COPA Error - Document "1000000062" is not profit-related and thus could not
Dear Experts,
I have an following issue , please send your inputs for the below issue.
Client is using Make to Sale order scenario ( MTO).
At the time of billing, COPA documents are not getting generated. I also checked if the COPA documents can be generated after VA88 (Make to Sale order settlement. But still the COPA Document for Revenue and Discounts is not getting generated.
Below is the error when KE5ST is executed. I have also checked the note 20254, but couldnt fix the issue .
Error Message - Document "1000000062" is not profit-related and thus could not be transferred
Message no. KF755
Diagnosis
Sales document "1000000062" was not transferred to Profitability Analysis (CO-PA) because it is not relevant for the analyses in CO-PA. This can be due to one of the following reasons (among others):
The document type is not profit-related, such as an inquiry
The sales document shows zero for the quantity
The sales document has been denied
The sales document is locked due to credit reasons
Advance thanks
Sanjai
Hi Sanjai,
I'm facing an issue related to Credit Notes without quantity volume. It is right to have Credit Notes without quantity, but we need to capture these amounts in COPA.
When the CN/DN is posted no COPA document is generated and trying to simulate this through KE4ST I've received the message you've outlined above "
Sales document "XXXXXXXX" was not transferred to Profitability Analysis (CO-PA) because it is not relevant for the analyses in CO-PA. This can be due to one of the following reasons (among others):
The document type is not profit-related, such as an inquiry
The sales document shows zero for the quantity
The sales document has been denied
The sales document is locked due to credit reasons
Do you know how we could capture in COPA these documents which have zero for the quantity?
Thanks,
Jorge
Similar Messages
-
I have read in a tutorial for the board 1200 that I can calibrate it with the Calibration and Configuration Palette in LabVIEW, but I do not have them and I could not download it to access its libraries, so I can only download the NI-DAQ software,What's my best choice and if it is to download the palette with its libraries, how can download it with them?I'd appreciate your answers
If you wish to use your 1200 device in LabVIEW, you must download and install NI-DAQ. When you install NI-DAQ, it will ask you if you would like to install support for LabVIEW. By installing this support, you will then have access to the DAQ pallette in LabVIEW. The DAQ pallette requires that you have NI-DAQ installed.
For more information on installing and using your device, you can refer to the DAQ Quick Start Guide. You can download it from:
http://digital.ni.com/manuals.nsf/14807683e3b2dd8f8625677b006643f0/0eca53fe80911b1f862568560068295d
Regards,
Erin -
my computer hard drive died rather suddenly so i had no chance to do a back up or any thing. i put itunes on my new computer and got my purchased music but my ipod will not sync and i cannot get my playlists onto the computer. is there any way to get my playlists on my new computer and also get my ipod to sync. it is a waste of time to purchase new music and i do not want to purchase a new ipod since i have so much memory left on this one.
Thank you all for your replies. Here is what i ended up doing. I cannot afford any 3rd party software so i went to itunes and manually entered all my playlists. As I had indicated my purchased music was on my new computer just not the playlists and I could not sync my ipod. After I rebuilt all my playlists I tried to restore my ipod to factory defaults/new. All of the steps called for in apple support and elsewhere were not available to me. I connected my ipod, went to my computer, right clicked my ipod, and formatted. That wiped my ipod so when I connected to itunes it then gave me a restore option. I did the restore and all is good in the empire again. I can now buy new music and sync my ipod so I am a happy camper.
Thanks to all. -
made in cosmos help please need it
using System;
using Cosmos.Compiler.Builder;
using System.Threading;
using System.Windows.Forms;
namespace IUOS
class Program
#region Cosmos Builder logic
// Most users wont touch this. This will call the Cosmos Build tool
[STAThread]
static void Main(string[] args)
BuildUI.Run();
#endregion
// Main entry point of the kernel
public static void Init()
var xBoot = new Cosmos.Sys.Boot();
xBoot.Execute();
Console.ForegroundColor = ConsoleColor.DarkBlue;
a:
Console.WriteLine("------------------------------");
Console.WriteLine("WELCOME TO THE NEWLY OS MADE BY THE STUDENTS OF IQRA UNIVERSITY!");
Console.WriteLine("------------------------------");
Console.WriteLine();
Console.WriteLine();
Console.WriteLine();
Console.WriteLine("\t _____
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |___________");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t|_____| |____________| |____________| ____________");
string input;
Console.WriteLine();
Console.Write("\nAbout OS : a");
Console.Write("\nTo Shutdown : s");
Console.Write("\nTo Reboot : r");
Console.Write("\nStart Windows Normaly : n");
Console.WriteLine();
input = Console.ReadLine();
if (input == "s" || input == "S"){
Cosmos.Sys.Deboot.ShutDown();
else
if (input == "r" || input == "R"){
Cosmos.Sys.Deboot.Reboot();
else
if (input == "a" || input == "A"){
Console.ForegroundColor = ConsoleColor.DarkBlue;
Console.Clear();
Console.WriteLine("\n\n\n-------------------------------------");
Console.WriteLine("version: DISPLAYS OS VERSION");
Console.WriteLine("about: DISPLAYS INFO ABOUT ANGRY OS");
Console.WriteLine("hello or hi: DISPLAYS A HELLO WORLD");
Console.WriteLine("MESSAGE THAT WAS USED TO TEST THIS OS!!");
Console.WriteLine("-----------------------------------");
Console.Write("You Want to know : ");
input = Console.ReadLine();
if (input == "version"){
Console.WriteLine("--------------------");
Console.WriteLine("OS VERSION 0.1");
Console.WriteLine("--------------------");
else
if (input == "about"){
Console.WriteLine("--------------------------------------------");
Console.WriteLine("OS IS DEVELOPED BY Qazi Jalil-ur-Rahman & Syed Akber Abbas Jafri");
Console.WriteLine("--------------------------------------------");
Console.Write("Want to go back to the main window");
Console.Write("\nYes : ");
string ans = Console.ReadLine();
if (ans == "y" || ans == "Y")
goto a;
Thread.Sleep(10000);
else
if (input == "n" || input == "N")
Thread.Sleep(5000);
Console.Clear();
for (int i = 0; i <= 0; i++){
Console.Write("\n\n\n\n\t\t\t\t\t ____ ____ ___
Console.Write("\n\t\t|\t\t | | | |
| | | | | |");
Console.Write("\n\t\t|\t| | |---- | |
| | | | | |---");
Console.Write("\n\t\t|____|____| |____ |___ |____ |___| | | |___");
Thread.Sleep(500);
Thread.Sleep(5000);
Console.Clear();
BootUserInterface();
Console.ReadLine();
// Form1 fo = new Form1();
else{
for (int i = 0; i <= 5; i++){
Console.Beep();
Thread.Sleep(1000);
goto a;
while (true);
private static void BootUserInterface() {
Thread t = new Thread(UserInterfaceThread);
t.IsBackground = true;
t.SetApartmentState(ApartmentState.STA);
t.Start();
private static void UserInterfaceThread(object arg) {
Form1 frm = new Form1(); // use your own
Application.Run(frm);
Hi
Jalil Cracker,
>>when user pres n then it must go to a form but error arises and not working good and threading is not respondin
Could you post the error information? And which line caused this error？
If you want to show Form1, you can use form.show() method
Form1 frm = new Form1();
frm.Show();
In addition, Cosmos is an acronym for C# Open Source Managed Operating System. This is not Microsoft product.If the issue is related to Cosmos, it would be out of our support. Thanks for your understanding. And you need raise an issue at Cosmos site.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Please help with "Error writing the project file. The specified module could not be found." error.
I am a student. I've been trying to install and use Visual Studio 2013 Professional for three weeks now and I cannot get it to work. I am now two weeks behind in my Visual Basic class. I've installed, uninstalled, ran the repair option...
I've tried everything I know how to do. I just spent 45 minutes on the phone with Microsoft, was transferred four times and finally told I will have to use the forums to find an answer. I'm almost completely out of patience with this.
I got the software through the Dream Spark program as a student. I installed it with the web installer and it appeared to install fine. When I try to create a new project, I get the error: "Error writing the project file. The
specified module could not be found."
When I exit the application, I also get: "The automatically saved settings file 'c:\users\user\documents\visual studio 2013\Settings\CurrentSettings-2015-02-02.vssettings' is not available for write. You can change this file on the 'Import
and Export Settings' Tools Options page."
Please tell me you can help.Hi,
could you please try the points mentioned here:
http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/0376db8f-4761-4ae5-9af2-98c53216318a#VS_IDE_unexpected_problems to eliminate the possible cause of your issue?
Please update the result in the forum after you try the method above!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey. -
Dear Friends ,
i am using xcode 4.3.2 on snow leopard 10.6.8 , i have updated patches to the system ,
now i am trying to build very simple app that contains one label , a button and a date picker .
when i exclude the date picker everything compiles but when i add a date picker i am getting the following error during the compilation process and my application won't compile properly
Uncategorized , the document "ViewController.xib" could not be opened , the archive could not be read .
i am just wondering what is exactly the problem behind that ,
note , i have removed xcode completely and i reinstalled it but i am still getting the same error.
any help would be highly appreciated from all of you.
best regardsHey hi,
Remove the reference of your ViewController.xib from your project and try to add it again from your project folder. It may works for you. -
VS 2013 Prof. edition always shows "Could not complete the action"
Hi all,
When I open any .ascx file VS2013 always shows alert, and when I close, it shows it again.
Could you help please?
Thanks.Hi Galym,
>>VS 2013 Prof. edition always shows "Could not complete the action"
According to your description, could you please tell if you get this issue when you open any .ascx files in a specific app or all web apps have the same issue?
So if possible, I suggest you can create a simple web project in VS2012 Prof and add a .ascx files under the web project and open it again check if you get same issue.
(1) If you get same issue in a sample web project, I suggest you can try the following suggestion to check this issue.
Step1: I suggest you can try to open these .ascx files in VS safe mode check if you install some Add-ins or extension tools in your VS2013 IDE.
Reference:
https://msdn.microsoft.com/en-us/library/ms241278.aspx
Step2: I suggest you can try to reset your VS setting file by going to Tools->Import and Export Settings check this issue again.
Step3: If the above suggestions still could not work, maybe you will need to repair or re-install the VS2013 Prof check this issue again.
(2) If you just get this error in a specific app, I suggest you delete these .ascx files and then add new .ascx files for the specific app. Or you can directly to ask this issue to the web forum:
http://forums.asp.net where asp.net experts live in.
If you have any update messages about your issue, please free for me.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years
answered in your other thread LR 4 suddenly no longer recognizes files.
-
I downloaded the adobe XI software and it shows in my Adobe download assistant as downloaded but I can not open it and it is not a part of my applications. Very frustrating download process as I just want to convert a PDF file to an editable word document...
Odonnells52 you will still need to install Adobe Acrobat Professional prior to being able to make edits to PDF or utilize Acrobat. By default the installation files have been saved to your download folder.
If you continue to face difficulties with the Adobe Download Assistant then please see Troubleshoot Adobe Download Assistant.
You can also download the installation files directly from Download Acrobat products | Standard, Pro | XI, X if you are unable to locate the downloaded installation files. -
HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?
I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?
-
I was updating my phone to ios7 and due to the lead being pulled it failed during restore, it has ios7 on the phone but everytime i try to restore it so all my pics, apps, music etc is on the phone i get the error message itunes could not restore because back up could not be saved. please help, im using windows xp
Hello agardner37701,
I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode. I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.I have same error except that i get it even when my phone is not connected.
-
How do i restore my iphone when it has been disabled and cannot be restored through itunes because of the error message that says "The iphone software update server could not be contacted
Have you jailbroken this device? This will make the iPhone not talk to the Software Update Server (that signs and accepts software updates) please refer to the following link? Error 3194, Error 17, or "This device isn't eligible for the requested build"
The iPhone will talk to the software update servers, just need to change the host files, it's a simple process, sorry if you were confused about the wording in to top? -
When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!
Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel -
When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?
Hi Amir.09395340646,
Welcome to the Support Communities!
What app are you trying to download? Is it iPhoto for iOS? What error message are you receiving? The first thing I would suggest is to log out of your iTunes Store account on your iPhone. Then restart the device and log in again.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If the above did not resolve your issue, follow the troubleshooting steps in the article below.
The link includes the complete details and screenshots, but I've highlighted a few points for you:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
I hope this information helps ....
- Judy
Maybe you are looking for
-
Is there any way to access files from the Classic environment to my iMac running on Leopard (10.5.8)?
-
IMovie simply won't work. or start. or do anything.
My iMovie will get to the loading thumbnails screen and won't get past there. how do I fix it? none of this create a new user name stuff.
-
How to use kontakt5 with mainstage2?
how to use kontakt5 with mainstage2
-
Hi, I have to display set of items of block B1 and then hide items of block B2 and display set of items of Block B2 and hide items of block B1 based on the user selection. My clarification is that is there any possibility to set the property of the b
-
After getting an UPDATE sign for Photoshop CS 6 the installation never works. The mistake is shown as: Fehlercode: U44M1P7. What does this means ?