Copy any kind of file from content server to network directory
Helli All
The question:
I nee to copy any kind of file from content server to any network directory.
Explanation
1. transaction CV02N
2. There is attached file for a document in tab "Document data/Original"
3. This file stored in content server
4. I wrote program code that creates path of the stored file that finally looks like
http://cont:8888/ContentServer.dll?get&Version=.....*...&compid=app1.doc
where app1.doc is file's name and I have to copy this file into network directory.
The problem is that this URL open the file instead of just pointing to him
so that no function or method can't see this file and as the result I got message that
the file doesn\t exist.
Please, advice.
Regards,
Daniel.
many many thanks for ur help. i really did not check the URLClassLoader properly.
but i would like to hear a little more from u. i have another question. here in this code (provided earlier), i searched for attribute values in the manifest file, then again i load the required class file from the very url. is it not good to retrieve the whole jar file first, and then check attribute values inside manifest file and load the required class files from that jar file that is already downloaded without going to that url again? how can i do this?
Similar Messages
-
Get files from Content server to Application server
I want to Get few files from Content server to Application server, I have the required Archive ID. It is a HTTP Content server type. Can you please suggest the suitable method for this.
Thanks
Purna> I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface.
Hello Bob,
Yes it is possible.
There can be two ways of doing it.
1. N:1 mapping, BPM will require for this.
N:1 Mapping refer this blog
IDOCs (Multiple Types) Collection in BPM
BpmPatterns CollectMerge
part1 BPM with Patterns explained Part-1
part2 BPM with Patterns explained Part-2
Second option
Create 3 scanarios in integration directory and correspondingly in integration repositoy create different data types, message types, mappings & interface mappings and then in each of scenario us different message interface and interface mapping.
> I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
>
If you are using N:1 scenario then use *.csv in your sender adapter under file name parameter and then all the files will be picked up from same directory.
If you are using second option (3 different scenarios) then also you can pick the different files from same directory. You will be having 3 sender adapters in this case, So, one for picking master data, and another for product data and the last one for transaction data.
So, in case of master data use "plant_*.csv" as a file name and directory name.
In case of product data, use "product_*.csv " as a file name and source directory will remain same.
similarly do it for transaction data.
So by this way all 3 sender adapters will perform their job to pick the different files from same source directory.
Regards,
Sarvesh -
Not able to open the existing PDF files from Content Server in VL02N
Hi All,
In Delivery transaction VL02N, we are not able to open the PDF file attachments which were created in the Past (Ex. 01/01/2014) from the Content Server. Recently upgraded to Enhancement Pack 7 and not sure whether the issue is due to this upgrade.
Kindly check and do the needful.
Thanks,
ParasuramHello,
What error or information did you met?
Are there any information in transaction SLG1?
Regards,
David -
Printing of files from content server
Hello Everyone,
I would like to know if there is any way (like Function module) to print archived documents stored on content server?
Thanks in Advance.
Priyanka Gupta.hi poonam,
Is your original files are strored to content server ?
if yes , then ask to your basis team wheather they have taken the back up or not.
it's purely basis team work
ragards,
nitin
award point if useful -
Restore of file from content server
Hello all,
Is it possible to restore file which is deleted from the content server? If yes state the procedure or steps how to do it.
Regards,
Punamhi poonam,
Is your original files are strored to content server ?
if yes , then ask to your basis team wheather they have taken the back up or not.
it's purely basis team work
ragards,
nitin
award point if useful -
Download PDF file from APP server!
Hi!
Has anyone tried uplaoding and downloding a PDF table from app server as I tried from a normal method by Open dataset, Transfer but it wont work.
Please provide any inputs.
Thanks.Hi park,
1. Using open data set, transfer , close etc,
also it will work.
( it will download / upload any kind of file from app server)
2. Just make sure the
FULL PATHNAME and the FILENAME
are mentioned in EXACT CASE
(small/CAPITAL).
3. U can check thru transaction AL11, to see the file and path.
regards,
amit m. -
How to delete file from Window server
Hi
Can anybody tell me that Is there any function module for deleting file from presentation server like C directory.
Quick suggestion will highly be appreciated!!!!!!!Try this:
CALL METHOD cl_gui_frontend_services=>file_delete
EXPORTING
filename =
changing
rc =
EXCEPTIONS
FILE_DELETE_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
FILE_NOT_FOUND = 4
ACCESS_DENIED = 5
UNKNOWN_ERROR = 6
NOT_SUPPORTED_BY_GUI = 7
WRONG_PARAMETER = 8
others = 9
this is pretty gud approach .
Message was edited by:
Nishant Rustagi -
I want to transfer all the files from source server with respective directory to designation server with respective directory (designation server - oracle reside server).
Is it possible to ftp from one server to another server(designation server - oracle reside server) through pl/sql. these two servers are independent & unix server.No ... The package mentioned in
http://www.oracle-base.com/dba/miscellaneous/ftp.pks
this works for across the server i.e. transfer the files from one server to other (it is basically ftp) ..
So it is NOT correct that this code transfer the file between two location & with in server.. -
I can not copy any files from the server & from the Finder. System MAC OS 10.7.5
<Email Edited by Host>Hi, what is the no boot directory found about???
Can you give details step by step of what you're trying? -
Copy File from Presentation Server to Application Server in Background
Hi,
I need to copy Image file from Presentation Server to Application Server.
The below given code is workking fine in Foreground but whenevr I am trying to execute in Background, the job is cancelled and I am getting a dump.
data : wa_source type string,
wa_destination type string.
wa_source = 'C:\PARBIND.BMP'.
wa_destination = 'D:\PARBIND.BMP'.
start-of-selection.
call method cl_gui_frontend_services=>file_copy
exporting
source = wa_source
destination = wa_destination
* overwrite = SPACE
* EXCEPTIONS
* cntl_error = 1
* error_no_gui = 2
* wrong_parameter = 3
* disk_full = 4
* access_denied = 5
* file_not_found = 6
* destination_exists = 7
* unknown_error = 8
* path_not_found = 9
* disk_write_protect = 10
* drive_not_ready = 11
* not_supported_by_gui = 12
* others = 13
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
In backgound Error is....
Exception condition "CNTL_ERROR" raised.*
Any solution is appreciated.
Thanks
ArbindHi Arbind,
Just realize... when you run it in foreground, you have a foreground to capture the file location. so it runs fine..
but when you are running it in background, there is no foreground to check that is no gui present... how can it check where the C:\.... location is??
no need of reading any oss note... just see.. the name is cl_GUI_FRONTEND_service.. its only for front end..
u need open dataset, read dataset, close dataset kind of things while running in background. or RFCs to read the file... (search SDN). -
How to copy file from application server
Hello experts,
How to copy file from one folder of application server and paste it to other folder of application server(application server is same)?
Is there any function module exists???
thanks in advance
SaurabhHi you can use this function module to move a file from application server to another folder on application server.
call function 'WS_FILE_COPY'
exporting
destination = m_destination
source = m_source
importing
return = return.
Plus u can use this function module to delete the file from that folder from which u want to replace it.
call function 'WS_FILE_DELETE'
exporting
file = m_source
importing
return = return.
The above FM can help u copy a file from one folder to another and delete the file from that folder. -
Display different types of file formats from contents server on web UI
Hi,
I have to read different types of documents from content server and display it in web page using webdynpro abap.
Different types of documents are : Tif, Jpeg, BMP, PNG etc. need to be convert into gif format and display
Txt files as it is.
PDF files as it is.
Microsoft office documents as it is.
ALF files i.e. printlists to be shown on web page.
Please anyone has any information regarding this let me know ASAP.
Thanks & Regards,
Manalihi ,
pls refer the below thread :
Dynamic Use of Mime in component
n check wid thomas reply in the thread :
Create the cached response object that we will insert the content
Well you can manipulate the MIME content at runtime by using the API: CL_MIME_REPOSITORY_API. However if your content is temporary, it is more efficient to just place the content directly into the ICM cache. You don't have the overhead of having to both write and then delete it from the database. Here is an example of how you can do this:
I hope it wud be helpful
rgds,
amit -
Need to copy .txt file from FTP server and downloaded on local server directory.
I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.
Below links will help achieving it:
https://www.virtualobjectives.com.au/sqlserver/ftp_scripts.htm
http://www.mssqltips.com/sqlservertip/2884/sql-server-integration-services-ssis-ftp-task-for-data-exchange/ -
Copy file from FTP server to sap application server
Hi,
I am able to copy a particular file from FTP server to sap application server using FTP_CONNECT, FTP_COMMAND and FTP_DISCONNECT. But here my problem is, it copies into default application server path(DIR_HIOME). I want to copy into specified folder in the application server. How can I specify the required destination path.
Can you please suggest how to achieve this.
Thanks,
Shiva Kankanalatry something like this:
data: user(30) type c value 'ftpuser', "ftp username
pwd(30) type c value 'ftppass', "ftp password
host(64) type c value '255.255.255.255', "ftp server IP
cmd1(80) type c value 'lcd /dump', "location on app server where you want to copy the file
cmd2(80) type c value 'get', "specifies you are going to get the file from ftp server
dest like rfcdes-rfcdest value 'SAPFTPA',
file(15) type c value 'file.txt'. "specifies file that you want to get from ftp server
data: hdl type i,
key type i value 26101957,
slen type i.
slen = strlen( pwd ).
call function 'HTTP_SCRAMBLE'
EXPORTING
source = pwd
sourcelen = slen
key = key
IMPORTING
destination = pwd.
call function 'FTP_CONNECT'
EXPORTING
user = user
password = pwd
host = host
rfc_destination = dest
IMPORTING
handle = hdl.
call function 'FTP_COMMAND'
EXPORTING
handle = hdl
command = cmd1
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
loop at result.
write at / result-line.
endloop.
CONCATENATE cmd2 file INTO cmd2 SEPARATED BY SPACE.
call function 'FTP_COMMAND'
EXPORTING
handle = hdl
command = cmd2
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
loop at result.
write at / result-line.
endloop.
refresh result. -
MAXDB copy log file from one server to the other server.
Hi All,
I want to copy a log file from one server to the other server , the database is Maxdb and i don't know how to do it. I want to do it through command prompt, (set of commands required) the front end tool which we are using is DBM ( database manager). Please help.
Regards
M.AHi,
Basically, the process is of log shipping. Transferring logs from DC to DR system.
For that, you can check HowTo - Standby DB log shipping - MaxDB - SCN Wiki
This is script based. I have not done it but the idea remains the same.
Regards,
Divyanshu
Maybe you are looking for
-
My blackberry wont synch with my mac anymore
I downloaded OS X Mountain Lion and now I can no longer sync my Blackberry Bold with my Contacts or Calendar. I have the most up to date version of the Blackberry Desktop Software for Mac but it still will not transfer any records. Help!!!
-
I have a client who has the latest pages. They are telling me that they can't create a compatible file for earlier versions ('9). I have not upgraded to mavrickes and cannot downlosd the latest version of pages. Is this true...the latest isn't compat
-
Tiff placed in Indesign and set to Multiply mode - potential problems?
I am set to send a file to print and would appreciate any heads up on any potential problems. It's a simple file: cmyk yellow background colour with a bog standard Tiff of black line artwork. Because the Tiff is black artwork on a white background I'
-
Flash content doesn't display in browsers
I recently updated Dreamweaver to 8.0.2. I updated an .swf file, updated the link on my DreamWeaver page and uploaded everything. When I saved the DreamWeaver page a window popped up that said it was modifying the html to work with the updated Intern
-
Aperture purchased from the App Store asking for Serial Number?
Aperture purchased from the App Store asking for Serial Number? Has anyone seen this? I just updated the app and now I can't get in. I don't understand.