Copy and paste page group?

Hello,
Is there a way to copy a page group and paste into a new group instead of creating one from scratch?
Thanks,
-Dong Chen

Hi,
WebDAV ia an extension to the HTTP Protocol - you can use it to manage content on Web Servers. It's a very interesting topic - you can get more information here :
http://www.webdav.org
You can access Portal via WebDAV with a URL of this format:
http://<hostname>:<port>/<dav_location>
E.g.: the default Portal DAV URL is:
http://<hostname>:<port>/dav_portal/portal
You connect to a portal in WebDAV clients using the same user name and password that you use to log in to the portal in the browser interface.
To set up WebDAV and use it :
If you are using Windows :
1. Right-Click on "My Computer" & select "Map Network Drive...."
2. Click on the "Web Folder ot FTP Site".
3. Enter the WebDAV URL for your Portal ( in the format that I have mentioned ).
4. Enter a name for your Folder.
That's it ! You can then see the Page-Group and the pages as folders. You can browse, copy or delete content as you would in your C: or D: Drive.
Regards,
Sandeep.

Similar Messages

  • Copy and paste pages

    Hi
    Any help suggestion !!!!
    I created a web with different products. Two different company sells same products  so I have to do again many pages/ products for the second company (everything inside my web)
    As Muse does not allow  copy and paste pages or group of pages How can I manage for not doing again this hard job, plus change master pages (logos and so on)
    Any idea with save the first page "save as" and begin a new folder ? 
    Any idea / suggestion appreciatted
    Jose Felix

    Many thanks, really helpfull !!!
    Jose Felix Cano Montoya
    Travel Business Consultant
    Tel: 00 54 (9) 11 33 39 22 79
    [email protected]
    El 21/4/2015, a las 20:52, Sanjit_Das <[email protected]> escribió:
    Copy and paste pages
    created by Sanjit_Das <https://forums.adobe.com/people/Sanjit_Das> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/7461487#7461487>
    Muse supports drag and drop , so you can open both pages one from where you will transfer the contents and the other where the contents will be transferred and then you can drag the contents.
    Thanks,
    Sanjit
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7461487#7461487 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7461487#7461487
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Help with using Adobe Muse CC by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 61>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • How do you append, or copy and paste, pages

    Hi, if I'm in a file and want to extract a few pages but not the whole file to another file, is there a quick way to do it? I know you can extract the pages to a separate file, save the file and then insert into or combine with another file but this can be time consuming.
    So is there an easy way to do it?
    Many thanks.

    Thanks again. Yes, you are right though between files it only copies and doesn't move. I'm surprised that there isn't a copy and paste function that works in this way or an append like there is with emails, as dragging and dropping can sometimes be cumbersome.
    But anyway it works so I'll have to live with the way it is.
    Cheers!

  • I am not able to copy and past page links into emails. how can I rectify this problem?

    I have version 11.0.
    I have tried to send page links via email groups that I belong to. It is now very difficult to get that link copied or pasted into a new document. This also includes plain text etc.

    Hi David.J.K.,
    I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
    You should also read through [[Clipboard not working]] and http://kb.mozillazine.org/Clipboard_not_working article.
    Finally, your issue may be because you've been hit with some [https://support.mozilla.org/en-US/kb/Is%20my%20Firefox%20problem%20a%20result%20of%20malware?s=malware&r=0&e=sph&as=s#w_how-do-i-get-rid-of-malware Malware].
    Hopefully this helps!

  • Error while copying and pasting group of activities

    Hi,
    I am getting an error while copying and pasting a group of activities. Can anyone let me know why I am getting this message.
    type : EStringListError
    Event Code : SLDNA-0655-B
    Description : String list does not allow duplicates
    thank you.

    I had the same error and reported it to Oracle. They requested an XER copy and I am waiting for thier response. This problem is for that particular project only. To work around it do the following:
    Create a new project, open both projects, go to wbs view, copy all wbs's from the correpted project to the new project. The new project will work fine and get rid of the correpted one.
    Good Luck.

  • Excel 2013 - Copy and Paste Issue

    if I select and
    copy a cell that contains a formula that references cells all on the same work sheet and
    paste that
    cell in the same cell in the same work sheet in another work book, the pasted cell looks exactly like the copied cell.
    For example, I copied cell V41 from the ‘Rating Summary’ work sheet in the ‘Analysis_Distr#3_QA#3.xls’ file and pasted it in cell V41 in the ‘Rating Summary’ work sheet in the ‘Analysis_Distr#3_QA#4.xls’ work book and obtained
    the following results.
    Copied Cell   "   =IF(AND(FLOOR(U41,1)<=T41,U41>0),FLOOR(U41,1),"N/A")
    Pasted Cell   "   =IF(AND(FLOOR(U41,1)<=T41,U41>0),FLOOR(U41,1),"N/A")
    The pasted cell is exactly the same as the copied cell.
    But, if I select and
    copy a cell that contains a formula that references cells on other work sheets in the same file and
    paste that
    cell in the same cell in the same work sheet in another work book, the pasted cell looks different than the copied because
    the formula in the pasted cell references cells on other worksheets that are now preceded by links to the source work book.
    For example, I copied cell X46 from the ‘Rating Summary’ work sheet in the ‘Analysis_Distr#3_QA#3.xls’ file and pasted it in cell X46 in the ‘Rating Summary’ work sheet in the ‘Analysis_Distr#3_QA#4.xls’ work book and obtained the
    following results.
    Copied Cell   "   =IF(AND(LEFT(J30,1)="D",'Safe Load Capacities'!H27="N/R"),"District Original
    File OPR Ratings",IF(AND(LEFT(J30,1)="D",'Safe Load Capacities'!H27=1),"District Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",OR('Safe Load Capacities'!H27=0.9,'Safe Load Capacities'!H27=0.8),'Safe Load Capacities'!H28="No"),"District
    Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",OR('Safe Load Capacities'!H27=0.9,'Safe Load Capacities'!H27=0.8),'Safe Load Capacities'!H28="Yes"),"District Original File SLC Ratings",""))))
    Pasted Cell   "   =IF(AND(LEFT(J30,1)="D",'[Analysis_Distr#3_QA#3.xls]Safe Load Capacities'!H27="N/R"),"District
    Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",'[Analysis_Distr#3_QA#3.xls]Safe Load Capacities'!H27=1),"District Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",OR('[Analysis_Distr#3_QA#3.xls]Safe Load Capacities'!H27=0.9,'[Analysis_Distr#3_QA#3.xls]Safe
    Load Capacities'!H27=0.8),'[Analysis_Distr#3_QA#3.xls]Safe Load Capacities'!H28="No"),"District Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",OR('[Analysis_Distr#3_QA#3.xls]Safe Load Capacities'!H27=0.9,'[Analysis_Distr#3_QA#3.xls]Safe
    Load Capacities'!H27=0.8),'[Analysis_Distr#3_QA#3.xls]Safe Load Capacities'!H28="Yes"),"District Original File SLC Ratings",""))))
    The pasted cell is different from the copied cell because the formula in the pasted cell references cells on other worksheets that are now preceded by links to the source work book.
    However, if I select a
    cell that contains a formula that references cells on another work sheet but
    copy the
    text for that cell from the formula bar and
    paste the
    text in the formula bar for the same cell in the same work sheet in another file, the pasted cell looks exactly the same as the copied cell.
    For example, I copied the text in the formula bar for cell X46 from the ‘Rating Summary’ work sheet in the ‘Analysis_Distr#3_QA#3.xls’ file and pasted it in the formula bar for cell X46 in the ‘Rating Summary’ work sheet in the
    ‘Analysis_Distr#3_QA#4.xls’ file and obtained the following results.
    Copied Cell   "   =IF(AND(LEFT(J30,1)="D",'Safe Load Capacities'!H27="N/R"),"District
    Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",'Safe Load Capacities'!H27=1),"District Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",OR('Safe Load Capacities'!H27=0.9,'Safe Load Capacities'!H27=0.8),'Safe Load Capacities'!H28="No"),"District
    Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",OR('Safe Load Capacities'!H27=0.9,'Safe Load Capacities'!H27=0.8),'Safe Load Capacities'!H28="Yes"),"District Original File SLC Ratings",""))))
    Pasted Cell   "   =IF(AND(LEFT(J30,1)="D",'Safe Load Capacities'!H27="N/R"),"District
    Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",'Safe Load Capacities'!H27=1),"District Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",OR('Safe Load Capacities'!H27=0.9,'Safe Load Capacities'!H27=0.8),'Safe Load Capacities'!H28="No"),"District
    Original File OPR Ratings",IF(AND(LEFT(J30,1)="D",OR('Safe Load Capacities'!H27=0.9,'Safe Load Capacities'!H27=0.8),'Safe Load Capacities'!H28="Yes"),"District Original File SLC Ratings",""))))
    The pasted cell is exactly the same as the copied cell.
    I want to select, copy and paste a group of cells as described above in ‘red’ but obtain the results as described above in ‘green’; in other words, I don’t want the links to the source work book preceding the references to cells on other work sheets.
    At this point, the only solution I know is to apply the procedure described above in ‘green’ one cell at a time.  As you can imagine, this would be a tedious process if there are sixteen cells to copy involving seventy-two work books. Thanks

    there links might be help for you:
    http://support.microsoft.com/kb/328440/en-us
    KR

  • Copy and paste a page ?

    Hi everybody, and sorry for my English
    I am creating a page with different file /folders. Dos anyone know how can I copy and paste a page I will use in a different folder, and later I just change the links
    thanks for your helps
    Jose Felix

    Sanjit
    Many thanks
    Please can you transmit / inform the people/team in charge: copy - paste - delete pages or group pages WOULD BE FANTASTIC AND IT WILL SAFE US MANY HOURS OR WORK !!!
    Thanks in advance.  You are the best !!!!
    Felix Cano Montoya
    [email protected]
    El 22/3/2015, a las 13:29, Sanjit_Das <[email protected]> escribió:
    Copy and paste a page ?
    created by Sanjit_Das <https://forums.adobe.com/people/Sanjit_Das> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/7328019#7328019>
    Please check this video which shows how you can drag contents from one page to another page :
    http://screencast.com/t/jEaSzbGdGL <http://screencast.com/t/jEaSzbGdGL>
    Thanks,
    Sanjit
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7328019#7328019 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7328019#7328019
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Help with using Adobe Muse CC by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 61>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do I protect it again?

    I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?

    You saved it after setting the Password? :
    Inspector > Document > Document > Require Password to Open
    I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
    Peter

  • How do I copy and paste from one page or file to another page or file - on the same screen?

    How do I copy and paste from one page or file to another - on the same screen?

      Open both of your images in the Editor. Click on the image you want to copy and press Ctrtl+A (select all) followed by Ctrl+C (copy) then click the tab for your other image and press Ctrl+V (paste)
    Alternatively click on your background image then simply drag the second image from the photo/project bin and drop it into the main editor workspace on top of the background image. Use the move tool to position and the corner handles of the bounding box to scale.

  • How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

    With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
    Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
    Does anyone have a solution?
    Thanks in advance.

    Thank you very much. I'll be waiting for you message.
    Messaggio originale----
    Da: [email protected]
    Data: 26/01/2015 17.56
    A: "Umberto Gangi"<[email protected]>
    Ogg:  How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        created by Gilad D (try67) in Creating, Editing &amp; Exporting PDFs - View the full discussion
    Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, &amp; "Stop Following"
         Start a new discussion in Creating, Editing &amp; Exporting PDFs by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Why can I no longer copy and paste a page in the thumbnails view?

    We used to be able to copy and paste, even edit the order of the pages in thumbnail view. Why has ALL of this functionality been removed?! Or is there some special way to do it now that isn't as intuitive?

    Pages '09 should still be in your Applications/iWork folder.
    Pages 5 has had 90+ features removed and a load of bugs added.
    Any sensible user will just say "Pass!"
    Peter

  • HT201301 How do I "Select All" in a Pages document? I would like to copy and past more than one paragraph at a time.

    How do I "Select All" in a Pages document. I would like to copy and paste more than one paragraph at a time.

    I just tab and hold untill the loop shows then let go and I get the menu with select all in it

  • Is it possible to keep the outline auto formatting from Pages when copying and pasting that outline to the Presenter Notes on Keynote?

    I have been using my iPad for my notes, but I want to start using it as a remote for my macbook. When I copy and paste the notes into the Presenter Notes section of Keynote on the macbook, it unformatted. Any bullet point formatting that I do on my macbook is not showing on my iPad's Remote view Presenter Notes. Is there a way to create consistency here that does not involved formatting each one separately?

    Use Drag and Drop
    Have both applications open side by side
    select the text in Pages
    with the mouse drag the text from pages into presenter Notes pane in Keynote

  • Can items from a list be copied and pasted into a new Pages Table?

    In iWork Pages, I have a list of 50's & 60's recording artists and their songs, (which is about 40 pages long) from my '45 rpm record collection for my Jukebox.
    Is there any way to copy and paste the artists' names, and their songs into a Pages Table, so that I can sort the artists' names into an alphabetical list?
    If there is a way, it would save me a ton of work of typing each name into a Table one at a time.
    Thank you,
    Jim

    Recently, I have had documents of lists that I had wanted to put into a Table afterwards, but there was no way that I could do it.... which brought me to my question to the Forum.....
    I had made the artists' listing & songs of about 40 pages, about 7 years ago when I had a PC, and it was done in MS Word, and I haven't worked on it since then. 
    Being a veritable Newbie at the time, I had put the artists' name in one column, and the song title in another.  When I had to insert a new artist and song, I would "Add Row Below" and then type the info in.
    Little did I realize at the time that I had created a Table, without knowing it (I told you that I was a Newbie).
    So when I started to work on those files this morning for the first time in a number of years, I wondered how could I put all the info from that Word document into a Table in Pages.
    Then I could sort Ascending, instead of "Add Row Below" to squeeze the new name in when I wanted to add another artist. 
    Then I realized after posting the question on this Forum, that it ALREADY WAS in Table form. 
    I looked into the help section of Pages and found that I could sort the names in the Inspector Box in the Table Tab.
    So, sorry to say I didn't discover a new technique of copying a list and then pasting the info into a new Table in one shot......
    Sincerely sorry for the false alarm...
    Jim

  • Why can I no longer copy and paste a whole page in page thumbnail?

    Why can I no longer copy and paste a whole page in page thumbnail?

    Apple has removed over 95 features in Pages 5.
    It has also introduced multiple file formats that are incompatible with each over as well as everything else, and numerous bugs.
    Pages '09 should still be in your Applications/iWork folder.
    Peter

Maybe you are looking for