Cookie question - What you can expect ? URGENT!

Hi everybody.
I have a few questions:
1. Which Ascii values are excluded in Cookies?
when I try to write the zero value ascii , I get the values 128 and 192 instead. Some thing like this also happens with space ascii character.
2. Can we write in the Cookie file without use the set value method ?
3. Can I use non imprimibles ascii values in a cookie value?
Thanks a Lot !!!

1.
the following are reserved characters and need to be encoded.
";", "/", "?", ":", "@", "=" and "&"
the space is also questionable and should be encoded.
look up the term, URL Encoding
you can probably create your own CODEC class using java.net.URLEncoder ?? class
2. no, dont think so.
3. ??

Similar Messages

This is what you can expect from Lenovo ...

Demitric M
Hi Demitric,
Can you please escalate my case to the Lenovo Customer Advocacy Department Director.
Please don't conclude that my request for escalation is a reflection of my dissatisfaction with you or your assistance, as this would be a mistaken conclusion. I was already dissatisfied with my Lenovo experience prior to our contact. I believe you are doing your best, and based on my experience with Lenovo products thus far, you likely have a substantial caseload. I don't fault you for the delay in resolution, seriously.
However, that said, this delay is grossly unacceptable. I purchased my computer in March, and have been dealing with repair nonsense since at least April, which included a pair of bizarre bozos tearing down my machine three times, and inappropriately inserting themselves into our home and subsequent reality. The replacement process has been in motion since early June, with the first few offerings being inferior to the machine I purchased. Then we agree on a suitable replacement and it was at "end of life" status. Now that we've agreed on another replacement machine ... (Model # 59421859, LenovoY50-70AMBKTXMI74710HQ16G5128MUS) it can't be found for any price. Really???
I'll bet folks that ordered that machine from the website have their machines already. Heck, you can buy it on Amazon!
Lenovo also has my credit card on file should I fail to return the defective machine, a.k.a. "rip Lenovo off". Ironically, who's getting ripped off here? Lenovo has my money from the original purchase, and my credit card as back up should I default on the return of this machine. Lenovo certainly has their bases covered, but left the customer swinging in the wind. It's a win : win for Lenovo, and a "go pound sand" for the customer. This is not only totally ridiculous, it's seriously bad business.
I purchased my Lenovo computer with the intent of actually using it. I did not purchase my machine from Lenovo because I desired a customer relations nightmare. I would have stuck with Dell if that were the case.
I've been extremely tolerant, polite and cooperative, which seems to be viewed as a sign of weakness or ineptitude? I am literally at wits end with this nonsense.
Please escalate and advise.
Respectfully,
James "Dave" S.
Moderator note: Full name of Lenovo employee removed per forum rules: .Lenovo Community Participation Rules

and then....... how can i learn where those files go? Logic has always been frustrating in that way. It is so difficult to figure out where are the sound files are stored.
Any pointers, suggestions appreciated greatly.

Logic pro x what you can expect from installation?

Hi There guys.
What exactly is the logic pro x downlaod and install procedure?
How soon after you download the 650MB of data from the app store can you use Logic X?
Right now I am unable to use logic x, its just busy at the "BASIC CONTENT DOWNLOAD" screen... downloading 2 gig of stuff.
Is this normal? Is it only after this download that I can actually run and use logic x?
Cause right now thats all the app does is open a "basic content downloader".
I can see the logic app menu at the top but things like open song etc. are greyed out.
Please if any of you could shed some light, I would appreciate it.
Thanks.

and then....... how can i learn where those files go? Logic has always been frustrating in that way. It is so difficult to figure out where are the sound files are stored.
Any pointers, suggestions appreciated greatly.

SCRIPTER PLUG-IN ; looks like you cannot do more that what you can do with the environment !

Hello
I am very interested of this possibility to develop the equivalent of the Cubase VST expression Map to drive VSL articulation changes
I have read that the score have been re-wrote ! is this true ?
Reading the manual I did not find that it was possible to convert score events (staccato, legato ...) into a midi command to be send to VSL
Also you cannot work on note length.
Looks like you cannot do more that what you can do with the environment !
I hope I am wrong and that this is missing in the manual
Best
Cyril

APPLE, can you reply ?
Depending of your answer I will buy or not buy Logic X

X-Fi "What you can hear" doesn't wor

Hi,
I installed the latest driver for the X-Fi on
Windows Vista Ultimate x64.
I want to use the "What you can hear" option, but this doesn't work!!!
When I go under the Sounds Option of Windows Vista, I can check "What you can hear" as the default device, but it says "Not available". Only the mic device under Recording is "In use", so it works, but not that "What can you hear".
What can I do? I get crazy by trying to get this work. I bought this X-Fi Card, because my old 5. Li've doesn't any new drivers for Vista, and this X-Fi isn't working as well as it is supposed.
Is this currently not supported? Will there be an driver update soon that fix this issue?Message Edited by Rocko on 05-23-20072: PM

Thanks for your answer.
I already tried that, and it didn't work.
Now I got the answer:
As long as one device is in use, you can't switch between microphone and "what you hear" and else...
As Long as one program uses the microphone, as example. A hint for other users..

FAQ: Are there rules for what you can access or target with interactions?

Here are rules for what you can access/target for interactions:
1. You can always target any page/state of your main application
2. You can target the current component (the one you are editing in Edit-In-Place)
3. You can target any component instances in the current component. If your current component contains 2 custom components, then you can target either.
Keep in mind, transitions in Catalyst can only exist between different states of the same component.
Answered by: Bear Travis
See full discussion thread, including examples.

KCvolunteer07 wrote:
I have a lot of code that doesn't need to be checked for errors, so I don't know if I should pull that code out and do multiple try catch statements or just leave it like this...if this makes sense for the program logic you are going for then yes it is ok. I would say though the there should only be one try-catch block per thrower because theoretically each exception thrown has a different meaning for what your program should do in response.

Why your backups are so slow and what you can do about it.

So you know your backup us slow and want to know what's wrong.
Here it is:
1) Transferring files from the iPad to your computer happens at an unacceptably slow rate of ~100 KBytes per second, even though it is connected via USB2. (You are using a USB2 port, right?)
2) The iPad/iTunes backup process introduces a multiple second pause between each and every file that gets backed up. Ugh!
As bad as problem #1 is, it's really problem #2 that is causing everyone serious problems.
Here's what happens: Some applications create many very small files. The free NPR app is one. If you have lots of photos, that can be another. When you back up these tiny files, even though they may be only 1 KB in size, they can take up to 5 seconds each to transfer. In the case of NPR, each jpeg is stored separately and is backed up separately. If you have 500 jpegs, each one is only 2K in size, but there is a 5 second lag between files, you have to wait an extra 2500 seconds (41 minutes!) to back up that 1 megabyte of data.
Why this lag between files? Only Apple knows for sure. My guess is that it is due to the creation of the metafiles sent to the computer during the backup process. If the iPad is generating the metadata as an actual file in flash, the delays might be caused by read-modify-write cycles in flash. I want to say to Apple, why hasn't this been fixed? This problem is obvious to anyone who bothers to take a close look at the backup process. I can't believe they don't know about it. Do you really need so much of a lag between transmitting files? But I digress.
The real question is, what to do about it? The answer is that you have 3 choices:
1) Do nothing and live with it.
2) Turn off backups. There are several apps out there that can do this, just Google it.
3) Figure out which applications are guilty of producing large numbers of files and can them.
To go about #3, get a copy of AppleSlowBackupLiveView from http://files.m4ko.de/applesync/
Start a backup, figure out what folder the backup is being written to, then paste that folder into AppleSlowBackupLiveView and hit the "Check This Backup" program.
Each time a new file is being backed up a new line will appear. If you see the same application appearing over and over and over again, you know that this application is partly to blame. You can hit the Remove Duplicates button to combine all of the entries for a given application into one line and then look at the "Total s" column to see how long it took to back up that application.
Apple really needs to address these two issues, especially the second one as it should be very easy to fix. Simply find out what the iPad is doing between file transmissions and eliminate that problem. If it is prep work, start a new thread on the NEXT file to be backed up while the current one is being transmitted. There are ways to fix this. Please do!

Thank you for this info!
However, you are only communicating with other users, like yourself, here and not anyone from Apple.
If you wish Apple to see and possiblly work toward resolving this issue, you can try sending them feedback here.
http://www.apple.com/feedback/ipad.html

Can I create a result set filter on a SSRS Report similar to what you can do in Excel?

Asking this question in a different way...I have my SSRS Result set. Now the Business User wants to filter down a 15-page report to what they want to specifically see....Sooo my result set has a list of claims. And now the Business User just wants to see
the list of claims by a certain Provider, which is also in the report. So I don't want to put that "filter" on the front-end...within the Stored Procedure that is producing the report because they want to see everything. Is there a way to make SSRS
intelligent enough to parameterize the back-end result set? Or do I need to do it the old fashioned way by allowing for an optional parameter, let them run their report, define the available values by a query similar to the stored procedure filtering, and
let them drill down that way?
I have tried playing around with Dataset filters and a parameter using the existing result set and existing Dataset, but I just cannot seem to get this to work the way I envision. If this entails creating a Function or Procedure within the SSRS, bring it
on...I'm willing to learn. And I do have some VBA experience...so I'm not intimidated.
Again...I apologize for the similar type question, but I felt the need to be a little more clear.
Thanks for your review and am hopeful for a reply.
PSULionRP

I GOT IT!!!
Followed the following...
Here's what I've put into my SSRS Knowledgebase...
Filters/Parameters on the Report Result Set
Request from the Business User to add "parameters" to the Report Result Set. Kind of like auto filtering you can do in Excel
Within the Report Design within Microsoft Visual Studio…
— Insert a new Dataset which is merely carving out the SQL from the working Report Stored Procedure and customizing the SQL for the DISTINCT values that you want
— Insert a NEW Parameter based on the carved out SQL
General → Allow blank value
Allow multiple values
Available Values → Get values from a query
Specify the previously created Dataset
Default Values → Get values from a query
Specify the previously created Dataset
— Insert a Filter back on the original Dataset that is used to create the Report
Expression → Choose the Report Detail Item column name
Operator → In
Value → Physically type in the Parameter Name created previously
Works EXACTLY as I had envisioned. Prompts for the From Date and Thru Date, runs the report, dynamically builds the "optional" parameters/filters,
and then allows the Busimess User to speify or drill down into the result set based on the dynamically built parameter drop-down list.

I am making a purchase on my iPhone for the first time and I set my account up a long time ago I don't remember my security questions what ways can I reset them?

Anything that anyone knows of will help! Thank you

If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

HT201363 How can you reset your security questions if you can't remember the answers?

Hello! my question is how can you reset your security questions if you don't remember the answers?

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106484)

HT5312 if i forget my security questions what i can do ??

if i forget my security quesyions what i can o ??

See if you can get the rescue email from http://support.apple.com/kb/HT5312 and if that doesn't work https://Expresslane.apple.com then iTunes and iTunes Store

HT2105 Are there limits what you can spend on apps and how to change the amount?

Are there limits on spending on apps if so how to increase

When it tells you to contact itunes support, you will have to contact them in order to correct the issue.
You can click Contact Us at the bottom of this page then click Contact Itunes Support

I forgot the answer for secret questions, what I can do..

Please help

Start here
http://www.apple.com/support/appleid/
Start with manage your ID and go from there. You may end up having to schedule a call so you can talk to a person.

What customers can expect from BT customer support...

(In reply to the email at the bottom of this post. I am happy to discuss this with other members but please familarise yourself with the post first. I know its a long one, but I tried to make it as detailed as possible)
Hi Samia,
I don't want to give the impression that I like complaining, so I'll keep this factual until the end:
I signed up for infitiy 2 package with phone line in the first week of July. After purchasing the product online I called to arrange an engineer to visit who would install the product. During this time I asked about the £50 Sainsburys voucher promised at the time of signing up and was assured that they would arrive automatically within several weeks after my product was activated. The broadband went live during the 2nd week of July. One of my parents in a seperate address went through an identical (please understand the meaning of identical) process in all regards and after 4 weeks had not received the £100 Sainsburys voucher promised to her. So I started to contact the customer support team.
I was told by Ravi Prassad on the live chat support that the vouchers would arrive within 5 days for both addresses on Wednesday 9th October - 8 Days ago. There is a full log of this chat included after this email, people can jump to it by searching for reference "Appendix.1".
I was unhappy with his manner during the chat log, it was lackluster, using words like "okay" and "yeah" to answer qualitative questions I posed to him. So I contacted both phone support and the online live chat support again. I was speaking to Harold from accounts on the phone and Mudassir Ali on the live chat. After requesting it, both of them assured me that a manager would contact me, specifically by phone, with my mobile telephone number provided at the time. The time frame was to expect the telephone call from a manager within 24 hours. I did not receive a phone call of any nature on Thursday 10th October. The chat log with Mudassir is also available below entitled "Appendix.2".
On the morning of Friday 11th October I contacted the phone support, this time getting through to a male customer service agent by first name Kin, he had an american accent. Kin apologised for the unprofessional service that I had been given and assured he would rectify the problem. He himself was professional in his conduct and convincing with his words. His exact words were that he had sent an email off to the "corporate office" requesting that I be telephoned that same day as a priority, in light of what had happened during the previous 24 hours. I did not receive a phone call of any nature on Friday 11th October.
On the morning of Saturday 12th October I contacted the support team again by phone and eventually got through to Niscive. He and another colleague tried to further assure me by raising what they referred to as an "Enquiry Confirmation Number" ticket (******-******) and I was once again advised that I would receive a phone call on either Monday or Tuesday.
After this I left it until 6pm on the night of Tuesday 15th October before contacting support again. I got through to a CSA agent who told me over the phone that it was his 2nd day answering calls. I was put on hold often however had told him not to worry about doing so, I simply wanted the issue sorted. After confiding in his colleague several times he assured me me that the vouchers would arrive in 2 days, on Thursday (today, 17th October). He repeated this statement several times before saying that he would personally sort it out if there were any further problems. I then re-raised the question of why management had not contacted me. It took several attempts to get this question through his limited teaching and it was a frustrating experience. In the end he advised me that I could expect a phone call from management with an explanation for the events that has happened. He said the managers name was "John" and I was to expect a phone call within 30 minutes. I received no phone call of any nature on Tuesday 15th October.
I was getting pretty tired at this point, I had spent an estimated 6 hours on the phone to BT trying to solve both problems (lack of vouchers and unsatisfactory customer service) so I decided to wait until today (17th october) to see if the vouchers arrived. Unsurprisingly they did not arrive with this morning's post. Then at 11:30am I receive this email from yourself (at the bottom of this post) explaining that I have to wait a further 3 weeks (15 working days) and you attempt to give me permission to re-open the enquiry after 14 days if unsatisfied, but your wording suggested I was unable to do such a thing before hand. Well this email will be getting posted, in full, on your public forums, as well as printed off and sent to BT head office and Sainsburys (BT are tarnishing their image). I might even pop in to Belfast in person to visit the BT-tower on the Laganside with a copy to hand in in person. I will of course blank any of my own sensitive information when posting this on the forum.
During the various phone calls I experimented with different options. There is set of options on the phone to go through to a complaint line. When selecting these options you get warned by a pre-recorded voice before being notified about being placed in a queue the following; "We are very busy at the moment and it may take considerable time before we can answer your call" as opposed the message you receive on the accounts holding loop "We are very busy at the moment and apologise for the delay, your call will be answered as soon as possible". It is also worth mentioning that there is never a wait on the sales team line at all.
Time for an opinion because this service is nothing short of a joke, and completely sub-standard in compairison to my previous ISP, Virgin who always took their customers very seriously and treated them with respect. BT seem to treat theirs as if they already own the person's credit card and pin code and there is nothing the person can do. Direct debits are not so hard to cancel, so it is within BT's monetary interest at this stage to ensure I don't have wait any longer than 5 working days for the vouchers to arrive. If your system is too slow to process things that quickly perhaps one of the amazingly lazy managers can get off his/her backside and personally purchase and post out the promised voucher to this disgruntled customer.
Appendix.1

All of my personal details were omitted from the original post when the moderator >heavily< edited it removing all of the proving information of what has probably been my 2nd worst customer service experience with a company so far. All of this 5-6 working days stuff is utterly useless too. I want the vouchers sent out as promised by your own customer care team SEVERAL freaking times. I'm going to go off and see if I can find more public methods of name-and-shame because BT and the majority of its employees are completely unwilling to be accountable for their actions.
Oh and the very fact that a moderator has had time to come in and EDIT my original post but not provide support on it, is another joke to add to the book of "BT GOT YOUR MONEY FOOL HAHA".
Just look at these links:
Guardian Newspaper:
http://www.theguardian.com/money/2012/sep/28/bt-broadband-missing-sainsburys-voucher
-I'll be emailing them the transcripts, with all names & codes omitted to respect privacy, but everything else intact.
£100 Voucher not honoured:
http://forums.moneysavingexpert.com/showthread.php?p=63426257
Waiting for 158 Days!!!:
http://forums.moneysavingexpert.com/showthread.php?t=3940163
-Atl least we can enjoy the fact that this is a legal breach of contract and thus all "18 month" terms are out the window.
It's in the post:
http://community.bt.com/t5/Bills-Packages/50-Sainsbury-Voucher-in-the-post/td-p/494455/page/13
Still Waiting:
http://community.bt.com/t5/Bills-Packages/Sainsbury-s-Voucher/td-p/457413
The Wrong Side of 50:
http://wrongsideof50.blogspot.co.uk/2012/11/why-you-want-to-avoid-sainsburys-gift.html
These problems have been plaguing customers for over a year.

Ordered the Airport Extreme Base Station - some questions if you can help?

I have a Windows 7 Home Premium 64 bit IBM ThinkPad T500 laptop I need to connect, and a Windows Vista PC. The ThinkPad has a built-in wirless N card and the Vista has a Belkin N+ USB wireless adapter. Can these both find and connect to the Airport without me installing any software (Bonjour etc) on them?
Since they are using the N+ wireless cards, will they connect to the Airport at 2GHZ or 5GHZ speed? If they can connect at either speed, what controls that?
I also have a MACPro desktop. I was hoping to configure my airport using it and hoped not to have to worry about configuring the other 2 pcs.
My old router was a Belkin n+ 2GHz router. Could I use that router as a repeater with the Airport. How can I do that?
Thanks for any help on these questions.

Welcome to the discussions, Michael!
I can't help on your Windows / PC related questions, but can offer some input on the last two questions.
+"I also have a MACPro desktop. I was hoping to configure my airport using it and hoped not to have to worry about configuring the other 2 pcs."+
You will use AirPort Utility to configure the AirPort Extreme. It should already be on your Mac. Check Hard Drive > Applications > Utilties > AirPort Utility. This will also come on the installation CD.
+"My old router was a Belkin n+ 2GHz router. Could I use that router as a repeater with the Airport. How can I do that?"+
In order to "extend" a wireless network created by the AirPort Extreme(n), you would need another AirPort Extreme, an AirPort Express, or a Time Capsule. The Belkin would not be compatible with an Apple base station for this purpose.
If you connected an ethernet cable from the AirPort Extreme or used a pair of ethernet powerline adapters, then you could possibly configure the Belkin to create a wireless network, but unless it was 5 GHz capable, you would not be able to mimic the 5 GHz "main" network that the Extreme would be creating.

Cookie question - What you can expect ? URGENT!

Similar Messages

Maybe you are looking for