Converting a group of 1-D arrays to one 2-D array.

I want to build a 2-D array out of multiple 1-D arrays so that I can wire the 2-D array to the "Write to Spreadsheet File.vi" function. I searched the Array palette endlessly with no luck...any ideas?

AS Luca suggested the buid array will increase the dimension of your data type by 1-d.
I believe there is anoher input to the "Write to ..." that accepts a 1-d input.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How do I convert a group summary average from seconds to DD:HH:MM:SS

I am new to Crystal Report XI. I have a column with seconds as values. I grouped the column to get an average seconds value per group. How do I convert the grouped average seconds to DD:HH:MM:SS?
Thanks,
Mike

Hi Mike,
Here's a formula from Ken Hamady's website:
NumberVar TotalSec := {YourTable.TotalSeconds};
NumberVar Days    := Truncate (TotalSec / 86400);
NumberVar Hours   := Truncate (Remainder ( TotalSec , 86400) / 3600) ;
NumberVar Minutes := Truncate (Remainder ( TotalSec , 3600) / 60) ;
NumberVar Seconds := Remainder (TotalSec , 60) ;
Totext ( Days ,    '##' ) + ':' +
Totext ( Hours ,   '00' ) + ':' +
Totext ( Minutes , '00' ) + ':' +
Totext ( Seconds , '00' )
-Abhilash

Convert InfoPackg Group

In BW 3.5 ->RSA1 ->Administraction ->InfoPackages, I click on the InfoPackage Group Sales Cube, I have 5 InfoPackages.
Sale Cube 2001
Sale Cube 2002
Sale Cube 2003
Sale Cube 2004
Sale Cube 2005
What does it mean is if I run this InfoPackage Group, all the 5 InfoPackages will be triggered right?
I would like to convert this InfoPackage Group into Process Chain, So I:
1) Double-click on the InfoPackage Group Sales Cube
2) The Scheduler (Maintain InfoPackageGroup) open up. I click on the Process Chain Maint button
3) Enter the Process Chain Name as SaleCube.
4) In the Process Chain screen, I see the Process Chain SaleCube created with the 5 InfoPackages.
5) However, all this 5 InfoPackages not appear/link at the same level or right sequence. It is:
     Start Process
     Sale Cube 2001
     Sale Cube 2002
     Sale Cube 2003
     Sale Cube 2004
     Sale Cube 2005
So Sale Cube 2002 is depend on Sale Cube 2001 etc, Why? I thought all the 5 InfoPackages should appear under the Start Process right?

HI,
Have to include all the infopackages from your IP group individually in the process chain. Include the infopackages in the same order as in the IP group.
set delay time (as in IP group) for some of the infopackage execution using "wait" time option in the process chain.
set the option for " when to execute which infopackage" - whether on success of the earlier IP or failure or always execute in the process chain.
Re: Process chains
Re: Regarding Converting Inofpackage Groups to Process Chains
Process Chain?
Thanks/Tarak
Edited by: Tarak on Jan 12, 2009 7:08 AM
Edited by: Tarak on Jan 12, 2009 7:18 AM

Converting a PNG image to an array of bytes and vice versa..

hi all,
i need to convert a PNG image to an array of bytes ,then converting back this array of bytes to The PNG image again ,i read this can be done using output streams but i feel like a dump and i can't fix the whole thingy out ! ,can anybody help me in this ,by explaining how can this be established????
Regards,
D.Roth

hi all,
i need to convert a PNG image to an array of bytes ,then converting back this array of bytes to The PNG image again ,i read this can be done using output streams but i feel like a dump and i can't fix the whole thingy out ! ,can anybody help me in this ,by explaining how can this be established????
Regards,
D.Roth

How do I convert an ASCII character to an array of co-ordinates.

I need to convert and ASCII character to an array of X, Y co-ordinates. I also need to be-able to vary the size of the text (scale of graph i suppose) and position on the graph So i can desplay multiple characters on a graph. However it needs to be stored in an array (or set of arrays) so i can isue these co-ordinates to an instrument.

Maybe the attached VI can help. Using picture control functions, it get the
1bit bitmap of the character/text
on input in a 2D array of booleans.
Jean-Pierre Drolet
"m0mbaj0mba" a écrit dans le message news:
[email protected]..
> I am trying to find a simple way to convert a letter (ASCII character)
> into an array of X,Y co-ordinates. I am involved in two projects that
> involve spelling letters with lasers. At the moment we are plotting
> the points on a graph in excel, transferring the co-ordinates into a
> text file and then converting the content of these text files into a
> set on 1D arrays. As I am sure you can appreciate this is a very long
> winded process. Is there anyway of pl
otting points on an X,Y, graph
> and outputting those points to an array or set of arrays?
>
> Excel spreadshett is attached.
[Attachment GetTextBitmap.vi, see below]
LabVIEW, C'est LabVIEW
Attachments:
GetTextBitmap.vi ‏45 KB

How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???

Hi BW Gurus,
How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???and what are the
measures i need to take care before doing the same .
prasad

Hi,
Simply add these infopackage groups into process chain and schedule the process chain.
Hope this helps.
Assign points if useful.
Regards,
Venkat

Good day, I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.

Good day,
I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?

Good day abrieb93050306,
I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
This will probably resolve your issue.
Let me know if you still experience any issue.
Regards,
Aadesh

How to disbale a group of checkboxes when i select one check box WEBDYNPRO

Hi Friends,
Can any body help me how to disbale a group of checkboxes when i select one check box WEBDYNPRO Abap
Also can any body tell me how to handle chain endchain type of scenario in WEBDYNPRO Abap
Thank you..
Sai

Hi
In the context tab , create 2 context attributes ca_attr1 and ca_attr2   of type WDY_BOOLEAN under a context node cn_node
now in ur Layout , bind the ENABLE property of CheckBoxGroup UI Element with this attribute ca_attr1
bind the ENABLE property of CheckBox UI Element with this attribute ca_attr2
create a action for ur Checkbox , for the OnToggle property of ur checkbox
in OnactionToggle , check if ca_attr2 is 'X' , set ca_attr2 to ' ' ( for disable)
this can be done by code wizard , press control +f7 and use read/set context attributes , use get_attribute and set_attribute methods
// if ca_attr2 is 'X'
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr2.
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   get single attribute
    lo_el_cn_node->get_attribute(
      EXPORTING
        name = `CA_ATTR2`
      IMPORTING
        value = lv_attr ).
// if lv_attr2 is 'X' , use set_attribute method for ca_attr1
IF lv_Attr EQ 'X' .
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr.
*   navigate from <CONTEXT> to <CN_VISIBLE> via lead selection
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   set single attribute
    lo_el_cn_node->set_attribute(
      EXPORTING
        name = `CA_ATTR1`
        value = ' ').
ENDIF.
regards,
amit

How can I forward a mail to multiple mail accounts that I have in a group without having to add them one by one?

How can I forward a mail to multiple mail accounts that I have in a group without having to add them one by one?

I don't think that you can. Yahoo's basic email features do not include mail forwarding.

Convert PLD to Crystal Report for SAP Business One 9 or higher

Hi Experts
Please guide me how to convert PLD to Crystal Report for SAP Business One 9 or higher... I have tried to use B1 Crystal Converter for 8.8, but its not working with SBO 9... So please guid as per SBO 9.
Thanks in advance...

Hi,
Check this thread:
http://scn.sap.com/thread/3391875
Thanks & Regards,
Nagarajan

Consumer Group/Resource Plan to use only one instance of a RAC

What would be the way to create a Consumer Group/Resource Plan to use only one instance of a RAC? I have 10.1.0.5 database
running on 10.1.0.5 RAC.
Thanks,

You should use "services" to limit workload to just one specific node of RAC:
http://download.oracle.com/docs/cd/B14117_01/server.101/b10739/create.htm#sthref400

HT3529 How do I create a group to message several people at one time?

How do I create a group to message several people at one time and keep it in my contacts to use frequently? Such as co-workers or family member groups?

GContacts is for both the iPhone and iPad. It can be found in the US App Store. Don't know what country you're in so I can't say for sure you can find it in your App Store. If you do a search on "contacts" in your App Store you should be able to find some contact manager apps.
There is a way to create a contact with a group of email addresses.
1. In Notes app create a list of email addresses separated by a comma. Example [email protected],[email protected] Highlight the list and copy.
2. In Contacts create a new contact and give it the name of the group you want.
3. In the email field paste the list of email addresses.
Note: you are probably wondering why you have to copy and paste the addresses into the email field. If you try to type the list into the email field, you will find that there is no way to type a comma in this field.
4. Save the contact.
5. When you create an email, select the group entry from contacts.
You may get a message that the email address is invalid, but ignore the error, because the email should still be sent to all addresses.

TS1649 Hi, can I merge the contacts groups on my iPhone 4 into one group?

Hi, can I merge the contacts groups on my iPhone 4 into one group?

You can't merge chat threads.

FM to create equipment task group counter by copying the existing one.

Hi Experts,
I need FM to create equipment task group counter by copying the existing one.
Manully we do this through the Tcode : IA01 but i want to do this through the Prog... for that i wrote one bdc it is creating some problem.
Please let me know any FM avaliable IN 4.0B
its very urgent please help me..
Regards,
Kali Pramod

try this /ISDFPS/TASKLIST_CREATE

How to export ALL my contact groups ( 20) from Outlook 2010 on one machine to Outlook 2010 on two other machines

My problem is how to export ALL my contact groups (>20) from Outlook 2010 on one machine (finally established with great pains from a more user-friendly client) to Outlook 2010 on two other computers. All the help files I've seen refer to
export/import of only a single Group.
Outlook seems to be an extraordinarily limited and user-hostile environment for managing an address book. By way of comparison, the Mulberry client I've been using for years (which is no longer supported) run circles around Outlook for ease of
handling -- everything in the address book, groups and individual, can be exported and imported in a single file. My computer support staff have warned me about the difficulties of handling groups in Outlook. Is Microsoft really that incompetent,
or just sadistic ?
Thanks for your help with this.

After a lot of screwing around I finally hit on a solution, which is to export and import contacts using a .pst file (which transfers both individuals and groups) rather than a .csv file -- which transfers only individual contacts but leaves groups untouched.
Why isn't there a clear and simple message from Microsoft saying this in all the so-called Help files on moving contacts in Outlook?

Converting a group of 1-D arrays to one 2-D array.

Similar Messages

Maybe you are looking for