Copy application fails

Hi,
I have three apps in my appset, legal (for consolidation), rate and ownership. I now want to add 2 user defined dimensions to my consolidation.
Step 1: define the two dimensions
Step 2: add members to the new dimensions
Step 3: add new app (as a copy of legal app) and add new dimensions
In step 3 I add a new app, type consolidation, select legal as the basis and then deselect to copy the dimensions as are. Instead, I add the two new user defined dimensions.
BPC does create a new app but without the extra dimensions. Has anyone got an idea why?
Thanks.

I tried setting the Journal parameter to 0 for that one application yesterday but still getting the error. I changed it from NULL to 0 in the table tblApp itself, no scripts.
Here's the error that gets logged to my client log file:
#2.0 #2011 03 15 13:32:10:530#-4:00#ERROR#AppSetClient##EPM-BPC-MS##0eb7cf55-f3d6-4e43-baaf-9ab0ba7c0d3d###AdminApplicationMgr::Move_Right#[USERID]########Plain##[LOG ID:169]System.InvalidCastException: Conversion from string "" to type 'Integer' is not valid. ---> System.FormatException: Input string was not in a correct format.
   at Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String Value, NumberFormatInfo NumberFormat)
   at Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String Value)
   --- End of inner exception stack trace ---
   at Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String Value)
   at Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(Object Value)
   at OSoft.Consumers.Admin.AppSetClient50.AdminApplicationMgr.Move_Right()#

Similar Messages

Firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.

Win XP Home SP2
Installed Firefox, but receive the following error message:
firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.
Have uninstalled and reinstalled several times, but same message. Firefox won't even open.

Usually someone has been down the track before and occasionally they post some useful details which may help others to investigate and/or eliminate factors in their particular case.
This AccessibleMarshal.dll error seems to have a long history --- posts from 2006 with early Firefox versions had issues similar to yours.
There is a link and an excerpt below which could be worth checking in your case,
particularly since it mentions the problem would occur on a clean install (no previous instance of Firefox on the system and Windows before Vista --??)
Have a look here:
https://bugzilla.mozilla.org/show_bug.cgi?id=712960
and the post to read:
'''Mark Banner (:standard8) 2011-12-22 12:55:21 PST'''
"Created attachment 583905 [details] [diff] [review]
Add the Win32 redistributable directory to the mozconfigs"
"Somehow we missed shipping the Win32 Redistributables from Visual C++. We didn't detect this as it would only show on Windows versions less than Vista, and you'd probably only see it if you had a completely clean install, and you didn't have the dlls installed elsewhere (as it appears my XP system does)."
"If you're seeing this then you want to copy the following files from a Firefox installation:
Microsoft.VC80.CRT.manifest
msvcm80.dll
msvcp80.dll
msvcr80.dll
The patch I'm attaching updates our configuration files to specify the Win32 redistribution directory, which will then cause the build system to include the files in the build."
.... ends....
The earlier 2006 instances also had the same issue in some cases:
forums.frontmotion.com/viewtopic.php?f=10&t=393
Hope this progresses the search and resolution.
Cheers

I'm getting error "copying files failed. the required file is in use". How do I find the file?

I've found this question is elswhere but no answers. I'm trying to consolidate my library to an external hard drive since I'm pretty sure my current drive is about to fail. The entire process has taken me days due to one error or another. This is my most recent error and so far there is no way around it since it does not show me what file is in use.
Help?

I used "Carbon Copy Cloner" to copy my library from one external disk to another.
The "library" consists of a bunch of files and folders (see links at end). You don't need CCC to copy it, just drag the whole iTunes folder in your Home > Music from one drive to the other.
I pointed my iTunes library to the new location under iTunes preferences.
No, don't do it with preferences. Once you have moved the folder as above, start iTunes with the option key held down and guide it to the library.itl file on the new drive. This is assuming you have been using iTunes's default settings and haven't been managing your media yourself.
I used iTunes to "Consolidate Library" to verify that all files had been moved.
Okay, in doing that you have moved just your media to the new drive but left all your other library files on the old drive.
iTunes succesfully copied/re-attached a lot of files before giving me the error that the disk could not be read or written to.
Try it with my method.
I began to troubleshoot the hard drive by checking the cables and scanning for errors.
This disk checked out fine.
I identified the failure and subsequent error was due to corrupted files.
I watched the consolidation process and was able to see which file it was trying to copy before it errored out.
I deleted the corrupted file and restarted the process (I repeated this numerous times).
When the process seemed to be just about over, I got the error "Copying files failed. The required file is in use."
I'm sure this is likely another corrupted file, however, it happens so fast that I have no way to identify what file is causing the problem. I tried making sure no other processes were running and no other windows or media players were open. I also tried to look for an error log but was unsuccessful.
Any ideas?
Disk Utility will scan for a corrupt directory but I don't think it works on the file level if it is a single file that was corrupted. I know I have seen Carbon Copy Cloner pick up on single file error when I had one sitting on a bad sector of a drive several years ago. If you can identify the corrupt file this way then you will have to use a backup copy since it is unlikely it can be rescued.
If you have Diskwarrior it has a file check utility.
You have, of course, restarted your computer before doing all this, and keep other computer activity to a minimum (don't play music while copying the files and don't use other applications that coupld potential be trying to get access to your files)?
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error

HELP - Application failed codesign verification - iPhone

When I use APplication Loader, or through ITunes COnnect, I get these two errors
1- Noob Alert.app/noob60x60.png: icon dimensions (60 x 60) don't meet the size requirements
2- Application failed codesign verification. Please see the console log for additional details
More INformation
1- If I understand correctly, the icon (png) for the info.plist must be (60x60 pixels), which I did in CS4, and exported as a png, but still get this error ? however the icon loads fine on the 'Sandbox" and on my iPhone
2- I see many people have got this issue before, seems to me I am all confused about security, for a second, so I ran to the CONSOLE and am going to copy and paste the log, I am confused as to why this is happening, as I seem to think I have it set correctly....
- Console LOG -
10-01-25 8:21:10 PM ApplicationLoader[46887] * Codesign error (please ignore invalid option comments): got requirements(0x800000, 541)
Executable=/var/folders/Da/Da31BpsfFq0LB1yT9tv6o++TM/-Tmp-/Archive2.zip/Noob Alert.app/Noob Alert
Identifier=com.Back2Front.
Format=bundle with Mach-O thin (armv6)
CodeDirectory v=20100 size=264 flags=0x0(none) hashes=5+5 location=embedded
Signature size=4288
Authority=iPhone Developer: Katherine Uysal (QCE6HYL37H)
Authority=Apple Worldwide Developer Relations Certification Authority
Authority=Apple Root CA
Signed Time=2010-01-25 8:19:44 PM
Info.plist entries=18
Sealed Resources rules=3 files=8
Internal requirements count=1 size=144
Executable=/var/folders/Da/Da31BpsfFq0LB1yT9tv6o++TM/-Tmp-/Archive2.zip/Noob Alert.app/Noob Alert
got entitlements(0x800400, 312)
codesign_wrapper-0.7.3: using Apple CA for profile evaluation
codesign_wrapper-0.7.3: Caling codesign with the following args:
codesign_wrapper-0.7.3: /usr/bin/codesign
codesign_wrapper-0.7.3: --verify
codesign_wrapper-0.7.3: -vvvv
codesign_wrapper-0.7.3: -R=anchor apple generic and certificate 1[field.1.2.840.113635.100.6.2.1] exists and certificate leaf[field.1.2.840.113635.100.6.1.4] exists
codesign_wrapper-0.7.3: --entitlements
codesign_wrapper-0.7.3: /var/tmp/signingbox/codesignwrapperentitlements.plist
codesign_wrapper-0.7.3: /var/folders/Da/Da31BpsfFq0LB1yT9tv6o++TM/-Tmp-/Archive2.zip/Noob Alert.app
/var/folders/Da/Da31BpsfFq0LB1yT9tv6o++TM/-Tmp-/Archive2.zip/Noob Alert.app: valid on disk
/var/folders/Da/Da31BpsfFq0LB1yT9tv6o++TM/-Tmp-/Archive2.zip/Noob Alert.app: satisfies its Designated Requirement
test-requirement: failed to satisfy code requirement(s)
10-01-25 8:21:10 PM ApplicationLoader[46887] * Error: /Users/chance/Desktop/NoobAlert/build/Release-iphoneos/Archive2.zip: validation failures: (
"Noob Alert.app/noob60x60.png: icon dimensions (60 x 60) don't meet the size requirements",
"Application failed codesign verification. Please see the console log for additional details"
as a troubleshooting step, I did check and make sure my iPhone could run that app, and it runs it fine externally no problem

1.) 57 X 57 pixels.
Spelled out in the 'Program Portal User Guide' (step 12, pg. 58*) and when the error is reported during an upload via ITC, at least in my experience.
+*"Click ‘Build’. (Note: Your binary must contain a flattened, square-image icon that is 57x57 pixels. This icon is displayed on the iPhone or iPod touch home screen.)"+

Application failed to start, cvirt.dll not found error

I built an application with installer, including the runtime engine. When this is installed the application fails to run as it appears to be missing cvirt.dll. I am using Labview 7.1 and have never had this problem before. On a platform where the full labview environment is installed the application runs fine.
Any help much appreciated.
Thanks
Marco

Thanks for the reply Robert.
I have no idea which component requires cvi. I am using GPIB and use the USB through an external dll, which is included in the distribution.
When I manually copied cvirt.dll, cviauto.dll, and cvirte.dll in the system32 folder another error appeared: Can not find RTE directory
When I wrote a simple test program (only a stop button and a loop), it worked fine.
I downloaded a copy of Labview runtime engine and installed that. That did not solve it on my test PC, but did solve it on the PC it was intended for.
My problem seems to be solved for now, but I would like to know if there is a way of preventing this with the application builder.
Thanks for your help.
MarcoMessage Edited by MarcoNZ on 04-19-2005 05:21 PM

A pop up says that the "... application failed to initialize" and give options to close it or fix it but none work.

While I working with or surfing with Firefox and I stop working for a few minutes, 2 to 5 min, a pop up show up saying that the "application failed to initialize..." It gives two options, to cancel it or fix it. none of then work, and to make the pop up go away I just click the "X" to close it. It works and puts Firefox back to work. On the upper left corner of the pop up it shows the name of the file as "Firefox.exe" How can I stop this pop up? What is the problem? Thanks for your help,

That should not happen by just leaving for a time.
Type '''about:support''' in the address bar and press '''Enter.'''
Under the main banner, press the button; '''Copy Text To Clipboard.'''.
Then in the reply box at the bottom of this page,
do a right click in the box and select '''Paste.'''
This will show us your system details.
'''No Personal Information Is Collected.'''
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the
'''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?

Logon.scr Application Error - application failed to initialize properly 0xc0000022

HP G60-414CA Notebook PC, operating system vista home premium
error message logon.scr Application Error - application failed to initialize properly 0xc0000022
I need the windows disk to reset my laptop help

You mentioned that you want to reset your notebook. Is that correct?
Are you able get into Windows? If so, you should be able to make the recovery disks if you have not already done so.
If you need the recovery disks, this link should get the process of ordering them started.
Pre-built systems typically do not have an actual Windows disk available for them anymore. If you want an actual Windows Vista disk, then you will need to purchase a copy from a retailer. Otherwise, the recovery disks will reinstall the original software including Vista.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

The application failed to initialize properly...ctc

When i click on the flash icon i get the following message
the application failed to initialize properly(0xc00000005).
Click on ok to teminate the application.
i have uninstalled all flash programs, rebooted and
reinstalled and rebooted and still getting this message.
anyone have an idea how to cure it
thanks
bob
university of south dakota

Prefs: C:\Documents and Settings\Mike\Application Data\Adobe\Photoshop CS4. Anyway, I hope you are aware that your computer is an unsupported hardware, from processor to graphics card. I'm quite surprised that PS CS4 actualyl works on your system. The one thing of note in your specs is the virus scanner. Is it perhaps set a tad too agressively? This could have ill effects when PS writes the prefs on program exit. At any rate, try to delete the prefs (copy it to a backup location before, just in case...) . Have a look at whether your virus scanner has an eye on it or not. If yes, create an exclusion rule for the directory to prevent future damage. If the crash persists, then check your system event viewer and provide the info you find there. This might tell us a bit more about possibly damaged/ missing DLLs or incomaptible drivers that may be causing the crash. Memory addresses do usually not mean anything, unless you know the app inside out, i.e you are its developer, and know the actual state vs. the suppossed state. That's why nobody around here will be able to make sense of your initial post. I believe, though, the one you posted is merely the initial "app has initialized" thing, which even to a developer doesn't tell much.
Mylenium

The application failed to initialize properly (0xc0000006)?

The application failed to initialize properly (0xc0000006)
That's the message I get when I try to start my Photoshop Production Premium CS4. Nothing "happened", it was working yesterday and now it's not.

Prefs: C:\Documents and Settings\Mike\Application Data\Adobe\Photoshop CS4. Anyway, I hope you are aware that your computer is an unsupported hardware, from processor to graphics card. I'm quite surprised that PS CS4 actualyl works on your system. The one thing of note in your specs is the virus scanner. Is it perhaps set a tad too agressively? This could have ill effects when PS writes the prefs on program exit. At any rate, try to delete the prefs (copy it to a backup location before, just in case...) . Have a look at whether your virus scanner has an eye on it or not. If yes, create an exclusion rule for the directory to prevent future damage. If the crash persists, then check your system event viewer and provide the info you find there. This might tell us a bit more about possibly damaged/ missing DLLs or incomaptible drivers that may be causing the crash. Memory addresses do usually not mean anything, unless you know the app inside out, i.e you are its developer, and know the actual state vs. the suppossed state. That's why nobody around here will be able to make sense of your initial post. I believe, though, the one you posted is merely the initial "app has initialized" thing, which even to a developer doesn't tell much.
Mylenium

Essbase Maintenance and copying applications

Good Morning
My question is in two parts. We are using Essbase version 11, ASO cubes
1) Is it ok to perform maintenance on your cubes while users are in the system? Reason I ask is that there have been times when changes need to be made right away, during the day, when the system is being utilized. If not, what is the optimal environment for making changes (adding an element to a dimension etc)
2) As part of our monthly maintenance - we normally create a copy of a cube, make changes to the copy, delete the original and copy the back up back
For example. I will have a cube called "REPORTING". I will make a copy of this and call it "BACKUP". I will then make the changes to "BACKUP". Once these are complete, I will delete the "REPORTING" cube, then I will copy the "BACKUP" cube and call it "REPORTING". This allows me to make changes with minimal delay to users. However, lately, when copying the cube I have been getting the following error message:
Cannot open object file: E:\Hyperion\products\Essbase\EssbaseServer\app\REPORTING\log\ess00001.dat
Failed to copy application [BACKUP]
The system will not longer allow me to copy the backup cube and call it REPORTING. It will let me copy it if I give it another name
Is my continual copying and deleting of applications ok? Or will it eventually corrupt the databases?
thanks as always for your expert opinions

user3055639 wrote:
Good Morning
My question is in two parts. We are using Essbase version 11, ASO cubes
1) Is it ok to perform maintenance on your cubes while users are in the system? Reason I ask is that there have been times when changes need to be made right away, during the day, when the system is being utilized. If not, what is the optimal environment for making changes (adding an element to a dimension etc)In an ASO cube, you can delete and load slices of data without inturrupting user activity, but if you are making changes to the outline, users have to be off of the cube. Essbase will not let you restructure if there are active users on the cube
>
2) As part of our monthly maintenance - we normally create a copy of a cube, make changes to the copy, delete the original and copy the back up back
For example. I will have a cube called "REPORTING". I will make a copy of this and call it "BACKUP". I will then make the changes to "BACKUP". Once these are complete, I will delete the "REPORTING" cube, then I will copy the "BACKUP" cube and call it "REPORTING". This allows me to make changes with minimal delay to users. However, lately, when copying the cube I have been getting the following error message:
Cannot open object file: E:\Hyperion\products\Essbase\EssbaseServer\app\REPORTING\log\ess00001.dat
Failed to copy application [BACKUP]
The system will not longer allow me to copy the backup cube and call it REPORTING. It will let me copy it if I give it another name
Is my continual copying and deleting of applications ok? Or will it eventually corrupt the databases?
thanks as always for your expert opinionsI guess it depends on how you do the copies. What you describe is something that is done often. It soulnds like something got messed up in the copy. you could try stippong the apps and copying the file from the backup to the reporting app manually. The one thing can you lose by doing what you are is security.

Synchronizer setup - Groupwise PO Trusted Application Failed

Hi,
**Every server is local on LAN**
I am trying to setup this Datasync on SLES 11 which I just downloaded from Novell running on a naked VM. I am able to authenticate LDAP but when it comes to synchronizing the Groupwise PO it gives a fail. The groupwise server is version 8.0x only configured to send mail internally within the domain.
I've added Datasync to trusted applications and issued a Key. I've copied that key to the Datasync server and point to it.
I've issued a server cert to be used by my groupwise PO using gwscrgen.
I've checked that SOAP option in the PO Agent settings
I've double-checked the port for SOAP Internal that needs to be used by the PO.
I have restarted the PO after making the changes.
I am able to telnet to the IP : soap port from the datasync server
But still the Synchronizer setup fails.
Screenshots for reference:
[img=http://s7.postimage.org/g4xv42auv/error_Message.jpg]
[img=http://s7.postimage.org/jd2ch3x4n/PO_agent_settings_in_groupwise.jpg]
[img=http://s7.postimage.org/zcl00nt6f/POsettings.jpg]
[img=http://s7.postimage.org/sdbjf1ilz/POsettings_in_groupwise.jpg]
[img=http://s7.postimage.org/rcbapx1mf/POsettings_in_groupwise_ssl.jpg]
[img=http://s7.postimage.org/cue3hxabb/telnet_to_port.jpg]
Please advice what can I do further to make this work.
I get a GW Error code 0x892B connection refused by foreign host. What does that mean. What host is it talking about that is "foreign"?

Originally Posted by oj43085
Hi,
**Every server is local on LAN**
I am trying to setup this Datasync on SLES 11 which I just downloaded from Novell running on a naked VM. I am able to authenticate LDAP but when it comes to synchronizing the Groupwise PO it gives a fail. The groupwise server is version 8.0x only configured to send mail internally within the domain.
I've added Datasync to trusted applications and issued a Key. I've copied that key to the Datasync server and point to it.
I've issued a server cert to be used by my groupwise PO using gwscrgen.
I've checked that SOAP option in the PO Agent settings
I've double-checked the port for SOAP Internal that needs to be used by the PO.
I have restarted the PO after making the changes.
I am able to telnet to the IP : soap port from the datasync server
But still the Synchronizer setup fails.
Screenshots for reference:
[img=http://s7.postimage.org/g4xv42auv/error_Message.jpg]
[img=http://s7.postimage.org/jd2ch3x4n/PO_agent_settings_in_groupwise.jpg]
[img=http://s7.postimage.org/zcl00nt6f/POsettings.jpg]
[img=http://s7.postimage.org/sdbjf1ilz/POsettings_in_groupwise.jpg]
[img=http://s7.postimage.org/rcbapx1mf/POsettings_in_groupwise_ssl.jpg]
[img=http://s7.postimage.org/cue3hxabb/telnet_to_port.jpg]
Please advice what can I do further to make this work.
I get a GW Error code 0x892B connection refused by foreign host. What does that mean. What host is it talking about that is "foreign"?
Or could this be it: Support | Verify of Trusted Application Failed
Thomas

How to use one application with multiple schema without copying application?

Hi,
Previously we are using oracle forms and by that we can manage by using a set of folders containing fmx and use different schema/database for different customers. so the source code comes from one individual file but used for different database users.
is it possible to do this without copying application in apex?
reason is because if applications are copied for each customer, and in a situation where a page has a bug, the developer must correct multiple pages across all the application. This would not be appropriate to manage.
could this be done in apex? or is there any other approach?

Hi,
An application is tied to its parsing schema, so it is not possible to have one code base which you can then point to different schemas. I have seen some threads relating to dynamically setting the parsing schema, but I don't think it has worked to well, and would not be a supported configuration by Oracle.
The normal way to do this is to have one schema and for each entity where it is logical you will have an extra key which is the customer id. I mention where it is logical, because not every entity needs its own data defined by customer. Some data will be common across all customers, such as lookup data and some entities will comprise child entities by which the data separation will be implied by the parent. You can then use Oracle's Virtual Private Database feature to implement a seperate view of the data through the application, based most likely on the customer who is logged on.
Hope this helps.
Regards
Andre

ITunes v10.6.1.7 "Copying files failed. The File name was invalid or too long."

I'm trying to organize my music files using iTunes 10.6.1.7 and I keep getting the error message "Copying files failed. The File name was invalid or too long."
I've got music folders by artist in both the iTunes Music folder and the iTunes Media/Music folder. When I add certain files by drag/drop they sometimes get lost and I don't want that to happen anymore. I used to just consolidate my music files using the File/Library/Organize Library option and that worked, however now when I do that, I get the error message.
I'm a novice and the only online stuff I see is both confusing and refers to earlier versions of iTunes.
My concern is that I have heard that people lose entire libraries of their music when they trry to fix things like this and I don't want that. If this is of any importance, I have several files called iTunes library and temp library. I have no idea what that all means but I'm scared to death of it.
Also, I can't get to the "re-organize library" link at all. It won't let me.
One thing that be of some interest is that when I pull up the properties of the music and media/music files they are marked "read only" I'm also afraid to touch that!
Please help and please know that I am a dummy. Be kind and be clear. Step by step would be great, with images even better. Thanks.

Perhaps nobody knows the answer? We're fellow users here answering questions in our free time when we think we've something useful to contribute.
You can choose to *Consolidate selected tracks* with a right-click menu. Perhaps if you can identify a specific track that won't consolidate and examine the full path to the file & the path that iTunes would create when it consolidates the problem might become apparent. For example iTunes may not be able to move files if the source or destination path length exceeds 255 characters.
tt2

I had itunes installed on my pc. I received notice to update. I started update but gpt the following message - this application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem. I uninstalled and have tried to reinstall

I already had itunes installed on my pc. I received an update and tried to install it. I got a message
This application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem.
I uninstalled itunes and tried to reinstall. itunes says it has installed but when I try to open itunes I get the same message.
How do I repair/sort out this error/fault
Thanks
David

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Copy application fails

Similar Messages

Maybe you are looking for