR2 TYPE VBAK-NETWR,
                 I_NETWR3 TYPE VBAK-NETWR.
          DATA : L_VBELN TYPE VBAK-VBELN.
          SELECT VBELN VGBEL AUART NETWR
             FROM  VBAK
                   INTO TABLE T_VBAK.
          IF NOT T_VBAK[] IS INITIAL.
            SELECT VBELN RFGSK
                   FROM VBUK
                   INTO TABLE I_VBUK
                   FOR ALL ENTRIES IN T_VBAK
                   WHERE VBELN = T_VBAK-VBELN.
          ENDIF.
          SORT T_VBAK BY VBELN DESCENDING.
          IF NOT T_VBAK[]   IS INITIAL.
            SELECT VBELN POSNR ZMENG KWMENG
            FROM VBAP
            INTO TABLE T_VBAP
            FOR ALL ENTRIES IN T_VBAK
             WHERE VBELN = T_VBAK-VBELN.
          ENDIF.
          LOOP AT T_VBAK where VGBEL = XVBAK-VGBEL.
            IF T_VBAK-AUART = 'TA'.
              I_NETWR2 = T_VBAK-NETWR  + I_NETWR2.
            ENDIF.
          ENDLOOP.
          LOOP AT T_VBAK WHERE VBELN = XVBAK-VGBEL.
            IF T_VBAK-AUART = 'TISC'.
              I_NETWR1 = T_VBAK-NETWR.
            ENDIF.
          ENDLOOP.
          I_NETWR3 = I_NETWR1 - I_NETWR2.
          WA_VBAK = XVBAK.
       READ TABLE T_VBAP WITH KEY VBELN = VBAK-VBELN.
       IF SY-SUBRC = 0.
          LOOP AT XVBAP.
    READ TABLE XVBAP WITH KEY VBELN = SPACE.
            IF SY-SUBRC = 0.
              MOVE T_VBAK-VBELN TO XVBAP-VBELN.
              MODIFY XVBAP.
            ENDIF.
          ENDLOOP.
          IF FLAG <> 'X'.
            IF   WA_VBAK-AUART <> 'RE'.
              IF WA_VBAK-NETWR > I_NETWR3.
              MESSAGE E000(ZMS1) WITH I_NETWR3.
                      ENDIF.
                       ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
       ENDIF.
      ENDIF.
    ENDIF.
                                                                  Thanks in Advance
                                                                          Ravi

    Hi,
    This error comes when we use the work area taht is already defined in the program and that u have not created in this exit.
    i think in this exit, u have created ur own internal table and workarea for all tables except XVBAP.
    just create WA like
    <b>data : xvbap type xvbap.</b>
    LOOP AT XVBAP.
    READ TABLE XVBAP WITH KEY VBELN = SPACE.
    IF SY-SUBRC = 0.
    MOVE T_VBAK-VBELN TO XVBAP-VBELN.
    MODIFY XVBAP.
    ENDIF.
    ENDLOOP.
    IF FLAG <> 'X'.
    i had faced the same problem and it got solved in this way.
    Hope it helps.
    Regards,
    Sonika

Maybe you are looking for

  • Error while booting a virtual machine

    Hello, I have a problem when I try to boot a virtual machine in the web interface : "Error changing desktop state: com.sun.vda.service.api.ServiceException: No suitable hosts to start a desktop for Desktop Provider gorilla.cscs.wmin.ac.uk." So, I cre

  • Is there another way into an iTunes account? Besides email verification and security questions? I'm not trying to hack I have rather extrodinary circumstances!

    Alright so I had an iTunes account that as you'd expect was linked to my email. Long story short my email got hacked and hotmail shut it down because my email address which I could no longer get into was sending spam to all my contacts. Anyway I used

  • How to add "child data" button in Personal information

    Hi guys , I m a portal consultant , we are EHP4 portal and ECC 6 in R/3... In personal Information > Family members/Dependents> there is no Add child tab is there to enter the details of the children...... how to add this?? please help me .......

  • Menu greyed out

    Hi Hope someone can help. I have iChat 3.1.8 and, in another thread, http://discussions.apple.com/thread.jspa?threadID=949398&tstart=0, the OP is advised to click Show Names in the View menu. My problem is, even with the Buddy List as front window, b

  • AE Output Module "ignores" Audio Output

    Hi! I have created an output module as seen below. The "Audio Output" box is checked. Almost everytime I render a file there's no audio in the rendered video.... When I put the comp into the render queue, go to the output module setting, uncheck the