Webi report into HTML format

Hi Frns,
I wanna convert webi report into html format...
Is there any possibility in bo???
I'm using sap bo 4.1 sp2
Regards
Riaz

Hi Riaz,
As per my knowledge Webi report export to HTML format is not possible in BI 4.1
You can raise a request in SAP IDEA's place
Refer the below links for workaround solution
[WebI XI 3.x] Export report to HTML or XML
Does BOE XI 3.1 supports exporting WebI to XML format?

Similar Messages

  • WebIntelligence report in HTML format

    Hello Gurus,
    Can we schedule the WEBI reports in HTML format. If so how? I do not see the option to schedule the WEBI reports in HTML format.
    We are using BOE 3.1 version.
    Thanks in advance,
    Navin
    Edited by: NR on Jun 5, 2009 9:30 PM

    Hi Navin,
    The short answer is no. It is not supported by default. Desktop Intelligence does this. I think it is seen as a competition for the InfoView portal. There are however some good SDK examples that you might be able to use.
    Regards
    Alan

  • Export WebI Report in others formats

    Hi,
    Is there any way to export a WebI report in HTML format. Current only the following output format options are available while scheduling a WebI report:
    1) Web Intelligence
    2) Microsoft Excel
    3) Adobe Acrobat
    thanks!!!

    Hi Alvaro,
    These are the only supported formats. Desktop Intelligence and Crystal support other formats. You might consider the Query as a Web Service which can provide your data as XML.
    Regards
    Alan

  • Converting webi reports into Xml

    Hi all ,
    Can we convert the BO Edge 3.1 Webi reports into XML Format?
    Pls suggest me a solution and if we can convert, pls describe the procedure to be followed inorder to convert the reports into xml files?
    Thanks in advance,
    Thanks & regards,
    Amrita.B

    Hello,
    While this is not possible (directly) for the entire report, you could do one of the following:
    1. If you're on SP2 (or higher), you could publish Webi Report Content as a web service. There is more information in the pdf at http://help.sap.com/businessobject/product_guides/boexir31SP2/en/xi31_sp2_webi_rich_en.pdf (pg 304) .
    2.  Use QAAWS to publish queries used in the report as web services.
    Best,
    Srinivas

  • How to export the report in HTML format for desktop application

    Hi,
    i have wrote the JRC desktop application to export the report and i am able to export it in PDF and other formats as mentioned in "ReportExportFormat" API.
    i would like to know is there any API there which can export the report in HTML format.
    i know it would be possible with web based application of JRC, but how can i do it in desktop application?

    There's no mechanism for static HTML pages that displays the report.
    You can use the CrystalReportViewer DHTML viewer, but that's 'interactive'.
    Sincerely,
    Ted Ueda

  • How to generate my report in HTML format

    Hi
    I am using Forms and reports 6i . How to generate a report in Html format.
    Please explain what are the option available in reports and the way to do
    thanks in advance
    prasanth a.s.

    *specify  desformat=html  in cmd line
    refer
    * Forms Reports integration 6i
    http://otn.oracle.com/products/forms/pdf/277282.pdf
    [    All Docs for all versions    ]
    http://otn.oracle.com/documentation/reports.html
    [     Publishing reports to web  - 10G  ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [   Building reports  - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [   Forms Reports Integration whitepaper  9i ]
    http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    ---------------------------------------------------------------------------------

  • Converting the WebI reports to .txt format

    I have developed reports using Web Intelligence, now the requirement is to convert these webI reports to .txt format.
    I am able to do it after dowloading the report into .CSV format but i wanted to convert these reports directly to .txt format and schedule these reports using a third party tool (ASG Zena).
    can anybody please respond to this query if they have any idea or have done it already.
    Thank you in advance.
    Regards,
    Saradhi.

    Hi,
    you can export WebI docs. only in .csv format, not .txt
    Regards
    -Seb.

  • Desktopintelligence report in HTML format

    Hello Gurus,
    I have to schedule a Deski report in HTML format. But when I schedule the report, the html format will will be saved in 'section by section' mode automatically.
    Waht properties should I change to save in 'All in one page' mode?
    Thanks,
    Naveen
    Edited by: NR on Apr 30, 2009 8:33 PM

    Hi Naveen,
                      Even I am facing a similar problem while exporting the reports to HTML format. All the sections in the report appear on different pages,and there's no option for getting them on a single page. As of now, there does'nt seem to be a direct solution for this issue, however, I got rid of this problem by using 'Breaks' in my report instead of 'Sections'. For example, if you are having a report which displays section-wise data, and you have applied the section on say, 'Cities' (which means you will get the city-wise data). You can remove the section and drag the 'City' field into the table, and then apply a break on it. You may also enable the option of 'Centre Value Across Break' which would give the report a better look.
    Regards,
    Alok.

  • How to convert table content into html format?

    Hi,
    Experts,
    How to convert internal data into HTML format is there any function module or piece of code to download content into HTML.
    Thank u,
    Shabeer Ahmed.

    Then use this code....
    REPORT  ytest_table_html1.
    *        D A T A   D E C L A R A T I O N
    *-HTML Table
    DATA:
      t_html TYPE STANDARD TABLE OF w3html WITH HEADER LINE,
                                           " Html Table
    *- Declare Internal table and Fieldcatalog
      it_flight TYPE STANDARD TABLE OF sflight WITH HEADER LINE,
                                           " Flights Details
      it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
                                           " Fieldcatalog
    *-Variables
    DATA:
      v_lines TYPE i,
      v_field(40).
    *-Fieldsymbols
    FIELD-SYMBOLS: <fs> TYPE ANY.
    *        S T A R T - O F - S E L E C T I O N
    START-OF-SELECTION.
      SELECT *
        FROM sflight
        INTO TABLE it_flight
        UP TO 20 ROWS.
    *        E N D - O F - S E L E C T I O N
    END-OF-SELECTION.
    *-Fill the Column headings and Properties
    * Field catalog is used to populate the Headings and Values of
    * The table cells dynamically
      CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
        EXPORTING
          i_structure_name       = 'SFLIGHT'
        CHANGING
          ct_fieldcat            = it_fcat[]
        EXCEPTIONS
          inconsistent_interface = 1
          program_error          = 2.
      DELETE it_fcat WHERE fieldname = 'MANDT'.
      t_html-line = '<html>'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '<thead>'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '<tr>'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '<td><h1>Flights Details</h1></td>'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '</tr>'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '</thead>'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '<table border = "1">'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '<tr>'.
      APPEND t_html.
      CLEAR t_html.
    *-Populate HTML columns from Filedcatalog
      LOOP AT it_fcat.
        CONCATENATE '<th bgcolor = "green" fgcolor = "black">'
            it_fcat-scrtext_l
            '</th>' INTO t_html-line.
        APPEND t_html.
        CLEAR t_html.
      ENDLOOP.
      t_html-line = '</tr>'.
      APPEND t_html.
      CLEAR t_html.
      DESCRIBE TABLE it_fcat LINES v_lines.
    *-Populate HTML table from Internal table data
      LOOP AT it_flight.
        t_html-line = '<tr>'.
        APPEND t_html.
        CLEAR t_html.
    *-Populate entire row of HTML table Dynamically
    *-With the Help of Fieldcatalog.
        DO v_lines TIMES.
          READ TABLE it_fcat INDEX sy-index.
          CONCATENATE 'IT_FLIGHT-' it_fcat-fieldname INTO v_field.
          ASSIGN (v_field) TO <fs>.
          t_html-line = '<td>'.
          APPEND t_html.
          CLEAR t_html.
          t_html-line = <fs>.
          APPEND t_html.
          CLEAR t_html.
          t_html-line = '</td>'.
          APPEND t_html.
          CLEAR t_html.
          CLEAR v_field.
          UNASSIGN <fs>.
        ENDDO.
        t_html-line = '</tr>'.
        APPEND t_html.
        CLEAR t_html.
      ENDLOOP.
      t_html-line = '</table>'.
      APPEND t_html.
      CLEAR t_html.
    *-Download  the HTML into frontend
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = 'C:\Flights.htm'
        TABLES
          data_tab                = t_html
        EXCEPTIONS
          file_write_error        = 1
          no_batch                = 2
          gui_refuse_filetransfer = 3
          invalid_type            = 4
          no_authority            = 5
          unknown_error           = 6
          header_not_allowed      = 7
          separator_not_allowed   = 8
          filesize_not_allowed    = 9
          header_too_long         = 10
          dp_error_create         = 11
          dp_error_send           = 12
          dp_error_write          = 13
          unknown_dp_error        = 14
          access_denied           = 15
          dp_out_of_memory        = 16
          disk_full               = 17
          dp_timeout              = 18
          file_not_found          = 19
          dataprovider_exception  = 20
          control_flush_error     = 21
          OTHERS                  = 22.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    *-Display the HTML file
      CALL METHOD cl_gui_frontend_services=>execute
        EXPORTING
          document               = 'C:\Flights.htm'
          operation              = 'OPEN'
        EXCEPTIONS
          cntl_error             = 1
          error_no_gui           = 2
          bad_parameter          = 3
          file_not_found         = 4
          path_not_found         = 5
          file_extension_unknown = 6
          error_execute_failed   = 7
          synchronous_failed     = 8
          not_supported_by_gui   = 9
          OTHERS                 = 10.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    none of the above function modules r obsolete...

  • Save a the output of a SAP report into Html

    Hi , I have a SAP report which in MM to determine pro rate factor of oil & water for the  given combination of  plant, storage location, material, period and   year  . When we run the report it produces a report which can be printed and signed by managers, I wnat to save this to N drive automatically for future use just incase something goes wrong .So I want to save this automatically in html in the N drive, how do I do that please.
    Thanks
    Aarav

    Hi ,
    try this
    USE THE FM
              CALL FUNCTION 'WWW_HTML_MERGER'
                   EXPORTING
                        template    = rep_template
                   IMPORTING
                        html_table  = html[]
                   CHANGING
                        merge_table = merge_table[]
                   EXCEPTIONS
                        OTHERS      = 1.
    I think this will convert the output into HTML format.
    So in the HTML[] you will have the data.
    NOW upload this data into the N drive.
    I got this code from
    include FGRWEF98B_F98_BATCH_OUTPUT_CLO.
    Check this include .
    Regards,
    Venkatesh.

  • Cells merge issue when extracting webi report in excel format

    Hi Experts,
    We have some WEBI reports in BO XI 3.1.
    The reports have header where we are showing report name and some values which user selects in prompt.
    Now the issue is that when we save our webi report in excel format, many cells get merge.
    I have read many post on scn which suggest some solutions like changing the autofit width option to no and aligning the header width with colums.
    Tried both the option but no success.
    Is there any other way to achieve this.
    Thanks in advance,
    Regards,
    Rishabh

    Hi,
    We managed to find the workaround for this merge cell issue.
    Sharing it might be helpful for someone.
    - Align the report name and other block in report in such a way that the ends are in line with the end point of any column. The only limitation is that when applying pivot to the excel output we neet to click on any of the ccolumn so that excel identify the data set.
    - Second workaround is to break the webi document in two parts report1 will contain the report name and the block to show the prompt values selected by the user where as report2 will contain the table withactual data. The only limitation with this workaround is that when exporting the repot output to excel we will get two tabs in the excel sheet one containing the prompt values and secont tab containing the actual data.
    Regards,
    RS

  • Unable to save webi report in excel format

    Hi All,
    I have a question. I recently upgrsded my internet explorer from IE 7 to IE 8.
    Previously, i was able to save webi reports in excel format without any issues.Even after upgrading to IE version8, i was able to save webi reoprts to excel without any issues for 2 weeks.
    Suddenly I am unable to save Webi reports in excel format now.When I select the Save to my computer as Excel option the saving dialog box appears and hangs forever.
    Can someone please advise me on this??
    Please hel as it is very urgent.

    Hi All,
    Trying to replicate WEBI Excel Download issue.
    Operating system : Windows 7
    Internet Explorer : IE8 Version 8.0.7600.16385CO.
    Jre Version : 1.6_ greater than 1.8 version.
    If anybody having above specifications in your machines Please try to save a webi reports to excel format and send me the results.

  • Scheduling deski report to html format fails

    We're running boxi 3.1 SP4 on a Linux redhat machine. When scheduling a deski report to html format to unmanaged disk, the report stays in processing state for 10 minutes and then it goes to failed state with error "Object failed to run due to an error while processing on the Job Server" . Additionally I get the message "The scheduler component failed the object identified by <jobnumber>. The job associated with the object was unresponsive."
    Scheduling to other formats works fine. I have tracing on but there's not any hint in the logfiles. The htm file and it's subdirectories are created on the temporary location /data/procSched/<name>.DesktopIntelligenceJobServer but it's not copied to the configured destination. It is not an issue with permissions, the server has write permissions to the directory.

    Hi Clive,
    since your are in XI R2 you can only try to modify the layout of your report. In XI 3.x a new feauture was introduced, which allows the user to choose between keeping the layout or facilitating further processing in Excel when exporting a document in Excel.
    Regards,
    Stratos

  • How to Export SSRS report into Excel format using query string

    Hello all,
    I am new to SSRS world.
    Last night i was trying to add a hyperlink  on the SSRS report (.rdl) file, by clicking which we can export the report into "Excel" format, but with no luck.
    Can anybody tell me how to form the hyperlink, so that we can export the report with its current content ( I mean the report content generated by selecting some parameter values)

    Hi Suman85,
    Based on your scenario, you want to add a link on the SSRS report file, and then click it you can export the report into “Excel” format.
    Just as kishan1901 said , you can add a textbox to your report and type in the words “Click here and export the report
    to excel” .Then right-click the textbox and select Properties. Switch to Navigation tab, click the radiobutton of ‘Jump to URL’ and type in the expression ,here is just a example:
     ="http://vyof1884200/ReportServer$youhoo?/My+Adventure+Works/Product+Sales+and+Profitability+by+Month&rs:Command=Render&rs:Format=excel"
    Then preview the report ,you will see
    Click here and export the report to excel 
    when you move the mouse to it ,the mouse will become a hand ,then left-click, it will jump out a dialog box to indicate user whether the excel file should be saved , opened or canceled. 
    I think this is what you want, if you have any further requirement, could you please describe it in more detail? We would give you some resolution or workaround.
    Regards,
    Challen Foo

  • Send report in HTML format not in MHTML

    Hi all,
    I need to send report in email in HTML format not in MHTML format.
    Kindly help me.
    Thanks

    Hello,
    As far as I know, we cannot change the rsreportserver.config file to achieve this effect.
    In SSRS, the HTML rendering extension renders a report in HTML format. The HTML rendering extension is the default rendering extension for reports that are previewed in Report Builder and viewed in a browser, including when run in Report Manager.
    There is an article about Rendering to HTML, you can refer to it.
    http://technet.microsoft.com/en-us/library/dd255269.aspx
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

Maybe you are looking for