Converting modbus data from two registers into float

I am reading modbus data from a DUT from two holding registers- 40609 and 40610. The register content I get is an array of two elements (12458, 14019). I want to convert these numbers into a floating point value. Does modbus library has a VI that does it? If not, how do you convert it?
Thanks!
Solved!
Go to Solution.

Like this
That is join numbers and also typecast.
Attachments:
sample1.png ‏11 KB

Similar Messages

Retrive data from two tables into one internal table.

Hi SDN,
I am downloading the Assets data from two tables ANLA,ANLZ.
there is a common field ANL1in both tables and i have to retrive the data by using anl1 into the internal table.
can you please send me the SELECT Syntax for this probl.....
Thank you & Regards,
Manoj

Hi manoj,
Please see the following sample code. But kindly don't use join as it may hamper ur performance. No trouble in using two select query.
data: begin of itab occurs 0,
        BUKRS like anla-BUKRS,
        ANLN1 like anla-ANLN1,
       BDATU like anlz-BDATU,
        end of itab.
select anlabukrs anlaANLN1 anlzBDATU into corresponding fields of table itab from anla inner join anlz on anlaanl1 eq anlz~anl1 where (logexp).
Please come back for any clarification.
Thanks and Regards,
saurabh

Unable to consolidate data from two DSOs into an InfoCube for reporting.

Hello Experts
I am working on BW 7.0 to create BEx Report as below:
This report will have data coming from two different sources, some data from COPA DSO [such as Customer Number, Product Hierarchy1, Product Hierarchy2, Product Hierarchy3, Product Hierarchy4. Product Hierarchy5, Product Hierarchy6 and a few other Key Figures] and the rest [such as Product Hierarchy, Reference Document, Condition Type (both Active & Inactive), Condition Value and a few other Key Figures] from another DSO (ZSD_DS18) which is a copy of the BCT DSO (0SD_O06). I've chosen this DSO because this is the BCT DSO which is used to store data from a Standard Extractor 2LIS_13_VDKON.
Below are the screenshots of these 2 DSOs:
I have successfully extracted the data from 2LIS_13_VDKON (includes PROD_HIER but not Customer Number) and loaded into a DSO (ZSD_D17).
All the testing is done using only one Sales Document No (VBELN).
First test that I tried is.. to create an Infocube and loaded data from ZCOPA_01 and ZSD_DS18 and when the LISTCUBE was run on this InfoCube, the data is coming up in two different lines which is not very meaningful. Screenshot below:
Therefore, I have created another DSO (ZSD_DS17) to Consolidate the data from ZCOPA_01 & ZSD_DS18 establishing mappings between some of common Chars such as below:
ZCOPA_01                    ZSD_DS18
0REFER_DOC <->        0BILL_NUM
0REFER_ITM    <->        0BILL_ITEM
0ME_ORDER    <->        0DOC_NUMBER
0ME_ITEM        <->        0S_ORD_ITEM
51 records are loaded from ZSD_DS18 into ZSD_DS17 and 4 records are loaded from ZCOPA_01 into ZSD_DS17 for a particular Sales Document Number.
When I am using a Write-Optimized DSO, data is coming in just 1 line but it is showing only 4 lines which is aggregated which is as expected since W/O DSO aggregates the data. However, when I use Standard DSO, the data is again splitting up into many lines.
Is there something that I am missing in here while designing the Data Model or does this call for some ABAP being done, if so, where or should I have to talk to the Functional Lead and then Enhance the Standard Extractor, and even if I do that, I would still have to bring in those Key Figures from ZCOPA_01 for my reporting?
Thank you very much in advance and your help is appreciated.
Thanks,
Chandu

in your (current) InfoCube setup, you could work with "constant selection" on the key figures
for the COPA key figures, you'll need to add product hierarchy to the key figures with a selection of # and constant selection flagged
for the SD key figures, you'll have to do the same for customer & the product hierarchy levels (instead of product hierarchy)

How do I merge my Mail data from two Macs into one?

One is Lion and the other is Mountain Lion, both 27" iMacs. I have saved the Mail data from the Lion one and will reformat its HDD for a clean install of Mountain Lion. Then I plan to import a (CCC) clone of my newer iMac. I need to merge the mail because some mail items are missing on the clone that existed on the erased iMac.

Copy or move the song files from one account to a shared location and then drag them into the open iTunes window when logged into the other account.
(60844)

How to combine data from two rows into one row

I have the following sets of data. I want to find all the duplicate sets of field values. in the data below there is only one duplicate set: brenda, analyst, green.
DocID and Doc Seq combine to form the set key. FieldID I believe are consistent in that 1 is always name, 2 is job, 3 is favorite color etc. but there are up to 20 field IDs.
To tell you the truth, my client is a bit sketchy about the data and the values. I would like collapse the sets by getting all the field values into a single row. They could be in the same column, or in their own columns. This way I can then look for whatever
dups my customer seems to think that he has.
the first image is what i want (either in same column or in different columns. but they have to be in the order of the FieldID), the second is what i have. THANKS

CREATE TABLE #t (
c1 INT NOT NULL PRIMARY KEY,
c2 VARCHAR(50) NOT NULL
GO
INSERT INTO #t(c1, c2) VALUES(1, 'P1,P2,P3')
INSERT INTO #t(c1, c2) VALUES(2, 'P2,P3')
GO
-- Generate set of numbers
-- Idea from Itzik Ben-Gan
;WITH
L0 AS (SELECT 1 AS n UNION ALL SELECT 1),
L1 AS (SELECT 1 AS n FROM L0 AS a, L0 AS b),
L2 AS (SELECT 1 AS n FROM L1 AS a, L1 AS b),
L3 AS (SELECT 1 AS n FROM L2 AS a, L2 AS b),
L4 AS (SELECT 1 AS n FROM L3 AS a, L3 AS b),
Numbers AS (SELECT ROW_NUMBER() OVER(ORDER BY (SELECT 1)) AS Number FROM L4)
SELECT
t.c1,
t.c2,
SUBSTRING(',' + t.c2 + ',', Number + 1, CHARINDEX(',', ',' + t.c2 + ',',
Number + 1) - Number - 1) AS Item,
ROW_NUMBER() OVER(PARTITION BY t.c1 ORDER BY n.Number) AS rn
FROM
#t AS t, Numbers AS n
WHERE
n.Number <= LEN(t.c2)
AND SUBSTRING(',' + t.c2 + ',', n.Number, 1) = ','
ORDER BY
t.c1, rn
GO
DROP TABLE #t
GO
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Insert data from two rows into a single row in a new table

Hi
i have a table like the following
Deptno Dname      Salary
10     Computer     2000
10     Computer     4000
10     Computer     3000
10     Science     6000
10     Science 1000
10     Science     4000
10     Science     10000
I want to insert data into a new table like the following
Deptno MaxSalCom     Minsalcom MinSalSci     MaxSaSci
10     2000     4000      1000     10000
Deptno--As in Table1
MaxSalCom--Maximum salary for Dname " Computer"
Minsalcom--Minimum salary for Dname " Computer"
MaxSalSci--Maximum salary for Dname " Science"
MinsalSci--Minimum salary for Dname " Science"
Please help me how to go about it

with data as
(select 10 dno, 'Computer' dname, 2000 sal FROM dual
union all
select 10, 'Computer', 4000 FROM dual
union all
select 10, 'Computer', 3000 FROM dual
UNION all
select 10, 'Science', 6000 FROM dual
union all
select 10, 'Science', 1000 FROM dual
union all
select 10, 'Science', 4000 FROM dual
union all
select 10, 'Science', 10000 FROM dual
select dno, min(decode(dname,'Computer',sal)) min_sal_comp , max(decode(dname,'Computer',sal)) max_sal_comp,
min(decode(dname,'Science',sal))min_sal_sci , max(decode(dname,'Science',sal)) max_sal_sci
from data
group by dno;

How to merge the data from two cubes into ODS?

Hi,
I wan to analyze the data of both the cubes by means of merging into an ODS.
And i want to have one of the characteristic is used as a key for the purpose which is existing in both the cubes
Cany nay one detail me of how this can be done?
Thanks,
Ravi

Hi,
If it is very needful.
you can create the ODS object for each infocubes and map these ODS objects to target ODS object.
or, you can create the Export datasources from each infocube and map these to new target ODS object which is having all the char and KF of both the infocubes.
reg.
Vis

Retrieve of data from two columns into one column

For eg: i have a data in a table with columns A & B of same size
A B
1 2
2
3 1
4 2
5 3
6 5
7 1
8 4
9
10 8
Through a select i want the output of my data in one single
columns, Well I can do this by using union.
But my output should be like
if I select by condition where A=2
my output should be
2
1
3
7
4
because all these numbers are linked with 2 how do i do this
because it is like searching the number 2 in two columns and wherever this number 2 is linked i should get all the data relevant to it.
Hope u got my point what i exactly want
Can anyone help me it is quite urgent.
Regards
Vamsi Mohan

i do not a concatenated data
i have a data in a table with columns A & B of same size
A B
1 2
2
3 1
4 2
5 3
6 5
7 1
8 4
9
10 8
if my where condition is 'where A=2'
my output should be
1
2
3
4
5
6
8
10
i want my query to search as loop so that it keeps on searching
for related data as in my case it is
2 is linked to 1
1 is linked to 3
3 is linked to 4
my query should keep on seaching for linked numbers till
it does not find any mathing linked numbers
and the resulted output should come in one single column

Can I transfer Time Machine data from two separate hard drives into one new one?

I'm using a MacBook Pro as my primary computer. My 500 gig Time Capsule filled up a year or so ago, so I stopped using it with Time Machine for awhile so I could keep the data from those old back-ups. There were a number of things I deleted from my computer's very limited hard drive after they were backed up to the Time Capsule. I got a 1T external USB drive last year to use as my "filing Cabinet" to store files I didn't necessarily need all the time or that were filling up my small laptop hard drive--including my iTunes library--all organized in a way that made it relatively easy for me to find what I needed, even if I didn't remember exactly when I'd filed it or what I'd called it. I got another 1 terabyte external (portable) drive last July and dedicated it to TimeMachine backups and labeled it "TimeMachine".
Over the last couple of weeks, my friend has been helping me upgrade to Yosemite and clean up my laptop hard drive. Last week he cloned my laptop hard drive to a new 1T hard drive and I exchanged it for my old drive in my computer today. All good.
Here's the issue. We replaced my Time Capsule hard drive with a 1 terabyte drive with the idea of transferring the data from the old Time Capsule (500G) drive and the newer USB 1T "TimeMachine" compact drive to the new 1T Time Capsule drive and beginning using the latter for my Time Machine backups going forward. Originally he thought we could copy everything from each of my external drives (the old 500gig drive from my Time Capsule, the USB "TimeMachine" drive I've been using since July, and the "file cabinet" files) to my computer in their own folders and then start regular TimeMachine backups to the new Time Capsule drive, thus preserving all my old data and making regular backups going forward. The "file cabinet" data was no problem at all, but when I tried to copy my USB "TimeMachine" data to my computer, I was unable to. My friend found instructions for transferring old TimeMachine data to a new TimeCapsule, but I don't know if I can transfer the data from two separate disks to the new TimeCapsule drive. I'm afraid that one set of data will supersede the other and either my newer backups or my old ones will be lost if I try to transfer both.
Are my fears justified or is there a way to insure that no such problem will occur? Of course, my data will still be on those two older drives, but that won't do me a lot of good if I can't access it when I need to. Also, the 1T drive now belongs to my friend; he used a brand new drive he'd bought for himself for my new internal hard drive and plans to take my 1T "TimeCapsule" drive in exchange, once the data has been transferred, so he will, of course, erase that drive.

Should we be able to bring up the old (500G) Time Capsule Drive to rename it using a SATA to FireWire harness and then copy the whole thing to the new Time Capsule drive?
You can copy a whole sparsebundle from one drive to another. That is not a problem. Whether you can access the sparsebundle is something you should test before you even start though.
If it's on the Desktop and I don't tell Time Machine to exclude it from backups, will it just automatically back it up?
All drives you plug into the Mac are excluded by default.. you must include them. So no problems there.. but I hope I am understanding the question.
Will both volumes or directories (which is the right term?) show up when I open Time Machine?
No, Time Machine will only open what it is told to open... or its backup default location.
You can force Time Machine to open alternative/old/no longer used backups by (now I have a problem as things have changed somewhat in Yosemite and I consider it alpha release software at this point in time). The old method was to right click on the TM icon and select a different TM backup. easy. Yosemite seems to have made easy stuff harder.
Here it is on my current computer.. clearly not Yosemite.. Right click on the TM icon in the dock.. select Browse Other Time Machine Disks.. And supply the info of where that is located. Easy. If you cannot figure it out one of the other posters here (with more patience than me for Yosemite) will help you.
Or will we have to partition the new drive somehow--is that even possible?
I am getting more lost as I go down the list.. but the TC disk cannot be partitioned.
If you have included all those USB drives in the new backup on a Time a Time Capsule.. you have made life rather hard because now your files are stored another layer deeper than they were.
So to open a file from a disk you need to open the sparsebundle.. then dig down to the drive in question and then dig down to the backup.. and all of this means Time Machine has to work perfectly which is Yosemite is a very big ask.
I thought you wanted to just backup your old drives to central location.. which means copying the files to a separate folder on the Time Capsule.
One correction I need to make to my post, which will make my strategy make a bit more sense: my new Time Capsule drive is 4T
It makes it much harder.. and I have to pose a real question of long term .. if you have put a 4TB drive in a Gen1 TC.. did you also replace its power supply because I can assure you the drive might be ok but the TC itself will not last forever.. and what happens when it dies. The Gen1 power supply is already well beyond its normal life span and the vast majority are dead. When the backup device is unreliable and the backups on it are made that much harder to get access to.. is this a great plan??
If you are going to consolidate all your old files on one disk.. a task I find understandable. I have done much the same albeit the usefulness of files made on emac running OS9 may be questioned. A disk lying in the bottom of a draw is a more appropriate place for them.
You want those files as easily accessible as possible (at the point of recovery) and not buried inside a sparsebundle.. particularly not a sparsebundle from the old TC disk buried inside a new sparsebundle.. keep files as accessible as possible as you can run searches.. and that is best done on a USB 3 (or faster ie thunderbolt) drive plugged into a new(ish) computer.. not network. And since the files are not being accessed on a daily/weekly or even monthly or yearly basis.. keeping them in actively running TC network storage.. I would say is a waste of space. That is only my opinion of course.. you might consider it highly important that files you will never look at are available any time of day or night when the urge comes to track down that elusive pimpernel email you sent 10 years ago... but I find it hard to justify. What the case.. the problem with TM and things like Mail is you cannot search it.. you must restore the whole library/files/program even before you can access it.. that makes file recovery out of a sparsebundle double step process.
So.. summary.
If you want to store files on the 4TB drive in the TC.. that is not a great strategy but it can work.. simply create a folder named.. OldFilesEMac for instance.. and do a simple copy and paste of all the file to that location. Do not use TM.. Since you have already used TM.. and from what I am reading you have already done the backup with the external drives included.. then you are going to end up needing to erase the TC and start over.. which you may not be prepared to do.. which is fair enough. (I am coming across as overbearing school master.. apologies).
TM is to backup your main OS and current files.. not files from 10-20years ago.
Please do read the issues involved in Pondini..
See his FAQ. I recommend you read through Q14-17 so you understand what is involved in recovery.
http://pondini.org/TM/FAQ.html
I also recommend you read the first couple of articles here. http://pondini.org/TM/Home.html
Particularly so you understand the complexity of Time Machine.
And the articles here. http://pondini.org/TM/Time_Capsule.html
Particularly Q3 on mixing data and backups on a TC.
I wish I could spend an hour or two face to face and work it out.. the whole strategy to do this.. !!

How to upload the data from two sheets in one excel into SAP

Hi experts,
                My requirement is to upload the data from two sheets in an excel into an internal table.How can this be achieved.Is some OLE application has to be used?
Thanks
Abhishek

Hi
see this program will upload excel file to application.
*& Report ZSD_EXCEL2
REPORT ZSD_EXCEL2.
types: begin of ttab ,
      fld1(30) type c,
      fld2(30) type c,
      fld3(30) type c,
      fld4(30) type c,
      fld5(30) type c,
      end of ttab.
data: itab type table of ttab with header line.
selection-screen skip 1.
parameters: p_file type localfile default
            'C:\test.xls'.
selection-screen skip 1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
       exporting
            static    = 'X'
       changing
            file_name = p_file.
start-of-selection.
clear itab. refresh itab.
perform upload_data.
loop at itab.
    write:/ itab-fld1, itab-fld2, itab-fld3, itab-fld4, itab-fld5.
endloop.
* Upload_Data
form upload_data.
data: file type rlgrap-filename.
data: xcel type table of alsmex_tabline with header line.
file = p_file.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = file
            i_begin_col             = '1'
            i_begin_row             = '1'
            i_end_col               = '200'
            i_end_row               = '5000'
       tables
            intern                  = xcel
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
loop at xcel.
    case xcel-col.
      when '0001'.
        itab-fld1 = xcel-value.
      when '0002'.
        itab-fld2 = xcel-value.
      when '0003'.
        itab-fld3 = xcel-value.
      when '0004'.
        itab-fld4 = xcel-value.
      when '0005'.
        itab-fld5 = xcel-value.
    endcase.
    at end of row.
      append itab.
      clear itab.
    endat.
endloop.
endform.

How to I convert data from oracle database into excel sheet

how to I convert data from oracle database into excel sheet.
I need to import columns and there datas from oracle database to microsoft excel sheet.
Please let me know the different ways for doing this.
Thanks.

asktom.oracle.com has an excellent article on writing a PL/SQL procedure that dumps data to an Excel spreadsheet-- search for 'Excel' and it'll come up.
You can also use your favorite connection protocol (ODBC, OLE DB, etc) to connect from Excel to Oracle and pull the data out that way.
Justin

Loading consolodated data from two excel files / cube into one infocube

Hi Friends,
I am receiving data from two sources:
Source 1:
Customer Product Location                          Keyfig(Budget)
C1            P1          L1                                     100
C2            P1         L1                                      200
C1           P2          L1                                      300
Source 2:
Product     Location                        KeyFig (Actual)
P1               L1                                           320
P2               L1                                           350
I want to combinedata from two sources (or cubes) into one cube as follows:
Customer      PRoduct       location          Budget            Actual
C1                 P1                 L1                  100                 320
C2                 P1                L1                   200                 320
C1                P2                L1                   300                   350
I tried by creating multiple data sources / infosources / transformations / updates rules and also tried with both DSO and cube. But the records are always getting updated as follows:
Customer      PRoduct       location          Budget            Actual
C1                 P1                 L1                  100                 320
C2                 P1                L1                   200                 320
C1                P2                L1                   300                   350
                    P1               L1                                           320
                   P2               L1                                           350
Can you help me figure out if this is possible? If yes, how can I do it.
Thanks a lot in advance.

Hi,
Please use the below approach.
Load the budget data in ODS1.
Load the actual data in ODS2.
Create a ODS3 with same structure as ODS1 with additional key figure for Actuals,which will get data from ODS1. Here add a look up based product and location to populate actuals.
Start Routine
SELECT * FROM ODS2 into ITAB
FOR ALL ENTRIES in SOURCE_PACKAGE.
Transformation Routine:
Read table ITAB into WATAB
with key location = <source_fields>-Location
product = <source_fields>-Product.
If sy-subrc = 0.
RESULT = WATAB-ACTUAL.
ENDIF.
-Vikram

APEX Application accessing data from two different databases

Hi All,
Currently as we all know that APEX Application resides in database and is connected to the schema of that database.
I want APEX Application to be running and accessing data from two different databases. Elaborating my question,
Currently, my APEX Production Application is connected with XXXX Schema of DB1 Database(Where APEX Resides). Now I want to add some pages into this APEX Application for REPORT Purpose, But I want to connect this REPORT APEX Pages to get data from Different Schema YYYY for Database DB2.
Is it possible to configure this scenario?
The reason for doing this is to avoid the REPORT related (adhoc queries) resource utilization effect on Production DB1 Database.
Thanks
Nil

1. If you do the joining of two or more tables in DB1 then all data is pulled over to DB1 and then the join is executed: so more data over the databaselink and more work for DB1. Better keep the joining stuff where the data resides and just pull exactly that data over that you need.
2. Don't know about your different block sizes. Seems a nice question for one of the other forums (DBA or SQL).
3. I mean create synonyms on DB1 for reports VIEWS in DB2.
Hope all is clear!

To Select the data from two table one is transp table and onther is cluster

Hi All,
I want to select the data from two tables
Here i am giving with an example.
Fileds: kunnr belnr from bseg. table bseg
fields: adrnr from kna1     table: kna1.
Know i want to put these into one internal table based on kunnr and belnr.
Thanks in advance.
Ramesh

Hi,
   U cant use joins on cluster table and BSEG is a cluster table so use FOR ALL ENTRIES for taht
refer this code
*&      Form sub_read_bsak
      text
--> p1        text
<-- p2        text
FORM sub_read_bsak.
*--Select data from BSAK Table
SELECT lifnr
         augdt
         augbl
         gjahr
         belnr
         xblnr
         blart
         dmbtr
         mwskz
         mwsts
         sgtxt
         FROM bsak
         INTO CORRESPONDING FIELDS OF TABLE it_bsak
         WHERE belnr IN s_belnr
         AND   augdt IN s_augdt.
IF sy-subrc EQ 0.
*--Sort table by accounting document and vendor number
    SORT it_bsak BY belnr lifnr.
ENDIF.
ENDFORM.                    " sub_read_bsak
*&      Form sub_read_bseg
      text
--> p1        text
<-- p2        text
FORM sub_read_bseg.
IF NOT it_bsak[] IS INITIAL.
*--Select data from BSEG table
    SELECT belnr
           gjahr
           shkzg
           kostl
           hkont
           ebeln
           ebelp
           FROM bseg
           INTO CORRESPONDING FIELDS OF TABLE it_bseg
           FOR ALL ENTRIES IN it_bsak
           WHERE belnr EQ it_bsak-belnr
           AND   gjahr EQ it_bsak-gjahr
           AND   shkzg EQ 'S'.
    IF sy-subrc EQ 0.
*--Sort table by accounting document
      SORT it_bseg BY belnr.
    ENDIF.
ENDIF.
ENDFORM.                    " sub_read_bseg

Saving the data from two info path forms in to a single list in share point 2010

Hi ,
I have two info path forms are in share point page FM 1 and FM 2.
In FM 1 I am getting data from lists by using drop down and casket drop down and FM 2 i need to enter manually after entering
i want to save both forms information(FM 1 & FM 2 ) in to a single list of share point 2010
If any knows the solution please reply me
Thanking You,
Arun Darly

Hi，
Based on your description, my understanding is that you want to save the data from two info path forms in to a single list in share point 2010.
We can't save the data from two info path forms in to a single list, but we can
save the data from two info path forms in to a single library.
Open the FM 1 and FM 2 in Infopath(you have save it Locally once).
Publish the FM 1 and FM 2 as content types named FM 1 and FM 2.
Add the content types FM 1 and FM 2 into a document library, Then you can save the data
from two info path forms in to a single library.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Converting modbus data from two registers into float

Similar Messages

Maybe you are looking for