Convert syncronous serial data into sequence of hex values
Hi,
I have a problem analysing captured data of a digital I/O board. I hope one of you can give me an advice/hint on this.
Used Software: Labview Express 7.0
Problem description:
The captured digital data contains on channel 0 a clock signal, on channel 1 a reset signal and on channel 3 a data signal. The data signal is syncronized to the clock and consists out of 8 serial data bits. My problem is, how to convert this clock syncronized serial data signal into a sequence (array) of bytes each represented by 2 hex digits?
More details on the problem environment:
- The captured data comes from an ASCII file which contains data samples of a 16bit digital I/O card. Every line contains one sample encoded as 4 hex digits
- The file is converted by a VI to a digital waveform and plotted by a digital waveform graph.
One of my core problem on the way to a solution lies in the area, of how to "Trigger and Gate" the digital waveform based on the rising edge of channel 0.
Thanks in advance for your help!
Tryber.
I checked with the 7.0 express version we have loaded on an older computer still and the part that I think you can use was in that version. In the second loop I had made a note: Boolean Crossing PtByPt. This looks at a binary input and can output a true pulse (one iteration) based on the direction input condition. This has three options; False-True (rising), True-False (falling), or Either which is the option I had used in that vi. This should allow you to detect a false-true state change on the clock channel. Now, you say that the clock pulse is not consistant, but what about the information pulses? That was the reason for the first two loops on my program. To insure that the digital value was measured during one input pulse to avoid turning two or more input pulses into one digital value.
As far as your question about trigger functions between the two, I'm not too sure. I believe they offer the same options that I tend to use so I havnt had a problem with either. On your block diagram menu select All Functions > Analyze > Point by Point > Other Functions PtbyPt. There are some very handy tools in that menu.
Similar Messages
-
How to Convert internal table data into xml and xml data into internal tab
Hi Guys,
I have a requirement that i have to convert the internal table data into xml format and viceversa . for my requirement i came to know that i have to use Transformations concept. i done the converting the data from internal table into xml data by using standard Tranformations. My Question is
1) Can i use same Transformation to convert the xml data into abap internal table. if it is possible then how ???
2) Is it possible using the standard Transformation or I have to go for XSLT approach
Please help me out from this guys,
Thanks and Regards
KotiHi Koti,
This is possible. There is a link. With the help of this link you can convert ABAP data to XML and vice versa.
Link: http://www.heidoc.net/joomla/index.php?option=com_content&view=article&id=15:sapxslt&catid=22:sap-xslt&Itemid=31 -
How to Convert internal table data into text output and send mail in ABAP
Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VThere's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
* -------- create persistent send request ------------------------
gv_send_request = cl_bcs=>create_persistent( ).
* -------- create and set document -------------------------------
* create text to be sent
wa_line = text-001.
APPEND wa_line TO gt_text.
CLEAR wa_line.
APPEND wa_line TO gt_text.
LOOP AT gt_fail ASSIGNING <fs_fail>.
MOVE <fs_fail>-retry_count TO gv_count.
CONCATENATE text-002
<fs_fail>-setting_id
text-003
gv_count
INTO wa_line SEPARATED BY space.
APPEND wa_line TO gt_text.
CLEAR wa_line.
ENDLOOP.
APPEND wa_line TO gt_text.
wa_line = text-007.
APPEND wa_line TO gt_text.
* create actual document
gv_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = gt_text
i_length = '12'
i_subject = 'Failed Precalculation Settings!' ).
* add document to send request
CALL METHOD gv_send_request->set_document( gv_document ).
* --------- set sender -------------------------------------------
gv_sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD gv_send_request->set_sender
EXPORTING
i_sender = gv_sender.
* --------- add recipient (e-mail address) -----------------------
LOOP AT s_email INTO wa_email.
MOVE wa_email-low TO gv_email.
gv_recipient = cl_cam_address_bcs=>create_internet_address(
gv_email ).
CALL METHOD gv_send_request->add_recipient
EXPORTING
i_recipient = gv_recipient
i_express = 'X'.
ENDLOOP.
* ---------- set to send immediately -----------------------------
CALL METHOD gv_send_request->set_send_immediately( 'X' ).
* ---------- send document ---------------------------------------
CALL METHOD gv_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE text-004.
ENDIF.
COMMIT WORK.
* exception handling
CATCH cx_bcs INTO gv_bcs_exception.
WRITE: text-005.
WRITE: text-006, gv_bcs_exception->error_type.
EXIT.
ENDTRY.
with the following declarations
* TABLES *
TABLES:
adr6,
rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS *
DATA:
gt_fail TYPE SORTED TABLE OF rsr_prec_sett
WITH UNIQUE KEY setting_id run_date,
gt_text TYPE bcsy_text,
wa_fail LIKE LINE OF gt_fail,
wa_line(90) TYPE c.
FIELD-SYMBOLS:
<fs_fail> LIKE LINE OF gt_fail.
* VARIABLES *
DATA:
gv_count(4) TYPE n,
gv_send_request TYPE REF TO cl_bcs,
gv_document TYPE REF TO cl_document_bcs,
gv_sender TYPE REF TO cl_sapuser_bcs,
gv_recipient TYPE REF TO if_recipient_bcs,
gv_email TYPE adr6-smtp_addr,
gv_bcs_exception TYPE REF TO cx_bcs,
gv_sent_to_all TYPE os_boolean.
* SELECTION-SCREEN *
SELECT-OPTIONS:
s_email FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
wa_email LIKE LINE OF s_email. -
How to convert digital array data into analog signal
i want help to convert digital data array into analog signal
shubham62 wrote:
We are implimenting real time audio trans-receiver. We have converted input audio data(analog form) into digital data. At the receiver side we received digital data which is in the form of digital data array.But we are unable to recover back our original input data. So please help us to sort out the problem.
Still no useful information. How was the data converted to digital in the first place? What conversion parameters did you use? As was said, you just need to do the math backwards to get it back into the analog.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Dynpro - how to convert a FLTP data into a nice numeric one ?
Hi,
I have a fltp data entered in my dynpro via a search help, into a decimal data .
i would want it to be of format ___,_ ( 6 positions, 1 decimal).
thus i have declared it in the screen element list : decimal length 6, with a mask such as ____,_
But the fltp is like '5,700000000000000E+00', and when selected is like ' 5,700'. So i am blocked by the following anomaly "Input should be in the form ____,_ "
What should i do to correct this anomaly ? create or convert my data in an exit in the search help ? or is there a more simple solution ?
Thanks
Sabinemy solution :
Data dynpro_data_from_help(22) type c VALUE '4.500000000000000E+01'.
DATA wl_FLTP TYPE F . " DATA wl_PD TYPE P DECIMALS 1.
REPLACE ',' WITH '.' INTO dynpro_data_from_help.
wl_fltp = dynpro_data_from_help.
wl_PD = wl_fltp.
write wl_PD to dynpro_data_from_help.
shift dynpro_data_from_help right deleting trailing '0'. -
Converting Flat File data into XML
Hi Experts,
Consider the message type of the SENDER system and flat file data
<dt_sender>
<root>
<header1> 0..1
<f1>
<f2>
<f3>
<header2> 0..1
<f4>
<f5>
<f6>
<item> 1..unbounded
<f7>
<f8>
<f9>
<f10>
<f11>
<f12>
</item>
abc def ghi jkl mno pqr
123 123 123 123 123 123
456 456 456 456 456 456
how to convert the flat file data into following XML data. please note that each field value is separated by TAB delimeter...wht parameters shld b used
<root>
<Header1>
<f1>abc</f1>
<f2>def</f2>
<f3>ghi</f3>
</Header1>
<Header2>
<f4>jkl</f4>
<f5>mno</f5>
<f6>pqr</f6>
</Header1>
<item>
<f7>123</f7>
<f8>123</f8>
<f9>123</f9>
<f10>123</f10>
<f11>123</f11>
<f12>123</f12>
<f7>456</f7>
<f8>456</f8>
<f9>456</f9>
<f10>456</f10>
<f11>456</f11>
<f12>456</f12>
</item>
points will be given to the correct answers
Thanks in advance.
FAisal
Edited by: Abdul Faisal on Feb 29, 2008 5:53 AMFaisal,
When you read the multiple recordset strucutre file then each record in txt file should have an header from which you can identiy which segment it should go.. and you identiy it by using the keyfiledValue in file adapter
<root>
<header1> 0..1
<f1>
<f2>
<f3>
<header2> 0..1
<f4>
<f5>
<f6>
<item> 1..unbounded
<f7>
<f8>
<f9>
<f10>
<f11>
<f12>
</item>
for this input file
abc def ghi jkl mno pqr
123 123 123 123 123 123
456 456 456 456 456 456
abc def ghi can be read using the file adater to header 1 usinfg key field value, but using the same file adapter you cannt put GHI into header2.
else you should read whole row abc def ghi jkl mno pqr in single filed and write an UDF to split data to header1 and Header 2
similarly you have to take care for item records also
if your inout file is something like this
abc def ghi
jkl mno pqr
123 123 123 123 123 123
456 456 456 456 456 456
abc identifies to Header 1
JKL for Header 2 so on...
read the whole line in single field and write UDF to Split to header 1 and header 2 similary for item. -
Convert reqular | delimeted data into XMLtype
How do we hold data
How do I convert/store regular data (coming from | delimeted .dat file) into Oracle XMLtype.
there will 400+ columns on each record and the file will be having about 50 millions records,
I have requirement to use the XMLtype, any help would be greatly appreciated.
In some cases the incoming file has more columns on day2 from day1. If table is predefined the no. of columns, Then this case I will loose that additional column's values. The main stuff is even if receive different no. of columns if need to capture without altering the table?
Is there any option, without altering the table, can I capture the additional columns in Oracle?
Also is there any advantage or disadvantage of this process, please!
Thanks,Hi,
You can declare the column as XMLType and the storage as CLOB.
1 SELECT SYS_XMLGen('T')
2 FROM user_tables
3* WHERE rownum = 1
sql> /
SYS_XMLGEN('T')
<ROW>T</ROW>
sql> create table t2 (
2 x xmlType)
3 XMLType x STORE AS CLOB;
Table created.
sql> insert into t2
2 SELECT SYS_XMLGen('T')
3 FROM user_tables
4 WHERE rownum = 1;
1 row created.
sql> commit;
Commit complete.Thanks,
Rajesh.
Please mark this/any other answer as helpful or answered if it is so. If not, provide additional details/feedback.
Always try to provide create table and insert statements to help the forum members help you better. -
How to convert internal table data into excel format?
Hi all,
I want to convert internal table data in excel format and then
send it as email attachment in workflow.
Please tell me how do i perform this.
Regards,
Arpita.Hi Arpita,
Try this sample code::
Send mail
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
mailtxt = htmllines.
append mailtxt.
endloop.
mailrec-receiver = 'your receiver mail id'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = maildata
document_type = 'EXL'
put_in_outbox = 'X'
tables
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Hope it will help you.
Regards,
NIkita -
How to convert the exponential data into number
Hi,
I have a table with a column which is a vaarchar2(60). I have a CSV file in which, I have stored value as 77052512125510000, but it got converted into 7.71E16. And when I have stored the same in the database, it got saved as 7.71E16. How can I get the original value
Please help
Regards
Edited by: Sarma12 on May 25, 2012 3:11 AMSarma12 wrote:
The issue is, the data is already copied into the database. Now while retrieving from the database, I am getting that value in the scientific notation and not similar to the data which I have in the CSV file.
RegardsYou need to be smarter than the tools you use
bcm@bcm-laptop:~$ sqlplus user1/user1
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 25 09:50:02 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
09:50:03 SQL> @test
09:50:07 SQL> drop table test;
Table dropped.
09:50:09 SQL> create table test (id number);
Table created.
09:50:10 SQL> insert into test values (77052512125510000);
1 row created.
09:50:10 SQL> select * from test;
ID
7.7053E+16
09:50:10 SQL> column id format 999999999999999999999
09:50:10 SQL> select * from test;
ID
77052512125510000
09:50:10 SQL>
09:50:10 SQL> -
Convert Non-Hierarchical data into Hierarchical data for Tree creation
Hi guys,
I've been trying to figure this out for about two entire days now and I'm still stuck and see no possible solution which doesn't involve a new table creation.
Thing is that I want to create a Tree to navigate through Projects and Tasks, I'm using the "Task Manager" demo app, which I have customized a bit to fit my needs.
Basically I cannot create the Tree 'cause the relation between Projects and Tasks is not a hierarchical relation, it's a 1:N relation as this:
__Projects__
ID (PK)
PROJECT_NAME
___Tasks___
ID (PK)
PROJECT_ID (FK references Projects.ID)
So what I need to do is "force" that 1:N relation to a a hierarchical relation by creating a query (view) that joins the two tables into a single one and that have 2 columns I can use as ID and PARENT_ID for the tree creation.
This is the Data Model:
CREATE TABLE "EBA_TASK_PROJECTS"
( "ID" NUMBER,
"PROJECT_NAME" VARCHAR2(255),
"CREATED_ON" DATE NOT NULL ENABLE,
"CREATED_BY" VARCHAR2(255) NOT NULL ENABLE,
"UPDATED_ON" DATE,
"UPDATED_BY" VARCHAR2(255),
"FLEX_01" VARCHAR2(4000),
"FLEX_02" VARCHAR2(4000),
"FLEX_03" VARCHAR2(4000),
"FLEX_04" VARCHAR2(4000),
"FLEX_05" VARCHAR2(4000),
"PARENT_ID" NUMBER,
"IS_ACTIVE" VARCHAR2(1),
"DESCRIPTION" VARCHAR2(4000),
CONSTRAINT "EBA_TASK_PROJECTS_ACTIVE_CC" CHECK (is_active in ('Y', 'N')) ENABLE,
CONSTRAINT "EBA_TASK_PROJECTS_PK" PRIMARY KEY ("ID") ENABLE
) ;ALTER TABLE "EBA_TASK_PROJECTS" ADD CONSTRAINT "EBA_TASK_PROJECTS_FK" FOREIGN KEY ("PARENT_ID")
REFERENCES "EBA_TASK_PROJECTS" ("ID") ON DELETE CASCADE ENABLE;
CREATE TABLE "EBA_TASK_TASKS"
( "ID" NUMBER NOT NULL ENABLE,
"PROJECT_ID" NUMBER NOT NULL ENABLE,
"TASK_PRIORITY" VARCHAR2(400) NOT NULL ENABLE,
"TASK_DIFFICULTY" VARCHAR2(400) NOT NULL ENABLE,
"TASK_NAME" VARCHAR2(4000) NOT NULL ENABLE,
"TASK_DETAILS" VARCHAR2(4000),
"CREATED_ON" DATE NOT NULL ENABLE,
"COMPLETED" DATE,
"CREATED_BY" VARCHAR2(400) NOT NULL ENABLE,
"STATUS" VARCHAR2(4000),
"UPDATED_ON" DATE,
"STARTED" DATE,
"TASK_PREDEFINED_ID" NUMBER,
"UPDATED_BY" VARCHAR2(255),
"USER_NAME" VARCHAR2(255) NOT NULL ENABLE,
"FLEX_01" VARCHAR2(4000),
"FLEX_02" VARCHAR2(4000),
"FLEX_03" VARCHAR2(4000),
"FLEX_04" VARCHAR2(4000),
"FLEX_05" VARCHAR2(4000),
"PERCENTAGE" NUMBER,
CONSTRAINT "EBA_TASK_TASKS_PK" PRIMARY KEY ("ID") ENABLE
) ;ALTER TABLE "EBA_TASK_TASKS" ADD CONSTRAINT "EBA_TASK_TASKS_PROJECTS_FK" FOREIGN KEY ("PROJECT_ID")
REFERENCES "EBA_TASK_PROJECTS" ("ID") ON DELETE CASCADE ENABLE;
I'm using APEX4.0
That's pretty much it guys, hope you can help me with this. I'm really stuck on this and am about to give up.WOW Odie! You're awesome !! It worked like a charm, I created a view as you suggested:
CREATE OR REPLACE FORCE VIEW "VIEW_TASKS_PROJECTS_TREE" ("ID", "PARENT_ID", "NODE_NAME") AS
SELECT to_char(id) as id
, null as parent_id
, project_name as node_name
FROM eba_task_projects
UNION ALL
SELECT to_char(id)
, to_char(project_id)
, task_name
FROM eba_task_tasks;
And then I created a new tree with the defaults and customized the Tree query a bit (just added the links really):
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
"NODE_NAME" as title,
null as icon,
"ID" as value,
null as tooltip,
'f?p=&APP_ID.:22:&SESSION.::NO::P22_ID,P22_PREV_PAGE:' || "ID" || ',3' as link
from "#OWNER#"."VIEW_TASKS_PROJECTS_TREE"
start with "PARENT_ID" is null
connect by prior "ID" = "PARENT_ID"
order siblings by "NODE_NAME"
Thanks man, you saved me a lot of time and headaches :) -
Data convertion while exporting data into flat files using export wizard in ssis
Hi ,
while exporting data to flat file through export wizard the source table is having NVARCHAR types.
could you please help me on how to do the data convertion while using the export wizard?
Thanks.Hi Avs sai,
By default, the columns in the destination flat file will be non-Unicode columns, e.g. the data type of the columns will be DT_STR. If you want to keep the original DT_WSTR data type of the input column when outputting to the destination file, you can check
the Unicode option on the “Choose a Destination” page of the SQL Server Import and Export Wizard. Then, on the “Configure Flat File Destination” page, you can click the Edit Mappings…“ button to check the data types. Please see the screenshot:
Regards,
Mike Yin
TechNet Community Support -
Convert work area data into comma separator format ( CSV format )
the function moudule sap_convert_to_csv_format is not available in my system . it is a not released fm as of now. so i cant use it.
My requirement is to send the details to app server in a comma separated format.
For each work area , which i transfer to application server, i hv to separte each field by a comma separtaor.
TRANSFER wa to VA_FILENAME LENGTH 256 ENF OF LINE.
Suppose my work area has fields wa-f1 wa-f2 wa-f3, it should write in app server as value1, value2, value3 like wise....
Suggest me if there is any alternative function module to acheiver this like when we pass wa to fm, the fields should be comma separator,
Any other useful suggestions are welcome.
ThanksHi,
here is the piece of code to transfer data from internal table to applivcation server as a comma seperated file..
FORM comma_sep_file .
DATA: l_cost_center_str TYPE type_cost_center.
IF it_cost_center[] IS NOT INITIAL.
**Concatenate file path and file name
CONCATENATE p_cpath p_cfile INTO v_cost_cen_output.
OPEN DATASET v_cost_cen_output FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
If Network file could not be opened, give a message.
IF sy-subrc <> 0.
WRITE : / text-030 , v_cost_cen_output .
MESSAGE s000(zp) WITH text-015 .
CLEAR : v_cost_cen_output,
p_cpath .
ELSE.
LOOP AT it_cost_center INTO l_cost_center_str.
CONCATENATE l_cost_center_str-co_cen_code
l_cost_center_str-co_cen_name
l_cost_center_str-fld3
l_cost_center_str-fld4
l_cost_center_str-set_true INTO wa_csvdata
SEPARATED BY c_const_sep.
TRANSFER wa_csvdata TO v_cost_cen_output.
CLEAR wa_csvdata.
ENDLOOP.
ENDIF."IF sy-subrc <> 0.
CLOSE DATASET v_cost_cen_output.
ENDIF.
ENDFORM. "
i hope this will help you...
Thanks & Regards
Ashu Singh -
How to convert the input Dates into ReminderInfo in AssignTask Activity!!
Hi
We are reading reminder time and Date from the user thru the form. We want to bind this input date and time with ReminderInfo data type to set
Reminders in Assign Task Activity.
Please find the ppt for more info.
Please help us in this regard.
Thanks
PraveenNith,
I know this thread is old, but how do you identify the Assign Task instance you want to adjust?
I see processData/asdf..... in your screen shot - is this a global reference to assign task objects or to a specific instance?
I have a process that has multiple assign task calls in it, and only want to set reminders on one of them.
Thanks for your help - as always.
Mark -
Convert table row data into column - 8i
hello all,
i have a table with the following data
Machine Time
MAC1 - 1
MAC2 - 2
MAC3 - 3
MAC4 - 4
MAC5 - 5
and want to have a query as only for the mac1, mac2 and mac3
MAC1 MAC2 MAC3
1 2 3
how to acheived this...i am on 8i thanks in adv.
KKSELECT SUM(DECODE(MACHINE,'MAC1',TIME)) "MAC1",
SUM(DECODE(MACHINE,'MAC2',TIME)) "MAC2" ,
SUM(DECODE(MACHINE,'MAC3',TIME)) "MAC3" FROM TABLENAME -
How to save ALV data into DB after Editing values in WDA
Hi All,
I have created a WD application with and able to successfully make columns editable in ALV. But I failed when trying to save the edited data in database.
I use ON_CELL_ACTION event but its not working as of now. I go through few blocks but ultimately i got confused. Please guide me in correct way.Hi Sanjib,
ON_DATA_CHECK event is triggered every time when you change the data in table
For this event, you have to implement an Event Handler method in which the logic is written.
There is already a thread where this question has been answered:
ALV Edit how to save changes to DB??
I would suggest that you search more on scn before starting a discussion
Regards,
Ashvin
Maybe you are looking for
-
Hi there. Firstly is there a concise document that explains how to create actions using the new condition statements - tried google nothing step by step with examples. I would like to crop an image to suit then have it resize vertically to a set size
-
DVI question - not recognizing monitor
I just bought a new lG L203WT monitor and I get nothing when I hook it up to my MPB. When I hook it up the following way it works fine: Apple DVI to VGA adaptor -- provided VGA to DVI cable -- DVI in on monitor -- RGB input selection on monitor. Its
-
Awesome Bar: auto-complete suggestion does not remember port number from URL
I visit URLs with non-standard ports all the time such as http://localhost:8080. When I start typing "localhost" into the address bar, the Awesome Bar suggests only "http://localhost" - i.e. WITHOUT the port 8080 - instead of suggesting the full URL
-
Hi all I don't know where to post my question, I posted the same question in SQL Developer but didn't get any answer so I'm going to post it here and I hope that I will get your advice regarding this. I'm wondering that if someone suggest me about my
-
The last scheduled refresh failed. Click for details
Hi, I have Discoverer scheduled results published in Portal via portlet. The scheduled job is set to run everyday in Discoverer. In Portal while publishing the results I set it up to refresh every day. Though the discoverer scheduled job runs without