Action with conditions

Hi there. Firstly is there a concise document that explains how to create actions using the new condition statements - tried google nothing step by step with examples.
I would like to crop an image to suit then have it resize vertically to a set size then stroke it with a colour of your choice (would stop and ask you to pick a colour from the image) then save it. Before conditions I made one but if the image changes the ratio of width to height during the crop it fails. Also of course before conditons it uses the colour for the stroke that I chose when making the the original action. BTW I don't have a document portrait option, document square and document horizontal only.
Thanks, Rod.

I can't help with the action itself because I am not sure what you are trying to accomplish.
The principle is simple. You make an easy action as a starting point and insert a condition: say the image is horizontal then run action A otherwise run action B. So in fact you need 3 actions in total.
I my opninon the first action should just query the condition. The actual things that need to be done you put in the 2 other "real" actions.
BTW "horizontal only" is enough. If it is not horizontal then its vertical (unless its square but that option is provided)

Similar Messages

Action with a condition that checks for a survey filled in a transaction

Hi!
I need to create an action with a condition that checks if there is a survey filled in the complaint document.
Is there any way to do it?
Thanks a lot!
Susana Messias

Hi Siva,
Thanks for the document.
My scenario its the following:
I have a complaint with a survey assigned to it. I need to create an action that creates a follow-up task to the person responsible when the status is equal to Completed and the survey it's not filled.
I customized the action profile as you said, but the problem is to create a condition with the information about the survey. The field status it's ok to insert in a condition, but how about the survey?
Any ideas?!
Susana Messias

Help with Conditional Display and Validation

Version 4.1.1.00.23
Hello,
I'm having a difficult time with a conditional display and validation I'm hoping someone can help with.
Requirements:
When the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox)
If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL)
What I've tried
Create a Dynamic Action on the Start Date
Event: Change
Selection Type:Item(s)
Items(s): P51_START_DATE
Condition: none
True Action Section:
Action: Show
Fire on Page Load: Checked
Show all page items on the same line: No
Affected Items Section:
Selection Type:Item(s)
Item(s): P51_CHANGE_REASON,P51_CHANGE_DESC
I've also created a Dynamic Action with similar settings for the P51_END_DATE.
I created a Validation for the P51_CHANGE_REASON as Function Returning Error Text:
DECLARE
    v_start_date    work_items.start_date%TYPE;
    v_end_date      work_items.end_date%TYPE;
BEGIN
    SELECT start_date
          ,end_date
    INTO   v_start_date
          ,v_end_date
    FROM   work_items
    WHERE work_items_id = :P51_WORK_ITEMS_ID;
    IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
          :P51_CHANGE_REASON IS NULL ) THEN
        RETURN 'Change Reason must have a value';
    END IF;
END;
The Issue
I tried to create another Dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields on page load, but when either of the date fields are changed and the validation is fired the P51_CHANGE_REASON and P51_CHANGE_DESC are hidden again.
There are two buttons to submit the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will submit the page and branch to the previous page (which is a report with EDIT buttons to edit the record).
I can't get the page load Dynamic Action to NOT fire when the validation is fired.
I hope this is clear and if not what information can I provide?
Thanks,
Joe

Phil,
Thank you for looking at this.
Yes if the Change Reason is NULL when the edit page is displayed then the Change Reason and Change Description fields are hidden. If the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox). If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL).
The problem I'm having is that if no Change Reason is entered and the page is saved thereby firing the validation the Change Reason and Change Description fields are hidden again (because of the On-Load Dynamic Action to hide them). So now the user can't put in a Change Reason...unless they change one of the date fields again which isn't going to be accepted.
Is there a way to determine if a validation error was fired and be able to use that on the On-Load Dynamic Action to hide the two fields? Something like...If the validation fired then don't run?
Please let me know if I'm still confusing you.
Thanks,
Joe

Jquery + json generate html buttons with condition

Hi all,
My need is to generate buttons with conditions described in json. Help me please, I’m newbie.
Here is my json code (it is valid, but does not work with html code below) :
    "Caption": "Module caption",
    "IconsDirectory": "C://Images/",
    "Buttons": [
            "Conditions": [
                    "ConditionText": "1 == 1",
                    "ButtonText": "Text1",
                    "Visible": true,
                    "Colors": {
                        "FontColor": "#FFFFFF",
                        "BGColor": "#00FF00"
                    "Size": {
                        "Width": 200,
                        "Height": 50
                    "Icon": {
                        "FileName": "Smile.png",
                        "Width": 16,
                        "Height": 16
                    "Url": {
                        "UrlAddress": "http://www.google.com",
                        "OpenNewWindow": true
                    "JavaScriptAction": {
                        "Text": "alert('ok');"
                    "ConditionText": "2 == 2",
                    "ButtonText": "Text2",
                    "Visible": true,
                    "Colors": {
                        "FontColor": "#FFFFFF",
                        "BGColor": "#00FF00"
                    "Size": {
                        "Width": 200,
                        "Height": 50
                    "Icon": {
                        "FileName": "Smile.png",
                        "Width": 16,
                        "Height": 16
                    "Url": {
                        "UrlAddress": "http://www.google.com",
                        "OpenNewWindow": true
                    "JavaScriptAction": {
                        "Text": "alert('ok');"
html code:
<html>
<head>
<title>SMButtons</title>
[removed][removed]
[removed]
//When document loaded.
$(document).ready(function(){
// Get data from file as JSON
            $.getJSON('weekendtask.json', function(data) {
        var buttons = data.Buttons;
           $.each(buttons, function(key, val)
                    $('<li><input type="button" value="'+ val.ButtonText +'"/></li>').appendTo('#ulObj');
   [removed]
</head>
<body>
<br>
<br>
<div>
<ul id='ulObj'>
<li>1</li>
<li>2</li>
<li>3</li>
</ul>
</div>
</body>
</html>
Also I would like to show here my working code (generating html buttons from json without condition).
json code (it works) :
    "Caption": "Module caption",
    "IconsDirectory": "C://Images/",
    "Buttons": [
            "TText": "google",
            "JavaScriptAction": "alert('google')"
            "TText": "microsoft",
            "JavaScriptAction": "alert('microsoft')"
            "TText": "yahoo",
            "JavaScriptAction": "alert('yahoo')"
html code (it works) :
<html>
<head>
<title>SMButtons</title>
<script src="jquery/jquery-1.4.2.js"></script>
<script type="text/javascript">
//When document loaded.
$(document).ready(function(){
// Get data from file as JSON
            $.getJSON('Module.json', function(data) {
            // Set json data from file to variable 'persons'
    var buttons = data.Buttons;
    var icondir = data.IconsDirectory;
    // For each item of variable person append to ul list
           $.each(buttons, function(key, val)
                    //$("<li><input type='button' onClick='"+ val.Url +"' value='"+ val.Text +"'/></li>").appendTo('#aaa');
//$("<li><input type='button' style='"+ val.Style +"' onClick='"+ val.Url +"' value='"+ val.Text +"'/></li>").appendTo('#aaa');
//$("<li><input type='button' value='"+ val.TText +"'/></li>").appendTo('#bbb');
                    //style="height: 25px; width: 100px"
                    //$('<li><input type="button" onClick="'+ val.action +'" value="'+ val.Text +'"/></li>').appendTo('#aaa');
                    $('<li><input type="button" onClick="'+ val.JavaScriptAction +'" value="'+ val.TText +'"/></li>').appendTo('#ulObj');
    //var knop = data.Knop;
    // For each item of variable person append to ul list
           //$.each(buttons, function(key, val)
                    //$("<li><input type='button' onClick='"+ val.Url +"' value='"+ val.Text +"'/></li>").appendTo('#aaa');
//$("<li><input type='button' style='"+ val.Style +"' onClick='"+ val.Url +"' value='"+ val.Text +"'/></li>").appendTo('#bbb');
                    //style="height: 25px; width: 100px"
                    //$('<li><input type="button" onClick="'+ val.action +'" value="'+ val.Text +'"/></li>').appendTo('#aaa');
                    //$('<li><input type="button" onClick="'+ val.action +'" value="'+ val.Text +'"/></li>').appendTo('#aaa');
   </script>
</head>
<body>
<br>
<br>
<div>
<ul id='ulObj'>
<li>1</li>
</ul>
</div>
<br>
<div>
<ul id='aaa'>

</ul>
</div>


<div>
<ul id='bbb'>


</ul>
</div>
</body>
</html>

What you are saying makes great sense. It's just the mechanics behind what you've said that I'm unclear about.
<p>
Are you saying to create another button within the same region with the same attributes/position, so they overlay each other? Then set the conditions on both buttons?
<p>
If I understand the above correctly, then how do I set the conditions? I guess I'm asking where do I place the SQL statement and how does the results relate to the button conditions?
<p>
Thanks for the help,
David

SUM function with condition in RTF template

Hi All,
I have a problem in calculating the SUM in RTF template with condition,
Here is the XML
- <LIST_G_LINE_NOTES>
- <G_LINE_NOTES>
<LINE_TRX_ID>1567856</LINE_TRX_ID>
<LINE_ID />
- <LIST_G_TRX_LINE>
- <G_TRX_LINE>
<CF_ITEM_NO>SDCN1144B</CF_ITEM_NO>
</G_TRX_LINE>
</LIST_G_TRX_LINE>
- <LIST_G_LINE_EQUIVALENT_UNIT_PRICE>
- <G_LINE_EQUIVALENT_UNIT_PRICE>
<LINE_EQUIVALENT_UNIT_PRICE>-15.99</LINE_EQUIVALENT_UNIT_PRICE>
<LINE_EXCHANGE_EXTENDED_AMOUNT>-223.86</LINE_EXCHANGE_EXTENDED_AMOUNT>
<CUSTOMER_TRX_LINE_ID>1567856</CUSTOMER_TRX_LINE_ID>
</G_LINE_EQUIVALENT_UNIT_PRICE>
</LIST_G_LINE_EQUIVALENT_UNIT_PRICE>
- <LIST_G_TRX_LINE>
- <G_TRX_LINE>
<CF_ITEM_NO></CF_ITEM_NO>
</G_TRX_LINE>
</LIST_G_TRX_LINE>
I need the summation of field LINE_EXCHANGE_EXTENDED_AMOUNT with the condition CF_ITEM_NO!=''
can anybody help me with the solution.
Thanks in Advance

Kavipriya,
Here is the XML
<LIST_G_LINE_NOTES>
<G_LINE_NOTES>
<LINE_TRX_ID>1567856</LINE_TRX_ID>
<LINE_ID />
<LIST_G_TRX_LINE>
<G_TRX_LINE>
<LINE_DELIVERY_ID />
<DISCOUNT>0</DISCOUNT>
<CP_LN_TAX_AMT />
<CF_ITEM_NO>SDCN1144B</CF_ITEM_NO>
</G_TRX_LINE>
</LIST_G_TRX_LINE>
<LIST_G_LINE_EQUIVALENT_UNIT_PRICE>
<G_LINE_EQUIVALENT_UNIT_PRICE>
<LINE_EXCHANGE_EXTENDED_AMOUNT>-223.86</LINE_EXCHANGE_EXTENDED_AMOUNT>
</G_LINE_EQUIVALENT_UNIT_PRICE>
</LIST_G_LINE_EQUIVALENT_UNIT_PRICE>
</G_LINE_NOTES>
Edited by: user13012317 on Mar 10, 2011 11:00 PM

Automator action with dropdown to make folders with predetermined names

Is there an action/workflow that will allow me to create Folders using a dropdown menu of predetermined names for those folders?

I haven't seen one, and since no one has posted about one yet, I'll throw this out.
I modified a couple of handlers I have laying around into a Run AppleScript action that will make folders from a list of names. The list can be set in a Get Specified Text action, with the "menu" being a Choose from List action:
Tested workflow:
1) Get Specified Text (your folder names, separated by returns) for example:
Testing
Another test
My Spiffy New Folder
2) Filter Paragraphs (Return paragraphs that are not empty)
3) Choose from List (Prompt: Please choose folder names:)
4) Run AppleScript:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;"
title="this text can be pasted into an Automator 'Run AppleScript' action">
on run {input, parameters}
make folders with names from a list
input: a list of names (text items)
output: a list of Finder items (aliases) created
set output to {}
set DestinationFolder to missing value -- set the destination path here if desired
try -- verify that the path is valid
set DestinationFolder to DestinationFolder as alias
on error
set DestinationFolder to (choose folder with prompt "Choose the location to make the selected folders:")
end try
repeat with AnItem in the input
GetUniqueName for AnItem from DestinationFolder -- avoid duplicates
try
tell application "Finder" to make new folder at DestinationFolder with properties {name:the result}
set the end of the output to the result as alias
end try
end repeat
return output
end run
to GetUniqueName for SomeName from SomeFolder
check if SomeName exists in SomeFolder, creating a new unique name if needed
parameters - SomeName [text]: a name.extension to check for
SomeFolder [mixed]: a folder to check
returns [text]: a unique name
set {Counter, Divider} to {"00", "_"}
set Here to -(offset of "." in ((reverse of text items of SomeName) as text)) - 1
set TheName to text 1 thru Here of SomeName
if Here is -1 then -- no extension
set TheExtension to ""
else
set TheExtension to text (Here + 1) thru -1 of SomeName
end if
set NewName to TheName & TheExtension
tell application "System Events" to tell (get name of items of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & TheExtension
end repeat
end tell
return NewName
end GetUniqueName</pre>
- the output from the Run AppleScript action is a list of aliases to the folders created, if you want that information to do something with.

Dynamic action with set value on date field

Hi,
I'm using APEX 4.02
I'm trying to calculate the age based on the date of birth dynamically on a form. I'm trying to do this with a (advanced)dynamic action with set value.
I'm able to get this kind of action working based on a number field etc, but NEVER on a date field.
I've read all posts on this subject but so far no solution. Even if I try to simply copy the value over to another date field or typecast it to a string ( to_char function ) it does not work. So for me the problem seems to be in the source field being a date field.
I've tried using the source value as is in a select statement :
select :P33_GEBOORTEDATUM from dual;
and also type casted based on the date format :
select TO_DATE(:P33_GEBOORTEDATUM,'DD-MON-YYYY') from dual
but still no luck.
On the same form I don't have any issues as long as the calculation is based on number fields, but as soon as I start using dates all goes wrong.
Any suggestions would be greatly appreciated. If you need any extra info just let me know.
Cheers
Bas
b.t.w My application default date format is DD-MON-YYYY, maybe this has something to do with the issue .... ?
Edited by: user3338841 on 3-apr-2011 7:33

Hi,
Create a dynamic action named "set age" with following values.
Event: Change
Selection Type: Item(s)
Item(s): P1_DATE_OF_BIRTH
Action: Set value
Fire on page load: TRUE
Set Type: PL/SQL Expression
PL/SQL Expression: ROUND( (SYSDATE - :P1_DATE_OF_BIRTH)/365.24,0)
Page items to submit: P1_DATE_OF_BIRTH
Selection Type: Item(s)
Item(s): P1_AGE
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

Dymanic action with jQuery selector not working in version 4.2.2

Hi,
We’re in the process upgrading to APEX version 4.2.2. We have an issue is with a report with a link that’s firing a dynamic action with a jQuery selector.
The first sequence in the dynamic action is Confirm. When we click the link in the report it’s supposed to popup a confirm “Are you sure you want to save?"
When we click the link nothing happens. This works in our current version 4.0.1, but not in 4.2.2. Do you have any ideas?
Thanks,
Joe

change the
in the url to
javascript:void(0);
The reason for your issue is that the default action of the anchor tag is not prevented and thus navigation occurs. A confirm action will return true or false, and execution of further true actions will stop when selecting cancel but this will still not prevent the default action from occuring. Similarly a cancel event true action is not adequete as this has to be run after the confirm so not accounting for the execution-stopping cancel of the confirm.
That javascript in the url is some good ol' "hack". It'll run that javascript instead of performing a navigation and void(0) just does nothing, and the click dynamic action will be unaffected.

Hiring action with reference Pernr via HR_MAINTAIN_MASTERDATA

Ciao,
I need some help to solve the following problem:
I get all needed data for an hiring action via external interface and need to perform the hiring action with HR_MAINTAIN_MASTERDATA by passing a reference personel number to the function.
my problem: theres no chance to pass the parameter RFPNR to HR_MAINTAIN_MASTERDATA and so the function does not link the new PERNR to the CP of the RFPNR
therefore, the function creates a new employee with a new central person (CP) instead of linking the new employee to the central person of the passed RFPNR and copying the relevant infotypes
my question: does somebody know how to make HR_MAINTAIN_MASTERDATA work with the reference Pernr (RFPNR) ?!
alternatively I could delete the link between the new employee and it's (new) central person, insert a new link between the central person of the referenced employee and the new employee and delete the crfeated central person of the new employee.
as result I would have correct links to the CP BUT I'm facing the problem, that the infotypedata of the CP was not taken over to the new linked employee ...
is there any function or report, that copys relevant data (infotypes) from a central person to it's linked employees (PERNRs) ?!
would be nice if anyboday could help me or give me a small hint
thanks,
Markus

I found the solution by myself ....
Problem: hr_maintain_masterdata crashes with shortdump while writing an hiring action.
Cause: we implemented infotype enhancements via userexit where parameter VIEKN is queried. The parameter VIEKN is saved in infotype 3. In LUW-mode 3 theres no existent IT0003 when hiring a person (because nothing is written to database) that causes the shortdump ...
solution (workaround): First I have to call maintain_masterdate just with infotype 0000 (without reference pernr!) ... that triggers the creation of it0003 by the system itself ... then I have to call a second maintain_masterdata with all the other infotypes of the action and everything works fine! Now the new person is in the system and while creating the person, the system also created a new central person and a link between the new CP and the new person.
after doing this (and did'nt get any failure!) I have to determine the central person (CP) of the referenced person, making a new link between the new person and the referenced persons CP, deleting the link between the new person an d the new CP, deleting the new cp and every thing works fine!!!! the reason for this is: infotype 31 just shows the "links" that are defined in OM
if anybody is interested in more details, just contact me
Edited by: Raabiat on Apr 4, 2011 11:35 AM

Reporting action with a parameter

Hi,
I am having an issue setting up a reporting action with a parameter. The report I am trying open
is non-cube based database report. I tried a few syntax variations for
the parameter value such as:
UrlEscapeFragment( [Dimension].[Attribute].CurrentMember.Name)
UrlEscapeFragment( [Dimension].[Attribute].CurrentMember)
UrlEscapeFragment( [Dimension].[Attribute].CurrentMember.Value)
UrlEscapeFragment( [Dimension].[Attribute].CurrentMember.UniqueName)
But non of them seems to work.
The action disappears ones I set the
parameter.
What am I doing wrong?
Thank,
Sasha

see this
Report Navigation from SSAS
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Button action with onclick in a jsp page using Jscript

hi,
I am facing a problem in setting an action with a button in a jsp page the error is object does'nt support this function,kindly send me reply as soon as possible.
Santhosh

hi,
I am facing a problem in setting an action with a button in a jsp page the error is object does'nt support this function,kindly send me reply as soon as possible.
Santhosh

Associate Action with jcombobox item

Is it possible to associate a particular Action with a jcombobox item (for example using setAction()). When the user selects a particular item of jcombobox, the Action must be triggered.
regards,
Nirvan.

Hi,
You can associate a particular action with a JComboBox. As per my understanding u can add one action perfrom action to combobox or itemStateChanged action
if u add action perform action, u need to add the following method to ur logic.
JComboBox combobox=new JComboBox();
    combobox.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
         JComboBox combo = (JComboBox)evt.getSource();
            if(combo.getSelectedItem().equals("LOCATION")) {
            A a = new A();
            a.show();
        } else if(combo.getSelectedItem().equals("HOUSE")) {
            B b= new B();
            b.show();
        });if action is ItemStateChanged then add the following method.
combobox.addItemListener(new java.awt.event.ItemListener() {
            public void itemStateChanged(java.awt.event.ItemEvent evt) {
                and write your logic here which one needs to be triggered when this action performed.
        });Hope this will help to you....
Thanks & Regards,
Maadhav..

Custom action with XML type input and output parameter.

Hi,
I want to develop custom action with xml type input and/or output parameter.
Is there sample code for java side. How is the definition of input and/or output parameter and set/get methods?
does it need special .jar file to develop custom action like this?
Thanks.

Cemil - yes, you can use XML data types. Use the class
com.sap.lhcommon.xml.XMLDataType
for your parameter type. Here is a snippet from a custom action we use to log XML (instead of just returning the #text node like the default logger does):
public class XMLLogger extends ActionReflectionBase
    private String source;
    private String eventType;
    private String textMessage;
    private XMLDataType xmlMessage;
    public XMLLogger()
        log = new Logger("UserLog");
        source = DEFAULT_SOURCE;
        eventType = TYPE_INFO;
        textMessage = "";
        xmlMessage = new XMLDataType();
    public XMLDataType getXmlMessage()
        return xmlMessage;
    public void setXmlMessage(XMLDataType xmlMessage)
        this.xmlMessage = xmlMessage;
    public void Invoke(Transaction transaction, ILog ilog)
        StringBuffer sb = new StringBuffer();
        sb.append('[');
        sb.append(source);
        sb.append("] ");
        sb.append(textMessage);
        sb.append(XMLUtils.convertXmlToString(xmlMessage));
XMLUtils is a helper class we wrote - it's just a bunch of standard Java XML boilerplate code. The important part you need to know is XMLDataType.getDocument() will return an org.w3c.dom.Document.
I hope that was enough information to help.
-tim

Action with back date

Dear friends
Transfer action is performed on a date, after performing the transfer action, with the back date employee got the promotion and again promotion action is performed.
Then from the date of promotion to transfer date, emp group and sub group are showing correctly, but from the date of transfer the emp group and sub group showing the old values.
For example:
Employee group and sub group are 1 and a1 respectively.
Transfer action is performed on 1.4. 2011.
Now after performing this transfer action, say for example with the back date, promotion action is performed say from 1.6. 2010. employeeu2019s emp group and sub group changed to 2 and a2.
Now the data in IT 1, the record shows as emp goup and sub goup as 2 and a2 corrctly from 1.6. 2010
But from the record from 1.4. 2011, instead of showing the emp group and sub goups as 2 and a2 sys showing the values as 1 and a1.
Regards
Kiran

Dear friends
Transfer action is performed on a date, after performing the transfer action, with the back date employee got the promotion and again promotion action is performed.
Then from the date of promotion to transfer date, emp group and sub group are showing correctly, but from the date of transfer the emp group and sub group showing the old values.
For example:
Employee group and sub group are 1 and a1 respectively.
Transfer action is performed on 1.4. 2011.
Now after performing this transfer action, say for example with the back date, promotion action is performed say from 1.6. 2010. employeeu2019s emp group and sub group changed to 2 and a2.
Now the data in IT 1, the record shows as emp goup and sub goup as 2 and a2 corrctly from 1.6. 2010
But from the record from 1.4. 2011, instead of showing the emp group and sub goups as 2 and a2 sys showing the values as 1 and a1.
Regards
Kiran

Action with script not working today!

HELP! I have an action with a script in it that I use daily. Today I get an error message that says
Error 8800: General Photoshop error occurred. This functionality may not be available in this version of Photoshop. -<no additional information available> Line:18 -> AD.saveAs(saveFile, saveOptions, true, Extension.LOWERCASE);
What do I do next?? As far as I know nothing has changed on the computer since yesterday morning when it was fine.
Photoshop CS4 on an Imac.
Okay, I figured out how to attach a screen shot.

This error is generated by the script because it can not save the document for some reason. Without seeing the script it is hard to give you an answer.
It could be that the document you were working on had not been saved previously, so there was no path.

Action with conditions

Similar Messages

Maybe you are looking for