Converting webi reports into Xml

Hi all ,
Can we convert the BO Edge 3.1 Webi reports into XML Format?
Pls suggest me a solution and if we can convert, pls describe the procedure to be followed inorder to convert the reports into xml files?
Thanks in advance,
Thanks & regards,
Amrita.B

Hello,
While this is not possible (directly) for the entire report, you could do one of the following:
1. If you're on SP2 (or higher), you could publish Webi Report Content as a web service. There is more information in the pdf at http://help.sap.com/businessobject/product_guides/boexir31SP2/en/xi31_sp2_webi_rich_en.pdf (pg 304) .
2. Use QAAWS to publish queries used in the report as web services.
Best,
Srinivas

Similar Messages

Webi report into HTML format

Hi Frns,
I wanna convert webi report into html format...
Is there any possibility in bo???
I'm using sap bo 4.1 sp2
Regards
Riaz

Hi Riaz,
As per my knowledge Webi report export to HTML format is not possible in BI 4.1
You can raise a request in SAP IDEA's place
Refer the below links for workaround solution
[WebI XI 3.x] Export report to HTML or XML
Does BOE XI 3.1 supports exporting WebI to XML format?

Convert abap reports into crystal reports

Hi,
We are trying to convert abap reports into crystal reports.We could convert these reports into XML files
Now we want to create utility which will automate the conversion of XML files into RPT files of crystal reports.Later on we can refresh the data in reports by changing the datasource location.
Can you please guide us whether it is possible and if yes how should we go about it?
regards,
shital

Hi, i suggest, 2 technies to do this, the first one, you can use,
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
    APPLICATION            = 'C:\Program Files\crystalreports.exe'
EXCEPTIONS
    CNTL_ERROR             = 1
    ERROR_NO_GUI           = 2
    BAD_PARAMETER          = 3
    FILE_NOT_FOUND         = 4
    PATH_NOT_FOUND         = 5
    FILE_EXTENSION_UNKNOWN = 6
    ERROR_EXECUTE_FAILED   = 7
    SYNCHRONOUS_FAILED     = 8
    NOT_SUPPORTED_BY_GUI   = 9
    OTHERS                 = 10.
where, exe file could be, a crviewer.exe, and, use a parameters ( on exe ) to indicate rpt file, or, define of standar mode, a generic name and put, xml file generated via abap, on a repository, this way, rpt file, when launched, displaying file.
the second choice, could be, go SM69, click create. enter a command name 'ZCREXE', enter the path and the exe file name in operating system command field. You can call this exe from ABAP using SXPG_COMMAND_EXECUTE.
i hope so that my answers help you.
greetings.

Conveting a BO report into XML format

Post Author: Gunjan
CA Forum: Integrated Solutions
Hi,
We have a requirement to convert BO Report into XML format.
Could you please help if there is any tool available to directly convert BO report into an XML based on a predefind XSD.
Thanks
Gunjan

Post Author: Gunjan
CA Forum: Integrated Solutions
Hi,
We have a requirement to convert BO Report into XML format.
Could you please help if there is any tool available to directly convert BO report into an XML based on a predefind XSD.
Thanks
Gunjan

How to Convert Oracle Apps Report into XML Publisher

Hi
How to Convert Oracle Apps Report into XML Publisher?
Thanks

In Brief :
Re: XML Publisher
In Details :
http://www.oracle.com/technology/products/xml-publisher/docs/XMLEBSRep.pdf

Convert Web Report to PDF

Hi all,
I need a possibility to <b>convert Web Reports</b> designed in WAD <b>into PDF</b>. SAP help portal says: 'You access BEx Web applications and reports in the portal. You can then convert these into PDF files and print them.' (http://help.sap.com/saphelp_nw04s/helpdata/en/03/d8c041a227ca17e10000000a155106/frameset.htm)
But I haven't found any documentation how to do this...could anyone please help me? Thanks in advance.
Best regards,
Dominik

Hi Dominik,
You will need to add a URL or button group to your template and use the command wizard to create the command ("Export Web Template"). You should be able to find more information in the SAP Help documentation for SAP NetWeaver 2004s, which I know you already have a link to.
If you are on a ramp-up project, you should have access also to the Ramp-up Knowledge Transfer (RKT) in the SAP Service Marketplace at service.sap.com/rkt-netweaver. This site contains materials that explain the new features, including the new web items and the command wizard. If you don't have access, check with your SAP consultant for assistance.
Regards,
Katie Beavers
SAP NetWeaver Product Management

Export of WebI reports to XML in BO4.1

Hello,
I've seen some of BO What's New presentation stating that export of WebI reports to XML is possible in BO 4.1. However, my standalone client (4.1 SP1) does not offer this function.
My question thus is, whether export to XML is really possible, and if it is, which SP will we need for that.
Best regards,
Petr Götz

Hello Victor,
This is the webcast which states XML as a possible export format. It even states that XML export was already available in 4.0SP5, which is clearly not true:
What is new with Web Intelligence BI 4.1 – Part 1, Developer Support ASUG Webcast
See Figure 3.
Export to XML would be highly appreciated for our project, since we will need to export the report structures and then import them to a custom-coded application.
If XML export is not currently supported, is it at least planned for some of the next SPs to be released in near future?
Best regards,
Petr

How to convert Oracle reports into excel?

How can we convert Oracle reports into excel.
i know there was a thread on this topic which i am not able to find.
give the link / help.

I found Std Oracle Report output to Excel Sheet has some suggestions. Not being a Reports person anymore I am not in a position to vouch for them.
How did I find this thread? By not using the forum search tool but using Google instead.
Cheers, APC

Convert gzip files into XML format

We have a requirement where we receive gzip files. These files are zipped file containing base64 binary format csv files. We would have to convert these files into XML format. Please let me know any of the following.
1. Is there any Xpath query or XSL function (somthing similar like doTranslateFromNative() ) to convert from gzip files to XML format.
2. If we need to unzip the zipfile outside fusion, then java code piece to unzip the gzip file. I guess after that we can use the usual doTranslateFromNative() function to translate to XML format, since after unzipping the gzip file, they are base64 binary formats.
Thanks in advance,
Toms

There is an option to do pre-processing and post processing of Files when using File adapter. You need to create a valve which will first do pre processing and send the output to FileAdapter.
You can get more information here:
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_file.htm#CACDHGGG
under section: 4.2.14 Pre-Processing and Post-Processing of Files
Essentially you will use Java to unzip the file first and then the unzipped content will be passed to the adapter.

How to convert .stl file into .xml file. Subtitles to IMPORT INTO FCPro

I have a subtitles file which was created in dvd studio pro. I exported that file and made a .stl file (which can be opened with TextEdit).
I need to import that file into FCP to then make a quicktime file w/subs to be exported.
I'm trying to use TitleExchange which tells you you CAN convert .stl files into .xml (FCPro type of file) but when I try to import the .stl subtitle file into TitleExchange to be converted to .xml I get the following error:
Can't make "" into type boolean. (-1700)
Can someone help?
Thanks!!!
Paula

Can anyone help me?
I absolutely need to import the subtitles into Final Cut and re-writing all of them manually would take forever.
Please let me know if there is any program I need to use.
Thanks for all tips
Paula

How to convert Xls file into Xml file

Hi,
I am trying to convert Xls file into Xml but there is no any direct procedure for it
Pls help me out to convert Xls file into Xml file
Thanks
Anushree

you will require to write a module in your file adapter for the same.
ref: /people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter as mentioned in the earlier post.
Else you can also use Conversion Agent to read the same.
Ref: http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/content.htm

How to connect Webi Report into SAP Portal?

Dear Gurus,
i would like to connect Webi Report into SAP Portal.
Could you please give me the steps to follow to acheive that requirement or send me some documents?
Thanks

Please check the wiki below.
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofBOEXI3.1intotheSAPEnterprisePortal+7.x

How to convert database table into xml file

Hi.
How to convert database table into XML file in Oracle HTML DB.
Please let me know.
Thanks.

This not really a specific APEX question... but I search the database forum and found this thread which I think will help
Exporting Oracle table to XML
If it does not I suggest looking at the database forum or have a look at this document on using the XML toolkit
http://download-east.oracle.com/docs/html/B12146_01/c_xml.htm
Hope this helps
Chris

How to convert Java Objects into xml?

Hello Java Gurus
how to convert Java Objects into xml? i heard xstream can be use for that but i am looking something which is good in performance.
really need your help guys.
thanks in advance.

There are apparently a variety of Java/XML bindings. Try Google.
And don't be so demanding.

Convert a web report into pdf and print (in BW 3.5)

Hello gurus,
i have few web reports ( created using WAD). i am looking for a possibility to convert a web report (viewed in a browser by a user) into pdf and print them and this should be done by pressing a button.
Is it possible in BW 3.5 version?.
could anyone please help me?
Any how to docs. would be really helpful.
thanks and regards
kumar

Here it is
<HTML>

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="DATAPROVIDER_1"/>
         <param name="DATA_PROVIDER_ID" value=""/>
         DATA_PROVIDER:             DATAPROVIDER_1
</object>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value="ZPD_ADHOC_PAGE"/>
         <param name="MENU_BACK" value=""/>
         <param name="MENU_BACK_TO_START" value=""/>
         <param name="SUPPRESS_WARNINGS" value="X"/>
         <param name="MENU_FILTER" value=""/>
         <param name="MENU_FILTER_ON_AXIS" value=""/>
         <param name="MENU_SELECT_FILTER" value=""/>
         <param name="MENU_FILTER_ON_AXIS_CHART" value=""/>
         <param name="MENU_FILTER_CHART" value=""/>
         <param name="MENU_FILTER_DRILL_DOWN" value=""/>
         <param name="MENU_DRILL_UP_GIS" value=""/>
         <param name="MENU_DRILL_DOWN" value=""/>
         <param name="MENU_EXCHANGE_OBJECTS" value=""/>
         <param name="MENU_REMOVE_DRILL_DOWN" value=""/>
         <param name="MENU_SWITCH_AXIS" value=""/>
         <param name="MENU_HIERARCHY_NODE_DRILL" value=""/>
         <param name="MENU_HIERARCHY_DRILL" value=""/>
         <param name="MENU_HIERARCHY_STATE" value=""/>
         <param name="MENU_SORT" value=""/>
         <param name="MENU_CALCULATE_RESULT" value=""/>
         <param name="MENU_CALCULATE_VALUE" value=""/>
         <param name="MENU_CUMULATE_VALUE" value=""/>
         <param name="MENU_DISPLAY_DOCUMENTS" value=""/>
         <param name="MENU_DOCUMENT_CREATE" value=""/>
         <param name="MENU_DISPLAY_DOCUMENT_PROP" value=""/>
         <param name="MENU_DISPLAY_DOCUMENT_SELEC" value=""/>
         <param name="MENU_RRI" value=""/>
         <param name="MENU_EXPORT_TO_CSV" value=""/>
         <param name="MENU_EXPORT_TO_XLS" value=""/>
         <param name="MENU_BOOKMARK" value=""/>
         <param name="MENU_CHARACTERISTIC_PROPERTIES" value=""/>
         <param name="MENU_VALUE_PROPERTIES" value=""/>
         <param name="MENU_QUERY_PROPERTIES" value=""/>
         <param name="MENU_VARIABLE_SCREEN" value=""/>
         <param name="MENU_CURRENCY_CONVERSION" value=""/>
         <param name="MENU_ENHANCED" value=""/>
         TEMPLATE PROPERTIES
</object>
<HEAD>
<META NAME="GENERATOR" Content="Microsoft DHTML Editing Control">
<TITLE>SAP BW Reporting Print Page</TITLE>
<link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
<script type"text/javascript">

</script>
</HEAD>
<BODY>
<TABLE id="tp1" cellSpacing=0 cellPadding=0 width=660 border=0 >
    <TR>
    <TD vAlign=top align=left nowrap>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="MYQUERY"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="GENERATE_LINKS" value=""/>
         <param name="WIDTH" value="660"/>
         <param name="BORDER_STYLE" value="NO_BORDER"/>
         <param name="SUPPRESS_REPETITION_TEXTS" value=""/>
         <param name="BLOCK_SIZE" value="3500"/>
         <param name="SHOW_PAGING_AREA_TOP" value="X"/>
         <param name="TARGET_DATA_PROVIDER_1" value="DATAPROVIDER_1"/>
         ITEM:            MYQUERY
</object>
    </TD>
</TR>
</TABLE>
<SCRIPT type="text/javascript">

</SCRIPT>
<STYLE>
input.ie55   { display: none }
</STYLE>

<STYLE media=print>
.noprint     { display: none }
</STYLE>
<script defer>
function window.onload() {
    if (!factory.object) {
        return
    else {
//     factory.printing.header = "SAP"
//     factory.printing.footer = "SAP"
        if ( varPaperSize == "2" ) { factory.printing.portrait = true; }
        else { factory.printing.portrait = false; }
        factory.printing.Print(true);
        // enable control buttons
/* var templateSupported = factory.printing.IsTemplateSupported();
       var controls = idControls.all.tags("input");
       for ( i = 0; i < controls.length; i++ ) {
           controls<i>.disabled = false;
           if ( templateSupported && controls<i>.className == "ie55" )
              controls<i>.style.display = "inline";
</script>
<P>
<div id=idControls class="noprint" style="VISIBILITY: hidden">
<input disabled type="button" value="Print this page"
onclick="factory.printing.Print(true)">
<input disabled type="button" value="Page Setup..."
onclick="factory.printing.PageSetup()">
<input class=ie55 disabled type="button" value="Print Preview..."
onclick="factory.printing.Preview()">
<input class=ie55 disabled type="button" value="Landscape"
onclick="factory.printing.portrait=false">
<input class=ie55 disabled type="button" value="Portrait"
onclick="factory.printing.portrait=true">
</div>
</BODY>
</HTML>

Converting webi reports into Xml

Similar Messages

Maybe you are looking for